@@MayoCarsDR 110% agree. The music of this video is completely unnecessary whereas the clicking open and closed of the solenoid during testing would've been perfectly fitting "music" noise and also informational. The Font color you've used for displaying informational text that narrates and educates throughout this video is hard to read. That makes the content lose significance or possibly be missed entirely due to the hard to read color contrasts which occur from poor consideration for selecting the color of the text. Why not simply narrate the words you are making appear in the screen?! The combination of text supporting/matching the words spoken would be helpful for anyone/everyone to figure out what is going on in the video and to ensure all of your points are clearly relayed and thereby understood by use of a legible font with a highly visible color. Speak! Turn OFF the Piano horror track musical selection you've forced upon this video.
Thanks for the video. Please, my mechanic used 20w50 oil instead of 5w30 in my 2005 Toyota Camry. In my next servicing, is it healthy to correct the oil?
Hi good day..when i connect it with the battery..its opening and closing..but when tested thru multimeter..its only showing 0.01 ohms..does it need to be replaced?
I have Toyota Corolla 121 car and check engine light indicated on the dash board. After the scan it shows VVT-i sensor not working and I replaced it. Still the check engine light is ON and after scan it indicates the VVT-i sensor. But the sensor is working. Do you know any reason for this?
So, if I test it and it comes back at 8.3 (which is obviously above 7.9) does that mean it needs to be replaced? Just didn't know if that is high enough to make a difference.
What happens when a VVT solenoid fails? A malfunctioning VVT solenoid can prevent the valve timing from advancing or retarding as needed. As a result, the engine may exhibit performance problems, such as rough running and poor acceleration
Yay it's a piano telling me what to do
Your viewers need to hear what you are doing, as well as your demo. Your message is obscured with the color of the font and....STOP the music.
Thanks for comment
@@MayoCarsDR 110% agree. The music of this video is completely unnecessary whereas the clicking open and closed of the solenoid during testing would've been perfectly fitting "music" noise and also informational.
The Font color you've used for displaying informational text that narrates and educates throughout this video is hard to read. That makes the content lose significance or possibly be missed entirely due to the hard to read color contrasts which occur from poor consideration for selecting the color of the text.
Why not simply narrate the words you are making appear in the screen?! The combination of text supporting/matching the words spoken would be helpful for anyone/everyone to figure out what is going on in the video and to ensure all of your points are clearly relayed and thereby understood by use of a legible font with a highly visible color. Speak! Turn OFF the Piano horror track musical selection you've forced upon this video.
👏👏🤩👉👍👍👍🙏
I found that OCV is 9.3 ohm, is it still ok or should be replaced by the new one?
Did you replaced it?
Question, is normal my oil control valve has continuity ?
Good job. My question is, how do you test the ground and battery sides of the sensor wires from the ECU?
Thanks for coments, and sorry for late reply,I use repair manual Wiring diagram
Thanks for the video. Please, my mechanic used 20w50 oil instead of 5w30 in my 2005 Toyota Camry. In my next servicing, is it healthy to correct the oil?
Camry 2AZ 2.4L Engine oil 20w50
Camry 2AR 2.5L Engine Oil 5w30
Is ok
Good video... Welldone
What's the part # ?
And I was wondering are there more than 1 valves to replace?
Hi good day..when i connect it with the battery..its opening and closing..but when tested thru multimeter..its only showing 0.01 ohms..does it need to be replaced?
Yes
Do you know what is it’s operating frequency in Hz?
I have Toyota Corolla 121 car and check engine light indicated on the dash board. After the scan it shows VVT-i sensor not working and I replaced it. Still the check engine light is ON and after scan it indicates the VVT-i sensor. But the sensor is working. Do you know any reason for this?
there r two sensor in some cars 1st find and shear code which one sensor problem is it
whoa mines i cant even budge with a screwdriver
So, if I test it and it comes back at 8.3 (which is obviously above 7.9) does that mean it needs to be replaced? Just didn't know if that is high enough to make a difference.
Thanks for comment,If you checked it in cool condition and it turned out to be 8.3, I would like to change it.
Good work
Thanks 👍
Nice
Good job
Thanks for your help do this
Thanks for comment
If this is bad..does it cause crank and no start issue?
What happens when a VVT solenoid fails?
A malfunctioning VVT solenoid can prevent the valve timing from advancing or retarding as needed. As a result, the engine may exhibit performance problems, such as rough running and poor acceleration
@@MayoCarsDR does faulty vvti sensor correlate with bad fuel consumption?
@@yodaeee bad performance and poor engine running will translate to bad fuel economy
Thanks for the simple explanation
Thanks for comment
@@MayoCarsDR I want to ask you what is the function of this sensor, please
Thanks for sharing
You welcome sir
Where can i find the filter of vvti solenoid in my camry 07?
Henerson Ursua Thank you for comment
Henerson Ursua ruclips.net/video/-pPdRTr4TKQ/видео.html
I got camry 2007 and the rpm at idle is 890-915rpm,is it possible that the vvti is dirty?according to the manual it should be 715rpm at idle,
Henerson Ursua Have you cleaned the VVTI valve filter
Not yet,is it posible that dirty vvti filter is the prblem?