I fixed it on my own with soldering Iron and a heat air gun. Its the 4R7 Chip it had no contact. After fixing it my Avalons 3 Nanos working great again.
Technically warranty cannot be void in USA. You are allowed to open and service. As long as your not physically modifying or damaging your fine to reseat the fan plugs.
I have an odd quirk with my 3 Nano's (one black and two blue) they seem to mine fine for about 25 days straight (each) then have individual (fan) temper tantrums. Ramping up and slowing of mining, GUI warnings. What I do is unplug let it set a bit, blow them out with an air duster then reboot/start. They seem to recover fine and go back to mining. Its still warm here so I currently only mine at medium speed here (in the house) since I've had them.
My peach one does the same. But what I do is just unplug it for a second then it is fine. Also I have only been running it on medium. Right out of the box it didn't like high and crashed the first two times I tried it. Waiting till cooler weather to try that again. Still get 3.25 to 3.5 out of it so no biggie
I have a Black one No issues and its been a month and a half on HIGH. You can look to see if anything needs to be repasted. I bought a box of small heat sinks for a PI and they fit in this nano miner they will drop the temps drasticly just remember to put the fins in the direction of the fan
I took one apart, flipped the fans to make the display the direction i wanted (you can't flip the display) I changed them back due to the heat put on the board. I don't buy stuff like this for a warranty , just to tinker with. You may have a bad power stage on it as the temp is not displayed properly. Did you do the security bios update? It has to be done through the app which is aggravating
I have 7 that just have connectivity issues all the time . Tower setup seems to be good heat dispersion and make sure I have some airflow behind the tower
Man, I was worried that was the one you got from me at first! My blue Nano did the same thing, it's still offline, but I'm stealing a fan to put in a yellow one with a noisy fan... Jellyfish
never had so much trouble just trying to order one of these, horrible experience. Customer doesn't take normal payments like any other business. Bank transfer?? Seriously as one of your options lol Not happening. Would be nice if they just did credit card or debit card straight to there business, credit card is rerouted to some other entity, sus as f.
It is a bad design. As someone who was the first 300 people to pick one of these up. On High after 4 months the device does not run 24/7. I have to restart the machine because it gives me hash errors. It’s not over heating because I tried the same exact thing on low and after about 15 days the machine will hash very little. It’s also illegal to have void stickers now in USA. I hope they know that.
I hope they get sued to oblivion. I ordered one with a cord and they sent it without it. Havent been able to find one and they refuse to send me one saying I didnt order it. so I have 130 dollar paper weight. that company can go screw themselves.
I fixed it on my own with soldering Iron and a heat air gun. Its the 4R7 Chip it had no contact. After fixing it my Avalons 3 Nanos working great again.
Had the exact same issue, all repaired now and running. If anyone sees this and think they have the same issue, on the GUI your temp will read -270c
thx my 4R7 is burned out
Technically warranty cannot be void in USA. You are allowed to open and service. As long as your not physically modifying or damaging your fine to reseat the fan plugs.
I have an odd quirk with my 3 Nano's (one black and two blue) they seem to mine fine for about 25 days straight (each) then have individual (fan) temper tantrums. Ramping up and slowing of mining, GUI warnings. What I do is unplug let it set a bit, blow them out with an air duster then reboot/start. They seem to recover fine and go back to mining. Its still warm here so I currently only mine at medium speed here (in the house) since I've had them.
My peach one does the same. But what I do is just unplug it for a second then it is fine. Also I have only been running it on medium. Right out of the box it didn't like high and crashed the first two times I tried it. Waiting till cooler weather to try that again. Still get 3.25 to 3.5 out of it so no biggie
I have a Black one No issues and its been a month and a half on HIGH. You can look to see if anything needs to be repasted. I bought a box of small heat sinks for a PI and they fit in this nano miner they will drop the temps drasticly just remember to put the fins in the direction of the fan
Just wait until you hit the 4 month mark on HIGH
@@TurtleFootMining maybe i was running like 147 then installed the heatsinks it went down over 20 degrees. hope that helps me get past the 4 months
I took one apart, flipped the fans to make the display the direction i wanted (you can't flip the display) I changed them back due to the heat put on the board. I don't buy stuff like this for a warranty , just to tinker with. You may have a bad power stage on it as the temp is not displayed properly. Did you do the security bios update? It has to be done through the app which is aggravating
I have 7 that just have connectivity issues all the time . Tower setup seems to be good heat dispersion and make sure I have some airflow behind the tower
Try replacing the fans
Man, I was worried that was the one you got from me at first!
My blue Nano did the same thing, it's still offline, but I'm stealing a fan to put in a yellow one with a noisy fan...
Jellyfish
How to fix it same issue i got it send it back for repair ??
just got a white one and it’s shutting down within 10 minutes of running. they’re clearly bad batches currently
Haven’t had any troubles from mine… mostly because it is still in the box. 🥁🥁😂. When I get back home it gets set up.
never had so much trouble just trying to order one of these, horrible experience. Customer doesn't take normal payments like any other business. Bank transfer?? Seriously as one of your options lol Not happening. Would be nice if they just did credit card or debit card straight to there business, credit card is rerouted to some other entity, sus as f.
What power supply do you use?
My nano never worked since day 1 . Starts up then turns off within 30 seconds. Any ideas ?
Power adapter?
@ Maybe, I received one with the Avlon 3. There is no power at all now so it’s likely that. But even before no power it kept turning off. 🙄
did you try to update the miner with the app
They sent me a fan
It is a bad design. As someone who was the first 300 people to pick one of these up. On High after 4 months the device does not run 24/7. I have to restart the machine because it gives me hash errors. It’s not over heating because I tried the same exact thing on low and after about 15 days the machine will hash very little. It’s also illegal to have void stickers now in USA. I hope they know that.
Im waiting for winter
We are sorry to hear that you're having issues with your Avalon Nano 3! Sending you a message now.
I ran mine for 4.5 months and then it died. I don't recommend buying one even at $100.
I hope they get sued to oblivion. I ordered one with a cord and they sent it without it. Havent been able to find one and they refuse to send me one saying I didnt order it. so I have 130 dollar paper weight. that company can go screw themselves.
I lost mine and reorder one on canaan and they didn t ask anything . They even made a mistake and send me 2 cords 😂