High Pressure Fuel Pump Replacement Yukon Tahoe Suburban Sierra,Silverado, Escalade GM P0175, P0172
HTML-код
- Опубликовано: 26 авг 2024
- Yukon / Tahoe / Suburban / Escalade Owner’s manual Bells & whistles
• Yukon / Tahoe / Suburb...
Inch pound torque wrench amzn.to/3ES83ZE
Fuel Pump alignment tool amzn.to/3ryijmF
Intake Manifold Gaskets (Verify compatibility) amzn.to/458RByO
Line wrench 17mm amzn.to/3RyKH2J
17mm crows foot amzn.to/48pmu50
Fuel line(you could probably replace this line only) (Standard brand) GDL109 amzn.to/45eHQ2d
Fuel line (Standard brand) GDL704
High Pressure Fuel Pump GDP105 (standard brand)
Spark plugs iridium 12622441. amzn.to/46hSu9F
Fuel line disconnect tools amzn.to/48zmQGe
I am an amazon affilate, so purchasing through the links I provide may support the channel with a small referral commission.
One of the best repair videos I’ve ever watched in all things, regardless of what I was trying to repair. Well done!
Good job thank you😊
Very descriptive video, anyone can watch this video and tackle this job.
Thank you I needed that helped me out
What was the torque pattern for the intake manifold? I didnt see it in the description. Thanks.
Wow, what a hassle! I won't complain about pulling the intake on my Escape 3.0 to change the back 3 plugs ever again. Thanks for this vid..well done man!
Direct injection has been a bad thing for this generation GM. The need for a high pressure fuel pump and the gunk from not cleaning the intake ports (if you haven’t seen that video) ruclips.net/video/Op2nSHkoD1Q/видео.htmlsi=D0tkUEYHNPATl0Y3
You're so right, Danny! My girlfriend has the Hyundai Santa Fe Sport with the 2.4 and GDI. I did the intake cleaning once for her at 20,000 miles, but now she is Let It Go another 50,000 without a cleaning and it's starting to run rough and get poor mileage. I fear she may just be looking at an intake teardown. The best thing they ever did was go back to port and GDI combined IMHO. I'll definitely check out your second video I enjoy your content! I always appreciate someone who takes the time and effort to help other people.
think my Escalade needs this done.. where are you located?
Just curious. Did you change oil after to. Im attempting this job tomorrow. Im seeing you should change oil after also.
I did, but I was also doing lifters. I would change it since fuel and other debris may get into the oil DOD AFM Delete Yukon, Tahoe, Silverado, Sierra, Escalade 6.2L & 5.3L Replace cam & lifters Part 1
ruclips.net/video/cWayyZGNYRI/видео.html
Anyone know if all Yukons have this high preassure pump along with the fuel tank pump ? 2 pumps ? Or does this high preassure pump apply to flex fuel vehicles only ?
I believe all 2015+ Yukons will and are direct injection
@dannyjohnsonsgarage Is it just the high pressure pump for a 2017 tahoe premier? Thanks
Do all model engines have this high preassure fuel pump or is it flex fuel Yukons only ?
Awesome video by the way
I believe all 2015+ because they are direct injection for the fuel.
@@dannyjohnsonsgarage damn, so they have the pump in the tank and this high preassure pump ?
Where did you put the windex on that sensor? I am having the hardest time taking that sensor out
Just where the security clip is
I need diagnostics guidance to determine whether a no start condition is the low pressure or the high pressure pump?
It should have a check engine light code.
@@dannyjohnsonsgarage all I found was a P12a8-00. Which is fuel pump related but it doesn't specifically point to which pump.
How do you know if its going bad if vehicle is not throwing any codes.
Apparently if it leaks on the seal you can get fuel in the oil (hurts lubricating). The oil can smell like fuel. Mine was not bad, it was part of a larger repair that I did since I had 96,000 miles on it and removed it so put a new one on
ruclips.net/video/cWayyZGNYRI/видео.htmlsi=tMYkIfr4zNXzKvpT
Why you change the high pressure pump
Part of the new lifters install. It was operating fine but can leak fuel into the engine and the oil won’t lubricate properly
ruclips.net/video/cWayyZGNYRI/видео.htmlsi=3rF-dmstzaW4lolK
What was the symptoms with the old pump?
I replaced mine while doing new lifters, but other have had codes for too much fuel if a seal leaks
Does the new fuel lines require any Sealant ?
It would probably be a good idea. I haven’t had leaks and it’s a ball fitting, but I’d say it’s a good idea as long as you don’t get sealant in the line
@@dannyjohnsonsgarage Appreciate the response thanks
Seems like you replaced more parts on that POS then you have on all your mustangs combined lol
Yep