How To Install Scytek A15 Alarm System With Keyless Entry 2003 Honda Civic
HTML-код
- Опубликовано: 17 дек 2020
- Installing a full Scytek alarm system with keyless entry on a 2003 Honda Civic..
#HondaCivic #HowToInstall #scytekA15Alarm 
Авто/Мото
Авто/Мото
Thx for taking the time to make this video, you the man.👏
Hey you're welcome, and thanks i appreciate that!
Awesome content man.
Appreciate it!
Does the central door lock system work with negative or positive in this car?
Hey thanks for the vid man! Quick question, what kind of diode size do I need and is it a rectifier or switching diode? You mentioned 1A but just want to know if either or! Thanks in advance!
1 amp diode would be fine...
Good video...you explained and showed with detail. I have scytek g27 alarm i need to install with scytek GPS module, does the GPS module just plug into the alarm brain box and do i also need to run separate 12 volt to the GPS module?
Hey not sure I usually don't do the gps modules...
Hello! I have the Scytek G5.2W which is supposed to have the same programming procedure as other Scytek systems. I can’t get my system to enter programming mode. Are you supposed to turn on the ignition then hit the valet switch five times?
Turn the ignition switch to the ON position, Within 5 seconds, press the valet switch 5 times, the siren/horn will chirps/honks 3 times. If that don't work check your ignition wire, and make sure it's getting ignition when you turn the key. Is the siren or horn that you hooked up working?
@@Change4ADollar Everything is hooked up just right. I’m getting power to all three positive wires, the ignition wire is getting power and sending it (lights will turn off if I turn the key to the ON position). I’m going to double check all of my connections tomorrow.
Hey great video.
I have a older version of a Scytec system. There is 2 wires for door unlock and lock (-). My car has a lock actuator on the driver door only, which is fine. I'm still confused on how I can hook it up. I took off my doors panel and saw which color wires. Should I just tap into these wires? Or is there more I need to know?
Did your car originally come with power locks? Or did someone put a aftermarket actuator just on the driver's door?
@@Change4ADollar
Thanks for the reply.
It came with it. But there was no way to use it. They actuate when the car gets put in park (unlock) and when the car is driving for a short period of time (lock).
From your videos, it sound like if they are negative actuators then I can just jump the wire to ground to actuate. Should I just try it? Then T tap the respective wire to the Scytek? I'm thinking if they are positive actuator then nothing will happen if I jump to ground, at that point I'll pay for someone to do it.
@@estebanescamilla_ what year?
@@Change4ADollar 2017
@@Change4ADollar 2017
Hi, i’m about to install an alarm on my 04 civic. what diode do i need for door trigger?
1 amp diode.
Did you ever get this installed? What diodes did you use I bought a pack and there all sorts of them on Amazon. And spliced them with the - on trigger wires and nothing happens when opening the door when alarm armed. Same year 2004 civic. I think I used 4001 1 amp diodes wondering if I need different ones or something
@@cdickey16
i did. bought this ones FAIRCHILD SEMICONDUCTOR 1N4001 DIODE, STANDARD, 1A, 50V, DO-41. had to use 3 of them , think.
If I just want the door and trunk unlock feature, what wires would I use?
You have to look in the manual to get the color or are you talking about the wires on the vehicle itself?
Thank you. But if I can't turn it back. How or what can I check next?
I'm sure you will be able too...
Good video question I installed the A15 scytek question is I connected the grey trunk wire to my yukon where my old alarm was connected to the wire, and when I hold the trunk release button on fob it doesn't pop the hatch like the old alarm did now is the polarity backwards or does the trunk pop need to be programmed to work
What year is the Yukon?
@@Change4ADollar 1995 2 door yukon
@@Change4ADollar everything else works fine but trunk pop button on fob won't pop the back hatch but the grey wire is tied into hatch wire as my old clifford alarm was but just don't pop hatch when pressed or held down. Thanks in advance 🙂
@@castillian1 you need a relay the wire off the alarm box sends out a - negative pulse, and the wire from the Yukon trunk release is a + positive
@@Change4ADollar okay I see my old alarm did it off the box so thats why it's I was confused. Thank you brother
What's the loudest alarm i can get i want one that's really loud so that i can hear who's messing with my car.
Watch my video called "Installing a super loud siren on my truck", and that will give you what your looking for....
I have an 08 pathfinder. I'm trying to wire in my remote starter. My car has negative door locks. The door lock switch has a one wire communication line that goes to the bcm and the bcm reverses polarity. Can I wire in a 5 wire relay straight to the driver door lock actuator to reverse polarity. And will it affect the operation of the bcm?
The door locks on your 08 pathfinder Power lock: - LT. BLUE Power Unlock - RED/WHITE Requires Double Pulse you can find those 2 wires at the power window main switch.
Hey bro the trunk wire is negtive all the time , Is supposed to be like that or supposed to be grounded only when I hit the button to open it??
When I press the button to open the trunk nothing happens
Do you have power trunk release?
@@Change4ADollar yes
You ever insatall alarm on a dodge neon
Yes
I need to do on my neon do have videon for it
@@javiercruz333 don't have a video on that one.
Well i need it help with that