Well, then. I am most disappointed. I stumbled onto this video, followed his advice, and went looking for future episodes. I had subscribed, and then saw there's been no additional content for 6 months. Great editing, great audio, pleasant English voice, and well structured chapters. I'm going to stay subscribed, and hope to be notified of future content. You're sorely missed, my man!
@@BillWilliamson420 if you do it properly on a pc that alrdy has windows and is set up, yes (since it only changes the motherboard system). If it's a new build, no, you would need an usb with a windows boot ready
I know this is an older video but a bit of advice. The overclock profile from these companies often runs with some very high voltages. I would HIGHLY recommend doing some stress testing while monitoring the temps to make certain your temps are reasonable. High temps can lead to your cpu thermal throttling; leading to worse performance and shorter lifespan.
A constant 1.4 v on a "Regular use" CPU is Insane... I was able to Run my Ryzen 7 2700x to 4.3ghz constant Rock steady, no crashes with a 1.375v and every time I tried the CPU Boost the V numbers where all over the place along with Temperatures. From 1.425 v to Red numbers on HW Monitor. You are 100% right there.
@@alexzero3736 Throttling occurs when temperatures get too high. The motherboard detects this and lowers the clock/voltages to protect the cpu. Still occurs on all modern day systems.
@@DanicolasolGamingTVuruguay I get some crazy temps with the cpu boost especially when running prime95. Good thing some of us pay attention to this cause some users would just take this videos advice without hesitation. Sadly I didn’t hit the lottery on my i7-9700k any reasonable voltage quickly led to instability…
can't say the same for myself, but this is likely possible due to my anxiety of this stupid little situation messing with me right now. i probably need a new some kind of fan, but i thought that maybe it could be fixed by messing with with my BIOS and adjusting my fans speed. because my damn PC will restart when i play any demanding game, i think it's over heating, because i can make my room really cold and it will run just fine, but if it gets warmer the damn thing reboots while i play and that gets super annoying.
@@breakingandbuyingbikes i think i have to get some new ones, one of them squeaks sometimes, i have cleaned it, but it still happens every once in a while. lately it hasn't been having the overheating issue, i guess it's because it's the colder time of the year where it never reaches the point where it's too hot and restarts. it was doing this about a month ago, but now it works fine. but i guess i could get more fans, i have wanted to install something experiential like a vacuume that sucks the hot air out of the tower before it has time to settle, maybe it's a stupid idea lol.
@@5226-p1e Run Stock don't over clock. Find stability first, once established you can just enjoy the games. Or if you like to tinker get the right tools to check temps, voltages and stress testing.
@@Physics072 yeah i found out my issue was the power supply was dying, it was old but i also wasn't as good at cleaning when i should. recently i purchased one of those rechargeable air compressor things so i can properly clean my PC, because the cans never lasted long enough and so i didn't clean as often as i should, now i can clean it any time and not run into that issue so the hardware will last longer.
@@mr.niceguy2337 ikr!! like sir i went to you coz idk how to do anything and they weren’t keen on downloading windows for me and explained how to do it myself but like …. you could of done it and just charged me extra ….
My MSI Tomahawk B450 motherboard has a "Game Mode" setting for CPU Boost. Turning that on gave a 600 MGZ boost and resulted in the after-market CPU fan going nuts. Sounded like a 747 firing up for takeoff. Went back to the "off" setting pretty quick.
Everyone has their own liking for setting up fan curves, but what I did was set the CPU fan curve and one fan port curve to match. Then used a 4 pin PWM fan controller that I hook up all my fans then hook the controller up to that one fan port on the board. As the CPU fan rises so does all the other fans to match. I know some claim negative air flow is best, but for me I'd rather have zero air flow restriction as much as possible... but that's just my opinion.
The reason to have fans separate is to be able to set a neutral pressure in the case. A little positive pressure is best, but a negative pressure bad. And a neutral pressure is what you should be going for.
3:28 I dont have Lanes Source .. I am on b660 tomahawk wifi motherboard and 12100 cpu. Tried to install 990 pro nvme today. But I dont have the Lanes Source option to make it communicate straight with the cpu. However put the 990 pro on the first pci slot next to the cpu and installed windows 10 on it. But I dont know if it communicated straight with the cpu if not I am losing its speed.
OMG THANK YOU i have a rtx 4090 and later on i needed my bios to be updated and i couldn’t understand it and i turned it in to a computer shop and ever since i got it back apex was blue screening my pc and this fixed it thank you!!!!!! You just earned a sub
@@TheGrayingTech hi i found this online it said Katana 17 B12V this version is compatible with 12th/13th Gen Intel® Core Mobile Processors: H Series, P Series, U Series. does that mean msi bios download works with 12th gen u series laptop and what happens if get the wrong one mother board bios reply asap would really appreciate it thanks
@@TheGrayingTech hi i dont use an msi bios but i want to change to msi bios i believe mine is compatible with Katana 17 B12VFK and if something goes wrong would i be able to reset it and does msi bios have cpu overclocking my laptop is hp core i7 1225u with 32gb ram upgrade also is flash drive with 32 gb enough for it to work and do i need to plug in or not for the update
@@TheGrayingTech hi i dont use an msi bios but i want to change to msi bios i believe mine is compatible with Katana 17 B12VFK and if something goes wrong would i be able to reset it and does msi bios have cpu overclocking my laptop is hp core i7 1225u with 32gb ram upgrade also is flash drive with 32 gb enough for it to work and do i need to plug in or not for the update please reply me asap would mean a lot to me thanks
@@TheGrayingTech hi i believe my msi bios is Katana 17 B12V is compatible with hp core i7 1255u if something goes wrong can i reset it and it has cpu overclocking feature right with 32gb ram upgrade also is flash drive with 32 gb enough for it to work and do i need to plug in or not for the update please reply me asap would mean a lot to me
My msi b450 max setup my 3.6ghz cpu to 4.4 ghz by default and in the OC option i set the ram to its speed. The problem is the cpu ran fine but in games was jerky until i changed the cpu to 3.6 ghz and let turbo do all the overclocking. I don't use xmp and my ram run at 3200mhz what it's rated for. It also reports 3200mhz in task manager. So no, you dont need xmp at least on my mobo. The systen is now stable and doesn't overheat. For some reason mobo manufacturers set your cpu to run at their highest speeds and burn out your system.
I have a msi b650-p wifi and i cant get any sounds from the 3.5mm audio jack to my 2.1 speaker system i tried msi's own drivers and realteks drivers but nothing works :/
My bios is not showing the CPU selection option after I go into the PCIE section from advanced. It shows the list of m.2slots from where I can select the gen for each. Can someone help me with this?
I run i9 13900k and when activating that default MSI CPU OC my game freeze (sometimes the whole OS) with warzone 1 and 2. Previously i had i9 9900k with an older MSI motherboards and i also had exactly the same issue making that OC fonctionnality unusable in my case. It is also AIO cooled (previously 240mm Corsair and now 360mm NZXT)
Why would some of those options to click on in the advanced setting not be available? Both mine and your bios is the same. For instance in Power management setup I don't have the usb standby power option to click on.
Dont forget that you need to run your FCLK at half your memory bandwidth example (3733Mhz 1867 FCLK) if you're using a ryzen CPU. Undervolting is typically fine it's when you start overvolting then it gets dangerous. Also overclocking memory and messing with timings can cause corruption.. I've had to run a few sfc/scannow and DSIM restore a few times because of instability crashes lol
@Sunkeny okay, but that’s only on ryzen.. this was specifically an intel chip. Why would you bother to put this info here when it doesn’t apply at all?
Im always trying to get your bios because on my x470 gaming pro carbon i just have the regular click bios that looks no way near yours mine is just called msi click bios and i recall having access to the one shown on your tutorial and dunno if my version is the latest or not im lost tbh.
If you have overheating issues, you can trey tuning power options in windows for the cpu usage. Also would suggest to clean and reapply the thermal paste. For some reason i always lower it down to 98%, giving it some room, since i mainly play older games.
HELLO MAZZ! I commented on The Grayes Video looking for advise but he never replied!!! So am posting the same question to you Sir! You are my go to guy for MSI! I recently built my last system with an MSI Z390-A Pro with an Intel Pentium Gold Coffee Lake G5400 Duel Core 3.7Ghz Processor! 64 GB DDR4 3200 Ram and a GeForce GTX 1650 Video Card! I use this system for Adobe Video Editing! Besides ticking the XMP & GAME BOOST button with FAN set to Auto, what else can I do to Overclock this system? I was told by MSI that This is basically a budget gaming board that cannot be manually overclocked? Any advise Would be greatly appreciated!
@@cactusstudiossouth I personally avoid the OC stuff, i try to buy the powers i need by default. Except the XMP profile, my MSI board has CPU boost button for the cpu, but i am on Ryzen platform. I dont recall any issues with MSI products, it seems to be that haters have big mouth. When you decide to upgrade your system you would only need new motherboard and cpu, if you stick with Intel you can nowdays have smooth Windows 10 experience with 9000 series if you have DX12 games in mind, since you are using 1650 that will serve you a while... One thing you can check that your PCIE is set properly, i think 1650 is 3.0 ?
Hi, I got an alert saying "CPU overheating alert! Please check CPU cooler is firmly attached for working properly." I haven't even get to windows yet, it was on bios. But my CPU fan is installed properly, I already tried reinstall it before without reapply the thermal. Can you help me out? AMD Ryzen 5600 on MSI B550M
@@Yapan22 Have you done any Overclocking or is set to default speeds ? What kind of case you have, small medium or big one ? What thermal paste used ? Did you apply it properly ? It is summer time in North, therefore your computer goes hotter also. How is it placed in the room ? MY SPECS; Phanteks Enthoo Pro White. DeepCool RGB casefans 4x. DeepCool GAMMAXX L120 V2 (MATCH with case fans). Corsair XTM50 High Performance Thermal Paste Kit. AMD Ryzen 5 5600, AM4, 3.5 GHz, 6-Core, Boxed MSI X570-A PRO (Flashed BIOS). MSI GeForce RTX 3050 GAMING X, 8GB GDDR6. Western Digital 2TB SN570 NVME SSD 3500, i have multiple WD HDD for videos. Corsair 32GB (2x16GB) Vengeance LPX, DDR4 2666MHz, 1.2V, C (I dont do OC, i went with the quantity instead). Corsair 1200W HX1200i (For future upgrades i took a big one). Creative SoundBlaster Audigy Rx (Music creation). Asus BD (Yes, i still have big movie collection).
hello, friend, I have this same motherboard along with an i5 12600k, and 16g ram Kingston3200. updated bios. but the game boost and per core options in the bios are disabled. can you help me please. thanks
I have a build of Msi B450m mortar max and ryzen 5 5600g. I dont have a gpu. And, i want to use dual monitor with my apu. I have checked i cannot find igd multi monitor output option in my bios. My on board HDMI is working properly and i used an display port to Hdmi convater for the 2nd monitor but its not working. I have checked Convater is working properly but not getting any output from my displayport. Can anyone help.
Hi Comunity, i need some help with this: I cant reach CPU features, H510M-A PRO. When i inside of BIOS click 5 i cant modify the VRAM of the integrated graphics intel HD 630... Someone knonws why?
I have a question. So instead game boast, mine said creator genie. My XMP profile 1 is on but my CPU isn’t. Why is that? I tried to unplug and replugged
You said “everything’s fine aslong as you don’t change voltage” im so lost on what you mean there, what settings change the voltage so I know not to change them. Does changing the CPU Game Boost to on and your CPU cooler tuner to water cooling (if you have one) does that effect Voltage?
Help! I turned on CPU window below GAME BOOST, enabled "USB STDBY POWER @ S4/S5 and enabled "RESUME BY USB POWER"...saved and exit. I got a blue screen, it says: Your device ran into a problem and needs restart. We are collecting error info and then we will restart". Stop code: Clock_Watchdog_ Timeout. Any ideas how to fix this? Thanks
I tired to find the M.2 lance source but i cant find it in the tab where you had it, i got msi click bios 5 and i9 11900k, is this not possible to set the lane source for this cpu and a mpg z590 MB ?
Same question. I have been trying to figure out why I cannot access XMP Profile 2. As like the video screen, it is blacked out. Does anybody know how to make it come "alive?" No amount of Googling or ChatGPT'ng has come to a resolution.
After running game boost mode in BIOS, I get computer A2 error. The computer does not turn on. When I restart the computer, it says A2 on the motherboard, and when I turn it off and on again, the computer turns on. My motherboard is z790 carbon wifi. What do you think is the reason why I get the A2 error every time I turn on the computer for the first time? Thank you.
my 760 TOMOHAWK wifi mb is new and my 13600kf also new I have updated bios but it doesn't let me use the cpu game boost speed so I can't overcloack my cpu
Can someone help here? So i bought 2 MSI Z590 motherboards. Do i really need to connect a plug to the 6 pin PCIe connector at the bottom of the motherboard??
Ok I have specs of Ryzen 7 3600x, Rtx 3060 ti and 32 GB corsair 3600Mhz I have enabled XMP and I was thinking should I enable Re-size bar support? Will it give me any benefits with my current specs or should I live it as it is?
@@coolitd Ok Thanks you! well I already enabled it asked ChatGPT about it and only older games won't be benefited from the Re-size! So I enabled, as its good to have it enabled!
Hello l'ami, je suis un bleu en informatique, j'ai une carte mere asrock, j'avais 2 disque de 500Go en RAID, je l'ai fais supprimer et depuis mes disques ne montent pas, je les vois dans gestionnaire de peripheriques, je les vois dans diskpart/list disk mais je ne les vois pas comme le disque C dans une fenetre; quand je clique sur gestion de l'ordinateur ou gestion du disque ca tourne puis rien aucune fenetre ne s'affiche. Comment regler cela dans le bios ? Aussi dans le bios quand je mets en AHCI, il relance le pc et systematiquement ecran bleu, du coup j'ai mis en EDI mais bon ca mouline pas comme je veux car je voudrais utiliser mes HDD de 500Go chacun. Tu peux m'aider svp ?
how can i switch from UEFI to Legacy mode in ma Bios, i need to load linux via external usb, but when i try to do it instead, it always returns me to UEFI mode.
I can't, for the life of me, figure out what is going on with my RAM. I have an MSI board. I enable XMP (the RAM is rated at 3200Mhz), and no matter what the system will not POST until I clear CMOS.
@@christopheralvarez1090 I did, actually. To run 4 sticks I had to buy 4 at the same time. Reading other's issues sometimes, even the exact same brand of RAM just doesn't work together if bought separately. I guess the actual modules differ enough if they have different manufacturers.
@@ronlouthain913 sound about right glad it worked ! I’m dealing with two Corsair vengeance sticks that can go up to 6000 MHz, but only can go up to 56 before they start to not post. XMP doesn’t work at all but MSI Memory Try it ! Feature was the only thing that got it to 5600 originally running 4800 MHz
My cpu is idle at 70degrees and going beyond 110degrees under stress Tried all sorts of coolers and bios reset, what could be the issue ?? Note : At my bios homescreen, the CPU Core Voltage appears as 1.434 volts (no oc, no custom settings)
See JayzTwoCents video '" Motherboard Default settings could be COOKING your CPU! "I had to enable the Box Cooler setting and had to under-volt my CPU. I run a negative (-) Offset at 0.020 on a MSI z690 board.
I just had replaced a failing asus rog strix b450f-gaming with a msi pro b550-vc wifi board which is supporting a 5700g, 16gb ram auto running at 2666mhz, and a msi mech 6750xt gpu. only thing i have done with the bios that came with the board was turn off the igpu (was noticing some stuttering in destiny) and enable resize bar... not touching overclocking.
hi everyone I have a problem with the MSI GE62 6QC APACHE laptop, the CPU speed drops when opening the game and normal when not opening the game, please help me.
![Blox Fruits Dragon Rework Update [Full Stream]](http://i.ytimg.com/vi/EqDAp8udhm0/mqdefault.jpg)
![You NEED to Change these 6 BIOS Settings now! 👉 [Lasts Longer, Faster, + Quieter]](/img/1.gif)
Well, then. I am most disappointed. I stumbled onto this video, followed his advice, and went looking for future episodes. I had subscribed, and then saw there's been no additional content for 6 months. Great editing, great audio, pleasant English voice, and well structured chapters. I'm going to stay subscribed, and hope to be notified of future content. You're sorely missed, my man!
he's dead
@@ChancellorM1YT how do you know
@@oggoth8923 due to corona i think
@@tehf00n people are so weird
Was thinking the same thing. Still gonna subscribe
2 years later and still helps, thank you man!!
@@BillWilliamson420 if you do it properly on a pc that alrdy has windows and is set up, yes (since it only changes the motherboard system). If it's a new build, no, you would need an usb with a windows boot ready
@@BillWilliamson420 LOL
Just got a new pc. Harddrive has windows installed already. Monitor wont turn on and everything is plugged in@@knaki2521
Built a new pc
Very clear and informative, I would watch your BIOS OC guides over manufacturers videos any time
I know this is an older video but a bit of advice. The overclock profile from these companies often runs with some very high voltages. I would HIGHLY recommend doing some stress testing while monitoring the temps to make certain your temps are reasonable. High temps can lead to your cpu thermal throttling; leading to worse performance and shorter lifespan.
Actually, modern motherboard wont allow this. System wont start if throttling is detected.
A constant 1.4 v on a "Regular use" CPU is Insane... I was able to Run my Ryzen 7 2700x to 4.3ghz constant Rock steady, no crashes with a 1.375v and every time I tried the CPU Boost the V numbers where all over the place along with Temperatures. From 1.425 v to Red numbers on HW Monitor.
You are 100% right there.
My asus on extreme tuning was soo loud doing nothing in windows
@@alexzero3736 Throttling occurs when temperatures get too high. The motherboard detects this and lowers the clock/voltages to protect the cpu. Still occurs on all modern day systems.
@@DanicolasolGamingTVuruguay I get some crazy temps with the cpu boost especially when running prime95. Good thing some of us pay attention to this cause some users would just take this videos advice without hesitation. Sadly I didn’t hit the lottery on my i7-9700k any reasonable voltage quickly led to instability…
Great video and explanation without ever being boring or too complicated. Great audio aswell. Thanks :)
can't say the same for myself, but this is likely possible due to my anxiety of this stupid little situation messing with me right now.
i probably need a new some kind of fan, but i thought that maybe it could be fixed by messing with with my BIOS and adjusting my fans speed.
because my damn PC will restart when i play any demanding game, i think it's over heating, because i can make my room really cold and it will run just fine, but if it gets warmer the damn thing reboots while i play and that gets super annoying.
@@5226-p1e add more fans
@@breakingandbuyingbikes
i think i have to get some new ones, one of them squeaks sometimes, i have cleaned it, but it still happens every once in a while.
lately it hasn't been having the overheating issue, i guess it's because it's the colder time of the year where it never reaches the point where it's too hot and restarts.
it was doing this about a month ago, but now it works fine.
but i guess i could get more fans, i have wanted to install something experiential like a vacuume that sucks the hot air out of the tower before it has time to settle, maybe it's a stupid idea lol.
@@5226-p1e Run Stock don't over clock. Find stability first, once established you can just enjoy the games. Or if you like to tinker get the right tools to check temps, voltages and stress testing.
@@Physics072
yeah i found out my issue was the power supply was dying, it was old but i also wasn't as good at cleaning when i should.
recently i purchased one of those rechargeable air compressor things so i can properly clean my PC, because the cans never lasted long enough and so i didn't clean as often as i should, now i can clean it any time and not run into that issue so the hardware will last longer.
Beautiful guide! Well explained, I'll also share it on my channel for my motherboard 🤩
nobody asked
ty so much for this, got my PC back from the shop after upgrading and had a heart attack at this menu coz i had no idea what to do 🤣
They should’ve set this up for you? Or at least downloaded windows and the software for ur components of your computer kinda did u wrong 😂
@@MainYotubeacct nope, i had to scramble and get windows to download 🤬
EDIT- i literally paid them $150 labour fee too :(
@@Utachan101 wtf 😳 what kind of a shop is this
@@mr.niceguy2337 ikr!! like sir i went to you coz idk how to do anything
and they weren’t keen on downloading windows for me and explained how to do it myself but like …. you could of done it and just charged me extra ….
My MSI Tomahawk B450 motherboard has a "Game Mode" setting for CPU Boost. Turning that on gave a 600 MGZ boost and resulted in the after-market CPU fan going nuts. Sounded like a 747 firing up for takeoff. Went back to the "off" setting pretty quick.
I had a 19 watt gh19 installed DIRECTLY to the back of my rh14 in spite of the contrary. No wonder it wasn't working LOL
🤣🤣🤣
Great video, answered my question in 30 seconds, stayed around to learn some more.
bro for real, strangers from all around the globe are waiting for your contents, pls come back we need to learn !!
Everyone has their own liking for setting up fan curves, but what I did was set the CPU fan curve and one fan port curve to match. Then used a 4 pin PWM fan controller that I hook up all my fans then hook the controller up to that one fan port on the board. As the CPU fan rises so does all the other fans to match. I know some claim negative air flow is best, but for me I'd rather have zero air flow restriction as much as possible... but that's just my opinion.
doesnt it make airplane noise?
@@alexzero3736 oh no, it's not that loud. At full speed, it's comparable to small room fan on low... approximately.
ok boomer
The reason to have fans separate is to be able to set a neutral pressure in the case. A little positive pressure is best, but a negative pressure bad. And a neutral pressure is what you should be going for.
A neutral pressure also keeps the system cleaner.
bruh im missing most of ur settings
Same got a Z790 msi mobo with an i9
@@MillennialGeo mine is a msi mag b650 tomahawk with 7800x3d
💯💯💯
Update your bios to the latest version 🤯
@@trevorbarney1796 already did 🤡
Computer nerd and motorcycle enthusiast... I can relate! Thanks for the video.
Awesome video, it starts right away and don't have to sit through some cringy intro. Thanks!!
I'm so happy you are using the same motherboard as me. Thanks for help!
my msi b450 gaming plus max motherboard has an option for game boost which i turned on and now my pc won’t even start up
Just stumbled upon this video but holy amazing video. 🤘🏼🤘🏼
3:28 I dont have Lanes Source .. I am on b660 tomahawk wifi motherboard and 12100 cpu. Tried to install 990 pro nvme today. But I dont have the Lanes Source option to make it communicate straight with the cpu. However put the 990 pro on the first pci slot next to the cpu and installed windows 10 on it. But I dont know if it communicated straight with the cpu if not I am losing its speed.
Pcie gen 4 should be supported by the top m.2 slot on pretty much all LGA1700 boards. You don't have to worry about that on your platform.
OMG THANK YOU i have a rtx 4090 and later on i needed my bios to be updated and i couldn’t understand it and i turned it in to a computer shop and ever since i got it back apex was blue screening my pc and this fixed it thank you!!!!!! You just earned a sub
Thnx for the helpful tips. Keep up the grind and keep up the great work.
Appreciate it!
@@TheGrayingTech hi i found this online it said Katana 17 B12V this version is compatible with 12th/13th Gen Intel® Core Mobile Processors: H Series, P Series, U Series. does that mean msi bios download works with 12th gen u series laptop and what happens if get the wrong one mother board bios reply asap would really appreciate it thanks
@@TheGrayingTech hi i dont use an msi bios but i want to change to msi bios i believe mine is compatible with Katana 17 B12VFK and if something goes wrong would i be able to reset it and does msi bios have cpu overclocking my laptop is hp core i7 1225u with 32gb ram upgrade also is flash drive
with 32 gb enough for it to work and do i need to plug in or not for the update
@@TheGrayingTech hi i dont use an msi bios but i want to change to msi bios i believe mine is compatible with Katana 17 B12VFK and if something goes wrong would i be able to reset it and does msi bios have cpu overclocking my laptop is hp core i7 1225u with 32gb ram upgrade also is flash drive with 32 gb enough for it to work and do i need to plug in or not for the update please reply me asap would mean a lot to me thanks
@@TheGrayingTech hi i believe my msi bios is Katana 17 B12V is compatible with hp core i7 1255u if something goes wrong can i reset it and it has cpu overclocking feature right with 32gb ram upgrade also is flash drive with 32 gb enough for it to work and do i need to plug in or not for the update please reply me asap would mean a lot to me
Where do I get Click Bios software
f12/del
I don't have pcle lanes under settings/advanced/pcle subsystem settings
In my one it has some sub-sub settings.
Computers and Motorcycles? Deserved a Sub on both channels!
Wow I'm very glad I came across your channel. Thank you for this vid. 👍 !!!
i close my bios, and then i got blackscreen. how to get back to bios setting?? plz help me :(
I don't know what to click to leave the Bio thing im literally keep exiting but it keeps putting me back in bio and im tryna leave
My msi b450 max setup my 3.6ghz cpu to 4.4 ghz by default and in the OC option i set the ram to its speed. The problem is the cpu ran fine but in games was jerky until i changed the cpu to 3.6 ghz and let turbo do all the overclocking. I don't use xmp and my ram run at 3200mhz what it's rated for. It also reports 3200mhz in task manager. So no, you dont need xmp at least on my mobo. The systen is now stable and doesn't overheat. For some reason mobo manufacturers set your cpu to run at their highest speeds and burn out your system.
just wanna know how can u screen record the bios?
Capture card.
How come i didnt have the option to for running more then 1 monitor i have the same cpu and a z590 tomahawk
4:16 i cant find Integrated Graphics Configuration.
What is necessary to have this option there?
Thank you tech!
Mines a little different. What do I do? Mine has auto and gen1-gen5 options. But no cpu option
Huh, I do have a amd 5 3600 and at the xmp profile it shows DDr4 3000MHZ how do I fix that?
M.2_1 PCIe lanes source option ain't showing in my BIOS. I am using MSI B450M Pro M2 Max Motherboard.
Me too and the m2 is not listen anywhere do you know what I can do?
I have a liquid cooler by MSI but the bios doesn’t have the Fan Cooler option
I have a msi b650-p wifi and i cant get any sounds from the 3.5mm audio jack to my 2.1 speaker system i tried msi's own drivers and realteks drivers but nothing works :/
Underrated channel
NGL those added graphics are cool.
Thank you bro, very informative.
My bios is not showing the CPU selection option after I go into the PCIE section from advanced. It shows the list of m.2slots from where I can select the gen for each. Can someone help me with this?
Not even my motherboard but explained everything so well it helped me figure out what happened to my settings after resetting my pc, thanks 🙏 🥴🫠
I dont have half of these setting options
Me too cause I got a Ryzen.
Yeah this was 3 years ago
I run i9 13900k and when activating that default MSI CPU OC my game freeze (sometimes the whole OS) with warzone 1 and 2. Previously i had i9 9900k with an older MSI motherboards and i also had exactly the same issue making that OC fonctionnality unusable in my case. It is also AIO cooled (previously 240mm Corsair and now 360mm NZXT)
Me2
Maybe me also. Just firing it up.
Me tooooo I’ve been dealing with this problem forever my pc eventually crashes within 20 min
Why would some of those options to click on in the advanced setting not be available? Both mine and your bios is the same. For instance in Power management setup I don't have the usb standby power option to click on.
you have a newer version
Awsome work!
Dont forget that you need to run your FCLK at half your memory bandwidth example (3733Mhz 1867 FCLK) if you're using a ryzen CPU. Undervolting is typically fine it's when you start overvolting then it gets dangerous. Also overclocking memory and messing with timings can cause corruption.. I've had to run a few sfc/scannow and DSIM restore a few times because of instability crashes lol
Ok im not a tech guy but who the fuck makes their memory run at half the performence?
@Sunkeny okay, but that’s only on ryzen.. this was specifically an intel chip. Why would you bother to put this info here when it doesn’t apply at all?
I have a Ryzen chip and I thought it was helpful
@@Kben01 To advise someone who has a Ryzen CPU probably.
@@Kben01 he literally says if you have a ryzen cpu
Im always trying to get your bios because on my x470 gaming pro carbon i just have the regular click bios that looks no way near yours mine is just called msi click bios and i recall having access to the one shown on your tutorial and dunno if my version is the latest or not im lost tbh.
Try EZ mode top right
If you have overheating issues, you can trey tuning power options in windows for the cpu usage. Also would suggest to clean and reapply the thermal paste.
For some reason i always lower it down to 98%, giving it some room, since i mainly play older games.
HELLO MAZZ! I commented on The Grayes Video looking for advise but he never replied!!! So am posting the same question to you Sir! You are my go to guy for MSI! I recently built my last system with an MSI Z390-A Pro with an Intel Pentium Gold Coffee Lake G5400 Duel Core 3.7Ghz Processor! 64 GB DDR4 3200 Ram and a GeForce GTX 1650 Video Card! I use this system for Adobe Video Editing! Besides ticking the XMP & GAME BOOST button with FAN set to Auto, what else can I do to Overclock this system? I was told by MSI that This is basically a budget gaming board that cannot be manually overclocked? Any advise Would be greatly appreciated!
@@cactusstudiossouth I personally avoid the OC stuff, i try to buy the powers i need by default. Except the XMP profile, my MSI board has CPU boost button for the cpu, but i am on Ryzen platform. I dont recall any issues with MSI products, it seems to be that haters have big mouth.
When you decide to upgrade your system you would only need new motherboard and cpu, if you stick with Intel you can nowdays have smooth Windows 10 experience with 9000 series if you have DX12 games in mind, since you are using 1650 that will serve you a while...
One thing you can check that your PCIE is set properly, i think 1650 is 3.0 ?
@@cactusstudiossouth What games in mind ?
That cpu is just weird combo with the rest.
Hi, I got an alert saying "CPU overheating alert! Please check CPU cooler is firmly attached for working properly." I haven't even get to windows yet, it was on bios.
But my CPU fan is installed properly, I already tried reinstall it before without reapply the thermal.
Can you help me out?
AMD Ryzen 5600 on MSI B550M
@@Yapan22
Have you done any Overclocking or is set to default speeds ?
What kind of case you have, small medium or big one ?
What thermal paste used ?
Did you apply it properly ?
It is summer time in North, therefore your computer goes hotter also.
How is it placed in the room ?
MY SPECS;
Phanteks Enthoo Pro White.
DeepCool RGB casefans 4x.
DeepCool GAMMAXX L120 V2 (MATCH with case fans).
Corsair XTM50 High Performance Thermal Paste Kit.
AMD Ryzen 5 5600, AM4, 3.5 GHz, 6-Core, Boxed
MSI X570-A PRO (Flashed BIOS).
MSI GeForce RTX 3050 GAMING X, 8GB GDDR6.
Western Digital 2TB SN570 NVME SSD 3500, i have multiple WD HDD for videos.
Corsair 32GB (2x16GB) Vengeance LPX, DDR4 2666MHz, 1.2V, C (I dont do OC, i went with the quantity instead).
Corsair 1200W HX1200i (For future upgrades i took a big one).
Creative SoundBlaster Audigy Rx (Music creation).
Asus BD (Yes, i still have big movie collection).
My M.2 has the OS on it, should I still enable the CPU lane?
I assume yes, as most install the OS on a M.2 that’s in the first pcie
I cant find igd multi monitor option.
I have msi b450m mortar max
hello, friend, I have this same motherboard along with an i5 12600k, and 16g ram Kingston3200. updated bios. but the game boost and per core options in the bios are disabled. can you help me please. thanks
I have a build of Msi B450m mortar max and ryzen 5 5600g.
I dont have a gpu. And, i want to use dual monitor with my apu.
I have checked i cannot find igd multi monitor output option in my bios.
My on board HDMI is working properly and i used an display port to Hdmi convater for the 2nd monitor but its not working. I have checked Convater is working properly but not getting any output from my displayport.
Can anyone help.
Great video, new sub
Hi Comunity, i need some help with this:
I cant reach CPU features, H510M-A PRO. When i inside of BIOS click 5 i cant modify the VRAM of the integrated graphics intel HD 630... Someone knonws why?
I did enable resume by usb devices and when i restarted my pc my usb devices didnt work so i couldnt get into my pc help me pls!!!!
I have 32 gigs of ram and im only getting 2200 i cnt find my ram options in bios please help
My b550 tomahawk has some different options. Cant seem to find multi monitor settings
my motherboard msi mpg z590 gaming force. how can i close game boost on cpu ?
I have a question. So instead game boast, mine said creator genie. My XMP profile 1 is on but my CPU isn’t. Why is that? I tried to unplug and replugged
You said “everything’s fine aslong as you don’t change voltage” im so lost on what you mean there, what settings change the voltage so I know not to change them. Does changing the CPU Game Boost to on and your CPU cooler tuner to water cooling (if you have one) does that effect Voltage?
Mine always goes to a black screen and it says overclock failed with an i9 10850k and 3600mhz but i can't get to 3600mhz
I cant click in unser Game boost on CPU only xmp Profile 1 and 2. Do i have to enable anything to unlock this?
Help! I turned on CPU window below GAME BOOST, enabled "USB STDBY POWER @ S4/S5 and enabled "RESUME BY USB POWER"...saved and exit. I got a blue screen, it says: Your device ran into a problem and needs restart. We are collecting error info and then we will restart". Stop code: Clock_Watchdog_
Timeout. Any ideas how to fix this? Thanks
I definitely need to update my bios. Half of the settings you mentioned I don’t have and it’s the same motherboard.
I tired to find the M.2 lance source but i cant find it in the tab where you had it, i got msi click bios 5 and i9 11900k, is this not possible to set the lane source for this cpu and a mpg z590 MB ?
I have an MSI board as well, I noticed yours also has Profile 2 grayed out. Why is that?
Same question.
I have been trying to figure out why I cannot access XMP Profile 2. As like the video screen, it is blacked out. Does anybody know how to make it come "alive?" No amount of Googling or ChatGPT'ng has come to a resolution.
I can't disable over clock I have exact same bios as yours In the video plz help all I'm getting is normal or expert as a option
I don't have all those settings. Tried updating BIOS. M-flash does not see the BIOS update files.
I don’t see a CPU boost button. Msi z490 pro and i7 12700k. Any idea?
U gained a sub thank you so much
Many thanks for posting this. Nicely de-mystifies bios settings.
3:14 live steams ? Is it on steam ?
After running game boost mode in BIOS, I get computer A2 error. The computer does not turn on. When I restart the computer, it says A2 on the motherboard, and when I turn it off and on again, the computer turns on. My motherboard is z790 carbon wifi. What do you think is the reason why I get the A2 error every time I turn on the computer for the first time? Thank you.
Thank you bro🙏🏾
Where in the Video you Turned on fastboot cant find it
Thank you for your work.
my 760 TOMOHAWK wifi mb is new and my 13600kf also new I have updated bios but it doesn't let me use the cpu game boost speed so I can't overcloack my cpu
I don't have any dedicated gpx card so should i put "Initiate graphic adapter" IGP or PEG??
Can someone help here? So i bought 2 MSI Z590 motherboards. Do i really need to connect a plug to the 6 pin PCIe connector at the bottom of the motherboard??
i got ASRock X570 Pro 4
but for some reason when i disable CSM i got only 4G decoding setting and i dont have re-size bar support?
ery clear and informative,
Ok I have specs of Ryzen 7 3600x, Rtx 3060 ti and 32 GB corsair 3600Mhz I have enabled XMP and I was thinking should I enable Re-size bar support? Will it give me any benefits with my current specs or should I live it as it is?
yes resize bar gives a good like 10% boost in fps for me
@@coolitd Ok Thanks you! well I already enabled it asked ChatGPT about it and only older games won't be benefited from the Re-size! So I enabled, as its good to have it enabled!
Everytime i try to change something on my bios, it freezes. Please help what to do
Hello l'ami, je suis un bleu en informatique, j'ai une carte mere asrock, j'avais 2 disque de 500Go en RAID, je l'ai fais supprimer et depuis mes disques ne montent pas, je les vois dans gestionnaire de peripheriques, je les vois dans diskpart/list disk mais je ne les vois pas comme le disque C dans une fenetre; quand je clique sur gestion de l'ordinateur ou gestion du disque ca tourne puis rien aucune fenetre ne s'affiche. Comment regler cela dans le bios ? Aussi dans le bios quand je mets en AHCI, il relance le pc et systematiquement ecran bleu, du coup j'ai mis en EDI mais bon ca mouline pas comme je veux car je voudrais utiliser mes HDD de 500Go chacun. Tu peux m'aider svp ?
how can i switch from UEFI to Legacy mode in ma Bios, i need to load linux via external usb, but when i try to do it instead, it always returns me to UEFI mode.
xmp always causes crashes eventually. I just manually adjust ram in the cpu overclock section
I can't, for the life of me, figure out what is going on with my RAM. I have an MSI board. I enable XMP (the RAM is rated at 3200Mhz), and no matter what the system will not POST until I clear CMOS.
Have you figured it out yet ? 😂
@@christopheralvarez1090 I did, actually. To run 4 sticks I had to buy 4 at the same time. Reading other's issues sometimes, even the exact same brand of RAM just doesn't work together if bought separately. I guess the actual modules differ enough if they have different manufacturers.
@@ronlouthain913 sound about right glad it worked ! I’m dealing with two Corsair vengeance sticks that can go up to 6000 MHz, but only can go up to 56 before they start to not post. XMP doesn’t work at all but MSI Memory Try it ! Feature was the only thing that got it to 5600 originally running 4800 MHz
My cpu is idle at 70degrees and going beyond 110degrees under stress
Tried all sorts of coolers and bios reset, what could be the issue ??
Note : At my bios homescreen, the CPU Core Voltage appears as 1.434 volts
(no oc, no custom settings)
See JayzTwoCents video
'" Motherboard Default settings could be COOKING your CPU! "I had to enable the Box Cooler setting and had to under-volt my CPU. I run a negative (-) Offset at 0.020 on a MSI z690 board.
Enhanced halt c1e and eist must turn off or keep on what should I do?
What do I do if I can’t see the game boost tab?? Pls someone help
Where can I find the bios on my desk top I have a ASUS Rog c15cx with windows 11 upgrade does hat change
Awesome, I appreciate your tutorial on how to use the MSI BIOS.
I’m sorry my friend, but I’ve never seen one of your live Steams!! What do you steam most?? Carrots, broccoli, onions?? 😂
(3:10)
What’s the hotkey to get into MSI bios? Still unable to do it on my keyboard sadly.
I just had replaced a failing asus rog strix b450f-gaming with a msi pro b550-vc wifi board which is supporting a 5700g, 16gb ram auto running at 2666mhz, and a msi mech 6750xt gpu. only thing i have done with the bios that came with the board was turn off the igpu (was noticing some stuttering in destiny) and enable resize bar... not touching overclocking.
I wish it was explaining everything and a full optimization but how to you get pch cpu lanes?
If my Display Adapter (GPU) doesn't support resizeable bar, I should leave "Above 4G Decoding" off, correct?
hi everyone I have a problem with the MSI GE62 6QC APACHE laptop, the CPU speed drops when opening the game and normal when not opening the game, please help me.
Would this work to optimize (even minimally for performance) an HP Elitebook with an i5 vPro?
Hey man. I put all the settings you listed. I am using rtx 3070 with i5-11600k but my gpu usage keeps being stuck at 50%.. I don’t know what to do.
It's your ram ,it's chalked.