Building a jig for DIY alignment

Do it yourself alignment
In this video I show how I build a home made alignment jig for the Porsche 944 to set the toe with repeatable results
Caster camber toe

[@tims_4x4_garage]

I didn’t mention this in the video, but I ended up cutting the driver side stability legs down to ~2” each side so it is easier to slide under the car. The 4” legs on each side were too tall to slide under the car. The passenger side still has the 4” stability legs.

[@thericbrown6969]

Hi i have a 1990 944 that i did a complete suspension overhaul..now i need alignment. Can you assist

[@tims_4x4_garage]

@@thericbrown6969 front and rear or just front? If all four and you want to do it at home set up strings and do it all by hand

[@NC944er]

Love the disclaimer for inevitable trolls. 🤣 Has this beauty been resprayed? Paint looks great!
Mine pulled slightly to the right before I removed the control arms for the oil pan job. After re-installation it drives perfectly straight. I marked the eccentric bolts and kept everything the same for the most part. Must have been dumb luck. 🤔

[@tims_4x4_garage]

Thanks sir, yes it was resprayed at some point, I’ve found some overspray. It’s no show car but it’s a pretty nice 10 footer.

[@justincrasi4638]

Im gonna do this thanks!

[@tims_4x4_garage]

Heck yea man