Hi, I just arrived and I would like to do the same configuration as you. Do you have any advice to give me or changes to make on this model so as not to damage differentials or anything else? I don't know the car well so you are much more expert than me!! Thank you
Hey the diffs have held up great for me on the stock parts. No issues. The typhon uses the same parts as the 7th scale infraction platform so it is nice and strong. Your good to go with just upgrading the motor and esc . I'd do a servo also . I'm running an nsdrs 400 now
@@RCKYOTA Thank you very much for the information I just have to order the 1721 combo and the x8s esc it will take some time the expenses are too much now, and then if I understood correctly you used 36T pinion and 50T crown Right ? Can you tell me where to buy the aluminum center differential support castle?
So far no issues, the arrma are kinda cool actually because they share the diffs in there 7th scale lineups . So it has the same diffs as the as infraction, limitless . Pretty beef
@@RCKYOTAAnd why do you write that the machine is equipped with a 1721/1260!! You're unreliable, you can't review a car with false engine specifications, what's the point, I don't understand, you're taking the piss out of people 😡 
Hey Jace it's just a 40x40x10mm fan I ordered off ebay, put my own connecotr on. If you jump on some of the Facebook rc groups tho my buddy fanwercs sells some pre wired alum super high speed fans you just pop on there and plug into a balance port
Wow that thing is fast with that 1721 1,260KV motor 88mph, i'm thinking about putting that same 1721 motor with either an MMX 8s or an XLX2 in my future Limitless V2 when i get it and just bashing it.
@@RCKYOTASorry I understand correctly, are you saying that the video you reviewed where you said that you mount the x8s 1721/ 1260kv motor really doesn't fit this engine but a beta one? what a motor if you can say that now that some time has passed
Awesome man it's a bad ass little buggy. The stock motor mount works fine if your staying 4s I upgraded only to fit the larger pinions and run 8s. It's a pps grub lock mount you cam get them here practicalproto.com/collections/frontpage/products/grublock-motor-mount-for-arrma-6s-blx-platform
@@rayjohnson5875 should hold up to the power, has the same diffs and gear setup as a infraction or limitless. It could use some stiffer shock springs and maybe thicker oil. You need a servo also.
Finished mine a couple of weeks ago and I love it, what pinion do you recommend, 22tooth seems to be a little bit aggressive for an off-road basher 😂 also, have you messed with the new 2200 castle motor, just wanted to ask how people are liking it if they’ve run it ❤
Nice , I have the new v2 1515 installed in this car now and it is awesome . I normally run it on 4s with a 20T at the track and it's way faster than most of the cars. I slapped a 6s in it for bashing and it's jsut insane. Too much power. I changed the harness to a single plug so no more 8s for me
Get rid of those hoons and get grp's
Proline Avenger for better grip, 40t/24t for speed
It handles better on GRP the Hoons just make it slide.
Ty-fun.........not typhoon. Lol. Awesome job on the buggy. These things are crazy from the factory, can't imagine upgraded 8s.
That's a ton of power to put in a Typhon! 😱🚀
It's so fun to drive. The tires are dead tho lol
@@RCKYOTA great car bro, you considered getting a centre spur gear, instead of the diff?
youll be surprised how well she performs on every level.
@JM-500 JM-500 I have a Pinocchio spool for it but I normally just run it at the race track where the center diff is beneficial
@@RCKYOTA yes sir, fair comment. Thanks 😊
Badass man! That is insane. Love it!
Hi, I just arrived and I would like to do the same configuration as you. Do you have any advice to give me or changes to make on this model so as not to damage differentials or anything else? I don't know the car well so you are much more expert than me!! Thank you
Hey the diffs have held up great for me on the stock parts. No issues. The typhon uses the same parts as the 7th scale infraction platform so it is nice and strong. Your good to go with just upgrading the motor and esc . I'd do a servo also . I'm running an nsdrs 400 now
@@RCKYOTA Thank you very much for the information I just have to order the 1721 combo and the x8s esc it will take some time the expenses are too much now, and then if I understood correctly you used 36T pinion and 50T crown Right ? Can you tell me where to buy the aluminum center differential support castle?
Damn that thing is a beast...how’s your diffs holding up with that power
So far no issues, the arrma are kinda cool actually because they share the diffs in there 7th scale lineups . So it has the same diffs as the as infraction, limitless . Pretty beef
Geez... lol so much power
Looks like a beast!
Cool rc !! The X is fit on chasis? What KV do you use for esc?
Yes the mmx8s fits . For 8s I stayed under 2000kv
@@RCKYOTA how do you have your esc clamped down, i just bought the same one?
@@jdubjtw I have one and I double side tape and a zip tie just in case on the stock esc plate
@@RCKYOTA are you running the 1721? Cause my 1717 in my basic typhon doesn’t come close to the rear hinge
@@davidlinde4265 yes . A protype version of the 1721 that is unreleased.
How many mah and c is each 4s battery ?
4300 120c
@@RCKYOTA thanks 👍 I have too tlr and i am thinking to buy two 4s batteries.
@@strexttp these are nice batteries. Good for racing on 4s. Or for light weight 8s build. Just expensive
Sounds like the whine of an LS Vortech supercharger, lol.
Love their lineup of cars just not a fan of their hard tire compounds. Honestly I just wish they would of developed the rear shaft better
Can the motor be revealed yet please ?
I can't. Im sorry it was never released and did not pass the prototype phase
@@RCKYOTAAnd why do you write that the machine is equipped with a 1721/1260!! You're unreliable, you can't review a car with false engine specifications, what's the point, I don't understand, you're taking the piss out of people 😡

🔥🔥🔥🔥 That lil thing is quick as hell!
Where did you get the large esc fan from just picked up a mmx 8s esc and just wanna be safe with my heat temps also gonna subscribe
Hey Jace it's just a 40x40x10mm fan I ordered off ebay, put my own connecotr on. If you jump on some of the Facebook rc groups tho my buddy fanwercs sells some pre wired alum super high speed fans you just pop on there and plug into a balance port
Wow that thing is fast with that 1721 1,260KV motor 88mph, i'm thinking about putting that same 1721 motor with either an MMX 8s or an XLX2 in my future Limitless V2 when i get it and just bashing it.
It's a solid basher motor. Def not a speed demon but runs great on 8s .
@@RCKYOTA It looks like it runs great, I might put that 1721 with an XLX2 in my future Limitless V2 it will also have a center diff.
haha crazy man ! i like that !
Real fast Typhon there!!!
Thanks man! Super fun car
@@RCKYOTA have you clock the top speed?
Its shiftin!!!
@@linzitazim I got it up to 90 on 36/50. Needed better tires
What pinion did you have to use to clear? Would like to see some slower pics if possible!
I thinkni had to put a 36 on it . Which photos did you need?
That's awesome video buddy 😀 🇬🇧 👍
Thank you !
What about the gold hoons? Aren't they supposed to have the most grip
I'll have to check them out.
Great bro. I have subscribed your channel👍
Thank you Steve I appreciate it 🙏
Where did u get the motor mount at
Ppsracing
Hey man is that the 1260kv ,1650kv, or the 1721 2400kv?
@@RCKYOTA hmmm im thinking 1750kv
@@RCKYOTASorry I understand correctly, are you saying that the video you reviewed where you said that you mount the x8s 1721/ 1260kv motor really doesn't fit this engine but a beta one? what a motor if you can say that now that some time has passed
Nice video and car!! Great location! 😀
Thank you !
@@RCKYOTA we subbed, please check our channel 😀 👍
Change your gears
I put it back in 4s mode. It's an offroad buggy was just having some fun with it . With spare parts I had laying around
Just ordered the car should be here Monday....
Could you tell me what motor mount you are using and a link if possible thanks
Awesome man it's a bad ass little buggy. The stock motor mount works fine if your staying 4s I upgraded only to fit the larger pinions and run 8s. It's a pps grub lock mount you cam get them here
practicalproto.com/collections/frontpage/products/grublock-motor-mount-for-arrma-6s-blx-platform
@@RCKYOTA yeah I'm wanting to go 8s.. either mmx8s or the xlx2
@@RCKYOTA thanks for the info... any thing else I should get or do putting that much power to it
@@rayjohnson5875 should hold up to the power, has the same diffs and gear setup as a infraction or limitless. It could use some stiffer shock springs and maybe thicker oil. You need a servo also.
@@rayjohnson5875 xlx2 won't fit without some serious modification or cutting the body .I tried that first . I have 4 or 5 of them here
Finished mine a couple of weeks ago and I love it, what pinion do you recommend, 22tooth seems to be a little bit aggressive for an off-road basher 😂 also, have you messed with the new 2200 castle motor, just wanted to ask how people are liking it if they’ve run it ❤
Nice , I have the new v2 1515 installed in this car now and it is awesome . I normally run it on 4s with a 20T at the track and it's way faster than most of the cars. I slapped a 6s in it for bashing and it's jsut insane. Too much power. I changed the harness to a single plug so no more 8s for me
Need different tires bro.
I know it's all I had laying around. Any recommendations?
@@RCKYOTA Grp's or sweep's
@@RCKYOTA Bananna skinz foam tires for speed runs
@@TKO593 I would do those but they don't hold up to drifting . Somthing that can do 100 plus and drift woould be ideal