The cars been sold, never dynoed it, the lift was a 270, yes they're for performance not just sound, and the decklid was purchased from Blue Oval Industries
It sounds amazing but surprisingly the stock cam would probably have a flatter torque curve. Most cams like this die on the bottom end and scream on the top end. Cool, but not ideal for a street car. I'm going with FRPP Hot Rod cams. Sounds almost as good but is supposed to have much better street manners.
Bama wrote my tune for my cammed 2v and they nailed it first shot, I followed up with a dyno run and tune was verified correct. I performed my cam swap three year ago and tune is great, drive ability, idle, acceleration all good!
this is the best sounding 3v on here. and this is the exhaust setup I'm going to be running w my mutha thumpers. mine is a 3" system so we will see how she sounds! glad I could contribute to half of your views
@120506torque It was still learning idle that day since I had just had them installed the day before....but you can set your idle to a lower RPM with a tuner. Mine is set at at 700
BoneCollector480 you can make 370rwhp with these just from.bolt one and these cams. plenty of videos on here of 3v dynos making over 350rwhp with bolt ons and these cams. head and cammed ls1s only make like 380 depending on the year.
Maybe a dumb question but I’m planning on getting a 3V this summer and know that it doesn’t lay down all that much power even after tastefully modding it but is it uncommon for people to swap coyotes in there?
Fatal Motorsports I have them in my 10 gt, it takes it down a bit I get 17 a gallon highway if I take it easy on the loud peddle and about 15 city. You do get compliments and looks everywhere you go though.
grizzly2890 frankly, most people put some long cams just for the dirty idle. its a fantastic sound that build on the premise that you own a old school mustang.
Did the car make a whistle sound while accelerating after the cam swap? My car does and I need to know if its a big problem or not. Some people say its the sound of more air being sucked in the intake is that true?
abe ren I just bought this same year. GT I want to just make minor adjustments nothing big. Until I buy a brand new one and there I will start. This is just my first
The cars been sold, never dynoed it, the lift was a 270, yes they're for performance not just sound, and the decklid was purchased from Blue Oval Industries
Wat yu end up gettin
The lift should be way more than 270. My cams in my 4v are .425. should be simlar
@@a29s12 he is talking about the duration, not the actual lift of the cam.
Jets Set 5.0 2007 GT500
@@a29s12 I think he meant duration
I can't wipe this stupid smile off my face.
Personally, I think this is the best sounding cammed 3v on RUclips.
It sounds good but you need to listen to mine when I have the Cutouts open lol
This car is the reason I cammed my car it does sound amazing
It sounds amazing but surprisingly the stock cam would probably have a flatter torque curve. Most cams like this die on the bottom end and scream on the top end. Cool, but not ideal for a street car. I'm going with FRPP Hot Rod cams. Sounds almost as good but is supposed to have much better street manners.
nola504boy1 Yours sounds like a trash can in a washing machine lol
I didn't notice much of a difference besides the slight chopping. To quite for my liking
I think this might be the baddest sounding 3v I’ve ever heard
It's almost dying because of the Bama tune. I had Brenspeed make me up a tune for my cams and it was better than anything I ever got from Bama.
Bama wrote my tune for my cammed 2v and they nailed it first shot, I followed up with a dyno run and tune was verified correct. I performed my cam swap three year ago and tune is great, drive ability, idle, acceleration all good!
this is the best sounding 3v on here. and this is the exhaust setup I'm going to be running w my mutha thumpers. mine is a 3" system so we will see how she sounds! glad I could contribute to half of your views
Sounds sick. Can't quit drulling. I ordered my cams and phazer kit and springs I'll have to post a video of mine when I get it done.
like a beast, literally
2023 those Cams cost 900 dollars
Damn I love the crackel and pops it makes
Definitely by far the best sound 3V I’ve heard
Just Cars 24/7 thank you I wish I still had it.
Abe GT500. Dont worry. It's in a good home now. It shares a shop with a '66 sprint 200 and a '68 California Special
Im jealous, cant wait to do this on my car, sounds like maybe you need a throttle body clean idle kinda dips when you crack the throttle a little bit
@120506torque It was still learning idle that day since I had just had them installed the day before....but you can set your idle to a lower RPM with a tuner. Mine is set at at 700
Sounds amazing bout to get rid of my challenger for one of these
I'm getting 17 on the hiway and 16 in the city, not too bad I guess lol
Sounds exactly like what an old American v8 muscle car would sound like. Music to my ears!
Hey man was wondering if you could make a video of some regular accelerations to heat it on the throttle🤘🏽 it sounds nasty
If this is a standard did you have any jerking going while in 1st trying to go slow?
I have stage 1 comp cams and yes there is a little bit of jerking while driving slow or maybe its just me idk🤷♂️😂
you will have to re-adjust to driving it with cams but its not bad.
Just got my car cammed waiting to get it back, sounds dope man.
Which car
Love this sound! Perfect music lol
best music ever lol!
I dont like the sounds of cammed cars but the rev is godly
What kinda exhaust system are you running I love the sound
Man holy shit I thought it was cammed the whole video, when I saw what it sounded like cammed it completely convinced me that I need a Mustang 😂
cleaned it out today, thanks for the tip....goodluck with your car I definitely do not regret camming my stang even if im only getting 15 mpg now lol
Comp Cams Mutha Thumpr NSR 234/254 Or ??
1:18 _Sounds like an 05 Hayabusa around this mark._
First one sounds a bit like the 2005 ford GT43
What exhaust ?? I like the sound 😮😮
great sound sounds like my dirt track car i have never get tired of the sound of a cammed engine
did your idle rpm change after they were installed?
Nice rumble, hard to get a good one with the 3V. It's a shame these things aren't power makers.
BoneCollector480 you can make 370rwhp with these just from.bolt one and these cams. plenty of videos on here of 3v dynos making over 350rwhp with bolt ons and these cams. head and cammed ls1s only make like 380 depending on the year.
you probably drive Honda
aMcSpank bro I love mustangs but to say ls1s only make 380 with head cam is rediculous. Try mid 400s at least.
Yeah i have a ls6 with bolt ons and a ms4 cam and i put down 440 hp and 426 tq to the wheel
Maybe a dumb question but I’m planning on getting a 3V this summer and know that it doesn’t lay down all that much power even after tastefully modding it but is it uncommon for people to swap coyotes in there?
Do you have any exhaust rasp when accelerating around 2500-3500 rpm?
Is ur car stock with cams?
Can't decide between these or ford racing hot rod cams
These don't really give much in the way of power gains. The Hot Rods do give a nice gain and sound fine.
How's your highway mpg? I get a highway average of 30mpg in my 2010 GT, so I'm nervous about installing these on mine. :/
Fatal Motorsports I have them in my 10 gt, it takes it down a bit I get 17 a gallon highway if I take it easy on the loud peddle and about 15 city. You do get compliments and looks everywhere you go though.
Sounded good before. Sounds wicked after... I have. A 2010 gt . What exhaust ya have ?
What is your idle set to?
Hey man about to purchase some. What did you replace or improve before installing them?
i would never turn my car off if it sounded this good and i even have a cammed 2005 gt too
RIP neighbors
@@TimSzabo facts lmao
I can't say anything but its bad ass Im gettin me some and did u do anything for them to have that slow lope like its going to kill i love that
Will this cam fit a 2v
Abe GT500 whats the exhaust setup on the car i love the sound
Why do i feel like this video couldve been like 53 seconds…..
What a lovely sound!
What cam is this... i know its a mutha thumpr but whats the specs
Was this before dyno tuning it? It seems like its not running right wants to stall...
That's what cams do.
no, they dont with a properly tuned car thats why i asked if it was tuned before this vid was taken
grizzly2890 I think its idle is just set to low. I set mines low like that for car shows & car meets.
grizzly2890 frankly, most people put some long cams just for the dirty idle. its a fantastic sound that build on the premise that you own a old school mustang.
Yep it sounds a lot nicer we'll worth it
Love the race car sound! 8-) How does it drive now?
Sounds great, to bad bottom end is a turd!
What exhaust setup are you running?
Now that is one purring Mustang!!!
That’s a good parts car you got there
What stage mother thumpr looking to do this to my stock 3v
Does this car have silver shelby rims? Think ive seen it before
How much was your install or did you do it yourself?
What kind of tune did you have ?
Have you dyno tested it yet?
Omg. That's sounds so nasty. Bad ass.
Did you have any problem getting it back in timing with those miles without changing your tensioner or chain?
I noticed more high end torque, never got it dynoed though
Did you dyno it after the cam install or did bama send you a tune for cams? Or are you not required to tune for this setup
Norlin E. Casas bama did the tunes, you WILL need one.
Do you still still have the car
That sounds badass dude...nice Pony.
souds awesome! with your long tube headers... do u still have your EGR system? or is it plugged, blocked, deleted?
Como se llaman esos arbol de elevas ?
I prefer hot rod cam 🙃🙃
Did those cams add any power, or is it the same with just a different sound?
Are these 234/254?
hey bro where did you get the GT emblem for your rear delete ?
Check Americanmuscle.Com
What exhaust was that?
that will never get old
I really want to do this to my S197, but when I heard you get 10mi to the gallon. Nope
Jerry Peterson I got a five speed 3v and gas mileage isn’t an issue I get 24 average but 28 if your cruising down the highway
Come on buddy it's only for the weekends not for for daily driver,
How much hp on just cam
Where did u get the rear deck panel ? I like that a lot.
Sounds sick
This sounds so good!
Did the car make a whistle sound while accelerating after the cam swap? My car does and I need to know if its a big problem or not. Some people say its the sound of more air being sucked in the intake is that true?
Normally headers are what whistle.
I had LT headers for a year before I put Cams in and no noises at all
+Betty Its probably your intake. Since you put a cam in, it'll be taking more air in
Betty my car does the same now thats its cammed it perfectly normal its the engine sucking in more air
How much hp do these cams add?
GT!!!!!
Do you get better gasmilge ?
no it got worse by a bit.
What was the rpm set to?
Did u have to tune it bro ?
Alonso Borja yes, definitely.
Kinda sad to think a cammed fbo 3v makes like 320 whp
Thats definetly enough to have fun and do burnouts.
Vertti syrjälä not really only ig if its like drift car but I doubt he only do burnouts he’s limited to who he can race
5. SLO Well yeah. But you can do other things with your car than just going fast on straights
Vertti syrjälä like what going through the canyons ? I’m just saying your limited with that 300 hp
Sounds awesome any tuning issues
Damn sounds good!
Dayum!!!!
Thing sounds sick. Good job!!
Aye bro what stage are they?
Stage ??
Which tuner and you only had the 93 tune ?
SCT with BAMA tune from american muscle
Did they send you a special tune or the preloaded is the one you used abe ren
@@mrslots9229 they made one tailored to the bolt-on's that were on the car at the time.
I haven't touched it so I guess it's still there
wats the lift on that cam
@mathewmunoz74 it's tuned by Bama Performance
I just had an eargasm
beast........
Ghost cam tune
nope. you can't have a ghost tune on a sohc
Yo whats this exhaust system?
Cody Garza BBK Long tube headers, catted X-pipe and Pypes muffler delete axle backs
abe ren that sounds incredible bro
Cody Garza yea it was pretty dope, got a bone stock ‘07 GT500 now and time to start all over again
abe ren I just bought this same year. GT I want to just make minor adjustments nothing big. Until I buy a brand new one and there I will start. This is just my first
60K
4.6 3v ???
Yep it was.
1 I believe