I join the last comment! Great job done! Could you share the dimensions of the mechanism? Interested in the basis - distance between the holes... I can't get my wings to open normally...
Not sure if this will be seen, but could you post the measurements or schematics somewhere? I'm trying to replicate these, but even being an inch off screws it up.
Hi, wondered which size and what type of force/weight specs is the linear actuator used? Also what sizes did you cut for the metal frame? I’m attempting similar and a bit lost on really which articulate to use as I want a 6’ wingspan
Nice work ^_^ What type of linear actuator is it? I mean: volts, size... And also, Do you know a way to control the speed of the opening of the wings? If I want to open a little slower for example Thanks
since it is basically just a dc motor the simplest way to control drive speed would be adding a potentiometer because then you can then change the speed as you need it I created a little schematic here imgur.com/a/sjafK basically all you need is - chordless 12v drill (to take out the battery so you have a cheap and rechargeable battery) - potentiometer - 3 way 2 pin switch - linear actuator - red wires (would reccomend 0.75 mm² to 2.5 mm²) - black wires (also 0.75 mm² to 2.5 mm²) - a fuse socket - a fuse with a matching size for the actuator (easiest would probably be using car fuses). find out how many Ampere it needs when it is working quite hard e.g. with a multimeter and the buy a fuse fitting this value or the next bigger fuse.
please share how to build the framework. thanks.
great work...could you share the sizes of the bars?
Regina Fletcher yeah I hope he or she does share this are amazing 😍😍😍
What was the measurements on your poles that you used for your wings I'm trying to build a set of Hawkman wings and I like your setup
سبحان الله وبحمده سبحان الله العظيم
I join the last comment! Great job done! Could you share the dimensions of the mechanism? Interested in the basis - distance between the holes... I can't get my wings to open normally...
Not sure if this will be seen, but could you post the measurements or schematics somewhere?
I'm trying to replicate these, but even being an inch off screws it up.
Hi, wondered which size and what type of force/weight specs is the linear actuator used? Also what sizes did you cut for the metal frame? I’m attempting similar and a bit lost on really which articulate to use as I want a 6’ wingspan
I suppose you can measure the proportions by using a ruler against the screen, and you may be able to eyeball the actuator force
Danke, was die Federn betrifft, da bin ich noch nicht sicher,aber mal schauen!Sobald ich die Flügel komplett fertig habe,gibt's ein neues Video!
Nice work ^_^ What type of linear actuator is it? I mean: volts, size...
And also, Do you know a way to control the speed of the opening of the wings? If I want to open a little slower for example
Thanks
since it is basically just a dc motor the simplest way to control drive speed would be adding a potentiometer because then you can then change the speed as you need it
I created a little schematic here imgur.com/a/sjafK
basically all you need is
- chordless 12v drill (to take out the battery so you have a cheap and rechargeable battery)
- potentiometer
- 3 way 2 pin switch
- linear actuator
- red wires (would reccomend 0.75 mm² to 2.5 mm²)
- black wires (also 0.75 mm² to 2.5 mm²)
- a fuse socket
- a fuse with a matching size for the actuator (easiest would probably be using car fuses).
find out how many Ampere it needs when it is working quite hard e.g. with a multimeter and the buy a fuse fitting this value or the next bigger fuse.
@@VivSlakes this answer is awesomel Looks great man, thx for sharing!
Wau, sehr gut gebaut. Welche Befederung, oder Bespannung machts du drauf?
Thank bro, i find it long time
How does this work...I need this and love it!!
the steps to do it? and items required?
is there a reason for the slotted holes?
Is this flat bars or square tubing
Could you please share or post the mechanism design please ?
meu amigo sou do brasil ,gostaria de saber onde compro o motor que vc esta usando para mover o mecanismo , em que ele e usado ,obrigado
Pelo que eu pesquisei parece que se chama atuadores lineares
Hallo, ich liebe die Flügel, was ist das Gefühl der Pfeifen.
Please share sizes of bars that would be great 👍
What was your power supply? Were these wings made to wear for cosplay?
I have some of these but with a string
Tutorial???
Can this me controle with a remote control?
Yes ist possible!
Song???
Ola! informa as medidas.
Cool music period, but unfortunately this won't fly.
صنع جنحه لباسكل
3/7 commenten auf Deutsch . . .
Tem as medidas?