Hello all! I see some of y’all would like to know how to scale the wings up considering they’re quite small, so I’ll let y’all know how I did it! it’s originally 20 inches for the larger planks, so I made it 30, this means -the 8 inch space becomes 12 -the 11 inch planks become 18 inch -you can leave the .5 inch gaps from the end and the 3 inch gaps for the joints, they aren’t affected These measurements still hold up to work, and provide a much larger wingspan than the one the original design provides. If anyone has further questions, lmk!
Rita Ferrell no, the design is made for two wings on both side, while the inner 'diamond' shaped area is for your back. You'd only have to make one set for both wings :)
Not related to scaling it up, but how did you wear it? Was it through a backpack like the video or through a harness? If it's the latter, how did you do it?
@@rindibout Same I'm just filling it in with mostly parts of characters. I'm not gonna be anyone from mha. I'm planning to cosplay as Pit from Super Smash Bros
I’m gonna cosplay hawks too! I kinda already know how to make the wings but I was thinking how much cooler it would be if they moved so that’s why I’m here 😂
I'd suggest using a washer in between each piece of wood where they connect. Lock washers would be excellent for staying in place and not loosening up as well.
And boom I have a Halloween costume, thanks for making this! It’s the only useful video I could find on the subject. But I do have one question how would you add feathers or attach it to a harness?
Doggo King Again I know it’s late but if you’re still interested, thecrookedfeather creator posts youtube videos you can take reference from, but her videos are a bit vague.
Imagine how cool it would be to make a hang glider and just turn it into cosplay wings and just using hawks quirk irl I wanna figure out how to do that
Great job guys! Simple, yet very descriptive. I watched countless hours of videos, and decided to use your design as my inspiration. I'm using aluminum fence spindles as my frame, fabric and real feathers , and a linear actuator to open. I'm making 12 sets of wings for a high school show choir group. Each will have a 7 1/2 foot span. I even made my own RUclips video for those interested. Thank you, thank you, thank you.
Please add some sketch and meassurement. And for further development, you might want to use triple layer of thin wood for each stick. That way you can insert one another to get better center alignment, instead of put it on one another. Just an suggestion.
honestly you should find fabric that's red like his wing and feathers (no hot glue needed hopefully) get a piece 2x bigger than the wings don't put the fabric on before put the fabric on the front and back of the wings and then sew it together if you want them to be chunky add cotton inside or just leave the cotton out and after you sew the structure of the wing tight around the wing with the fabric and the cut off the access (i'm so sorry but i don't know how you would be able to but the feathers on me neither but good luck i hope you the best!
Looked into all other designs of RUclips and finally here, the best thing about your design is that its simple and sturdy, cause noone wants a wing to break in the middle of a show.
My only problem with this is, mine would be covered with feathers and would be pretty large, how would I be able to move them is there’s not a single piece of wood to grab?
I’m thinking about going as Maximum Ride and I was looking on how to make wings and I found this. I’m not sure if my mom will let me do it but she might. I’m wondering how to make it look good though with like the feathers and everything. Like how do you dress up the main structure
If you don't want to worry about the bolts and nuts coming loose from all the movement, instead of using the standard washer, use a compression washer...you know, the ones that are a little thicker and they are split on one side and bent a little so that when you tighten the nut down, it causes compression and keeps the bolt night tight against the thread, and it won't come loose! Just don't tighten it all the way down or you won't be able to "spread your wings" (you're welcome) :P
@@serena3170 hi! I was hoping someone would help with this! Thank you! I just have one more question: what mind of fabric should i use, and should it be loosely sewn on for movement?
@@venom.strike6999 Hi! I'm so happy to help, personally I just used an old white sheet because mine were angel themed, really anything is ok, I do suggest something lighter though especially if you attach the feathers how I did in the end. A lot of the process for me was pinning and repinning to see where I needed to sew so that the wings would move. For most of the wings there was only a centimeter or so of space between the wood and the stitching. For the feathers, (this is a lot of work but I loved how it turned out for my purposes) you can get fake feathers and use a needle with thread on it to go straight through the shaft, then going down into the fabric and back up again to repeat the process, (almost as if you were sewing a bead into fabric) making for a fairly clean and unnoticeable attachment.
You mentioned that these where sized for a kid. To make them adult size would I simply lengthen the pieces while keeping the hole patterns the same ?? That all I need to know the rest was great and I love them thanks
I would also like to know how thick the wood is in the dimensions because I'm currently trying to make these wings but I'm not sure what wood I should use.
This was so helpful! I love this idea and how simple you made it seem to make it, and I'll definitely be considering using your video to make part of the halloween costume I (hopefully) will be able to pull off :)
Hello, I would appreciate knowing how to make the design of the wings and add them to the wood, I am not sure how to put the feathers so that when moving the wings it looks good and how to make one move the wings at will, thanks
Tank's for you tech me...I always lernd about that..to make wings (tutorial )..terima kasih from me In Indonesia..Tuhan Yesus kristus memberkatimu...amin..!
Finally I'm finally able to cosplay as my OC bunzzy she has black and white hair she absolutely loves bunnies and she also has black wings it's amazing thank you so much for this very easy steps I'm going to ask my dad if he can help me but thank you so much I love this channel:) ❤️❤️👌👌👍👍😊😊
Out of curiosity, what are you guys making these wings for?i want to see how many people are also making Hawks 😂 Update 8 months later: I still haven't made them 💀 💀 💀
I literally went through dozens of video for an efficient pair of wings,🥵 already bought the materials today, now I just pray 🙏 and hope your design works as shown cause I got a film to shoot this Saturday with it. 🙄
I really wanna make a Hawks cosplay, but my dad isn't the construction type so I know he doesn't own any of the things shown here aside from (maybe) some nuts and bolts. Is there a way I can make this using cardboard?
I haven’t tested this out, but I think that if you make the two sides separately and put them on a base and string the top or bottom of each side, you can make them work separately. So like a string on either the top or bottom point of the diamond once they’re apart, then add like a ring or tube to hold the string in place that is attached to the base, so when you pull the string the wings extend. Or you could keep the two together and do the same so that way you could open and close them without having to do it manually. It’s a bit hard to put into words and will need a base for it and way more effort, but in case some wants this, I’ve been thinking about it for a while. All in theory but ima update this if it does or doesn’t work.
I'm here to say I am _not_ cosplaying as Hawks, but I am going to make some big ass feathery angel wings to assert my dominance and superiority
I am gonna be cosplaying hawks but I am 100% wearing the wings to show dominance over everyone I meet 😅
I'm going to attempt to make mothman wings (I can't find any to make my arms the wings)
I might be better off *winging* it
Same 😭
@@forgettableallosaurus7916 ah, the pun-tential
@Saidon Ra Thank you! :)
Hello all! I see some of y’all would like to know how to scale the wings up considering they’re quite small, so I’ll let y’all know how I did it!
it’s originally 20 inches for the larger planks, so I made it 30, this means
-the 8 inch space becomes 12
-the 11 inch planks become 18 inch
-you can leave the .5 inch gaps from the end and the 3 inch gaps for the joints, they aren’t affected
These measurements still hold up to work, and provide a much larger wingspan than the one the original design provides.
If anyone has further questions, lmk!
Do you need to make two sets of these for both arms?
Rita Ferrell no, the design is made for two wings on both side, while the inner 'diamond' shaped area is for your back. You'd only have to make one set for both wings :)
@@butterpiggie9624 ok thank you so much
Not related to scaling it up, but how did you wear it? Was it through a backpack like the video or through a harness? If it's the latter, how did you do it?
how thick did you cut your wood?
me bored in quarantine and interested in cosplay watching this: 👀👀
sam Same I literally made a Playlist called quarantine cosplay projects lol
how did u know
@@rindibout Same I'm just filling it in with mostly parts of characters. I'm not gonna be anyone from mha. I'm planning to cosplay as Pit from Super Smash Bros
I am looking at ideas for my dragonet cosplay for Halloween.
Same
I love how so many people are here for either Hawks or Philza and a few for Grian
I'm here for grian! more specifically cuteguy lmao
@@RhyxelzI'm here for YHS Grian lol!!
Yes grian!
I'm here for Phil, Quackity, Grian, Techno, and Wil lmfao
here for grian 🫡
Thx I needed this for my cosplay for my hero academia
Hawks? xD
Same ;)
Same! I need to make them for hawks
Mood XP
LOL- ALL OF US HAVING THE SAME IDEA--
Me: "hey dad can i borrow wood, nuts, and bolts?"
My dad: "why?"
Me:...
Me: "its for a thing..."
(I wanna cosplay hawks
I’m gonna cosplay hawks too! I kinda already know how to make the wings but I was thinking how much cooler it would be if they moved so that’s why I’m here 😂
@@cassbenitez3885 nice!
samee😫
Cool
ME TOO
I looked up Hawks Wings and found this- and as I’m scrolling through the comments I’m realizing that half of these comments are about Hawks 😂
yeah I wanna do this for maximum ride bird wings-
Yeah
yep
I just wanna be a harpie for Halloween ;w; tho Hawks is cool to -w-
Yep 😂
I'd suggest using a washer in between each piece of wood where they connect. Lock washers would be excellent for staying in place and not loosening up as well.
Be honest, how many of us watching this are wanting to cosplay Hawks?
Edit: I'm returning because of Philza Minecraft.
Stop outing me
Lol, I'm getting the cosplay for my birthday
Are you watching me?
....yeah
OMG IM GETTING CALLED OUT
TvT
now i can cosplay philza and grian the more knowledge i get from making moveable wings like this !! thank you so much, genuinely
yoo finally another person who wants to make a philza cosplay and not a hawks cosplay
@@traumatizedllama5370 hell yeah, philza minecraft supremacy. same for grian and some of my MCYT aus :) gl on your cosplay man!
@@GothicCorvid good luck on your cosplay too!
@@traumatizedllama5370 thank you !!
I'm here to learn for a Grian cosplay lol
IS IT ME OR EVERYONE IN QUARANTINE IS GONNA COSPLAY AS HAWKS?!!!
When you can't see pretty boys you become the pretty boy
cool Cool LMAOOOO FACTS
I feel so attacked by this comment section but facts ..lol
@@coolcool9922 you didn't have to expose me like that yk
See the hawk, feel the hawk, be the hawk :>
I needed this for my cosplay for Hawks from BNHA, thanks!
Me: dad! You work in construction correct?
Dad: yes
Me: alright I need nuts, wood, and bolts
Dad: why?
Me: shush! No questions! I just need them!
This is exactly how the conversation went for me 😂
My dad likes to work with wood and I asked him to help me but I think he forgot XD
I did ths with my dad XD
I’m hoping I can get what I need for 20 dollars at my local hardware store I don’t want my dad to ask me questions-
And boom I have a Halloween costume, thanks for making this! It’s the only useful video I could find on the subject. But I do have one question how would you add feathers or attach it to a harness?
Just wait
Doggo King kool
If u really wanna be the best on halloween try building mechanical wings
I know it's been a while, but I guess you could stick fabric to it and glue or sew the feathers on
Doggo King Again I know it’s late but if you’re still interested, thecrookedfeather creator posts youtube videos you can take reference from, but her videos are a bit vague.
Everyone wants to cosplay Hawks and I’m trying to make Tamaki’s wings 😂
Imagine how cool it would be to make a hang glider and just turn it into cosplay wings and just using hawks quirk irl
I wanna figure out how to do that
Man i just want wings
Bro I just want them for tokoyami but with like wings bc I think it'd be cool :'3
And im trying to make wings for my armor
I'm just trying to do it for a Philza cosplay-
Great job guys! Simple, yet very descriptive. I watched countless hours of videos, and decided to use your design as my inspiration. I'm using aluminum fence spindles as my frame, fabric and real feathers , and a linear actuator to open. I'm making 12 sets of wings for a high school show choir group. Each will have a 7 1/2 foot span. I even made my own RUclips video for those interested. Thank you, thank you, thank you.
your youtube video isn’t up! i’m very interested and i’d like to see how you do it for inspiration because i am very very stuck.
where is the video?
Where vid?
Needed this for my Crowley cosplay! Thanks yall uwu
Me toooo I'm here for your same exact reason!! Hope this works XDXDXD
Me toooo!!!! 😅😆
I’m also cosplaying Crowley!
Please add some sketch and meassurement. And for further development, you might want to use triple layer of thin wood for each stick. That way you can insert one another to get better center alignment, instead of put it on one another. Just an suggestion.
me: mom you can make things right
my mom: yeah
me: *spams this video to her* h e l p p l e a s e
The amount of Hawks comments-
Lol
Thank you so much! Needed this for an aziraphale cosplay
AYEEE noice I’m doing a Crowley cosplay. Lemme know how they turn out!
How did ur wings turn out?
ME TOOOOOO
How do u put fabric on. I'm making wings for my hawks cosplay from my hero academia
honestly you should find fabric that's red like his wing and feathers (no hot glue needed hopefully) get a piece 2x bigger than the wings don't put the fabric on before put the fabric on the front and back of the wings and then sew it together if you want them to be chunky add cotton inside or just leave the cotton out and after you sew the structure of the wing tight around the wing with the fabric and the cut off the access (i'm so sorry but i don't know how you would be able to but the feathers on me neither but good luck i hope you the best!
other people wanted to cosplay hawks:
me wanting to cosplay DreamXD: 😌
NO CAUSE THATS ME ASWELL. DREAMXD WITH WINGS IS SUCH A COOL CONCEPT SHIUHS
YOOOOOOOO
POG
YOO ABSOLUTELY POG. FOR ME ITS PHILZA AND GRIAN :D
YOOOO! IM DOING PHILZA AND QUACKITY!
@@Ghostinthesheets QUACKITY POGG?? i already said but im doin phil and grian :D
even though this was 5 years ago, this has helped me out so much!!! thank you for making this video.
everybody wants to cosplay hawks, and here’s me just wanting wings for no reason
Relatable
Literally same
Same XD
Looked into all other designs of RUclips and finally here, the best thing about your design is that its simple and sturdy, cause noone wants a wing to break in the middle of a show.
My only problem with this is, mine would be covered with feathers and would be pretty large, how would I be able to move them is there’s not a single piece of wood to grab?
Put a string on the outside pieces so you grab the string and lift your arms up and the will open
U can use a certain type of frabric and glue or saw your feathers on and it would keep the movement.
Im sure you can use wood glue and overlap the feathers (I know I am *very* late to the question but this is for the people who need another answer lol
Can you help me with the size of the wood. She said 30 in but the place I’m shopping you have to put two numbers (ex. 30in x 12in)
I’m thinking about going as Maximum Ride and I was looking on how to make wings and I found this. I’m not sure if my mom will let me do it but she might. I’m wondering how to make it look good though with like the feathers and everything. Like how do you dress up the main structure
Same
I’m going as Nuge
Same
I love it you should
omg i wanna cos maximum ride too!
Yesss Maximum ride is amazing
If you don't want to worry about the bolts and nuts coming loose from all the movement, instead of using the standard washer, use a compression washer...you know, the ones that are a little thicker and they are split on one side and bent a little so that when you tighten the nut down, it causes compression and keeps the bolt night tight against the thread, and it won't come loose! Just don't tighten it all the way down or you won't be able to "spread your wings" (you're welcome) :P
Y’all are cosplaying hawks while I’m trying to make an elytra
I need this for my old hallows eve costume. I’m gonna be god Castiel from spn.
Dean winchester is my favorite.
FINALLY another spn fan!!!!!😄😄😄😄
that’s so amazing oh my lord 🥺😂
Thats what I'm going to do
Me too, me too.
same! But idk if I want the feathers to be Black, white or rainbow 🥲 I'm thinking iridescent could work but idk
Everyone cosplaying as hawks but then there is me who wants the wings for Scott the ruler of Rivendell.
Everyone: I'm using this for a hawks cosplay!
Me who just wants to make a Philza Minecraft cosplay: I feel out of place here
Unlike some people I’m not cosplaying hawks or Philza, but this will definitely come in handy for my ren faire outfit for next year!
Everyone out here watching it to cosplay hawks:
Me: *princess celestia cosplay*
How to assemble the hinge with the bolts and nuts helped me make my fairy wings that mover from a closed/down position to a open/up position!
Will be using this for my Grian cosplay! Thx for the tutorial! (:
Y'all out here making hawks cosplays but I'm here because I need to make a Husker from Hazbin hotel cosplay :3
dont forget about the cheep booz
I'm working on a Alastor cosplay rn what a coincidence
Genius
i’m here just because i want wings
im here for philza minecraft
Thx for this, need it for my Crowley cosplay :]
What are the dimensions that you used? I'm going for Crowley as well.
@@bunnyxielian still working on it, I'll get back to ya with it :] but good to know I'm not the only one XD
@@Hierophant4848 thank you! Good luck
@@bunnyxielian when I'm done ill make a Google doc with pictures and stuff for ya :]
As well as how I decorated them
@@Hierophant4848 you are the best!!! Thank you
Thanks for the tutorial! I'm hoping to go for a Dark Fey (From Maleficent) So hopefully it will turn out good :>
You philza and hawks cosplayers. Silly funky guys. I'm cosplaying MY OWN CHARACTER.
Same!
My followers chose hawks as my next cosplay n this video helps so much but I’m still dreading it
Ok now how do you I put the feathers on? Can you make a video about that?
Would love to see how you attach feathers to these wings and what materials you suggest using. Thank you!
Hot glue
Put fabric on both sides of each wing, sew together, and use hot glue for putting the feathers on fabric or sew feathers on.
@@serena3170 hi! I was hoping someone would help with this! Thank you!
I just have one more question: what mind of fabric should i use, and should it be loosely sewn on for movement?
@@venom.strike6999 Hi! I'm so happy to help, personally I just used an old white sheet because mine were angel themed, really anything is ok, I do suggest something lighter though especially if you attach the feathers how I did in the end. A lot of the process for me was pinning and repinning to see where I needed to sew so that the wings would move. For most of the wings there was only a centimeter or so of space between the wood and the stitching. For the feathers, (this is a lot of work but I loved how it turned out for my purposes) you can get fake feathers and use a needle with thread on it to go straight through the shaft, then going down into the fabric and back up again to repeat the process, (almost as if you were sewing a bead into fabric) making for a fairly clean and unnoticeable attachment.
@@venom.strike6999 I hope that helped! I know its long but I just wanted to explain it thoroughly enough that it was clear.
😍When you are looking for Halloween costumes for your daughter and PARTS AND CRAFTS in Somerville has the best tutorial!!!! Yay!
I’m not here to cosplay hawks, I’m here to cosplay Ph1lza Minecraft 😎✨
Same 👌
Me too
I’m tryna do a DreamXD cosplay and I was like “oh yeah wings would be cool” so here I am.
YOOOOOOOOOOOOOOOOOOOO
Omg finally someone that made this easy to do
I love the way she explains it, I want u to add some feathers to it and that's make it as a real project
I am making harpy eda so this is super helpful!
Will you do a video on how to decorate the frame?
How would you go about decorating them?
Perfect this is just what I needed for my cosplay I was thinking to cosplay female version of hawks ;)
Hi im a therian (black wolf, black labrador ,black mustang and lutra otter) but im also therkin my kin type is a hippogriff so this helped thankyou
Awesome video!
Is there some way I could make an apparatus to keep the wings open or closed whenever I want?
I think string that you can pull is your best option for being able to move them without having to touch the actual wood itself.
me, who takes Halloween like cosplaying and wants to make my oc: thank you for this information, you have saved me copious amount of money
Thanks I’m making this for a dragon costume I really hope it works
For the people Cosplaying Hawks, I'm here for Angel Devil xD
How do u add the feather parts
Cameron Longknife add a piece of fabric and glue the feathers starting from bottom to top :)
😮❤very good idea and easy method shown your lovely post thanks of all.
You mentioned that these where sized for a kid. To make them adult size would I simply lengthen the pieces while keeping the hole patterns the same ?? That all I need to know the rest was great and I love them thanks
I just scaled them to 150% and they had the perfect size for an adult.
@@galaquenand how would one do tjat
I need this to make wings for a Philza cosplay
I’d like to know how thick the wood is and how what the demensions are
I would also like to know how thick the wood is in the dimensions because I'm currently trying to make these wings but I'm not sure what wood I should use.
This was so helpful! I love this idea and how simple you made it seem to make it, and I'll definitely be considering using your video to make part of the halloween costume I (hopefully) will be able to pull off :)
Hello, I would appreciate knowing how to make the design of the wings and add them to the wood, I am not sure how to put the feathers so that when moving the wings it looks good and how to make one move the wings at will, thanks
I couldn't access the link. To this project. What are the measurements and sizes if the boards??
As an Endeavor Cosplayer I wanna make the fire wings !!!
Making these for a Halloween costume / original character cosplay, very excited!
hawks cosplayers in the comments section be like 👁️👄👁️
this is the best tutorial, I tell you. THANK YOU SO MUCH.
Hey , just wondering . What are the measurements for adult wings and also, can the wings fold completely down ?
I’m gonna be going as Grian from hermit craft for Halloween, I just need to make the wings and buy the wig so yeah!!
*frantically trying to make philza wings*
Late, but saaaame
thank you for making a very coherent wing tutorial for a newb like me, but i would have loved to see them feathered
I looked this up because I’m doing a Hawks inspired cosplay but a female version 😂
Perfect! Thanks for showing me!
I'm gonna use this for my hawks cosplay (he s from bnha)
Same! I really want to cosplay him, and I'm also the same height as him! :D
How wide are the pieces
Tank's for you tech me...I always lernd about that..to make wings (tutorial )..terima kasih from me In Indonesia..Tuhan Yesus kristus memberkatimu...amin..!
What is the Length of the woods
Am I the only one is 2024? qwq
No?
Yes
i found using short wood rulers and long wood rulers work well
I going to to be a fox with wings in Halloween
roxy glitter fox you described my oc with one sentence
Finally I'm finally able to cosplay as my OC bunzzy she has black and white hair she absolutely loves bunnies and she also has black wings it's amazing thank you so much for this very easy steps I'm going to ask my dad if he can help me but thank you so much I love this channel:) ❤️❤️👌👌👍👍😊😊
Out of curiosity, what are you guys making these wings for?i want to see how many people are also making Hawks 😂
Update 8 months later:
I still haven't made them 💀 💀 💀
You can use Locktight for the bolts and nuts
you need to be more specific with the measurements
Also maybe put it in cm as well
Thank you so much
I want to make the wings of Spider-Man's villain
Okay now I just need someone to explain how to connect them to elastic and how to move them without holding them
lmao same here guys
Finna be a vampire bat, hell yeah
This is going to make my Hawks cosplay so much better!!!!
I literally went through dozens of video for an efficient pair of wings,🥵 already bought the materials today, now I just pray 🙏 and hope your design works as shown cause I got a film to shoot this Saturday with it. 🙄
Thank you so much sister, its 100% working 🥰😊👍, just took a little longer than usual to scale it up. ❤
Omg tysm I can’t wait to cosplay philza for halloween
I really wanna make a Hawks cosplay, but my dad isn't the construction type so I know he doesn't own any of the things shown here aside from (maybe) some nuts and bolts. Is there a way I can make this using cardboard?
You can use nylon lock nuts in place of the hot glue.
What are the dimensions for the wood? I know its 20 inches long but whats thr width and depth
Did u find out?
I love how everyone is Watching this so they can be hawks
I haven’t tested this out, but I think that if you make the two sides separately and put them on a base and string the top or bottom of each side, you can make them work separately. So like a string on either the top or bottom point of the diamond once they’re apart, then add like a ring or tube to hold the string in place that is attached to the base, so when you pull the string the wings extend. Or you could keep the two together and do the same so that way you could open and close them without having to do it manually. It’s a bit hard to put into words and will need a base for it and way more effort, but in case some wants this, I’ve been thinking about it for a while. All in theory but ima update this if it does or doesn’t work.
I needed this for my Hawks cosplay... thanks :)