Fun Fact: Do You Know That The First Spirit Halloween Animatronic Was The Life-size Animated Witch That was sold during Halloween of 1994. She would tell jokes and laugh
Ya, although it doesnt really look bad like this, if anything it makes more sense because it looks like his arms is what's making him jump out of the ground
Let me tell you. People like you, you guys repair things way better than I can. And I’m proud of you. But me, personally I cannot repair anything. Due to the fact that I tried repairing a light saver and it was a success, a skateboarding Santa that was a success but the leg got squished if I could be wrong, A voice changer that a friend of mine from buddy baseball got me as a gift, but the wire for the speaker came off, a little toy car that says it’s got serious power, due to the fact that the foreword pad on the inside was taken off, luckily it was inside the toy. and other things that were not and that were success. How can a blind person like me repair toys without breaking them? because I am trying to wonder the answer to that. And also, because of that some things were a success, and others were not a success for me.
Love and respect your knowledge sir! For years I have been looking for some guidance on how to address the wire situations these props can develope.One in particular is the 2011 Exorcist Regan.Ive had two wires come loose and have no idea where they go.Any help would be greatly appreciated!
Ya, depends on what the issues are, gears are always a pain because you gotta disassemble the whole entire thing, same with motors, and you have to have the exact replicas as replacements which most the time you can unless you have animatronics that you use just for parts. belts and wires are always the easiest
Hi! I see you have the limb eating zombie boy! I just picked one up and some wires need repaired. I cannot see where the green and yellow one are supposed to attach. Do you have or can take a picture? I can't find details for this online. Thanks!
Hi, what function is not working? head turning, light up eyes, or moving mouth? All those typically pull off with the head bending movement because the wires are to short, they usually break in half, so you should find half the wire in the lower half and the other half in the head.
@@jobeanvideos Thanks for the quick reply! The head moves up and down and the eyes light up. However, the head does not turn side to side, nor does the mouth move. Currently three pairs of wires look broken in half. Red/black and lavender/orange, I can find the other side that needs to reconnected. But the yellow/green pair is broken like the other two sets, but I can't find where it should go! Any thoughts?
@@jobeanvideos After looking a bit more closely, I'm guessing the other side of that connection is in the head. Any tips for removing his head? I removed some screws, but it didn't budge! Thanks for the videos--glad I'm not alone in trying to repair these things!
@@yogamare I think you just have to try to undo the glue holding the mask on so you can slip it up more to see. It's been awhile sense I went in the head, they just happened to come off again over the years
@@jobeanvideos I figured it out tonight, thanks to your video! Looks like green wire doesn't go anywhere. I connected the other two sets, and it's back in business. In all its chewing glory. Thanks so much! Happy Halloween 🎃
It has a board issues for the sensors, he only activates when you turn it off and on, head doesnt shake, and not as loud as it should be, theres no volume, this one I'm getting works perfectly and even stands at the full 5 feet, my first one slips down a lot.
@@My2ndchannel786 ya lol, until I get the downloadable chip into it and give it ghastly gentleman's phrases, so it will have the ability to be both props lol
Fun Fact: Do You Know That The First Spirit Halloween Animatronic Was The Life-size Animated Witch That was sold during Halloween of 1994. She would tell jokes and laugh
Esmeralda the witch!
Jumping zombie’s hands needs to be back looking forward
Ya, although it doesnt really look bad like this, if anything it makes more sense because it looks like his arms is what's making him jump out of the ground
Yay! Rosemary is getting repaired!
Cool video Jobeanvideos
Shut up
Halloween is coming fast and my birthday is on October 21st and ya did you know that props face is based on a horror game called slendytubbies
That game took it not gemmy
Ghastly groom was made in 2008 and the game was made in 2012
Omg yess!! he's a really cool animatronic! -- Btw I have a question, where can I get a replacement part for the broken spine girl upper torso
I have a gemmy Spirit ball Skellington, but it’s missing parts because it stopped working in the middle of Halloween
Let me tell you. People like you, you guys repair things way better than I can. And I’m proud of you. But me, personally I cannot repair anything. Due to the fact that I tried repairing a light saver and it was a success, a skateboarding Santa that was a success but the leg got squished if I could be wrong, A voice changer that a friend of mine from buddy baseball got me as a gift, but the wire for the speaker came off, a little toy car that says it’s got serious power, due to the fact that the foreword pad on the inside was taken off, luckily it was inside the toy. and other things that were not and that were success. How can a blind person like me repair toys without breaking them? because I am trying to wonder the answer to that. And also, because of that some things were a success, and others were not a success for me.
Love and respect your knowledge sir! For years I have been looking for some guidance on how to address the wire situations these props can develope.One in particular is the 2011 Exorcist Regan.Ive had two wires come loose and have no idea where they go.Any help would be greatly appreciated!
Hey boss got a photo of those 2 wires your talking about ??
How do I make my jumping spider jump up as soon as it’s activated ?
I dont think you can really, it's all about the speed of the motor and the gear torque
is it dificult fixing animatronics?
Some more than others
Ya, depends on what the issues are, gears are always a pain because you gotta disassemble the whole entire thing, same with motors, and you have to have the exact replicas as replacements which most the time you can unless you have animatronics that you use just for parts. belts and wires are always the easiest
Can you please upload a fixing peak a boo penny video 🙏
hey so I heard a little about you ordering new parts from tekky toys and i was wondering how you do
I havent in a long time, they rarely ever respond, but typically you can email or call them and ask if they have certain parts that you need.
@@jobeanvideos do u think they have older prop bases because my howler base shattered and I was wondering if I have the smallest chance at fixing him
@@Goulishlygoodtimes that I know they wouldnt have.
Hi! I see you have the limb eating zombie boy! I just picked one up and some wires need repaired. I cannot see where the green and yellow one are supposed to attach. Do you have or can take a picture? I can't find details for this online. Thanks!
Hi, what function is not working? head turning, light up eyes, or moving mouth? All those typically pull off with the head bending movement because the wires are to short, they usually break in half, so you should find half the wire in the lower half and the other half in the head.
@@jobeanvideos Thanks for the quick reply! The head moves up and down and the eyes light up. However, the head does not turn side to side, nor does the mouth move. Currently three pairs of wires look broken in half. Red/black and lavender/orange, I can find the other side that needs to reconnected. But the yellow/green pair is broken like the other two sets, but I can't find where it should go! Any thoughts?
@@jobeanvideos After looking a bit more closely, I'm guessing the other side of that connection is in the head. Any tips for removing his head? I removed some screws, but it didn't budge! Thanks for the videos--glad I'm not alone in trying to repair these things!
@@yogamare I think you just have to try to undo the glue holding the mask on so you can slip it up more to see. It's been awhile sense I went in the head, they just happened to come off again over the years
@@jobeanvideos I figured it out tonight, thanks to your video! Looks like green wire doesn't go anywhere. I connected the other two sets, and it's back in business. In all its chewing glory. Thanks so much! Happy Halloween 🎃
What happened to your other ghastly groom
It has a board issues for the sensors, he only activates when you turn it off and on, head doesnt shake, and not as loud as it should be, theres no volume, this one I'm getting works perfectly and even stands at the full 5 feet, my first one slips down a lot.
I wonder what their gonna sound like together when you get your second one "WeLcOmE tO ArE WeDdInG PaRtY I'm HaPpY To MaRrY HeR"
What's wrong with your original ghastly groom
Board issues for sensors, no shaking head, diesntsnt stand up all the way, and not as loud as it should be. So pretty much everything is wrong with it
R.i.P Jordan's Ghasty groom 2022-2022
@@My2ndchannel786 ya lol, until I get the downloadable chip into it and give it ghastly gentleman's phrases, so it will have the ability to be both props lol