Even as a photographer/videographer it’s always good to go back to the basics and remind ourselves that the foundations of media are the same in most equipment. Well done brother.
Just got my first gopro and I am using it to record diecast racing. This is done with low light on my track for a outer space look. I spent 8 to 10 hours playing with setting as I am new to videos and editing ect. And still could not get gopro video to look good. I watched your video and it fixed all my problems. Thank you for taking the time to make this. I really appreciate it. And now I can use my go pro on my next race video.
Damn finally someone explained my mystery ;)about this you - called "compression artefacts" especially visible when you recording bushes trees etc.Thank you.
Any one know how to up load to you tube in 4K. I don’t think o have seen this option. Does this also mean that you can still record in a lower resolution say 2.7k yet still upload in 4K?
@@mrmagoo600 IF your clip is in 4k resolution you upload it like other else files. First of all YT prepare this movie in small res, like 720p than 1080p and for 1440p and 4k sometimes you need to wait even 24h. It is not insta after upload.
The same problem I have, on my computer screen, looks great, but on youtube the clips where the image is covered by trees looks far worst than open environment clips! It's a shame it can't be fixed!
Do we need to record in 5k then upload on RUclips 4k or we need to record in 4k? I have problem with grainy videos will try out shutter and flat color method
Great VIdeo. It's good to remind ourselves that Light is such a massive component in videos and photos. Its a basic obvious thing, but we so often forget, in the end we are capturing light.
I love the fact that you stay you can't always get the best shot with GoPro. Most people say change this change this and you can make it look good. But you say sometimes you can't get it with the GoPro. I love the honesty Great video
Hi, I am new Go Pro User. I have been a photographer for 40 years and I bought a new Go Pro Hero 11 Black after much deliberation of competitive brands of action cameras. From most of reviews I watched, it seems that it does a fairly good job as an action camera. So far in the 2 months that I have trialed and errored this camera, it is as you say. I have watched dozens of videos on how to set this camera. I find it absolutely useless in any low light conditions, indoors or out. So far even on the brightest days in full sunlight, shooting from tripod, adjusting different settings my video quality is not 100%. I started to believe it was me. It is like the camera is always out of focus. Thanks for confirming what I suspected about its sensor. I have been enjoying your channel and am now a subscriber, thanks for your advice and I will continue to tinker with it, if it is possible to get better, or send it back, great work. Thanks
Ah, that demystifies the artifacts I’m often getting in my video’s when I’m vlogging a forrest environment. It seems like the youtube compression is not very kind on shots with lots of green leafs in it.
Filming frustrates me because it’s not my area of expertise. Videos have been way too dark from the GoPro so I am going to adjust some of the settings you mentioned. Im outside with a tripod so I don’t see why I couldn’t fix this
Thank you for all of your insight. You really do a great job explaining to someone. You are articulate and precise. It's really good to know people like you!
Very good breakdown of the key factors that many other videos did not mention. Very helpful for my upcoming videos using the GoPro. Thanks for making this video!
Thanks my friend i was about to sell my gopro because i was frustrated with grainy videos. ISO and Shutter did the magic. However the lowest ISO in Hero 5 black is 400 but thats manageable. But in indoor lighting conditions the video flickers
Thank you! Very introspective and useful video! Your way of explaining and the precision is clearly the proof of your experience and understanding of how gopros and photography and videography are all about! I have subscribed and enabled notifications! Keep up the good work and keep posting.
Very good Video! And you are totaly right, the GoPro is an awesome Actioncam, but only when there is much light available. In LowLight Conditions it sucks. So i really hope that the GoPro 10 will have a better/bigger sensor installed so that we can have better lowlight recordings. 5K60FPS and 4K120FPS, also in SuperView Mode would be also awesome! GoPro should really focus on improving lowlight for the Hero10!
Thanks for the information. You helped solve my problem of overexposure. I googled but many forums has explained it over-complicatedly. Following your guidance, I can tackle the situation now.
Once you lock exposure, I'm finding I then cannot change the shutter speed. Only once exposure is unlocked do I get the option to change shutter speed again. This is a little frustrating because in super bright conditions I want to lock exposure to a darker area (e.g., a tree or grass), but then you're locked out of shutter speed changes.
Hi, what settings would you recommend for night lapse photo mode for filming stars? I've been using 30 second exposure with Auto intervals but haven't experimented with protune. The footage has been good and i'm wondering if it could be better, thanks.
I have been fighting to figure out a way to get my Hero9 Black to take good in car video. I have the GoPro on my rollbar aimed to record the view in the windshield as well as me and my hand on the steering wheel and shifter. I rarely, occasionally am abnle to get it to record a proper video. But most of the time the glare and sunlight turns everyhthing in the windshield portion of the video to a blinding brightness with little to none of the view visible. It is irritating because you don't know if it worked until after your done and home from a race and can't redo the video. And it dosn't help that GoPro is realistically te only action camera around.
I take it a photo now with my gopro hero 9 the photo is good at resolution but the qualty is so blurry the pixels are not sharp they look exploded blurry pixels why
Thank you for this video. I just recently purchased a GoPro Hero 8, and was dismayed by how bad my videos looked on my 1440p monitor and 4K TV. Having watched this video however, I'm ready to go out on a hike and fiddle with a few of these settings to see what gets me the best image quality. I especially appreciate the note about 180-degree rule!
A useful video, thanks for sharing. I'm currently in discussion with GoPro about the quality of video from my GP Max. It looks much less sharp in 1080p than either my mobile phone's camera or my Canon Legria in 1080p. Still trying to resolve this but very disappointing for an action cam that cost £500.
Yeah man, EXACTLY! I just got my Gopro today, and I must say that the video quality looks pretty garbage for something so expensive. I'm trying to fix it and I hope I do.
I recorded video outdoors with the factory standard 1080p 60fps setting of my Hero 8 and back at home after copying the recorded files over to my computer I was a bit shocked how dark the footage was although I shot the video outdoors in daylight. Much too dark. I hope I get some answers in this video.
I have the hero 9 black and noticed during playback the color warmth gets orangey at certain times when recording in 4K 60 fps using gopro color. Anybody had this problem?
I am youtuber and have started offroading on my ktm now. Just got a gopro hero 9. Before this I was using a gopro hero 5, always shot at 2.7K 30fps which was fine on roads and highways, gives a nice cinematic motion blurr too. However when I started offroading 30fps didn't seem to capture enough details about the stones, potholes, cracks on the ground, leaves, etc. As the latest was 9, I got 1. Started shooting at 2.7k 60fps which works completely (got some new highspeed micro sds too). But the files size is very huge + my good pc with nice configuration struggles to edit. Videos uploaded on youtube look nice in 1440p. Crisp! But the file size and hassle! So I chose to start shooting at 1080p 60fps. Footages look good in the pc, not as detailed but good enough. However youtube just kills it when its at 1080p. Was looking for a solution or workaround throughout and finally some one explained it logically here. Thanks for the video mate! And glad to know that its gopro + RUclips compression killing the video. Crazy! Can't do anything though. Will keep trying to bring the details out a little better with color profile updates, color grading, switching to wide view (super view kills the action happening in the front), etc. Still hoping for it to get better because this freaking hero9 wasn't cheap 😅 Thanks again! Cheers! Stay safe...
Hi. This is a really great channel (one of the best!). The problem I have always had with my GoPros (7,8, 9, and 10) is shimmering and flickering (Aliasing?). And I've never been able to solve it - I was hoping it would go away with the GoPro 10 - but not! This normally happens with straight or repeated edges (such a tiles on house roofs, fences) but is also common with vegetation and certain ground surfaces (e.g gravel). It tends to be more pronounced on duller days but I've also had it in good sunlight. The issue is there with videos straight from the camera and also after processing. I tend to shoot in 4K/ 25fps and use linear + HL. ISO is set to 100 to 400. WB on Auto. Sharpness on Medium. Shutter at 1/100. Is there anything i'm doing completely wrong? Thanks for any advice you may have. Best wishes. Mark
I’m having some issues with mine. I just got it and trying to figure it out. But when I plug it into the pc. A lot of them aren’t coming up as videos but files instead. And they are so blurry and pixelated. But some of them come up as clear as day. Why am I having this problem?
Im a new go pro user and lately my footage is very laggy and choppy with the shutter speed on auto. what do you suggest to fix it? may my MacBook is out dated as well.
Dude I have the same problem! Laggy is the word! It runs like a charm, but then its laggy for a sec, so visible and annoying... Did you fix the problem, and if yes, how?
Hi I'm from Indonesia. I still don't understand with go pro 10 it's new one. Why when I use take footage from motorbike so shaking footage and also for my surfing footage is shaking. What I should do ? Can you help me ??
Even after this video I am confused. I think the key is to test things for yourself. I have a mountain bike channel. I'd love some feedback. Right now I use 4k sometimes and 2k others
Thanks you, quite informative. Bro there is an issue with voice recordings with gopro hero 8 black, whenever i record video the sound level it records is very low, what to do ?
Bro Plzzz upload a video (how to export the gopro footage with high quality and low size or how compress into low size without lose the quality) Plzzzzzzz I hope 🙏
I;m having issues on my hero black 5 with heaps of noise and just general low resolution looking image even when shooting at 4k even with the iso set to 400, this is with inside shots but it looks more like a 480p camcorder than a hd camera.
yeah, as for me, this video quality of graininess and artifacts seems to be more apparent in Hero 9 than in Hero 8. I'm pretty close to returning my Hero 9 at this point because of this graininess.
I just using my new gopro 10 for over a week and really dissapointed in those dark videos looks like I did huge mistake buying it as my Osmo action 1 has much more brighter image without over exposing it and looks like everytime will be sitting on computer and correcting videos. The question I would ask from gopro is what if some if not many not interesting spending a lot of time for editing? or maybe some people doesn't have computers powerful enough for editing?
Thanks for this. Great video and explanation. I’m very disappointed in my Hero8. I shoot videos in a lead follow situation for a car channel. I have loads of compression artifacts. The quality is terrible. I was hoping GoPro had improved, the image quality is still complete garbage.
Why is my footage jittery as I move the camera around the room? If I am using 1080 30fps and 2.7k and 30fps. But if I’m using 4K 60fps it goes away. Also I’m on stabilizing on. But not boost. My go pro hero 4 doesn’t do this. Please any help is great.
please help. im recording 30 fps gp hero 7 black 2.7k. got new computer dell ultra hd 27in monitor Alienware r12 32 gig ram 2060 super. is it normal when to see trees or the edges of things seem to shutter back and forth almost like vibrating when panning side to side. any fast movement makes it almost flicker. i can see it in other peoples videos. just wondering what causes it. looks fine in 60 fps.
Forgive me if you already answered this, but can you tell me what camera and settings you used for your introduction to this video? The quality was absolutely perfect.
Amazing video. I just have 1 question, So if i record in a bright ish day, Surfing or Paddleboarding, I should use the Flat color option not the GoPro one, correct? The GoPro color option works more for darker lights?
I just bought a GoPro 12 and I love it but I have noticed that sometimes on certain skin tones things look a bit over sharpened and you can see a lot of blemishes on people’s skin, almost looks too sharp. If I’m just shooting scenery, everything looks gorgeous but when I’m shooting people or interviewing people, their skin looks a little sharp or even artifacts a bit. What do you suggest for better results?
Yes, true - GoPro adds a lot of clarity to the image - You could reduce the sharpness at least to medium or try to shoot in Log - but when shooting in log you'll have to edit each shot in post
Thanks for video! I have a very strong computer and I can process 4K/60 video from DJI Mini 2 without any problems and the video is absolutely fluid, but the same resolution from GoPro 9 (so 4K/60) is still laggy. I record manual, shutter speed 60, 4K/30, 5500K, ISO100 (maximum also 100), Flat color, medium sharpness. Video compression has no effect, so the same thing happens no matter what compression I use ... Can you please give me some advice to solve this problem?
Servus! Good video! What do you recommend do film moving vehicles with led lights? Typically they flicker in my videos. I am a beginner and am trying to improve myself.
The flickering is caused by the wrong shutter speed - try to use a low frame rate or to set the shutter speed manually - there is also an anti-flicker setting - set it to 50hz if you live in the pal region
when I shoot landscape GoPro look ok. When I shoot portraits with ND, CPL, or without ND, auto and manual setup. The skin tone looks terrible has so much graining noise and blur. Lool like a s**t. The same weather I shoot with my Fujifilm camera. skin tone video looks beautiful and amazing.
![[TF2] The Russian Bear Trap](http://i.ytimg.com/vi/YFNSwz2_rOA/mqdefault.jpg)
Even as a photographer/videographer it’s always good to go back to the basics and remind ourselves that the foundations of media are the same in most equipment. Well done brother.
Thx Sean!
Thank you. This was an exceptional explanation! Changing my GoPro settings now
Same here
I'm a new GoPro user, and your videos are very helpful to me. Thank you much.
Just got my first gopro and I am using it to record diecast racing. This is done with low light on my track for a outer space look. I spent 8 to 10 hours playing with setting as I am new to videos and editing ect. And still could not get gopro video to look good. I watched your video and it fixed all my problems. Thank you for taking the time to make this. I really appreciate it. And now I can use my go pro on my next race video.
Thx for your feedback!
great tips! People are amazed to find out I shot an entire show using only GoPros
Damn finally someone explained my mystery ;)about this you - called "compression artefacts" especially visible when you recording bushes trees etc.Thank you.
word . . . so we should always upload to RUclips in 4k?? . . I didn't know you could change it lol . . somewhat new . . watch my trash 😜
Any one know how to up load to you tube in 4K. I don’t think o have seen this option. Does this also mean that you can still record in a lower resolution say 2.7k yet still upload in 4K?
@@mrmagoo600 IF your clip is in 4k resolution you upload it like other else files. First of all YT prepare this movie in small res, like 720p than 1080p and for 1440p and 4k sometimes you need to wait even 24h. It is not insta after upload.
The same problem I have, on my computer screen, looks great, but on youtube the clips where the image is covered by trees looks far worst than open environment clips! It's a shame it can't be fixed!
Do we need to record in 5k then upload on RUclips 4k or we need to record in 4k?
I have problem with grainy videos will try out shutter and flat color method
Great VIdeo. It's good to remind ourselves that Light is such a massive component in videos and photos. Its a basic obvious thing, but we so often forget, in the end we are capturing light.
Thx mate
I love the fact that you stay you can't always get the best shot with GoPro. Most people say change this change this and you can make it look good. But you say sometimes you can't get it with the GoPro. I love the honesty Great video
Thx Fred!
Hi, I am new Go Pro User. I have been a photographer for 40 years and I bought a new Go Pro Hero 11 Black after much deliberation of competitive brands of action cameras. From most of reviews I watched, it seems that it does a fairly good job as an action camera. So far in the 2 months that I have trialed and errored this camera, it is as you say. I have watched dozens of videos on how to set this camera. I find it absolutely useless in any low light conditions, indoors or out. So far even on the brightest days in full sunlight, shooting from tripod, adjusting different settings my video quality is not 100%. I started to believe it was me. It is like the camera is always out of focus. Thanks for confirming what I suspected about its sensor. I have been enjoying your channel and am now a subscriber, thanks for your advice and I will continue to tinker with it, if it is possible to get better, or send it back, great work. Thanks
Ah, that demystifies the artifacts I’m often getting in my video’s when I’m vlogging a forrest environment. It seems like the youtube compression is not very kind on shots with lots of green leafs in it.
I have been genuinely disturbed by how many reviews I’ve seen of action cams where people just seem to ignore the horrible artifacting 😊
Thanks Werner, I'm looking forward to trying these GoPro advanced settings when I visit Val Gardenia this June!
Excellent Video: Clear and to the point !!! Thank you
Filming frustrates me because it’s not my area of expertise. Videos have been way too dark from the GoPro so I am going to adjust some of the settings you mentioned. Im outside with a tripod so I don’t see why I couldn’t fix this
Excellent video! Thanks for braking it down in a way that’s easy to follow.
Thx Alex
The best video for GoPro 8-9 image quality improvement, thanks mate you saved my project!
Thank you Werner, very helpful!
Thank you for all of your insight. You really do a great job explaining to someone. You are articulate and precise. It's really good to know people like you!
Thx Rick!
Well-made video, thank you for all the tips
Very good breakdown of the key factors that many other videos did not mention. Very helpful for my upcoming videos using the GoPro. Thanks for making this video!
Very well explained video with helpful information, thank you!
Thanks my friend i was about to sell my gopro because i was frustrated with grainy videos. ISO and Shutter did the magic. However the lowest ISO in Hero 5 black is 400 but thats manageable. But in indoor lighting conditions the video flickers
Thank you! Very introspective and useful video! Your way of explaining and the precision is clearly the proof of your experience and understanding of how gopros and photography and videography are all about! I have subscribed and enabled notifications! Keep up the good work and keep posting.
Thx Robert!
Thank you so much. Solved everything i need to know about this camera, and setup!
Thank so much! Getting heaps of noise on my GoPro7 and since I'm a complete noob, I really needed to hear this info!
Subscribed! You talk like a Jedi master and I dig it!
Very good Video! And you are totaly right, the GoPro is an awesome Actioncam, but only when there is much light available. In LowLight Conditions it sucks. So i really hope that the GoPro 10 will have a better/bigger sensor installed so that we can have better lowlight recordings. 5K60FPS and 4K120FPS, also in SuperView Mode would be also awesome!
GoPro should really focus on improving lowlight for the Hero10!
You perfectly describe my whole problems which i have using gopro. Very useful tutorial. Thank You !!!!!!
Thanks for the information. You helped solve my problem of overexposure. I googled but many forums has explained it over-complicatedly. Following your guidance, I can tackle the situation now.
Thx Horace!
This was so helpful! Thank you so much!
Once you lock exposure, I'm finding I then cannot change the shutter speed. Only once exposure is unlocked do I get the option to change shutter speed again. This is a little frustrating because in super bright conditions I want to lock exposure to a darker area (e.g., a tree or grass), but then you're locked out of shutter speed changes.
Very well explained, thank you!
Really helpful, its just that I dont know how to access any of these settings like iso, etc.
Hi, what settings would you recommend for night lapse photo mode for filming stars? I've been using 30 second exposure with Auto intervals but haven't experimented with protune. The footage has been good and i'm wondering if it could be better, thanks.
Holy *hit!!! My GoPro went from looks like crap to wooooooooow! Thank you, man, you are the king!!!
Bought a hero 9 and the video noise is very bad... Understood the ISO and Shutter tips, many thanks!!
I have been fighting to figure out a way to get my Hero9 Black to take good in car video. I have the GoPro on my rollbar aimed to record the view in the windshield as well as me and my hand on the steering wheel and shifter. I rarely, occasionally am abnle to get it to record a proper video. But most of the time the glare and sunlight turns everyhthing in the windshield portion of the video to a blinding brightness with little to none of the view visible. It is irritating because you don't know if it worked until after your done and home from a race and can't redo the video. And it dosn't help that GoPro is realistically te only action camera around.
you only one , i understand everything from him , Really thank you , So Simple < So Useful
I take it a photo now with my gopro hero 9 the photo is good at resolution but the qualty is so blurry the pixels are not sharp they look exploded blurry pixels why
How do You get to the video setting’s on the GoPro 8 black?
My issue is everything look FAR away and small. Tree leaf shadow is very dark
Excellent expertise. All the issues I was trying to solve were solved in this one video :)
You have a new subscriber. I checked out your other video about Sony picture profiles and it was easily one of the best explanations I’ve found.
Thx and cheers from Italy!
Thank you for this video. I just recently purchased a GoPro Hero 8, and was dismayed by how bad my videos looked on my 1440p monitor and 4K TV. Having watched this video however, I'm ready to go out on a hike and fiddle with a few of these settings to see what gets me the best image quality. I especially appreciate the note about 180-degree rule!
Any updates with the new settings?
@@DaCleva1 I'm also curious
Awesome tips! thanks man !!!
Thanks my guy. Lots of info here
Sir, Very informative! Huge thanks ⛷️⛷️⛷️
A useful video, thanks for sharing.
I'm currently in discussion with GoPro about the quality of video from my GP Max. It looks much less sharp in 1080p than either my mobile phone's camera or my Canon Legria in 1080p. Still trying to resolve this but very disappointing for an action cam that cost £500.
Yeah man, EXACTLY! I just got my Gopro today, and I must say that the video quality looks pretty garbage for something so expensive. I'm trying to fix it and I hope I do.
I recorded video outdoors with the factory standard 1080p 60fps setting of my Hero 8 and back at home after copying the recorded files over to my computer I was a bit shocked how dark the footage was although I shot the video outdoors in daylight. Much too dark. I hope I get some answers in this video.
I used my GoPro on my Disney cruise vacation now all the sudden the footage is black screen. Never had it been inserted into any computer. Plzzz help
I have the hero 9 black and noticed during playback the color warmth gets orangey at certain times when recording in 4K 60 fps using gopro color. Anybody had this problem?
I am youtuber and have started offroading on my ktm now. Just got a gopro hero 9. Before this I was using a gopro hero 5, always shot at 2.7K 30fps which was fine on roads and highways, gives a nice cinematic motion blurr too.
However when I started offroading 30fps didn't seem to capture enough details about the stones, potholes, cracks on the ground, leaves, etc. As the latest was 9, I got 1. Started shooting at 2.7k 60fps which works completely (got some new highspeed micro sds too). But the files size is very huge + my good pc with nice configuration struggles to edit. Videos uploaded on youtube look nice in 1440p. Crisp!
But the file size and hassle! So I chose to start shooting at 1080p 60fps. Footages look good in the pc, not as detailed but good enough. However youtube just kills it when its at 1080p.
Was looking for a solution or workaround throughout and finally some one explained it logically here.
Thanks for the video mate! And glad to know that its gopro + RUclips compression killing the video. Crazy!
Can't do anything though.
Will keep trying to bring the details out a little better with color profile updates, color grading, switching to wide view (super view kills the action happening in the front), etc.
Still hoping for it to get better because this freaking hero9 wasn't cheap 😅
Thanks again! Cheers! Stay safe...
Thx for your feedback mate!
Awesome video, thank you.
Thanks for your detailed review 👍👍
Hi. This is a really great channel (one of the best!). The problem I have always had with my GoPros (7,8, 9, and 10) is shimmering and flickering (Aliasing?). And I've never been able to solve it - I was hoping it would go away with the GoPro 10 - but not! This normally happens with straight or repeated edges (such a tiles on house roofs, fences) but is also common with vegetation and certain ground surfaces (e.g gravel). It tends to be more pronounced on duller days but I've also had it in good sunlight. The issue is there with videos straight from the camera and also after processing. I tend to shoot in 4K/ 25fps and use linear + HL. ISO is set to 100 to 400. WB on Auto. Sharpness on Medium. Shutter at 1/100. Is there anything i'm doing completely wrong? Thanks for any advice you may have. Best wishes. Mark
I’m having some issues with mine. I just got it and trying to figure it out. But when I plug it into the pc. A lot of them aren’t coming up as videos but files instead. And they are so blurry and pixelated. But some of them come up as clear as day. Why am I having this problem?
I closed my go pro as hard as I could and water got in. It is 3 yrs old but, I can’t afford another
Im a new go pro user and lately my footage is very laggy and choppy with the shutter speed on auto. what do you suggest to fix it? may my MacBook is out dated as well.
Dude I have the same problem! Laggy is the word! It runs like a charm, but then its laggy for a sec, so visible and annoying... Did you fix the problem, and if yes, how?
@@Paconovia yeah I found out my Mac was too old and outdated to handle 4k. Don't shoot in 4k if you have a older pc, just use 1080p.
Well thats another problem..my computer is rather new, like only 2 years old.. I watched some vids recomending converting so Ill try that out too
Awesome, thank you so much for explaining.
Thanks for the info.Im ready with my new cam to go on vacation.thanks again.
Hi I'm from Indonesia. I still don't understand with go pro 10 it's new one. Why when I use take footage from motorbike so shaking footage and also for my surfing footage is shaking. What I should do ? Can you help me ??
Even after this video I am confused. I think the key is to test things for yourself. I have a mountain bike channel. I'd love some feedback. Right now I use 4k sometimes and 2k others
Nice info.. my gopro footage looks really bad on youtube(((
All my gopro hero 10 4k looks. Like white lines around grass and fine details like anti aliasing.. Any ideas?
Thanks you, quite informative. Bro there is an issue with voice recordings with gopro hero 8 black, whenever i record video the sound level it records is very low, what to do ?
Outstanding. Very well explained sir.
Thx mate!
Bro Plzzz upload a video (how to export the gopro footage with high quality and low size or how compress into low size without lose the quality)
Plzzzzzzz
I hope 🙏
Hi, I am having problems getting rid of the top and bottom black borders on my gopro hero 8 black videos. Can you help?
I;m having issues on my hero black 5 with heaps of noise and just general low resolution looking image even when shooting at 4k even with the iso set to 400, this is with inside shots but it looks more like a 480p camcorder than a hd camera.
Great vídeo, alot of good information thank you. Love the last clip where you make the resume, the background clip is very well edit. Like and sub.
Thx mate!
Hey TheRIddler FVP🤜 what settings do you use for your fpv videos on iso and shutter?
Great videos too man, nice skills
great vid, thx!
yeah, as for me, this video quality of graininess and artifacts seems to be more apparent in Hero 9 than in Hero 8. I'm pretty close to returning my Hero 9 at this point because of this graininess.
Waa ! Clear as cristal, well done.
I just using my new gopro 10 for over a week and really dissapointed in those dark videos looks like I did huge mistake buying it as my Osmo action 1 has much more brighter image without over exposing it and looks like everytime will be sitting on computer and correcting videos.
The question I would ask from gopro is what if some if not many not interesting spending a lot of time for editing? or maybe some people doesn't have computers powerful enough for editing?
Thanks for this. Great video and explanation.
I’m very disappointed in my Hero8. I shoot videos in a lead follow situation for a car channel. I have loads of compression artifacts. The quality is terrible. I was hoping GoPro had improved, the image quality is still complete garbage.
Your videos are very helpfull thank you very much :)
Why is my footage jittery as I move the camera around the room? If I am using 1080 30fps and 2.7k and 30fps. But if I’m using 4K 60fps it goes away. Also I’m on stabilizing on. But not boost. My go pro hero 4 doesn’t do this. Please any help is great.
when I am filming and playing it skips and it jumpy
Thank you! About 4th problem, what should i do? I have GoPro7
that was very helpful. thank you
Ciao, complimenti per il video, io ho una gopro9 ed il problema che spesso mi si presenta è che un PAN risulti scattoso, come risolvere?
please help. im recording 30 fps gp hero 7 black 2.7k. got new computer dell ultra hd 27in monitor Alienware r12 32 gig ram 2060 super. is it normal when to see trees or the edges of things seem to shutter back and forth almost like vibrating when panning side to side. any fast movement makes it almost flicker. i can see it in other peoples videos. just wondering what causes it. looks fine in 60 fps.
Im considering to buy Gopro 9 and this video helps a lot !!!!
Forgive me if you already answered this, but can you tell me what camera and settings you used for your introduction to this video? The quality was absolutely perfect.
Hey Nick, this was shot on a Sony A6300 in 4K - you can find a link in the video description!
Amazing video. I just have 1 question, So if i record in a bright ish day, Surfing or Paddleboarding, I should use the Flat color option not the GoPro one, correct? The GoPro color option works more for darker lights?
Well it’s called DROPPING FRAMES when in low light or in not enough light.
I just bought a GoPro 12 and I love it but I have noticed that sometimes on certain skin tones things look a bit over sharpened and you can see a lot of blemishes on people’s skin, almost looks too sharp. If I’m just shooting scenery, everything looks gorgeous but when I’m shooting people or interviewing people, their skin looks a little sharp or even artifacts a bit. What do you suggest for better results?
Yes, true - GoPro adds a lot of clarity to the image - You could reduce the sharpness at least to medium or try to shoot in Log - but when shooting in log you'll have to edit each shot in post
What setting should I use for boring content?
Thank you so much ✨✨
Thank you so much
What is the best compression use to go pro uploading in youtube
Thanks for video!
I have a very strong computer and I can process 4K/60 video from DJI Mini 2 without any problems and the video is absolutely fluid, but the same resolution from GoPro 9 (so 4K/60) is still laggy. I record manual, shutter speed 60, 4K/30, 5500K, ISO100 (maximum also 100), Flat color, medium sharpness.
Video compression has no effect, so the same thing happens no matter what compression I use ...
Can you please give me some advice to solve this problem?
Servus! Good video! What do you recommend do film moving vehicles with led lights? Typically they flicker in my videos. I am a beginner and am trying to improve myself.
The flickering is caused by the wrong shutter speed - try to use a low frame rate or to set the shutter speed manually - there is also an anti-flicker setting - set it to 50hz if you live in the pal region
@@MountMediaChannel Thank you for the response. I will try it out and see what works best.
when I shoot landscape GoPro look ok. When I shoot portraits with ND, CPL, or without ND, auto and manual setup. The skin tone looks terrible has so much graining noise and blur. Lool like a s**t. The same weather I shoot with my Fujifilm camera. skin tone video looks beautiful and amazing.
You are very helpful.
Great summary, thanks for the video! Question: any recommendations for filming under/above(alternating) water (ocean)?
Thanks!
Under water I would prefer a frame rate of 30fps - it simply looks more fluid than 24fps
@@MountMediaChannel Thank you!
italian alps - also Südtiroler :-)
cooles Video - danke für die hilfreichen Infos.
Genau!
This channel is great.
Thx mate!
Im still learning and I like to have it on 2.7k 60f or should I go with 1080
So helpful.