Awesome work mate. With the AFR reading giving false readings, this is more evident with ported motors. You can use an exhaust mounted wideband in conjunction with the post turbo wideband and compare the two readings. Do you have any other socials? Would love to give another enthusiast some support!
Thanks so much I’m just on RUclips at the moment but I’m working on a new website I’ll be putting together courses of everything I learn and putting it all up for free I really want to push that knowledge should be free. Thanks for the tip with the O2 sensor I do have a wide band about 12 inches after the turbo on the dump pipe and also had one up the back of the pipe but I still believe I was getting false readings. I’m gonna change the fuel system and run pure meth on one set of injectors and pump on another then stage them and just fudge the map to make it work I’ll be doing a full detailed video on all this on the channel
I’m not sure but this one was a combination of 2 the original and that one to make it look more original if u look at all the lines they are all perfect
Coils are LS1 coils the dwell time I can’t remember of the top of my head I’ll need to check but the timing is around 14deg if u look at my road tuning episode I pretty sure I show the timing map in detail
@@mingscustoms interesting I will do some digging maybe that’s why I was having issues with my W/M system it was having miss fire issues the coils I’m using are the LS1 coils that are sold from Haltech I’ll let u know wha I find out thanks for the tip I really appreciate it
@@mechanicalwarriorsofficial I have a Borg Warner s300 9180 with the 69mm inducer. I'm running it at around 11-12 psi during the break in. Haven't measured it for power yet
i got it from a place called kits for fun, but it was a lot of work to get it to look good I did all the paint work myself and prep myself I also did all the fibreglassing to as the bar had some mods to get it to look right.
Your Rx-8 is absolutely amazing.
Thanks mate appreciate the support:)
Awesome work mate. With the AFR reading giving false readings, this is more evident with ported motors. You can use an exhaust mounted wideband in conjunction with the post turbo wideband and compare the two readings. Do you have any other socials? Would love to give another enthusiast some support!
Thanks so much I’m just on RUclips at the moment but I’m working on a new website I’ll be putting together courses of everything I learn and putting it all up for free I really want to push that knowledge should be free. Thanks for the tip with the O2 sensor I do have a wide band about 12 inches after the turbo on the dump pipe and also had one up the back of the pipe but I still believe I was getting false readings. I’m gonna change the fuel system and run pure meth on one set of injectors and pump on another then stage them and just fudge the map to make it work I’ll be doing a full detailed video on all this on the channel
I love that front bumper. Could you let me know who makes them?
I’m not sure but this one was a combination of 2 the original and that one to make it look more original if u look at all the lines they are all perfect
Few questions, what coils and dwell time? What plugs? What timing are you putting into it at 14 psi ~6000
Coils are LS1 coils the dwell time I can’t remember of the top of my head I’ll need to check but the timing is around 14deg if u look at my road tuning episode I pretty sure I show the timing map in detail
@@mingscustoms interesting I will do some digging maybe that’s why I was having issues with my W/M system it was having miss fire issues the coils I’m using are the LS1 coils that are sold from
Haltech I’ll let u know wha I find out thanks for the tip I really appreciate it
@@mingscustoms also what power are u running on your engine ?
@@mechanicalwarriorsofficial I have a Borg Warner s300 9180 with the 69mm inducer. I'm running it at around 11-12 psi during the break in. Haven't measured it for power yet
@@mingscustoms let me know how u go with power that’s a good turbo your running
What turbo are you running on the car?
It’s a pulsar g35 1050r
How the hell did you put that head unit in there??? that looks so sweet im going to need a guide haha
complete custom dash is how :)
That's a beautiful rx-8. Really nice shade of blue and I love that front bumper. Where'd you get it from?
i got it from a place called kits for fun, but it was a lot of work to get it to look good I did all the paint work myself and prep myself I also did all the fibreglassing to as the bar had some mods to get it to look right.
What body kit is that?
i cant remember the name of it but u can find them out there we got this one on ebay
Get a real dyno that has correct gravity and load at the tires.
There is nothing better than a hub dyno ??