All a bit over my head Josh, but thoroughly enjoyed the benefit of your experience and knowledge. Particularly loved the test drive at the end and got to share your exuberance and excitement, keep them coming mate.
@@Racing_With_Mitchell good to hear there are still good soles in the game up here in Cairns QLD it’s just daylight robbery for most workshops some of the story’s I have heard are Insain
I’ve being tuning my S5 6 port turbo with an older Platinum Sport 1000. I wished it had long term learning would’ve made things a lot easier for street tuning. It’s only boosting under 8psi at the moment on what I considered a conservative timing and rich afr until I get it on the dyno. Thanks for the video. I learned a few new things.
Great video, I’ve just installed a haltech 1500 to my project and have managed to get it to run and idle pretty decent, I’m taking the car out this weekend to do some road tuning and this video has helped me understand what I need to do. I Would love to see more in-depth videos about the NSP softwares individual features as you explain everything very clearly.
Why was your TPS reading 8.5% when you were reviewing the Ignition Timing. Engine was off and I would expect the throttle was sitting at 0%. Great video btw.
Can u give me a bit more detail on your question. If it’s to rich it will pull fuel automatically in closed loop it just depends on whatever is on your target lambda map. Remember the goal of O2 correction is to get your actual AFR to match your target lambda AFR goals.
@@kevinobrien3063 I’m a bit confused do u mean for a catalytic converter? The before and after AFR? If so just ignore the afr past the cat as long as your AFRs coming out of the combustion chambers are on point u can bolt whatever exhaust u want on however changing the flow by changing your exhaust system will change your tune so whenever you change the airflow on a rotor in or out u want to monitor the AFRs and EGTs to ensure no damage occurs
"not a professional tuner"... Goes on to explain things perfectly lol good stuff. Loving these videos. Keep em coming.
Thanks for the feedback mate more to come :)
Wanted to say thank you for the video and the time spent. this was the best road tune tutorial to get my fc going on the haltech elite 750.
@@josephstack9946 your very welcome mate
All a bit over my head Josh, but thoroughly enjoyed the benefit of your experience and knowledge.
Particularly loved the test drive at the end and got to share your exuberance and excitement, keep them coming mate.
Thanks for the feedback I will keep them coming :)
Great info so I can learn what my tuner is talking about on my Hybrid Renesis
@@Racing_With_Mitchell the more you know the less people can rip u off ;)
@@mechanicalwarriorsofficial i got a pretty trust worthy guy so far. Poor dudes been guiding me for the past year
@@Racing_With_Mitchell good to hear there are still good soles in the game up here in Cairns QLD it’s just daylight robbery for most workshops some of the story’s I have heard are Insain
I’ve being tuning my S5 6 port turbo with an older Platinum Sport 1000. I wished it had long term learning would’ve made things a lot easier for street tuning. It’s only boosting under 8psi at the moment on what I considered a conservative timing and rich afr until I get it on the dyno. Thanks for the video. I learned a few new things.
Your welcome anytime here to help :)
Great video, I’ve just installed a haltech 1500 to my project and have managed to get it to run and idle pretty decent, I’m taking the car out this weekend to do some road tuning and this video has helped me understand what I need to do. I Would love to see more in-depth videos about the NSP softwares individual features as you explain everything very clearly.
So happy I could help you out there please let me know if you have any questions or problems I’ll be happy
To help out where I can
Thanks for the great video.! (just subscribed)
Your welcome mate more to come :)
Great vid mate, thanks for your knowledge about to go through this on my injected 12a. Super keen to see the vid on tuning for braps 😀
Thanks for the support, I should have the one on how to barp in the next couple days :)
id love to see u going for a drive with the go pro set up outside ur car 🤩 ‘RX-8 Outside POV’
Noted ! I’ll try get a camera on the outside on the next one :)
Why was your TPS reading 8.5% when you were reviewing the Ignition Timing. Engine was off and I would expect the throttle was sitting at 0%. Great video btw.
To be totally honest I’m not sure but I’ll do my best to find out, I would say the 8.5% would be the starting position
So am I right in saying it never goes into closed loop because it's always too rich
Can u give me a bit more detail on your question. If it’s to rich it will pull fuel automatically in closed loop it just depends on whatever is on your target lambda map. Remember the goal of O2 correction is to get your actual AFR to match your target lambda AFR goals.
Yes you are right .
I was thinking about either side of 14.7 for a cat to work
@@kevinobrien3063 I’m a bit confused do u mean for a catalytic converter? The before and after AFR?
If so just ignore the afr past the cat as long as your AFRs coming out of the combustion chambers are on point u can bolt whatever exhaust u want on however changing the flow by changing your exhaust system will change your tune so whenever you change the airflow on a rotor in or out u want to monitor the AFRs and EGTs to ensure no damage occurs
Im looking for the crank trigger settings for the 36-2-2-2 any info is apreciated!
What ECU are u using ?
@@mechanicalwarriorsofficial ft450 with oem rx8 sensor and wheel
@@marinaportocaribe what breed is that ? I’m not familiar with that model number
Having linear timing do it not detonate on low rpm do is not too much timing?
No, u haft to remember most of the map in the boost section the engine never sees in the lower RPM
Good video mate but you need practicing on gear changing. It was pretty pissed poor effort on the gears. Cheers Graham
🤣 I was trying to baby the box because at the time it was only good for 350 odd HP 😝
@@mechanicalwarriorsofficial ok I forgive mate
@@theaussienurseflipper.8113 watch my video on the rx8 state cut gear set