Yeah it def sounds really similar to F1 V10 although the whine of the straight cut gears of the gear box does detract from the sound a bit. Just needs to rev a further 6000 - 8000 rpm above what it is currently doing. 2004 - 2005 F1 revved to between 18,000 and 20,000 rpm. Fricken sick car though . The tone of the 5 rotor at these revs is sweet.
@@yjkader i get what your saying but it ends up being 3270cc and id say it would be called a 33b if mazda produced them, a 20b is 1962cc and mazda call it a 20b. and a 12a is 1146cc and mazda call it a 12a
The wizardry your team has pulled to make a 5-Rotor sound like the wild child of an Audi Group B car and a v10 F1 car from the late 90s and early 2000s is out of this world!!! Officially my fav build of your fleet. Cannot WAIT to see this thing in proper action.
Bro, I've been driving 30+ years, It's my favorite thing to do. Been watching WRC, FD, NASCAR as long as they've existed. I have NEVER felt so out of control...MAD RESPECT!!!
The intake sound is pure V10 F1! At low rpm, below 3000 - 4000, you really get that 5 cylinder sound come through plain as day. After that, it's pure, crisp, eardrum-tearing shriek that only a rotary can do. I like that comment about having all the rotaries, 1 to 6 in one place!
It's got a LOT of torque! Hooly dooley brother that's wild! 🤟 Yes it's 5 rotars but it's also 3.2L of capacity now and that's gotta account for something
The closer the Mad Mike phenomenom comes to perfection, you'll see that what's cool is not a matter of taste but it's science. Just like there is no better than Audi 5 cylinder what comes to what's cool in piston engines, there really cannot be a rotary any more cool than a 5 rotor 787D! Congrats, that really is something else!
"Just like there is no better than Audi 5 cylinder what comes to what's cool in piston engines" You sure? A lot of still awesome piston engines regarding to sportscars exist... Toyota Inline 6... you pretty sure know as 2JZ Nissans Inline 6, you maybe also know well as RB26 DETT Hondas Inline 4 in 2 and 2,2l for the S2000, F20C especially revving up to 9k rpm easily, and 240 HP+ is a nice figure for a 2l NA engine. And lets not forget crazy builds such as 1,9 TDIs fully blown going 500HP+, or even my 2010 Impreza Diesel (Boxer Diesel,...) which is blown up to 260 HP and 450 Nm with a slightly bigger turbo and STi intercooler. My summer car, a 1,9 TDi (1Z, 1996) Golf 3 Cabrio is "just" at around 130 HP, but this engine is also a damn tank in terms of reliability and low rpm torque (even more torque than my Boxer Diesel!), its extremely efficient (4-4,5l/100 km!), has already over 500k km on it after a total rebuild at around 400k km to make it last as long as possible. To be honest, i would even say classic (AFN, ALE etc.) 1,9 TDi engines are.... the best of the best when it comes to "coolness"... love this rumbling, massage seat replacing, black smoke line pulling little block having such potential (and reliability!)
I have been a fan of Mike for a while, but this just fuels me to work harder to be as half as awesome as this! IT SOUNDS LIKEA FERRARI V10!!! Made my day
Today in a Video from the SEMA a German Car guy namens JP ( from JP Performance in Germany /Dortmund he has a Golf2 calls Thunderbinny on the SEMA) shows us the McLaren from Mad Mike and i was so impressed that i have search the Channel and now i am here and i am much more impressed 👍 I have a lot of Videos to see thats for sure 😉 Thanks for all the cool and crasy stuff you show us and by the way, the Rotary sound is absolut amazing. LG from Germany /Niedersachsen PS. Sorry for the bad english
As a first gen RS3 owner, I appreciate your love for the Audi 5 pot. This engine really does perfectly blend the purr of the i5 with the rasp of a rotary (and occasionally a bit of F1 V10 in the upper rev ranges). Fantastic stuff.
Shakedown means a different thing for that man. What a marvelous sound that thing produces! Very close to the original 787B. Kudos for making that monster and thanks a lot for this video!
WoW! What a beast! 5 rotor on this chassis is beyond crazy. The beauty, the heart and soul how well engineered this machine is incredible. 😮💨 The sound of the rotor is indeed eargasm. This screams MADNESS 🔥
I love how Mike keeps og drift style alive while building the most technologically advanced drift cars…he still has stretched tires on this thing…insane
It's awesome to see all the hard work and dedication paying off in this video. Congrats to Mad Mike and his team, this car is sure to become an icon of motorsport engineering and kiwi ingenuity!
As soon as i heard of this build with the 5 rotor i got excited to hear it because i also love that off beat sound of 3 and 5 cyl engines. And what winner this is! I truly never thought I'd hear a better sound than a PP 3 rotor engine and I'm happy to be wrong. Epicccc mate. Eargasmic!
That car sounds INSANE. The fact that you get to build and drive these crazy cars is such an amazing job to have. You’re a lucky man Mad Mike. Would be my dream to be able to drive a car that crazy some day. Makes me wanna build a rotary too.
a symphony of 5 simple instruments in perfect time and pitch. the revs are music to my ears. this is the peak of automotive genius. ive been waiting for this day for sooo long... i cant lie i kinda thought rob dahm was gonna get there first mate... but the beasts from down under pulled off the W in the biggest way possible.. shes a beaute clark !
Mike.... I'm going to speak for probably 98% of us here. Keep up these long form videos.... we want these action packed episodes with some technical aspects too
Fan from🇲🇾.. Thanks for sharing your crazy rotor build to the world.. Never drive or been a passenger in one of the rotor car.. But at least can enjoy every each one of your build..
Just saw this while I was at the supercar drive experience, and it is absolutely mad! The talent you have MM and your crew shows the kiwi indunuity at its best. Such a huge project, can't wait to see it in action, better yet a ride in the passenger seat!? Legend.
Hell yea bloody weapon, sounds frickin nuts even on a computer. I still dream of finishing my four rotor 911 drift build, it will happen eventually. Also, how nuts is the Perspex window in the fire wall that's pretty sick. killing it bro as always. Definitely entertaining smashed that box. love it
I love that there's a window just for looking at the engine from inside the car, it'd be neat if you could see the exhaust glowing through it when it's at full chat but don't think that's possible from the driver's seat.
Mad mike bringing all the brap brap brap to the world!!!! Best sounding cars ever, all of your cars are absolutely mental and sound like a dream to any car guy 💯🔥🤤
I literally love this build 😍 I was lucky enough to work with Mike in the UK at SRD Tuning and he is a dude I helped out on the lambo but this thing is another level altogether
Mike's 5 rotor had been in the build for a good while before Mezzis build. I've heard that Mezzis has been fired up but yet to see any videos. Maybe he's having mechanical issues but it's been a few months since his last update. This was also his last build in partnership with PPRE before he's started building his own engines in the madlab
I'm from Puerto Rico 🇵🇷 and Mad Mike's name rings many bells there. In the world (we 🇵🇷) have some of the fastest 5 sec (Pistons or Rotary) car on the Quarter mile in the world... FACTS... And one of the only (Honda K series @Pimar ) in the 5 sec Quarter miles @263.76 We love your Rotary dominance Mad Mike... #1 🌍🌎🌏
Fun fact: Because rotaries fire once every revolution like a 2-stroke, they'll sound similar to a 2-stroke with a similar piston count and presumably even firing interval. Don't believe me? Go listen to a 2 stroke triple back to back with an N/A 20B. Fun fact 2: Because it fires as often as a 2-stroke, it has technically 2x the volumetric efficiency as a normal 4-stroke piston engine. Double firing also means double the pulses, so the firing interval also mimics a 4-stroke piston engine with twice as many cylinders. Effectively, this means a 13b is a 2.6L 4-cyl, a 20b is a 4.0L 6-cyl, a 26b is a 5.2L 8-cyl, and THIS right here is equivalent to a 6.5L V10. So basically, Mad Mike (and the formula Mazzei guys, at that) have a 6.5L V10 that revs as high as Ryan Tuerck's Judd swapped Supra but theoretically makes more power due to more effective displacement. If Mike wants to chime in, I gotta ask... This makes about 800-900whp, right? By my math that's what it should be doing.
Your fun fact 2 is incorrect because that would mean a 2 stroke (which the rotary is too) would be also be double displacement (Which they aren't) now only if u were to compare the engines to a 4 stroke would that be somewhat correct but still be inaccurate of actual displacement.
@@nightkingzz784 I mean, it kinda is. 250 2 strokes kept up with or beat 450 4 strokes for the longest time until manufacturers started getting their BMEP up high enough to counter the increased VE of 2-cycle engines, which after their own efficiency losses come out to about 60% better total, nowadays. IE if you have a 4-stroke that can do 85lb-ft per liter, a 2-stroke of equal displacement should do 136. 2s didn't get worse, though, it's just that 4s got much better, particularly at the "as-manufactured" level since, technically speaking (at least in the domestic V8 world) racers have been getting 80+lb-ft per liter since the 60s all on their own, and on 2-valve engines while simultaneously pushing the limits of reliable piston speeds, at that.
Like a cross between one of those Asian Murder Hornets a dentist's drill and and a Star Wars™ Incom T-65 X-Wing Fighter. Heat seeking tire slayer. Can't wait to see more of this Mike keep up the craziness we are here for it.
Love a Mad Mike Upload 🎉 💯🤙👌 Is the whole cage Stainless steel looks class i just cant remember 😅 I honestly nearly forgot about this car all together because of the McLaren 😅
![Blox Fruits Dragon Rework Update [Full Stream]](http://i.ytimg.com/vi/EqDAp8udhm0/mqdefault.jpg)
I remember as a kid, i thought how cool it would be if someone drifted a F1 V10 car. Looks like my prayers have been answered!
Yeah it def sounds really similar to F1 V10 although the whine of the straight cut gears of the gear box does detract from the sound a bit. Just needs to rev a further 6000 - 8000 rpm above what it is currently doing. 2004 - 2005 F1 revved to between 18,000 and 20,000 rpm. Fricken sick car though . The tone of the 5 rotor at these revs is sweet.
@@432htz3should look up the fornula supra, it has a judd v10 and is both a drift and time attack car
Check out Ryan tuerck judd v10 supra. Need to get these cars together!
@@432htz3 it does the combustion like a v10, five times per rev. thats why it sounds similar i think.
@@tozkal96its basically equivalent to a 2 stroke because rotaries fire every 360°
New best sounding engine ever , long live the 33b
32.5, it’s a 32.5b.
@@yjkader i get what your saying but it ends up being 3270cc and id say it would be called a 33b if mazda produced them, a 20b is 1962cc and mazda call it a 20b. and a 12a is 1146cc and mazda call it a 12a
@@yjkaderthey round up that's why it isn't the 19.5B
Common practice with displacement. Motorcycle manufacturers have been doing this forever @@BUZZNROTAS
@@shaynegadsden thanks for confirming what i just wrote
Hats off for taking so many pure sounding shots with no music over. Also you just put my dream car above any other that has ever been made.
Best sounding engine ever to bless me earholes
Thats the kinda noise that could heal the world
And after hearing this people will still decide to LS swap their RX7s which disappoints me....
Goddamn I swear every time MM posts a video my mood instantly gets better, the rotary is such a magical machine
😂🤘🏽
@@madmike.123 keep doing what you do best brother
The wizardry your team has pulled to make a 5-Rotor sound like the wild child of an Audi Group B car and a v10 F1 car from the late 90s and early 2000s is out of this world!!! Officially my fav build of your fleet. Cannot WAIT to see this thing in proper action.
Fitting description
Sounds nothing like a F1 V10
@hugo-pg5tv it definitely does, even if only a little
The sound of the 5 Rotary is glorious! The thing just sings
Mike this has to be the best sounding car you've ever magically engineered
mad-gically
Bro, I've been driving 30+ years, It's my favorite thing to do. Been watching WRC, FD, NASCAR as long as they've existed. I have NEVER felt so out of control...MAD RESPECT!!!
The intake sound is pure V10 F1!
At low rpm, below 3000 - 4000, you really get that 5 cylinder sound come through plain as day.
After that, it's pure, crisp, eardrum-tearing shriek that only a rotary can do.
I like that comment about having all the rotaries, 1 to 6 in one place!
need to get rob dahms 12 rotor down somehow, then you'd really have everything that exists!
15cyl?
@@Apexseal1Then we need the 8, 10 and 16 rotor ones to somehow exist.
Idle/low revs: Group B Quatteo
Mid revs: Huracan STO
High revs: V10 F1 car poked with a stick.
Let me get this straight....you put a 5 Rotor Engine into a 787 Chassis....okay Mike, thats MAD AF mate utterly MAD! you sir are the king of MADNESS!
Its a tube frame FD3S
Did neither of you watch the video? It’s a complete custom designed chassis
@@ttv8ra23 It's a custom chassis but the suspension points are all based on the FD RX-7 still.
@@NorwayVFXyep but it’s different wheel base, different track width. Different rack, diff, drivetrain etc etc. complete custom designed chassis.
New fav car from mad mikes stable hands down sounds the best imo, props to all involved in this build👌
It's got a LOT of torque! Hooly dooley brother that's wild! 🤟
Yes it's 5 rotars but it's also 3.2L of capacity now and that's gotta account for something
The closer the Mad Mike phenomenom comes to perfection, you'll see that what's cool is not a matter of taste but it's science. Just like there is no better than Audi 5 cylinder what comes to what's cool in piston engines, there really cannot be a rotary any more cool than a 5 rotor 787D! Congrats, that really is something else!
"Just like there is no better than Audi 5 cylinder what comes to what's cool in piston engines"
You sure?
A lot of still awesome piston engines regarding to sportscars exist...
Toyota Inline 6... you pretty sure know as 2JZ
Nissans Inline 6, you maybe also know well as RB26 DETT
Hondas Inline 4 in 2 and 2,2l for the S2000, F20C especially revving up to 9k rpm easily, and 240 HP+ is a nice figure for a 2l NA engine.
And lets not forget crazy builds such as 1,9 TDIs fully blown going 500HP+, or even my 2010 Impreza Diesel (Boxer Diesel,...) which is blown up to 260 HP and 450 Nm with a slightly bigger turbo and STi intercooler.
My summer car, a 1,9 TDi (1Z, 1996) Golf 3 Cabrio is "just" at around 130 HP, but this engine is also a damn tank in terms of reliability and low rpm torque (even more torque than my Boxer Diesel!), its extremely efficient (4-4,5l/100 km!), has already over 500k km on it after a total rebuild at around 400k km to make it last as long as possible.
To be honest, i would even say classic (AFN, ALE etc.) 1,9 TDi engines are.... the best of the best when it comes to "coolness"... love this rumbling, massage seat replacing, black smoke line pulling little block having such potential (and reliability!)
@@harrison00xXxall of that said and it could just be that it’s his favorite sounding Oma
having a window in the firewall into the engine bay must be one the coolest things I have seen on a car; absolutely insane!
Rotary heaven at it's finest! Thank you, thank you, thank you is all i can say. Bravo!
Absolute Weapon ! Cannot wait to see this Tandem drifting with the McLaren!
Linc and I!! But who’s driving what 🤔…
@madmike.123 dream big! Jet in the Lambo,Linc McLaren, Dad has to be in the 787!
I have been a fan of Mike for a while, but this just fuels me to work harder to be as half as awesome as this! IT SOUNDS LIKEA FERRARI V10!!! Made my day
Or an impact wrench. Or 787 . My gawd tho
Today in a Video from the SEMA a German Car guy namens JP ( from JP Performance in Germany /Dortmund he has a Golf2 calls Thunderbinny on the SEMA) shows us the McLaren from Mad Mike and i was so impressed that i have search the Channel and now i am here and i am much more impressed 👍
I have a lot of Videos to see thats for sure 😉
Thanks for all the cool and crasy stuff you show us and by the way, the Rotary sound is absolut amazing.
LG from Germany /Niedersachsen
PS. Sorry for the bad english
RAD!!!❤
Like WTF!? It seems like MM can't build a cooler car each time, but somehow he still delivers each time. This is purely genius!
I really didnt expect the sound to have SO MUCH of that distinct 5/10cyl character. Simply AWESOME.
As a first gen RS3 owner, I appreciate your love for the Audi 5 pot. This engine really does perfectly blend the purr of the i5 with the rasp of a rotary (and occasionally a bit of F1 V10 in the upper rev ranges). Fantastic stuff.
At full chat, the sounds reminds me of early 2000s Formula 1 with those V10 engines.
Immediately where I went too, this thing sounds absolutely glorious
in lower RPM it still has that lovely note of a five pot.
The best sounds of Formula 1 was the V10 era. Good job Mike.
The brm 16v is what I hear.
I would say the next gen 2.4ltr v8
You know it's bloody good when Mad Mike says "man this thing is crazy" with a giggle like that!
Shakedown means a different thing for that man. What a marvelous sound that thing produces! Very close to the original 787B. Kudos for making that monster and thanks a lot for this video!
WoW! What a beast! 5 rotor on this chassis is beyond crazy. The beauty, the heart and soul how well engineered this machine is incredible. 😮💨 The sound of the rotor is indeed eargasm. This screams MADNESS 🔥
I love how Mike keeps og drift style alive while building the most technologically advanced drift cars…he still has stretched tires on this thing…insane
Epic! That noise!! Also awesome camera shots from inside and that cage is incredible!
Serious F1 V10 vibes!! Soooo good!! Congrats guys, beautiful work!!
It's awesome to see all the hard work and dedication paying off in this video. Congrats to Mad Mike and his team, this car is sure to become an icon of motorsport engineering and kiwi ingenuity!
The sound it makes are amazing, at idle, at mid range, full revs! The best noises from an engine.
As soon as i heard of this build with the 5 rotor i got excited to hear it because i also love that off beat sound of 3 and 5 cyl engines. And what winner this is! I truly never thought I'd hear a better sound than a PP 3 rotor engine and I'm happy to be wrong. Epicccc mate. Eargasmic!
That car sounds INSANE. The fact that you get to build and drive these crazy cars is such an amazing job to have. You’re a lucky man Mad Mike. Would be my dream to be able to drive a car that crazy some day. Makes me wanna build a rotary too.
a symphony of 5 simple instruments in perfect time and pitch. the revs are music to my ears. this is the peak of automotive genius. ive been waiting for this day for sooo long... i cant lie i kinda thought rob dahm was gonna get there first mate... but the beasts from down under pulled off the W in the biggest way possible.. shes a beaute clark !
Muffler > No Muffler! That 5 Rotor sounds absolutely sick!
That 5 rotor is a thing of beauty! Mike's smile says it all haha.
Mike.... I'm going to speak for probably 98% of us here.
Keep up these long form videos.... we want these action packed episodes with some technical aspects too
Fan from🇲🇾.. Thanks for sharing your crazy rotor build to the world.. Never drive or been a passenger in one of the rotor car.. But at least can enjoy every each one of your build..
Love the fact that you put a window in the dash so you can see that beautiful engineering and craftsmanship!
Just saw this while I was at the supercar drive experience, and it is absolutely mad! The talent you have MM and your crew shows the kiwi indunuity at its best. Such a huge project, can't wait to see it in action, better yet a ride in the passenger seat!? Legend.
Absolutely epic! But the flimsy scarles wheel in it did make me laugh 😂
18:17 Had to wipe the tears out of my eyes from just hearing that beautiful engine scream. The amount of goosebumps I get every time is crazy.
Loads of torque, infinite RPM it’s a sickest thing the flames shooting out the pipe on drift. You’re a monster it’s awesome. Good job, Mike.
I love the LFA for its sound, I think I have a new favourite 😍
Absolutely fucking sick
Hell yea bloody weapon, sounds frickin nuts even on a computer. I still dream of finishing my four rotor 911 drift build, it will happen eventually. Also, how nuts is the Perspex window in the fire wall that's pretty sick. killing it bro as always. Definitely entertaining smashed that box. love it
5rotor send it Mike ! 🙏🏻😉👏👏👏👏
Love the 5 rotor sound has that down low 5 cylinder grumble then all of a sudden screaming banshee lol.
Holy moly, that's one of the best sounding cars EVER! 🤤
I drive an old 5 cylinder Audi and the sounds this car makes at lower rpm feels very relatable, sounds so good!
Good call on the muffler, makes it sound phenomenal with the slightly less raspy sound. 10:05 is just music to my ears.
A 5 cylinder engine by itself sounds amazing, but this freaking 5-rotor beast is just unreal to listen to.
Best cars out @ the moment...both of em' fr..he knows it too 😅 tht smile says it all mate
Dude, that clear window to see the engine from inside is sweet!! (Loving the sound of the 5 rotor, sounds like old F1 car haha)
that sound!!!!!
Thank you for taking us rev heads on the journey Mike much appreciated from Manurewa
What an absolute beauty, great stuff! Send it!!!
17:34 😂 21:55😳🤯
I am holding my 787D hot wheels car in my hand as I watch this, that 5 rotor is arguably the greatest engine ever made.
I love that there's a window just for looking at the engine from inside the car, it'd be neat if you could see the exhaust glowing through it when it's at full chat but don't think that's possible from the driver's seat.
Gawd dang Mikey, 787 sounds EPIC. Well done to you and the Madlab crew!!
That 5 rotor sounds absolutely insane. I love it.
What an incredible sound, and coming from such amazing car control!
the sound this car makes is just pure p.o.r.n. love it!
Mad mike bringing all the brap brap brap to the world!!!! Best sounding cars ever, all of your cars are absolutely mental and sound like a dream to any car guy 💯🔥🤤
Dude…. crazy sounding thing. Unreal project, it’s like a video game coming to real life. So cool!
I love watching Mike!! Pure love of racing and all of his projects… Hats off to you sir
What a different sounding rotary! It looks like a real handful to drive.
I literally love this build 😍 I was lucky enough to work with Mike in the UK at SRD Tuning and he is a dude I helped out on the lambo but this thing is another level altogether
Lifes a movie for Mikey, and im here for it .
The courage to tame that beast💯
The best sounding drift car. Unbelievable. One day we’re going to see this beast beside the DDE V12 Beastmode👌🏻
This thing legit sound like a group b audi met a v10 f1 car met a rotory and it is GLORIOUS
Who needs a speed channel on the display when the dash smiles at you the faster you go
That is fuckn insane 🔥🔥🔥🔥 cant wait to see this irl ❤❤
Damn and I thought the Mazzei Formula guy would be the first guy to put a 5 rotor in a race car lol. Mad Mike for the win
Mike's 5 rotor had been in the build for a good while before Mezzis build. I've heard that Mezzis has been fired up but yet to see any videos. Maybe he's having mechanical issues but it's been a few months since his last update. This was also his last build in partnership with PPRE before he's started building his own engines in the madlab
I'm from Puerto Rico 🇵🇷 and Mad Mike's name rings many bells there. In the world (we 🇵🇷) have some of the fastest 5 sec (Pistons or Rotary) car on the Quarter mile in the world... FACTS... And one of the only (Honda K series @Pimar ) in the 5 sec Quarter miles @263.76 We love your Rotary dominance Mad Mike... #1 🌍🌎🌏
man, this is why i love cars lol certain engines like 4cyl boxers, in-line 5cyl and rotaries have such amazing sounds to them!
Damn that thing is unreal !!!
13:32 Thank you for the Drum and Bass along with the best sounding car ever made. 🤘
The finished product of this is taking things to the next level 🔥🔥🔥
THIS IS THE SPIRITUAL SUCCESSOR TO THE LEGENDARY F1 V10S.... LEGEND MAD MIKE
Yeeeow! Can't wait for SummerBash 🤟
The whole build is next level.... The polished cage is really nice...
Love the sound!!!
but IMO a big single turbo would be sick.
Mazzei is building a turbo 5-rotor, you can check him out
What an absolute HERO the world needs more mikes go on bro you have some mental dreams 💯👊
Granturismo 7 needs madmikes car collection in the Redbull Selection !!!!
Noticed them 3D scanning bits of it near the beginning of the vid.
Rotiform have just been added to GT7 too, so… 🤞
@Dezroy they took away all the 3 rotors from GT6 and GT2 the cosmo . Mad mikes car collection will be winning
@@ClwnJuNkY was hoping the 3 rotor RE Amemiya rx7 race car would have been put in gt7 by now
@nickzom oh yes . I need my Fix !!!! They should have some Kind of Vote for what cars should be installed
My god, can't you guys just stop shoving videogames in every single car video?! Not even LoL players are so game-brained...
Amazing build! The sound comes straight from heaven !!
Love the Intro 🔥🔥
I really like the way that car looks. Can't wait to see it go round the track. The sound is so bada-- I like the sounds of v-8's but that's cool
Fun fact: Because rotaries fire once every revolution like a 2-stroke, they'll sound similar to a 2-stroke with a similar piston count and presumably even firing interval. Don't believe me? Go listen to a 2 stroke triple back to back with an N/A 20B.
Fun fact 2: Because it fires as often as a 2-stroke, it has technically 2x the volumetric efficiency as a normal 4-stroke piston engine. Double firing also means double the pulses, so the firing interval also mimics a 4-stroke piston engine with twice as many cylinders. Effectively, this means a 13b is a 2.6L 4-cyl, a 20b is a 4.0L 6-cyl, a 26b is a 5.2L 8-cyl, and THIS right here is equivalent to a 6.5L V10.
So basically, Mad Mike (and the formula Mazzei guys, at that) have a 6.5L V10 that revs as high as Ryan Tuerck's Judd swapped Supra but theoretically makes more power due to more effective displacement. If Mike wants to chime in, I gotta ask... This makes about 800-900whp, right? By my math that's what it should be doing.
Having ports rather than poppet valves is also why they sound like 2 strokes
Your fun fact 2 is incorrect because that would mean a 2 stroke (which the rotary is too) would be also be double displacement (Which they aren't) now only if u were to compare the engines to a 4 stroke would that be somewhat correct but still be inaccurate of actual displacement.
@@nightkingzz784 I mean, it kinda is. 250 2 strokes kept up with or beat 450 4 strokes for the longest time until manufacturers started getting their BMEP up high enough to counter the increased VE of 2-cycle engines, which after their own efficiency losses come out to about 60% better total, nowadays. IE if you have a 4-stroke that can do 85lb-ft per liter, a 2-stroke of equal displacement should do 136. 2s didn't get worse, though, it's just that 4s got much better, particularly at the "as-manufactured" level since, technically speaking (at least in the domestic V8 world) racers have been getting 80+lb-ft per liter since the 60s all on their own, and on 2-valve engines while simultaneously pushing the limits of reliable piston speeds, at that.
Like a cross between one of those Asian Murder Hornets a dentist's drill and and a Star Wars™ Incom T-65 X-Wing Fighter. Heat seeking tire slayer. Can't wait to see more of this Mike keep up the craziness we are here for it.
And Rob Dahm is putting that 12 rotor together.
how DOES he do it? he keeps building the most CRAZY cars EVER
From inside the cabin, it almost has that Audi 5 cylinder sound.
5 cylinder that can rev to the moon on steroids
Love a Mad Mike Upload 🎉 💯🤙👌
Is the whole cage Stainless steel looks class i just cant remember 😅
I honestly nearly forgot about this car all together because of the McLaren 😅
WOW.... When the revs get up sounds like a old school F1 car 🙂 Absolutely love it. Wonder if I can get 1 of those engines to fit into my Starlet?? lol
Dude's like Mike keep our Car/Motorsportculture a live! Thank you Mad Mike 🤘
1:50 that angle lmao
How often do you stop and just think “maan I’m livin’ the life”
Smiles throughout the entire video
Just need aerodiscs on the front to complete the 787b look.
That window to the engine bay in the fire wall is mint too.