@@gilinf.2662 when 1 broke in our workshop there was a rush to try for a piece for knife making. Much bigger sawblade than that,3-4 knife blades,with luck.
Man that was some hard material! Beautiful handle and unique assembly...loved it! Reminds me of an old Kershaw "Elk Hunter" I have. Nice EDC too. Well Done, Thanks Koss!
That was one heck of a saw blade. Great looking knife you've made!! I like the way you did the handle with the pins on the inside!! Enjoyed the video and I gave it a Thumbs Up
I am busy with a knife from a sawblade like that. it just gets harder the more you work it. I'm not even going to hear treat it. also, coffee stains it, but not black or grey, it's blueish colour.
I was really surprise that you manage to drill holes on your all hard saw blade, usually if I was using a hss drill bit, it will snap in instant, what kind of drill bit that you used to drill the holes on the saw blade sir?
Is that molybdenum? I made a light weight camping knife with the saw teeth on the back from a molybdenum power hacksaw blade (HRC ~62) just like that. It’s still holding up good after a year of use
High speed steels contain Mo (7-18% ish), W (3-7% ish ) Cr too depends on model, its heavier due to W, Brinnell hardness huge (diamond, or tungsten carbide drills required but the good ideea it doesn't need hardening, , grinding is useful to have SiC (carborundum) coated bands, and sand paper for hand. .
A Damascus from that HSS steel and a good stainless steel wil help against corrosion... Some sheets of 0.5mm nickel or cobalt between them will help bonding and against corrosion too...
Отличная работа! Кстати этот материал уже очень много лет используют сапожники и закройщики. У самого таких три. А цена на старые Советские полотна высоки.
Very nice! What drill bit are you using? We tried to drill through a similar saw but it didn't work, we only succeeded with a plasma cutter but it left an ugly mark.
Molto ... figo , anche per il design ! Ottima l'idea quella di impiegare una lama in acciaio robusta e già temprata. Ma non c'è il rischio che durante la lavorazione la tempra non si danneggi ? A ... rivederci e Buona giornata !
Been watching a while not the type to comment. But make a ninja kitchen knife set. Not only a bad ass work of art in your kitchen but would be a selling idea. Haven’t seen u do it🤷🏽♂️
Glass has an HRC 70+ (or 7 on Mohr scale) usually steels are 53-65 HRC (around) some HSS artre capable if > 65 HRC dome like ANSI M42 reach 69-73 HRC if well hardened... I presume some recipes of HSS could reach ~75 HRC beyond that is the world of ceramics (carbides, nitrures, etc) but those are sintherized...
Работа хорошая!!! Нож - то же хороший, сталь приличная, долго держит заточку, но есть и недостаток, очень быстро ржавеет, постоянно нужно протирать ...
@@ЕвгенийКутейников-о4г на приемках чермета. Я одно полотно купил за доллар а11р3м3ф2 вроде, второе так отдали валялось на земле р6м5. С первого сделал нож и пару резцов по дереву их ржа вообще не берет, до второго пока руки не дошли.
That handle is a work of art
thanks =)
you're right =))
Came here to say the same thing xD
Absolutely
But a little too big for such a small knife.
Koss, The Knife is a work of art but the handle is a grand slam, beautiful work.
P
Very beautiful final result - that handle - wow 👏🏻
Сглосен на все 100,ручка огонь!!!!! Браво.
Nice. very impressive. And the handle is just work of art.
best handle work I have seen in a while.
Beautifully done. Looks like a great knife to carry every day
One problem, depending on country's laws allow carrying.
Everything looks like knife material now, thanks to you
You're welcome
@@troy8817 youu?
Beautiful craftsmanship
Very precise and pretty
nice , love the detailed hidden pins
the blade may not be so pretty but that handle is a piece of Art and sure makes up for it, Very nice job
Very very nice!
I would make a second one with the saw blade still on. A multitool if you wish.
Робота супер!!!Орігінальна конструкція руків'я!
🤡🤡🤡🥰
I like the way you did that handle. First time I’ve seen that.
Awesome craftsmanship !!!!!!!!!!!!!!!!!!!!!!!
This is an elegant piece of art.
The handle is just great
Wow, the knife is so cool. Amazing.👍
Beautiful & skillful work 👍
if youve got all those tools its easy to make them, getting there with a file and blunt drills, nice work.
Very nice and solid job ! A knife everyone would want to have.
drilling holes in that blade... I can only say "Good Job!!!"
We used to pop holes with a welder...not pretty but we weren't making art pieces.
This was art.
What kind of saw blade was this? It looks pretty thick. Where can I get a blade like this? I like your work.
Beautiful handle
Like the brass scales on the handle. Awesome work
Hoi no hoi no
Beautiful knife sir
Beautiful knife, dude! Fantastic work!!! 😃
Stay safe there with your family! 🖖😊
You make this look easy, we know better! Good job!
Отличный нож. Благодарю за видео.
Wonderful work
Beautiful work.
Amazing work.
Best steel,cut steel, god for folding!
Nicely done!
Cracking knife mate 👍🏽
Wow, from a saw to a piece of art 🎨
Well done 👍
Sor mari dim kela koisu kintu
I like the brass inserts
nice work
What saw is that blade from? Don't think I've ever seen one that big or thick!
from power hacksaw machines... those blades are easily broken when dull...
@@gilinf.2662 when 1 broke in our workshop there was a rush to try for a piece for knife making.
Much bigger sawblade than that,3-4 knife blades,with luck.
Most likely from a steel fab shop, I operate a bandsaw the blade is 17 1/2 ft long, I have a blade just like it
My wife told me the same thing!! 🤣
Классный бытовой нож. Прекрасная работа.
That looks damn good man.
you see i like this guy, he does not repetedly beg you to subscribe
Very beautiful work 👍👍👍
Beautiful knife Koss good job
Man that was some hard material! Beautiful handle and unique assembly...loved it! Reminds me of an old Kershaw "Elk Hunter" I have. Nice EDC too. Well Done, Thanks Koss!
работа - класс! форма ручки - на любителя.
Тоже об этом подумал сразу, угол в центре рукояти же будет упираться в руку, неудобно наверное..
I agree
That was one heck of a saw blade. Great looking knife you've made!! I like the way you did the handle with the pins on the inside!!
Enjoyed the video and I gave it a Thumbs Up
Most likely a bandsaw blade from a steel fab shop. The saw I operate has a 17 1/2 ft blade. I have a thick blade just like it
@@allenwilson9656 Nice to know Thanks
@@allenwilson9656 рапид
I am busy with a knife from a sawblade like that. it just gets harder the more you work it.
I'm not even going to hear treat it. also, coffee stains it, but not black or grey, it's blueish colour.
very nice bro, good job!
BEAUTIFUL!!!!!
Beautiful knife! 😁👊 Greetings! 😁👍👍
I was really surprise that you manage to drill holes on your all hard saw blade, usually if I was using a hss drill bit, it will snap in instant, what kind of drill bit that you used to drill the holes on the saw blade sir?
It looked like a Diamond tip grinding bit. But I can’t be certain
@@thelos3999 what kind of brand or what do we call it if I want to find one?
@@windchaser7994 ceramic drill bit
@@НочнойТыгыдым-тыгыдым thank you for the information sir, really appreciated it!!
Handle is nice. I would've put a slight palm swell on it.
Love your work sir
Beautiful knife 🔪
Is that molybdenum? I made a light weight camping knife with the saw teeth on the back from a molybdenum power hacksaw blade (HRC ~62) just like that. It’s still holding up good after a year of use
High speed steels contain Mo (7-18% ish), W (3-7% ish ) Cr too depends on model, its heavier due to W, Brinnell hardness huge (diamond, or tungsten carbide drills required but the good ideea it doesn't need hardening, , grinding is useful to have SiC (carborundum) coated bands, and sand paper for hand. .
Beautiful
What an awesome masterpiece
Отличная мастерская работа
No heat treatment. Nice job.
Nice work
A Damascus from that HSS steel and a good stainless steel wil help against corrosion... Some sheets of 0.5mm nickel or cobalt between them will help bonding and against corrosion too...
Damn this knife looks like it handles amazingly, great work as always Koss!
Very nice and sharp skinning knife mate..,good job.👍
Awsome!
Beautiful!
Отличная работа! Кстати этот материал уже очень много лет используют сапожники и закройщики. У самого таких три. А цена на старые Советские полотна высоки.
Да красиво . Спасибо за видео .
Blade is looking underwhelming in front of the handle. It is looking so good
기술짱입니다.응원합니다
Нет слов, нет слов, одни эмоции
Why not leave the saw edge on top? Then 2 uses……….😍😍👍👍👍
Tremendo trabajo hermano,
Fantastic
Hermoso trabajo mis felicitaciones al artista 😎👏👏👏
Chup thak kela
What would've been cool was to have the saw teeth on the top of the blade.
Hmm.
For scaling fish I suppose?
Nope, because only idiots put a sawback on a knife! Grow up and stop thinking in online games.
Very nice!
What drill bit are you using?
We tried to drill through a similar saw but it didn't work, we only succeeded with a plasma cutter but it left an ugly mark.
Molto ... figo , anche per il design !
Ottima l'idea quella di impiegare una lama in acciaio robusta e già temprata.
Ma non c'è il rischio che durante la lavorazione la tempra non si danneggi ?
A ... rivederci e
Buona giornata !
Flashbacks from first video
Muita habilidade na cutelaria...parabéns
The angle grinder is strong with this one.
Pisau nya baguss bngt sir 👍🤝 indonesia 🇮🇩
Absolutely awesome brother!!!
Been watching a while not the type to comment. But make a ninja kitchen knife set. Not only a bad ass work of art in your kitchen but would be a selling idea. Haven’t seen u do it🤷🏽♂️
Шикарно🔥💥
Czy ten nożyk został zrobiony w twardym? Jeśli tak to szacun👏
excellent
Сomment in support of the channel and the video, as well as the work of the master.
Mantap sekali pisaunya bro 👍
What was used to drill in the power saw blade
early and beautiful knife
Excellent handle and really liked the brass. Spine area of the blade didn't match the beautiful handle. Blade would have looked better if cleaned up.
You made the knife handle very nicely👍👍
Nice 👍
I would love to be a blade smith!
Красота, смотрел с наслаждением! Спасибо!
Awesome handle concepts. What is the putposed of drawing the knife over the glass bottle @4:10?
steel hardness test. usually steel under 60 HRC can't scratch glass.
Glass has an HRC 70+ (or 7 on Mohr scale) usually steels are 53-65 HRC (around) some HSS artre capable if > 65 HRC dome like ANSI M42 reach 69-73 HRC if well hardened... I presume some recipes of HSS could reach ~75 HRC beyond that is the world of ceramics (carbides, nitrures, etc) but those are sintherized...
Работа хорошая!!! Нож - то же хороший, сталь приличная, долго держит заточку, но есть и недостаток, очень быстро ржавеет, постоянно нужно протирать ...
Я свой заполировал и он только чуть потемнел. Железка отличная, углерода от 0.8 и найти просто
@@romanpavlovich8768 где можно найти?
@@ЕвгенийКутейников-о4г на приемках чермета. Я одно полотно купил за доллар а11р3м3ф2 вроде, второе так отдали валялось на земле р6м5. С первого сделал нож и пару резцов по дереву их ржа вообще не берет, до второго пока руки не дошли.
@@romanpavlovich8768 у нас на приёмках нет такого добра, ну всё равно спасибо!
@@ЕвгенийКутейников-о4г видел такие у сварщиков, они их ломают и делают зубила для сбивания окалины.
Подскажите, каким сверлом делали отверстия. Спасибо
Go,go🔝👏🔥🤜🤛
Гарний ніж браво
Amazing..