For people who are going to make knife blades from power hacksaw blades. You need to get solid resharpenable high speed tool steel blades. DON'T USE THE BI-METAL BLADES! The bi-metal blades only have about 1/16" of tool steel right on the cutting teeth. The body of the blade is a Chromium Molybdenum steel like 4130 or 4140. Where as the solid HSS steel blades are usually made of M2. Power hacksaw blades made for non ferrous metals like bronze or aluminum are usually L6 or 8670. Power hacksaw blades are a nice option because you dont need to heat treat them. You do need to temper them. A tool store i shop at has HSS blades that are about 1.125" wide about 14" long and about 0.085 thick for about $6 each. I strip the paint and put them in a 425° oven for 2 hours then let them cool and repeat. I tested them at work once and they were hitting 57-58 Rockwell c. The steel is pretty thin, so grinding the bevels, i start with a 60 or 80 grit ceramic belt and i can grind bevels on a 4 inch blade in 5-6 minutes..
I am far from being any type of expert here. However, wasn't that supposed to be sharpened as a single bevel there? Or do they really have that small secondary bevel you put on it? Just curious is all....
@@tomhill4003 I don't know about the steel he used but I often do blades with old files and I guarantee you that I don't need to heat treat them again. They stay sharp for a long time.
In fact, this is not the case. As long as it is made of metal, it can present a mirror effect. It’s just that different materials require different grinding processes and materials.
Хорошая идея, сделать хороший нож из обломка полотна. Главное, чтобы полотно было цельнокатаным, а не с наваренными зубьями. Тогда нож будет на ,,ура".
"This short video records all the process of my knife making." really??? But I think you forgot the drilling process (your knife has 2 holes in the handle, right?!)
No matter what material, oxidation and rust are normal. Even stainless steel will oxidize. This is inevitable. You need to pay attention to daily maintenance, use tool maintenance oil, etc.
Hello, the blade he used was a old blade but not a used old blade it still had a coating on it. It was probably hhs that stuff is hard get it shiney it will stay shiney.
@@CarlWinter-oy8uf I made a knife with exactly the same blade, I tried oxidizing it in coffee, best I got was a blue tint. It polishes to a bright mirror. Keeps a nice edge too. About to make a kitchen knife with the rest of it.
@@ruanniemann1678 I GOT SEVERAL large hacksaw blades from a industrial company that had a mechanical giant hacksaw machine --the operator gave me the old 2 foot dull blades for knife making --however rust was always a nuisance --made sharp knives for hide skinning ---!
that knife will have problems with edge and tip curling and won't hold a decent cutting edge because you did NOT heat treat nor temper the blade. You just did stock removal. It might look pretty, but that's it. It won't make a good long term use for a cutting and marking tool. You need to learn about metallurgy, including proper heat treating and tempering methods. Nice try, but no sale from here. I've seen enough to know that I don't want any knife made by this man. I am a blacksmith, knife-maker and have a solid understanding of the knife making process. That includes a good solid basic understanding of metallurgy including, proper heat treating and tempering of edge tools. Not coming back.
It's like this. First of all, I am an amateur, not a professional knife maker. You are a professional here. If I don't understand something in the future, I will ask you for advice. Thank you for watching.
@@АркадийКлюгенштейн при всём моём уважении, ты немного путаешь определение и принадлежность... Катана является мечом только из-за своего названия на традиционном языке, на котором слово "сабля", насколько я знаю, отсутствует. Иероглиф "То" обозначает едва-ли не всё, что режет, начиная от ножа и оканчивая алебардой.... и просто переводится как "меч"
@@eugennagornov6004 я смотрю на конкретную вещь. Катана ни разу не меч. Это такая разновидность сабли. Любой человек минимально занимающийся холодняком это знает. Мало того это реальный фуфел, сделанный из фуфельной жести и заточено четко для применения малохольными физически нихонцами. А называть свое фуфло они могут как угодно, смысл от этого не изменится. Таблетки надо вовремя принимать чтобы мечи или еще чего там им не чудились.
@@АркадийКлюгенштейн ты не поверишь, но я ни разу не оспариваю то, что ты говоришь.... А про таблетки это ты верно сказал, многим надо бы попить.... особенно тем, кто так подгорает от разниц в названии и определении и тем, кто с первого раза не может понять прочитанное.
![I.N "HALLUCINATION" | [Stray Kids : SKZ-PLAYER]](http://i.ytimg.com/vi/n5B5q1Hwt_U/mqdefault.jpg)
For people who are going to make knife blades from power hacksaw blades. You need to get solid resharpenable high speed tool steel blades. DON'T USE THE BI-METAL BLADES! The bi-metal blades only have about 1/16" of tool steel right on the cutting teeth. The body of the blade is a Chromium Molybdenum steel like 4130 or 4140.
Where as the solid HSS steel blades are usually made of M2.
Power hacksaw blades made for non ferrous metals like bronze or aluminum are usually L6 or 8670.
Power hacksaw blades are a nice option because you dont need to heat treat them. You do need to temper them. A tool store i shop at has HSS blades that are about 1.125" wide about 14" long and about 0.085 thick for about $6 each. I strip the paint and put them in a 425° oven for 2 hours then let them cool and repeat.
I tested them at work once and they were hitting 57-58 Rockwell c.
The steel is pretty thin, so grinding the bevels, i start with a 60 or 80 grit ceramic belt and i can grind bevels on a 4 inch blade in 5-6 minutes..
l wish there was someone like him👍👍🤣
Bro i love your pencil sharpener
Thank you for watching, I'm glad you like my work,
Японский киридачи! Изготовление киридачи в Японии,входит в обязательную школьную программу для учеников на уроках труда!! Хорошая работа!! Респект.
Beautiful work!
I'm glad you like my work.
Great work by the way
I'm glad you like my work.
。以前父親常以斷鋸磨利作利刀，不須熱處理，只須磨利，斷鋸是到機械廠買的舊鋸片。😅😅
其实那种打磨，叫做冷磨，就是手动磨，温度不会超过500度，，，钢材不会退火，所以就不需要热处理
Obrigado por compartilhar!
I am far from being any type of expert here. However, wasn't that supposed to be sharpened as a single bevel there? Or do they really have that small secondary bevel you put on it? Just curious is all....
@@hepburn118 where did you see him put on a second bevel?
@@DKofDAH When he sharpened it he ground in a second bevel.
@@hepburn118 really? Didn’t seem so to me. And I couldn’t see it as well.
@@DKofDAH I saw him do it!
Что за клей
What about heat treating the blade? Did you do that off camera? ;>)
No, this material is a special material, so there is no need to do heat treatment
@@knifemaking-lee even HSS will not retain it's hardness under these conditions. What kind of steel is that?
@@tomhill4003 I don't know about the steel he used but I often do blades with old files and I guarantee you that I don't need to heat treat them again. They stay sharp for a long time.
@@tomhill4003 ,hello hss can be very hot before it looses its hardness. The maker never got it anyway near hot enough.
@@christopherckarkson5605 I didn't realize that this was HSS. Thanks for the clarification
very good job!😊👍
looks B.E.A.U.tiful
Thank you
Love this knife
I'm glad you like my work.
Any chance to note here thickness of blade at start.
tks
Yes, the thickness of the blade is a bit thin
Nice
красиво...наверно это для харакири?
Must be chrome or stainless steel to get that mirror finish ?
In fact, this is not the case. As long as it is made of metal, it can present a mirror effect. It’s just that different materials require different grinding processes and materials.
Amazing design and finish, great work
Kindly what is the glue you used?
I'm glad you like my work.
A quick-drying AB glue
Where did you get the studs that go through the blade and handle?
I bought most of my materials on the Internet.
@@knifemaking-lee thanks. Do you still have the web address?
@@alandisomma-od5fz I'll look for it and if I find it I'll write it under this comment.
@@knifemaking-lee thank you.
do you make any of these for sale ? if so , i would like to get one made please .
какой клей? эпоксидная смола с каким-то наполнителем? в "выборе материалов" про клей ничего
A quick-drying AB glue
I don’t see any heat treating, is there a reason for that?
The whole process is cold grinding, so no heat treatment is required
what did you use on handle thanks
@@WalterSmith-f5u wood and some plastic boards
Perfeito, excelente trabalho
I'm glad you like my work.
Хорошая идея, сделать хороший нож из обломка полотна. Главное, чтобы полотно было цельнокатаным, а не с наваренными зубьями. Тогда нож будет на ,,ура".
I'm glad you like my work.
@@knifemaking-lee сталь R-40?
Pretty cool
I'm glad you like my work.
No mostraste cómo abriste los orificios en la sierra
Excelente trabalho. Que tipo de cola é essa?
Ordinary AB mixed glue
Какой клей был использован?
Just use ordinary AB glue
Great
Ese material es muy duro y adquiere mucho filo....pero deber ser templado y revenido. Si se te cae SE PARTE.
Ahh, no me crees?? SUERTE😊
Yes, you are right. This material has high hardness but poor toughness, so it cannot be used to make long knives.
"This short video records all the process of my knife making." really??? But I think you forgot the drilling process (your knife has 2 holes in the handle, right?!)
Oh, thank you for watching and reminding me, I deleted some unimportant steps due to time limit
@@knifemaking-lee ну "ничего себе" неважные. это же не алюминий сверлить.
Muy hermoso 😊
Thank you for your recognition of my work
3:53 bro this tool name and making video
The name of that tool is a knife sharpening stand.
very nice
Thanks for watching, I'm glad you like my work
Сапожные ножи и стамески из мехпилы получаются отличные. Острые. Но металл очень хрупкий! 🤷🏼♂️🤔
What glue are you using..
A quick-drying AB glue
Тав вот оно как называется... А то мы всё дерёвня его сапожным ножом зовём. Может это потому что делаем на одном наждоке и заместо ручки изолента.
Thank you for watching and commenting.
Show 😊
Di jual berapa di Shopee? 😁
This is not expensive, only $20, but I don’t know how to sell my work yet. I’m learning, and when I learn, I’ll explain how to buy it on my channel.
@@knifemaking-lee nice 👍
Чем сверлил мехпилу ? Там сталь Р 18 🤔🤔🤔
Thank you for watching and commenting.
Красавчик нож!
👍👍👍
Buffing of handle little bit required.
Yes, you are right, the polishing is not done properly.
very very nice sir good job one request please send me and post and delivery address Knife Knife चाकू
Sorry, I gave this knife to a friend. I am very happy that you like my work. Thank you for watching, liking and subscribing.
👏👏👏
Нарисовал одно - а выразил совсем другое.😊
Впервые узнал что косяк(киридаши) это кинжал😂
أنا مشترك جديد✌️🇮🇶✌️
Thanks for subscribing
the blade should have been annealed and re-tempered. All that hot work softened the steel. otherwise, great video!
If the maker wanted to slice paper he could have used a pair of scissors. Really nice looking job though. And, he never stabbed anything? 🙄
Это нож для резки бумаги?😂🎉
Из стали Р6М5--? для бумаги ?? А по дереву из ВК8 использовать ???
@@ИванЭлектромехмен 🤣😂😅🤣
@@ИванЭлектромехмен ВК6ОМ!😁
Обычный сапожный нож)).. Из мех пилы.
@@Алексейф-н1д и только комменты на кириллице накиданы через вентилятор. Что, тёзка, жизнь не удалась?
@@Алексей5843 А что именно не так с комментом? Просто объективная оценка работы. Или ты тут шедевр увидел?
@@13Chron хрон, он и есть хрон.
@@Алексей5843 Ага, только он в отличие от некоторых делает ножи и кое-что в этом понимает.
@@13Chron ну и... почему только кириллицей накидывают на вентилятор? Ты-то, понимающий мастер, что тут делаешь? Руки с похмелья у хроника трясутся.🤣🤣🤣
I see you are using a broken large machine saw blade ---yes you will get a better finish -(if you can get one from industrial source )
Yes, you are right. I just use the materials that are more easily available at hand.
Кинжил для меня для нарезки бумажек 😂😂😂😂
Яйця гарно ним відрізати пацакам... А що головне майже безболісно
La sierra de afila con unas limas y todavía sirve....malísima idea reciclar algo que aún tiene vida útil
Хороший ножичек бумажные листики шинковать...
You are surely kidding ---a old saw blade gives a mirror finish to a knife blade ?? --I have tried it --just goes rusty brown in weeks --dull color!
No matter what material, oxidation and rust are normal. Even stainless steel will oxidize. This is inevitable. You need to pay attention to daily maintenance, use tool maintenance oil, etc.
Hello, the blade he used was a old blade but not a used old blade it still had a coating on it. It was probably hhs that stuff is hard get it shiney it will stay shiney.
@@CarlWinter-oy8uf I made a knife with exactly the same blade, I tried oxidizing it in coffee, best I got was a blue tint.
It polishes to a bright mirror. Keeps a nice edge too. About to make a kitchen knife with the rest of it.
Circular saws are very different, they go black almost immediately, due to a much higher carbon content
@@ruanniemann1678 I GOT SEVERAL large hacksaw blades from a industrial company that had a mechanical giant hacksaw machine --the operator gave me the old 2 foot dull blades for knife making --however rust was always a nuisance --made sharp knives for hide skinning ---!
Tathts onley the tags how is hardened the rest is skitiron,,ok,,,
Дешёвая постановка!
обычный сапожный нож.ничего сверхъестественного.
thank you for watching
Как дырку-то просверлил такой стали? Что не показали? А деревяшки приклепать я умел ещё во втором классе.
Use alloy drill bit
🤗🤗🤗🤗🤗💯💯💯💯💯👍👍👍👍👍🇰🇷
that knife will have problems with edge and tip curling and won't hold a decent cutting edge because you did NOT heat treat nor temper the blade. You just did stock removal. It might look pretty, but that's it. It won't make a good long term use for a cutting and marking tool. You need to learn about metallurgy, including proper heat treating and tempering methods. Nice try, but no sale from here. I've seen enough to know that I don't want any knife made by this man.
I am a blacksmith, knife-maker and have a solid understanding of the knife making process. That includes a good solid basic understanding of metallurgy including, proper heat treating and tempering of edge tools.
Not coming back.
It's like this. First of all, I am an amateur, not a professional knife maker. You are a professional here. If I don't understand something in the future, I will ask you for advice. Thank you for watching.
Allen Leuten die wirklich etwas mit Messern zu tu haben, lachen sich tot. Soviel sinnloser Hokuspokus.
What?
С каких пор "киридаши" стал кинжалом?
Ну с тех же, когда плохонькая сабелька из жести стала мечом (катана).
@@АркадийКлюгенштейн при всём моём уважении, ты немного путаешь определение и принадлежность...
Катана является мечом только из-за своего названия на традиционном языке, на котором слово "сабля", насколько я знаю, отсутствует.
Иероглиф "То" обозначает едва-ли не всё, что режет, начиная от ножа и оканчивая алебардой.... и просто переводится как "меч"
@@eugennagornov6004 я смотрю на конкретную вещь. Катана ни разу не меч. Это такая разновидность сабли. Любой человек минимально занимающийся холодняком это знает. Мало того это реальный фуфел, сделанный из фуфельной жести и заточено четко для применения малохольными физически нихонцами. А называть свое фуфло они могут как угодно, смысл от этого не изменится. Таблетки надо вовремя принимать чтобы мечи или еще чего там им не чудились.
@@АркадийКлюгенштейн ты не поверишь, но я ни разу не оспариваю то, что ты говоришь.... А про таблетки это ты верно сказал, многим надо бы попить.... особенно тем, кто так подгорает от разниц в названии и определении и тем, кто с первого раза не может понять прочитанное.
@@eugennagornov6004 ага а еще упорантам и демагогам.
обычный сапожный
👏👏👏👍👍👍🤝🤝🤝😁😁😁
І тут дез понтів ні як😂😂😂😂😂 коли ви виростите?
what？
very very nice sir good job one request please send me and post and delivery address Knife Knife चाकू
Sorry, I gave this knife to a friend. I am very happy that you like my work. Thank you for watching, liking and subscribing.
very very nice sir good job one request please send me and post and delivery address Knife Knife चाकू
Sorry, I gave this knife to a friend.