HOW TO REPLACE ALTERNATOR ON TRUCK/CAR, CHANGE AUTO GENERATOR INSTALL DIY TUTORIAL, jeep dodge ford
HTML-код
- Опубликовано: 7 июл 2018
- alternator: amzn.to/48jm9iP | ebay.us/x3Quka
car battery: amzn.to/49zrzHC | ebay.us/D6FakQ
car work gloves: amzn.to/3wqyVPi | ebay.us/NloQQy
clamp meter: amzn.to/42G3fSa | ebay.us/YOvVy4
flexible magnet: amzn.to/49ibFSn | ebay.us/AGLHBp
K&N air filter: amzn.to/3whNMeV | ebay.us/VxxDGi
mini ratchet: amzn.to/48jmphN | ebay.us/9yHyhE
wiper blade refill: amzn.to/3UIWQDR | ebay.us/WqAF7H
wrench tool kit: amzn.to/3UDyLOP | ebay.us/9KT1e8
gopro camera: amzn.to/3uxYQUR | ebay.us/oERJCZ
gopro head strap: amzn.to/42JwPX0 | ebay.us/FSrHkq
gopro pole mount: amzn.to/49tY7TC | ebay.us/nz3ZM8
gopro tripod adapter: amzn.to/3wsDdWn | ebay.us/ImUTFj
my drone: amzn.to/3I0OKPd | ebay.us/dx7SDE
tripod: amzn.to/3SYy29G | ebay.us/Oir7GF
The links above are affiliate links that belong to Amazon or Ebay partner programs. If you buy something through these links, I will receive a commission, of course without you having to pay anything more. Thanks for your support!
For contact options and links check my channel info,
Thank you for your interest in my videos!
Hi this is Geramicc85 and today I’m going to show you how I replace the alternator on my 96 Dodge Ram 1500 Truck. I ordered this new alternator from Remy. In this vehicle, the alternator sits here and is powered by the serpentine-belt. I will first disconnect the battery and also remove the air intake, including filter. Here is the ac compressor that we also have to take out. Then the belt must be removed by pushing back this tensioner. Okay I start by disconnecting the battery, so there won’t be any shorts while I’m working. Then I’m moving the air filter out of the way, with this K&N filter only one screw has to be loosened, then it can be pulled off easily. The intake pipe is held with this clamp. I also loosen the screw that holds the pipe on the intake manifold. Now I can take it out of the way. Next, I loosen the serpentine belt by pushing the tensioner back with a ratchet and removing the belt from the pulley. Then the air conditioning compressor is next. For that 5 bolts need to be taken out. I want to keep the lines connected, so that the coolant stays in there. That's why this screw is a little hard to get to. I am also loosening this bolt here which holds the lines. Also make sure that you unplug all connectors. And now I simply move the compressor over to the other side without disconnecting the ac lines. Now I have enough space to get the alternator out. To do that, I first disconnect the ground wire. The alternator is held with 2 bolts. I'll loosen them with a ratchet. The top is a threaded one. The lower one has a lock nut which must be held while loosening. Before the alternator can be removed, all cables and wires must be disconnected. The wires and this little connector box here are held by nuts, which I take all off. I use a large flat-head screwdriver to push the box off the threads. I now take the alternator out of the holder and turn it to the side to get to the positive wire. Again, the nut must be loosened in order to remove the cable. Now the alternator is free and can be removed from the engine compartment. Here we see the old and the new one. To avoid shorts, the positive terminal is equipped with this plastic cover. This now has to be transferred from the old to the new alternator. This socket is just long enough to grab the nut. Here we take the nuts off because the connector box will be re-installed afterwards. Now it's time to put the new part in. I want to connect the positive wire first because that makes it easier to get to it. Then I can place the new alternator into its final position. I just put the upper retaining bolt back in for now, but don't tighten it all the way yet. Next, I re-attach the connector box. It is simply pushed back onto the threads. First, the locking washer goes on, then the nut. I use a magnet to guide the nut to the right spot and then push and screw it in by hand. Then you can tighten them with the small ratchet. The lower bolt is still missing. Here we have to hold the back of the nut with the wrench so that the bolt tightens down the alternator. Now I can also tighten the upper bolt. The alternator sits in place and now everything else can be reassembled. First the bolt for the air conditioning lines, then the compressor can be reassembled. Here it’s a little tricky to get the lines back on the bolt, that also holds the negative wire from the alternator. Next I put the serpentine belt back on. For this, I pull back the tensioner and lay the belt over all pulleys. Please check my channel for more videos about my Dodge Ram and I hope this video was helpful to you. Please leave a like, comment and hit subscribe.
#carrepair #2ndgen #alternator 
Авто/Мото
Wow! Best Damm video I've seen! EVER! Well spoken and directives are in sync with camera views, which are of high quality! Very well done sir! And thank you! I'm using this to swap out my alt. on a 99 Ram right now!
I hope this guys doing well. The only Ram lifted 2WD guy i know other then me.
I think that was the best video description of a video that I've ever seen
You have the best videos for DIY truck repair. How about an update on the P1391 problem. Also, if you're moving onto another truck why not get a 97' Dodge Ram Cummins diesel 2500 or 3500? I'd imagine the 3500 would be a pita to drive in Germany.
Snappy editing, you put a lot of work into this one. I love it when the author shows respect for viewers' time. Was this somehow related to your P1391 you described previously?
Did this alternator fix your issue?
How about an update on the P1391 problem. Did you get it resolved?
why in tarnation are you taking off the ac pump?
What about 4th gen 1500?? I have to replace the alternator on my 09?
What size wrenches?
what lift you got
Omg he must have looked other videos afterwards and said omg all I had to do is remove the alternator that’s it
What was the problem on the doge
Sometimes ignition clicks and starts right up after jumping. If I give a lot of gas and let go quick it stalls. One day I had to jump start and not even 20 feet down the street it stalled. At one point I had to keep my foot on the gas to keep it from stalling. Alternator? Battery is 1 month old after changing a bad one
B E im dealing with the exact same problems. Was it alternator?
Definitely was helpful. Thank you
Great vid!
Thanks MUCH as this was helpful. My "97" has almost 122K on it. A little early for the alt to poop out? I started it up for a warmup the other A.M. Came back about 7 minutes later and it/alt was screaming. Never gave any slight symptoms before that; but when it went IT WENT!
thanks for the informative vid! love how you kinda pronounce "ratchet" like "ratshit"
why in the hell is he removing the ac pump?