Alternator replacement 94-01/02 5.2 or 5.9 Dodge Ram
HTML-код
- Опубликовано: 11 окт 2019
- The EASY way to replace the alternator in the 2nd generation Dodge Ram (94-01/02) with a 5.2 or 5.9l. I also talk about the harness placement and where the wires go, especially the ground bc I flaked where the placement was, don't judge! Lol.
Man, thank you. You show all the stuff that wasn't clear in the other videos I watched.
I agree. Thanks for saving us 30 minutes to hours of headache!
Wish I could like this multiple times. Thanks
Thanks for the video! Time saver!
“The Cummings”😂😂😂
Great example. Thank you!
Thanks so much sir, you saved me a lot of time and cussing. ☺👍
Great video my dumb ass forgot where I took the ground from and was in panic mode thank you
I need mine changed, on my Dodge Ram 1500, the battery cords keep burning out on the red positive, and there’s three cords for the nagative black cords that aren’t connected properly. It still turns on, but only drives slowly. Any advice?
Thank you sr.
Really wish you had it from the beginning 😕with timing belt
It's actually a serpentine belt, removing it won't effect timing, Those magnums have timing chains.
To remove the serpentine belt you just use a 14mm socket on the tensioner bolt. (Clockwise to release tension) the tensioner bolt is located on the left (passenger side) of the alternator pulley. If you need visuals 1A auto has a youtube video "How to Replace Serpentine Belt 94-02 Dodge Ram 1500"
Did you get a 90 amp or 136? What’s the better route?
My 5.9 the alternator has to come out the back. With the fan shroud on mine I cannot bring it through the front like yours. There is no room.
Hey, I just bought a beautiful 98 w a 318, the exhaust tone is pretty nice, but the whine is ugly AF! So.. I want to upgrade the alternator, but Idk wtf the factory amperage is. Could you please tell me??
Best thing to do is have your VIN run because it depends...here is a link to get more of an idea of how to find out which is in your rig.
www.dodgetalk.com/threads/98-ram-alternator-amps.32987/
You can always call a Dodge dealership, they run the VIN and can give exact details on it, I had the LA version and the parts were obsolete or were becoming that way. Best of luck.
Where does that positive wire hook up !! Plz
Back side of the alternator closer to the passenger side. Then the negative drops down to the lower bolt closest to the passenger side.
where can i get the voltage regulator that on the back of the alternator?????
Pick and pull is the ONLY place I've ever found the, and I always pul 2-3 of them, if you can find them... usually 1 out of 2 or 3 will work. Good luck!
To me magnums are better then Cummins less batteries so less wires means less stress lol
Who know we're the timing belt release is so I can install the alternator
Did you find it?
Yes lol it' took me a few videos and 3 hours to install 😅proud of myself
@@carlospineda648 where was it I currently need to change mine and I can’t find the release.
@@blindguy...1275 it's in the next bering wheel next to the alternator it's 15 mm ratchet turn right and it will loose enough to slide off the timing belt
Belt was already taken off
Disconnect battery
I need help
With what do you need help?
@@karnee26 so my alternator was replaced recently but a so mechanic and the truck ran fine but still didn’t charge sort of but there was a black wire behind the alternator connected to nothing which looked like a ground wire and lead to the battery both disconnected on both ends and on the closer end to the battery it looked like it should be on the positive so this lead me to think it might the alternators Connection
@@karnee26 do u have any social I can send u a picture?
Send a pics of the wire at both ends to this number, 707-396-2653. I'll look at them tomorrow and let you know.
Cummins! Not Cummings! There is no g in Cummins!
Are you still active? I have a ??
What's up?
@@karnee26 dodge ram van is not starting, making a click noise. Would do that before but eventually start, now not starting. Don't think it is battery
Have you checked to see if the fuel pump is coming on? If you have someone with you, have them advance the key while you put your ear to the tank side of the van or you can always rubber mallet the tank while the other person turns the ignition. I've had that happen, hitting the tank jumped the pump and the truck started, so I had to have the pump replaced.
@@karnee26 I will have to find a diagram that shows me where the fuel pump is. I could have someone help as well. What someone said is it could be an alternator as well.
Always remember these 3 things...Air, fuel, fire. Air is the easiest to check for, then fire (start with battery, then alternator and starter) after those, ground wires and spark plugs. The 3rd is fuel, listen for the pump, tap the tank (if it's in the tank or check the fuel rail to see if it has pressure), fuel filter and last would be your lines.
X
Belt was already off. Not really helpful