Thank you so much! I'm currently fighting with an run of Richardson hats and keep having thread break issues over the seam. I was using regular cap tear away, so I'm going to ditch that for light weight and tighten up my hooping! Thank for for restoring my sanity!
Could you recommend a "starter machine". I've sold hundreds of 112s and Yupoongs with heat press applications and I'm looking to get into embroidering hats. I've heard great things about Ricoma over the years and want to use your machines. Thank you.
Hi! It depends how fast you are selling, but our starter machine is our EM-1010 that has 10 needles. Check it out here---> ricoma.com/US/product-category/embroidery
Falto que hay que bajar la velocidad de puntadas, pero también es importante, que sacarás un diseño desde que se diseña en el programa hasta que se borda, porque muchas veces lo que falla es el diseño.
So i understand on how to do all she is talking about. Are there any other tricks and or tops on setting up the actual machine prior to embroidering on these R112 Caps???? Something for sure had to have been adjusted on the machine itself.......
Hi there, she may not have mentioned the speed in this video, but you can watch us to 112s as 1000 spm right here: ruclips.net/video/V1M2_aLaNWc/видео.html&ab_channel=RicomaEmbroideryMachines
Buenas tardes, gracias siempre por compartir tus experiencias. Tengo una pregunta muy importante, ya tengo 4 meses con mi MT 1501, (15 agujas), y a veces me ha sucedido que se me acaba la bobina a mitad del projecto y no he podido empatar el bordado despues de cambiar la bobina, especialmente con los caps, en el que estoy trabajando ahora, a veces presiono el boton de STOP y le doy hasta que retrocedo un poco mas de lo que me quede, pero el bordado no siempre empata en la ultiuma puntada y queda el trabajo con un vacio y me toca tirar el gorro y empezar otro desde 0, hay alguna forma de cambiar la memoria y hacer que re empieze a bordar desde donde yo creo que TIENE que volver a bordar?; gracias de anticipado por tu respuesta
Can you please tell me the brand and size needle best for Richardson caps? I noticed you said 90/14. I’ve been using Organ and get tons of needle breaks. Thank you 🤗
Hi there, thanks so much for watching. It depends on the type of hat and the design that you are stitching. For instance, structured hats are more difficult to embroider because of the tough seam in the center. Make sure that you design is stitching from the center out and the bottom up. That's the first thing. Secondly, you can use titanium needles (75/11 or 80/12) as these are more durable and will be able to better penetrate the fabric. However, if you are doing small lettering, you want to use 65/9 needles with 60W thread. If this is the case, make sure that your design is specifically digitized for small lettering. Hope this helps!
Hello! We have linked a video from our RUclips channel that shows a tutorial on how to embroider the sides of a hat. ruclips.net/video/CdqfSZQ8QLc/видео.html
Hi Brandon! This is a great question to ask in our Facebook support group, Embroidery and Custom Apparel Mastery. This group is meant for all lovers of embroidery with lots of resources and more members discussing topics and helping each other out and learning about Ricoma machines and other brands! We recommend you join this group as we'd love to have you! facebook.com/groups/embroiderymastery
Some of their hats are MUCH harder to embroider than others because some of them feel more like plastic on the inside rather than fabric. I lose a TON of needles on those caps. The Navy/White that you embroidered on is one of the easy ones. I have one of their cap colors that I just flat out cannot figure out how to embroider and it's their Khaki/Coffee colored cap. The closest I can get is by using the 90/14 needle, but my issue is that the needle is so thick that it frays the fabric around the design and completely DESTROYS the fabric when those needles pop... and they still break excessively. I've tried everything including attempts to soften the cap itself but still had to refund my customer because I just couldn't get them to cooperate.
Oh and I should add that I'm not even trying to embroider the seam on that particular cap (Richardson 112, Khaki/Coffee). It's just a single panel design.
Hi there, thanks so much for watching. This is a great question to ask in our Facebook support group, Embroidery and Custom Apparel Mastery. This group is meant for all lovers of embroidery with lots of resources and more members discussing topics and helping each other out and learning about Ricoma machines and other brands! We recommend you join this group as we'd love to have you! facebook.com/groups/embroiderymastery
This is the Ricoma TC-1501 to learn more about the machine and how to purchase it, click here to fill out a form and be contacted by our product specialists -> ricoma.com/us/contact-us
HI Alfredo, thanks so much for watching. It really depends on your business goals. We highly suggest speaking with one of our product specialists.They will be able to help you find the best machine to fit your needs. Please fill out our contact us form and someone will reach out to you! > ricoma.com/US/contact-us
Hi, I am struggling being able to embroider on a Richardson 112 on just either the left side or right side with the design not being too high. Can you do a video.
Hi there, the type of thread that you are using depends largely on the hat, size of the design and so much more. Check out this Ultimate Embroidery Cheat Sheet for helpful info that you can refer back to: info.ricoma.com/the-ultimate-embroidery-cheat-sheet
Hi, my name i Georgia, I received my em 1010 in around January and have been having a hard time. I was wondering if anyonee lives in Maryland around pikesville or baltimore.
Hello! our EM-1010 is our smallest embroidery machine model that has 10 needles and is perfect for beginner, at-home embroiderers! click here to learn more about the em-1010 ricoma.com/us/contact-us
Hola. Afortunadamente, este video y la mayoría de nuestros videos tienen subtítulos en español. Puede activarlos haciendo clic en la rueda de configuración en la parte inferior izquierda del video y seleccionando subtítulos. A veces, RUclips tarda un tiempo en generarlos.
Hello! If you are interested in purchasing our machines, please send us your name, phone number, email address and location so that one of our product specialists can reach out to you! > ricoma.com/US/contact-us
Hi I'm new to this embroidery and I have the tc 1501 but I was wondering on how big can the design can be for a hat
Thank you so much! I'm currently fighting with an run of Richardson hats and keep having thread break issues over the seam. I was using regular cap tear away, so I'm going to ditch that for light weight and tighten up my hooping! Thank for for restoring my sanity!
Yes! Proper hooping is 80% of the battle! We have a ton of videos showing how to embroider on Richardson caps so feel free to check them out!
ALL OF YOUR VIDEOS ARE VERY INFORMATIVE! THANK U FOR THE HELP.
Thank you so much for watching! Happy to help. -Laura
Could you recommend a "starter machine". I've sold hundreds of 112s and Yupoongs with heat press applications and I'm looking to get into embroidering hats. I've heard great things about Ricoma over the years and want to use your machines. Thank you.
Hi! It depends how fast you are selling, but our starter machine is our EM-1010 that has 10 needles. Check it out here---> ricoma.com/US/product-category/embroidery
It would be nice if all the Ricoma Reps. gave the same info. You guys are all over the place.
Hi Tim, can you submit a request with the team so a tech can reach out to you? ---> ricoma.com/US/support
Falto que hay que bajar la velocidad de puntadas, pero también es importante, que sacarás un diseño desde que se diseña en el programa hasta que se borda, porque muchas veces lo que falla es el diseño.
Me podrás decir qué máquina ella usa para bordar ? Gracias
So i understand on how to do all she is talking about. Are there any other tricks and or tops on setting up the actual machine prior to embroidering on these R112 Caps???? Something for sure had to have been adjusted on the machine itself.......
Did you look at the video we did on this? ruclips.net/video/V1M2_aLaNWc/видео.html
So for smaller text on Richardson or flex fit hats would you not recommend 75/11 needles?
How small? Anything 6mm and above should be fine to use 80/12 needle.
I did not hear you mention or read a comment on it, but what speed are you using for the 112’s, or does it matter?
Hi there, she may not have mentioned the speed in this video, but you can watch us to 112s as 1000 spm right here: ruclips.net/video/V1M2_aLaNWc/видео.html&ab_channel=RicomaEmbroideryMachines
Buenas tardes, gracias siempre por compartir tus experiencias. Tengo una pregunta muy importante, ya tengo 4 meses con mi MT 1501, (15 agujas), y a veces me ha sucedido que se me acaba la bobina a mitad del projecto y no he podido empatar el bordado despues de cambiar la bobina, especialmente con los caps, en el que estoy trabajando ahora, a veces presiono el boton de STOP y le doy hasta que retrocedo un poco mas de lo que me quede, pero el bordado no siempre empata en la ultiuma puntada y queda el trabajo con un vacio y me toca tirar el gorro y empezar otro desde 0, hay alguna forma de cambiar la memoria y hacer que re empieze a bordar desde donde yo creo que TIENE que volver a bordar?; gracias de anticipado por tu respuesta
Hola Miguel! Aqui esta este video, ojala te ayude: ruclips.net/video/bdj9ukMHSUM/видео.html
Super cool 😎👌
thanks!
Can you please tell me the brand and size needle best for Richardson caps? I noticed you said 90/14. I’ve been using Organ and get tons of needle breaks. Thank you 🤗
Hi there, thanks so much for watching. It depends on the type of hat and the design that you are stitching. For instance, structured hats are more difficult to embroider because of the tough seam in the center. Make sure that you design is stitching from the center out and the bottom up. That's the first thing. Secondly, you can use titanium needles (75/11 or 80/12) as these are more durable and will be able to better penetrate the fabric. However, if you are doing small lettering, you want to use 65/9 needles with 60W thread. If this is the case, make sure that your design is specifically digitized for small lettering. Hope this helps!
Hello, do you have a video with embroidering on left panel on a hat?
Hello! We have linked a video from our RUclips channel that shows a tutorial on how to embroider the sides of a hat.
ruclips.net/video/CdqfSZQ8QLc/видео.html
How do you prevent the halo from the presser foot around the design?
Hi Ashley! Can you clarify on what you mean?
Hi would these needles be sharp?
You can use the regular needles --> 90/14
will you doing any videos on the swd 1501
Yes stay tuned.
What brand hat hoop is this? I have a gen 2 and I can’t get close enough to brim
Hi Christy! We recommend reaching out to the service team so they can give you some pointers ---->service@ricoma.com
i have a em1010 how can i get the Embroidery closer to the bill ?
Hi Brandon! This is a great question to ask in our Facebook support group, Embroidery and Custom Apparel Mastery. This group is meant for all lovers of embroidery with lots of resources and more members discussing topics and helping each other out and learning about Ricoma machines and other brands! We recommend you join this group as we'd love to have you! facebook.com/groups/embroiderymastery
Great video
Thanks!
Some of their hats are MUCH harder to embroider than others because some of them feel more like plastic on the inside rather than fabric. I lose a TON of needles on those caps. The Navy/White that you embroidered on is one of the easy ones. I have one of their cap colors that I just flat out cannot figure out how to embroider and it's their Khaki/Coffee colored cap. The closest I can get is by using the 90/14 needle, but my issue is that the needle is so thick that it frays the fabric around the design and completely DESTROYS the fabric when those needles pop... and they still break excessively. I've tried everything including attempts to soften the cap itself but still had to refund my customer because I just couldn't get them to cooperate.
Oh and I should add that I'm not even trying to embroider the seam on that particular cap (Richardson 112, Khaki/Coffee). It's just a single panel design.
Hi there, thanks so much for watching. This is a great question to ask in our Facebook support group, Embroidery and Custom Apparel Mastery. This group is meant for all lovers of embroidery with lots of resources and more members discussing topics and helping each other out and learning about Ricoma machines and other brands! We recommend you join this group as we'd love to have you! facebook.com/groups/embroiderymastery
Are you able to use a cap digitized design for other fabrics?
HI there, designs digitizing for caps are specifically meant for the curvature of the cap and would not work on any other garments.
Thank you
Whats the name of the machine that you are using, and where can we get it?
This is the Ricoma TC-1501 to learn more about the machine and how to purchase it, click here to fill out a form and be contacted by our product specialists -> ricoma.com/us/contact-us
May i know the size of logo?
Thanks for the video beautiful
Our pleasure! Thanks for watching :)
I need help lining the logos up on 6 panel caps , Trace does not help at all 😔. It just goes the opposite way and the logo is not centered
Hi there, please submit a request with the service team so they can help ---> ricoma.com/US/contact-us
What machine would you recommend for a beginner?
HI Alfredo, thanks so much for watching. It really depends on your business goals. We highly suggest speaking with one of our product specialists.They will be able to help you find the best machine to fit your needs. Please fill out our contact us form and someone will reach out to you! > ricoma.com/US/contact-us
Hi, I am struggling being able to embroider on a Richardson 112 on just either the left side or right side with the design not being too high. Can you do a video.
You probably just have to change the parameters on your machine to lower the design
@@ricomatv how do I change the parameters. I’ve searched for so long and can not find any information on that
What to do if your machine is saying to change to a larger frame when doing caps
Hi Beth. What kind of caps are you trying to embroider?
Where can we find the needle that we need for these hat I been looking all over
Drop a link
We get all our embroidery supplies at Allstitch.com or Joan Fabrics.
Where is the cap embroidery guide that you talk about at the end? Is it the 7 costly mistakes?
Yes thats it
hi the needles is it normal machine needles?
Hi, for the Richardson's you can use 75/11 titanium needles
Do you always use bigger needles for Richardsons ?
Not always, but it certainly helps
What needle for little letters on same hat
Hi! You can use 70/10 or 65/9.
Wats the best thread for all hats please
Hi there, the type of thread that you are using depends largely on the hat, size of the design and so much more. Check out this Ultimate Embroidery Cheat Sheet for helpful info that you can refer back to: info.ricoma.com/the-ultimate-embroidery-cheat-sheet
How about doing caps with the em 1010
Hi there, you can check out either of these videos:
ruclips.net/video/tWNFly1C2OM/видео.html&t
ruclips.net/video/2QjGNFUpxrA/видео.html
Which stabilizer is good for hoodie?
If you don't wear it tear it! We'd recommend using cutaway backing.
is there something special that needs to be done to digitize something for these hats? the image tends to get distorted
HI there, thanks so much for watching. It sounds like it's not digitized for caps. Check out this video! > ruclips.net/video/JJEl1TC66lE/видео.html&t
My image sits why too high. How do I move it closer to brim? I am using an em 1010.
Hi you can watch this video for help ruclips.net/video/tWNFly1C2OM/видео.html
what needle do you recomend?
your standard 75/11 should work just fine!
Around how much does the ricoma embroider machine cost?
Fill out this form and a product specialist will reach out to help you:
hubs.ly/H0mthNk0
I've heard single head 10 needles is around $8600
Where can I purchase Richardson hats?
Hi there, check out our list of favorite wholesalers, blog.ricoma.com/2019/06/06/top-10-wholesalers-for-all-of-your-embroidery-needs/
What's the name of machine and wher we can find
Hi there, the machine used in this video is our Ricoma Tc-1501, you can learn more about it here: ricoma.com/US/machine/1501-tc
what model of machine is that?
That is our TC-1501 15 needle machine! Fro more information on this model, you can click here- ricoma.com/US/machine/1501-tc
Hi, my name i Georgia, I received my em 1010 in around January and have been having a hard time. I was wondering if anyonee lives in Maryland around pikesville or baltimore.
Hi there, contact our support team and they will give you some options! ricoma.com/us/tech-support
Was it EM 1010
Hello! our EM-1010 is our smallest embroidery machine model that has 10 needles and is perfect for beginner, at-home embroiderers! click here to learn more about the em-1010 ricoma.com/us/contact-us
Do you sell Richardson hats?
No we don't we just teach you how to embroider them!
Y la traducción a español?
Hola. Afortunadamente, este video y la mayoría de nuestros videos tienen subtítulos en español. Puede activarlos haciendo clic en la rueda de configuración en la parte inferior izquierda del video y seleccionando subtítulos. A veces, RUclips tarda un tiempo en generarlos.
thanks, wanna visit u.
Feel free to call us anytime to set up an appointment at our headquarters! ricoma.com/US/contact-us
Hello
Hello, how can we help?
Why do you have to fast forward the entire embroidey process?
Because then our videos would be really long, lol! Thanks for watching!
First comment.... means nothing..... :-)
I am interest spot payment
Hello! If you are interested in purchasing our machines, please send us your name, phone number, email address and location so that one of our product specialists can reach out to you! > ricoma.com/US/contact-us
Hello
Hello! How can we help?