Printing a Giant Hairy Lion on the Prusa XL - how did it turn out?
HTML-код
- Опубликовано: 5 сен 2024
- How long did a giant Hairy Lion take on the Prusa XL?
File Details - www.printables...
Filament - amzn.to/46ZN9o2
Support this channel by becoming a member & to get access to perks:
/ @tada3dprinting
Support this channel by purchasing merchandise - tada3dprinting...
Visit my Amazon Storefront - amzn.to/3Pxu31X
The brilliance of the community in coming up with a way out of the box idea for hair like this is awesome. Looks like the XL did a great job with it
Thank you!
I was thinking the size didn't look all that much bigger right up till when you stood them side by side and then the original one looked so tiny lol!
Haha yeah it's huge. Thanks!
Thank you for all the great content on the Prusa XL. There isn't much out there so its very refreshing to see constant and updated info about it to keep up with the current 3d info.
Thank you!
Wow, this is by far the biggest version of the Hairy Lion I've ever seen! Glad you liked the model. I'm happy to see your exeptional make of this wonderful model I reuploaded on Prinables. Thank you!
Oh so glad to hear from you! Yeah it turned out great! Thanks so much for providing the file!
If you right-click on the Arrange button there's an Enable Rotations checkbox. If it is enabled the Hairy Lion will automatically rotate to fit on the printbed when you Add it.
Ok thanks so much!
You're a patient girl lol, 800g is a super big print! Well done on taking the chance,(I don't think I would've have been so brave) he came out awesome! 👍. I use prucer slicer as my daily driver/slicer and I've been getting those damn warning messages about bed adhesion too on every print. I too ignore them lol. Again, great work and great time lapse on the print. Keep it up
I'm happily surprised it turned out! Glad to know I'm not the only one ignoring the warnings. Thanks so much!
Cool to see the hairy lion again. I remember printing one back in 2017 timeframe after Joel introduced the model to us all. Mine was smaller than your full size one for sure. The print is probably in a box here somewhere. Thanks for sharing your XL adventures and giving me a flashback!
Thank you!
Glad to see you printed this. I was one of those who suggested you try it. In the future you can use a serrated knife to cut the brim away. It works a treat. Your lion turned out very nice. And big!
Thanks so much!
Fur is tricky in 3d even when you don't have to print it. This is an awesome approach and outcome!
Fuzzy hair might be cool on his body too. Thanks!
I'm learning a lot about PrusaSlicer seeing your work. I would never normally print anything like this, but I really like it.
Thanks so much!
If you right-click on auto-align in PrusaSlicer, you get a dialog box that enables rotation! I'm not sure if it would be "smart" enough in this instance to fit the part though.
Oh that's good to know. I'll try it out. Thanks!
Great print. Another trick for this hairy prints is to put the hairs into hot water, but i do not know exact temperature as i have not tried it.
Oh yeah that sounds like less of a mess blowing pieces of filament all over the place. Thanks!
That's some MASSIVE lion. Turned out really well :) Thanks for sharing.
Thank you!
Another crazy idea, if it is really hollow, maybe use it as a coinbank
That would be cool. Thank you!
This was the best lion I’ve seen 3D printed.
Thank you!
The lion is one of the first prints I made when the MK3 first came out. Great choice.
Thank you!
WoW! That is epic, and a perfect colour choice!
I guess I'll have to try and fix my Ender 5. I'd like to print this, and I am a Leo after all.
Thank you!
All this work TADA earned you a subscription today :)
Thanks so much!
I'm actually really impressed by this, super creative. Love it
Thanks!
What an awesome print!
Thank you!
Well Done, Roar
Thanks!
wow...just wow..
Looks fantastic! Great job!
Thanks!
Adaptive fills are okay, but some models you will get perimeter problems or structure issues as the parts cool at different rates. No hard rule when to turn them on/off---unless it is a structural part.
Good to know! Thanks!
your "align" issue is because you need to right click the align button and there is a checkmark that enables rotation.
might have not come over from the previous install
Ok good to know! I'll look for it. Thanks!
See, I told you. The Hairy Lion is awesome. 🎉
You're right! Turned out great! Thank you!
@@tada3dprintingYour Welcome. I did mine in Polymaker Loyalmoses Sparkle Green
Cool thing about prints like this is that they're really only possible with 3D printers. You can't really have hair like that with injection molding.
Oh that makes sense. Thanks!
I do not yet have a XL however I do plane large prints
You'll love it!
I'm torn between getting an XL or MK4. I could almost get two MK4 for the price of one XL, but when i see big prints like this big lion, it is so cool. I think i will get the mk4 though. Maybe I'll get an XL or comparable in a few years though. 👍🦁
If you purchase an XL now, is it still just the pre-order amount due until it ships? If so, I would say do both. Get on the list for the XL and get an MK4 for now. Then when the email comes for the XL, you can decide then. Hope this helps!
@@tada3dprinting It's a preorder for a deposit and the current prediction for new orders is December just to process them. It will take a while, but the deposit is fully refundable at any moment.
get bambu lab its faster better and enclosed
@@tophatv2902 ha, thank you. Bambu has nice printers but I'm set on a Prusa.
@@BennyTygohome cool, was the very large build size the selling point for you? Just curious why bambu wasn't your go to solution
Replacing a bug with another bug...this seems to be the issue of so many software developers these days. Dunno why though ^^
0:32 aren't those print settings a bit low? Thought this corexy printer would print much faster between 200-300mm/sec
They are better than the MK3 but yes they are a bit slow. Waiting on input shaping for the XL and they will speed up a lot. Thanks!
That's nice! :)
Thanks!
Amazing. Really impressed how well the hair comes out after a blow dry. Have you tried any pre configured faster settings on prusaslicer?
Not really. The .32 speed is my main one right now. I did try speeding everything up on my octagon video but that didn't work out. Thanks!
Over 1.25 days of printing is a brave test lol, but then again that’s what they are made for.
I pre ordered a two tool XL awhile back and news broke last night that they’ll be shipping in a couple week. Will you be upgrading to a multi tool version at some point?
Oh that's great to hear! I have a 5 tool head semi-assembled on order. But I'm wondering if add ons for this one will come out first? Either way, I'd like to have a 2 toolhead and a 5. Thanks!
Pretty cool. Wonder what that looks like with rainbow filament
That would be pretty! Thanks!
I wonder if PETG would work for this model? Less brittle hair but slightly higher temp to style?
Oh that's a good question! I just prefer pla. Thanks!
Thanks!
Do you think the hairs were actually stabilizing the lion so that less infill was required?
It's possible. It kind of freaked me out when I first saw it because I assumed it would fail. I think I'll probably try it out on other prints now too.
That's totally Aslan🦁
Haha yeah at first I was thinking Mufasa but when it finished, I was thinking Aslan. Thanks!
The printer hurts my ears lol
It's loud but I also have it on ikea furniture in a metal walled room.
Print Time was?
1d 6h 42min
@@til2162 thats ok.
thats why people make fun of 3d printing
anyone else gets model errors in cura ? :D
I haven't used Cura for anything in a long time. If you are using a Prusa printer, you may want to check it out in PrusaSlicer. Thanks!
@@tada3dprinting no only a creality cr6se and 3v2..
Sliced it with the model error and printed just fine..only messed it up with giving the lion a haircut haha
are you interested in tinkering with/ building 3d printers or just anything aside from using it more like a tool? I'd love to see more women in that space as im kinda nerverous to start my channel alone in that community 😭
I like to focus more on what I can make with the printer, rather than tinkering with the printer itself.
I have seen a couple other women in the 3d world, but I do agree it's very few. But honestly I am shocked at how nice and supportive everyone has been so far!
I defined feel like I have a lot to improve. But for me, I just had to jump in and start or it would never have happened! I would encourage you to just try it out! Thanks so much!
Bad job on the hairdo. Fail.
I hate vocal fry. I want to watch the video, but I can’t. :(
such a waste of material and energy :(