im sorry i must have misheard. 199.95? its basically an ar9mm without having to buy the upper and lower and whatnot. the iciing on the cake is you just put in your threaded and it is now suppressor ready. jfc. 199.95
I look forward for a kit that this kit can mount into to turn it into a bullpup, and then for another kit to convert that kit to a normal setup, and then a super short, subcompact version that is CCW friendly
Can a 16” barrel be with this stock and the Glock 19 so it’s legal smegal pistol caliber carbine . . . and no paperwork? That would be the perfect enough home defense firearm for many of us.
Hey guys, this absolutely looks mad. Would be cool if there would be an aluminum version, and an AR-15 style charging handle. Other than that - mad props on this.
The AR-15 style charging handle would be a huge downgrade to this left side charging handle. In my and many other opinions, It's the one thing that sucks with the the design, frankly. This design is better in every way. Having to pull the weapon away from the your sight picture to charge the bolt back sucks. This chassis can be kept on target while the non shooting hand can pull the charging handle back. Much more effective and superior.
I think you guys should do an open top removable slot from where the rear top of the gun for people that have a red dot on their pistol so then it’ll be really accurate
In case you haven’t found out yet go to this link, look for the part on the page that says “Fit Chart” www.recovertactical.com/product/p-ix-modular-ar-platform-for-pistols-for-glock/
@@WeGoneGetThisMoney when you line up sights, be they iron sights or an optic, you want them to line up with the point of impact at a certain distance. If gravity or wind push it off (let's say right and down) you would measure how far off from where the sights are aimed (zero) in either minutes of angle or mills. So say 2 mils to the right and 3 down means you would aim 2 to the left and 3 up to counter that. Usually when you put a new optic on or in this case put the gun in the frame, you'll have to realign the sights to match the point of impact. Some frames like the micro Roni tend to allow the point of impact to wander off because they're loose. I was hoping with this one that it would stay in place.
$200 for a clamshell "conversion"? its a novel approach to converting the glock but can you change butt stock or grip? are those items modular? i can see value in this if those parts are modular.
I still prefer the 2020. more compact and less moving parts. but hey, innovation rocks. my only beef would be that the trigger might suffer or be a little worse. hope it works out tho
In case you haven’t found out yet go to this link, look for the part on the page that says “Fit Chart” www.recovertactical.com/product/p-ix-modular-ar-platform-for-pistols-for-glock/
So what's the legality of it? It's not a firearm. It's not a brace or a stock. It's literally just a weird gun case. I'm sure the ATF will claim it's a stock or an SBR, but that's literally not what it is
You should send one of these to Matt @ Demolition Ranch. He'll run it through it's paces on some ridiculous targets, but give an honest review. (And the 10m Subs will see it)
I don't think it's a bad idea if you have a glock and don't want to buy a whole firearm or can't afford to buy one but you want a more stable weapon for home
I get your idea, but for it to have ANY accuracy, it would have to be a tight fit down to the millimetre. Maybe there could be different moulds for the exact part where the gun sits, but im afraid it would probably have to be very bulky to accomodate a wide array of pistols. And the trigger mechanism would also suffer heavily im afraid
I love my recover tactical 20/20. But with this, the company is doing a great job of not showing the ejection side at all, or how the trigger pull and reset is. I wont purchase until I see.
We show it on plenty of videos, instead of making general know it all comments why don't you simply as a question? Check out our Instagram page for a lot more videos
im sorry i must have misheard. 199.95?
its basically an ar9mm without having to buy the upper and lower and whatnot.
the iciing on the cake is you just put in your threaded and it is now suppressor ready.
jfc. 199.95
Awesome platform for Glock and definitely budget friendly.
Now we need one for p80s!!
Yes! We def need 1 for P80s!
They have brace for p80s
@@lazygamer9725 right the 20/80..those are great! I was saying I hope they will make the PIX for p80s once demand is established.
@@scottplagmann3411 yeah well I'm still waiting on a brace for my favorite platform.... maybe few more years idk
It will work for p80
I look forward for a kit that this kit can mount into to turn it into a bullpup, and then for another kit to convert that kit to a normal setup, and then a super short, subcompact version that is CCW friendly
Lols
🤣
Yes for the bullpump,
Lol
glock 43x compatible ?
Can a 16” barrel be with this stock and the Glock 19 so it’s legal smegal pistol caliber carbine . . . and no paperwork? That would be the perfect enough home defense firearm for many of us.
You can use any size barrel you want
Hopefully a version for the Glock 20 is coming.
You’re speaking my language. I’ve got the 20/21 for my Glock 40 and it’s great for hog hunting.
Are they available in 45acp? For the glock 21 and the glock 30
Sadly, no. The only option for the 21 is their older brace, not sure about the 30.
What is I considered? Pistol, rifle, firearm?
Where was this booth at Shotshow? I completely missed you guys.
And pre-order placed. Can't wait for it to ship
Hey guys, this absolutely looks mad.
Would be cool if there would be an aluminum version, and an AR-15 style charging handle.
Other than that - mad props on this.
The AR-15 style charging handle would be a huge downgrade to this left side charging handle. In my and many other opinions, It's the one thing that sucks with the the design, frankly.
This design is better in every way. Having to pull the weapon away from the your sight picture to charge the bolt back sucks. This chassis can be kept on target while the non shooting hand can pull the charging handle back. Much more effective and superior.
@@-Tokay- I would agree, the bolt release is what redeems the AR charging handle, this design doesn't allow you to reach it.
Is there a way to lock the slide back without putting a empty magazine inside?
It doesn’t look like that is possible, the only external access I see is for the mag release, nothing for the slide lock.
@@deranathonarkantos6712 Deal breaker for me...
I think you guys should do an open top removable slot from where the rear top of the gun for people that have a red dot on their pistol so then it’ll be really accurate
omg im buying one does it work with a glock 19?
In case you haven’t found out yet go to this link, look for the part on the page that says “Fit Chart” www.recovertactical.com/product/p-ix-modular-ar-platform-for-pistols-for-glock/
I'd love to see how well it holds zero assuming that's just where the pistol lives now.
What’s hold zero ?
@@WeGoneGetThisMoney when you line up sights, be they iron sights or an optic, you want them to line up with the point of impact at a certain distance. If gravity or wind push it off (let's say right and down) you would measure how far off from where the sights are aimed (zero) in either minutes of angle or mills. So say 2 mils to the right and 3 down means you would aim 2 to the left and 3 up to counter that.
Usually when you put a new optic on or in this case put the gun in the frame, you'll have to realign the sights to match the point of impact. Some frames like the micro Roni tend to allow the point of impact to wander off because they're loose. I was hoping with this one that it would stay in place.
which glock modles dose this work for dose it work for a 10mm glock?
You said to slam it shut. Why sugar foot?
I have a legal sbr glock 19 gen 4. It is currently in a 2020 with stock and stubby VFG. Left handed shooter here, so what controls are lefty friendly?
nigga we count for 10 percent of the worlds population, they dont care about us but we lefties know we're superior humans
$200 for a clamshell "conversion"? its a novel approach to converting the glock but can you change butt stock or grip? are those items modular? i can see value in this if those parts are modular.
Grip yes
It takes any 1913 stock/brace, it just happens to have a buffer tube on
Does it work for a Glock 20 and 29??
I would love one of these for umarex glock 17 airsoft gun but I don't know if you ship to the UK as I would like to have one if I can
What model of glock does it fit
On the base version from 199$ the AR grip style in included in the kit?Thanks!
Yup
@@Recovertactical 👍🏻
Compatible With Compact Glock 26 & Glock 27?
How long do it take to come
This for a glock 17??
Dose it fit any gen of glock?
What is the trigger pull with this set up or is it for just "spraying ammo?"
Here are two videos showing off some tips with the trigger accuracy
ruclips.net/user/shorts9HEfMWTu1XY
ruclips.net/video/skrAnB-Uuts/видео.html
Does it fit a Glock23 Gen5?
Is the slide removable while the charging handle is attached
Yes
is it adaptable to glock 26
Does the stock make it a SBR????????
When do we get to see it in action? Send pne to your buddy Abner Miranda to test and evaluate!
does it work with a full auto switch?
for glock 26 ?
@ReCover Tactical Amazing price point on this. We need one for Polymer80's, too.
Will there be a model for m&p 9/40?
Where can I get this at the store?
Will it work for a p80 g17 build?
Will this work with p80 frames?
And with that stock you now have a SBR. 199 is not the only price you'll have to pay.
@Steve Sherman yeah, that's not how it works. As much as we'd love it to.
@Steve Sherman get puled over with one and film your interaction with the cops and let us know how that turns out 😀
Glock 45 gen 5 9mm?
I guess these aren't on the pistol brace ban because they are sbr's?
Not a brace to be found so a brace conversation is not relevant
Will this be able to be sold in CA?
We ship to all 50 states
@ReCover Tactical love you guys
Would be Interesting with a heavy reset trigger installed into the glock
Is this platform considered as an SBR?
Yes. With a stock. With a brace it’s a pistol.
No p80 model ? 😢
Any videos of this in action coming???
How is this not an SBR?
does it fit glock 19 gen 3s with a 10 rd mag?
Yes
Isn’t this considered a sbr and have to be registered at that point ?
We ship it with no stock, you decide how you want to proceed but in the basic configuration it is a pistol
@@Recovertactical even with that VFG mag holder?
@@SlavicCinnamonRollie556 sshh it's a "mag holder", not a vfg.
Can you change the buffer tube for a pic adapter?
Use a standard buffer tube thread so you can mount anything you want
Would you need a sbr form for the firearm since the chassis has a stock and not a brace?
You’ll still need the tax stamp. Btw remember to never ask the ATF questions like this.
@@ohlookallama2866 I hope your not an ATF agent lol
@@sneakysquirrel1990 I would never dishonor my family like that 🤣🤣😂 You’re good on my end
I’m definitely getting this
Can this be used with Polymer 80 frames ? Also does it have to be Oem style slide serrations to be able to use this ?
It says on their website GLOCK only.
Already checked nope
@@unknownalias5538 yea I might order one and just modify the gram to fit . Cause I know you can do that with the 20/20 kit
NEXT purchase...have the 2020 with my 19x inside and freaking love it. Gotta get more glocks apparently haha
I still prefer the 2020. more compact and less moving parts. but hey, innovation rocks. my only beef would be that the trigger might suffer or be a little worse. hope it works out tho
very nice how can i buy this one
How to order sir?
Any chance this is compatible with p80 frame and oem slide???
I kind of doubt it considering the difference in the grip angle of P80 frames vs their OEM Glock contemporaries.
@@deranathonarkantos6712 ya that’s what I was thinking too. Thanx for the input
Is the top pic rail polymer or metal?
I asked them on their website they said the whole thing is made of reinforced polymer I'm assuming that includes the pic rail
@@ronnguyen8287 Bummer....
@@pontiacmaniac2 yeah I'd wait until gen 2
@@ronnguyen8287 Id actually like one for a p80 frame......
Anyone know where I can find the barrel extension/flash suppressor they have on some of the pictures of these?
World wide Web
Will it take an p80 G19
No, Glock only
What Glocks are compatible?
In case you haven’t found out yet go to this link, look for the part on the page that says “Fit Chart” www.recovertactical.com/product/p-ix-modular-ar-platform-for-pistols-for-glock/
Thx for the link! unfortunately they don't have one that fits a Glock 21 😭
@@ashenwings3106 Maybe in a future model.
If that's not the neatest thing ever
how to buy, im from philippines
Are these still legal under the new dumb arm brace rules?????
This is a stock not a brace
@@Recovertactical So it is completely legal under all the new ATF rules???
@@jessebarnett4205 this has nothing to do with the new ATF rules
@@Recovertactical Okay TY. It is almost impossible to understand the ATFs new EXTREMELY vague new rules so I had to ask?
@@jessebarnett4205read this if you want to be more confused 😅www.recovertactical.com/disclaimer/
So what's the legality of it? It's not a firearm. It's not a brace or a stock. It's literally just a weird gun case. I'm sure the ATF will claim it's a stock or an SBR, but that's literally not what it is
Does it work on glock 26
No
Since the psa dagger is a glock 19 clone does anyone know if it will fit
Not a Glock so won't fit
Cleaning a smg🚫 cleaning a pistol😏✅
CA legal ?
now if they could make it for the m1911 and for the AF2011A1(which is just a double barrel m1911)
Brilliant!
Will a p80 Glock fit?
Sadly, that doesn’t seem to be the case, considering the difference in the grip angle.
@@deranathonarkantos6712 ik
I still think the 20/20 is better. That product is the best glock brace on the market.
Thanks, can't argue with you there, different strokes for different folks
@@Recovertactical what do you think about a k/micro version based off of the g26 platform?
@@Recovertactical the 20/20 needs the left side charging handle on this rig.
then bump stock it for recoil auto lol jk anyone see any cons to this? it looks super cool but... any cons?
looks awesome. do want
for glock 26 gen4
You should send one of these to Matt @ Demolition Ranch.
He'll run it through it's paces on some ridiculous targets, but give an honest review.
(And the 10m Subs will see it)
Run it through its paces? Doubt it. Garand thumb or Sage Dynamics maybe but demolition ranch? 🤣🤣🤣😂😂
Nice 👍👍👍
Make one for the p80 please...💙❤
whats so good about p80s? why not jus have a standard glock?
@@21exodus I wanted to test my skills by building one...
@@2bad4uxxtwobad4uxx2 oh word? i jus asked cus niggas be praisin p80s like the Jesus of Glocks
But… why?
I don't think it's a bad idea if you have a glock and don't want to buy a whole firearm or can't afford to buy one but you want a more stable weapon for home
I'd buy a 5.7 model
Glock 34?
Yup
$2000?
$199.95
Anyone know if these fit a gst-9?
No
@@Recovertactical ah thank you. I would guess the grip angle being the main reason since the gst isn't big like a p80
Does anyone think that's kinda of a kriss victor but cheaper lol.
Can yall make a universal one cause everyone dont run glocks lol make one for like a steyr l9 a2 mf or a beretta 92s
I get your idea, but for it to have ANY accuracy, it would have to be a tight fit down to the millimetre. Maybe there could be different moulds for the exact part where the gun sits, but im afraid it would probably have to be very bulky to accomodate a wide array of pistols. And the trigger mechanism would also suffer heavily im afraid
I love my recover tactical 20/20. But with this, the company is doing a great job of not showing the ejection side at all, or how the trigger pull and reset is. I wont purchase until I see.
We show it on plenty of videos, instead of making general know it all comments why don't you simply as a question? Check out our Instagram page for a lot more videos
@@Recovertactical This is a super innovative concept. Will y'all be producing any of these for the Polymer80's?
but why? lol
Meanwhile in Canada... were fucked.
No thank You.
Quit the games and just buy an ar-9..