⛐ Check out our Garage to see what tools we use and recommend: www.amazon.com/shop/worldmechanics ⛐ Subscribe and hit the notification bell by the subscribe button for new videos: ruclips.net/user/AutoRepairGuys ⛐ Our GoFundme Page: www.gofundme.com/auto-repair-guys
So, this worked or did you need the special bleed tool afterwards? I didn't hear you say there were no issues. Just to check for a couple days and add as needed.
Ok guys, I had to do the same thing to my Chevy except instead of messing with disconnecting the radiator hoses I had someone inside hold the idle steady ~2000 rpm while I had the overflow cap off, heater temp AND fan on high, and I would go back and fourth squeezing the 2 radiator hoses like you had there (input/output) and also topping off the overflow as needed. You'll know it's good when you feel the pressure in the hoses and the drivers says the engine temp is good and the heaters blowing hot air as well as the overflow remaining filled. Put the cap back on, tell your friend to get the hell out of the driver seat and take it for a quick 10 min spin!
can you come and help me fix my coolant leak here on My Porsche Cayenne s 2008 . There is no way I could find a skilled mechanic to help me solve it here. Better for me to let you use my car and share similar fixing work on and pay for your costs to come on board.
⛐ Check out our Garage to see what tools we use and recommend:
www.amazon.com/shop/worldmechanics
⛐ Subscribe and hit the notification bell by the subscribe button for new videos: ruclips.net/user/AutoRepairGuys
⛐ Our GoFundme Page: www.gofundme.com/auto-repair-guys
Thanks for this! Just curious about what the risks might be for doing it this way versus the recommended vacuum method, which seems super complicated?
Except, always use distilled water, not that nasty tap water with corrosive minerals that will trash out the aluminum.
Where are you guys located>? Do you do private work on vehicles? like a mechanic?
It is better to spend $90 to buy a vacuum tool. It saves you time.
Great detailed Video. Great work on the Cayenne coolant drain & fill
So, this worked or did you need the special bleed tool afterwards? I didn't hear you say there were no issues. Just to check for a couple days and add as needed.
Ok guys, I had to do the same thing to my Chevy except instead of messing with disconnecting the radiator hoses I had someone inside hold the idle steady ~2000 rpm while I had the overflow cap off, heater temp AND fan on high, and I would go back and fourth squeezing the 2 radiator hoses like you had there (input/output) and also topping off the overflow as needed. You'll know it's good when you feel the pressure in the hoses and the drivers says the engine temp is good and the heaters blowing hot air as well as the overflow remaining filled. Put the cap back on, tell your friend to get the hell out of the driver seat and take it for a quick 10 min spin!
I am from dubai i am Mechanic same car in my garage I change radiator and thermostat valve heat going up what should I do i like your job way
Hi I wondering why you change those metal pipe if the update already done from rubber hose to metal pipe, please get back to me asap
Thanks guys was really helpful keep it up 👍
Can you do it for the touareg?
Is the water you use distilled?
Hi My Friend i Have a Cayenne GTS 2017 and how i bleed the Coolant in this GTS Please
I Change the Plastic Cooling Pipe that is to head to head and I don’t know how to bleed this Cayenne GTS
Top !!!!! Thanks a ton . I dont know why i got the feeling you are Bulgarian?
BOM
did these guys just use tap water! if so thats a no no....
Sani
Wasted my time on this video. You did not show the bleeding at all.
Why not.. the system was open from all sides .. then when he filled with coolant.. the air supposed to be pushed away
can you come and help me fix my coolant leak here on My Porsche Cayenne s 2008 . There is no way I could find a skilled mechanic to help me solve it here. Better for me to let you use my car and share similar fixing work on and pay for your costs to come on board.
This is not how you fill the coolant on a Cayenne. How are you bleeding the air from the system?
You should be using a vacuum bleeding system
Dear Auto Repair Guys -- Do you have whatsapp number? I want to do video call and get your advice on my porsche cayenne S 2004 v8 4.5