Это видео недоступно.
Сожалеем об этом.

How to fix abs/ traction control kicking on randomly

Поделиться
HTML-код
  • Опубликовано: 12 фев 2023

Комментарии • 46

  • @alansmithy85
    @alansmithy85 7 месяцев назад +10

    Had no clue this might be the issue! 😮🤔 I know what I'm double checking with every brake pad change from now on... Very informative thanks OP.

    • @ProZacksProjects
      @ProZacksProjects  7 месяцев назад

      No problem and I was completely surprised

    • @dancurrier6421
      @dancurrier6421 Месяц назад

      what kinda car is this. I took my wheel speed sensor out of my 2016 Chevy Traverse Lt AWD there's no gears. that I see when putting a light down the hole where wheel speed sensor was on my chevy traverse Lt AWD it goes right to the CV Shaft. I'm wondering if I didn't clean enough rust off the CV Shaft for it to get a correct reading because I replaced wheel bearing and both front wheel speed sensors and still lights on for ABS and service traction control and stability lights are on the dashboard any help would be appreciated ty

  • @whatsupky
    @whatsupky 3 дня назад

    I recently change all 4 wheel bearing for my rwd car. However, the rear sensors had to be replaced due to being seized to my wheel bearing. Everything works when put back. However, my car is triggering the Trac control and brakea when my car is in reverse mode and the steering wheel is turned all the way to the left or right. Do you know what it might be? Bad sensor in the rear or the front wheel hub? there is no light on dash and all wheel sensor seems to be reading ok.

  • @louieharrison9869
    @louieharrison9869 8 дней назад

    Help with abs problem on my chev sonic ,on start up my brakes jumping on my pedal but drive afew mters light goes on and its ok

  • @twin3721
    @twin3721 15 дней назад

    I have a 2007 Chevy avalanche and my track control and stabilitrak sensor comes on so then when I start driving it jolts and also when I step on the break, it shakes inside the cabin so what do I do?

  • @ephraimcamacho9600
    @ephraimcamacho9600 4 месяца назад +1

    Thanks for your video! My next job😂😂😂

  • @EagleNestApiaries
    @EagleNestApiaries Год назад +4

    That hand looks familiar. Do you also model men’s watches?

    • @ProZacksProjects
      @ProZacksProjects  Год назад +4

      Is it the hand that appears in your dreams and chases you with a men’s watch?

    • @cyphersoldier
      @cyphersoldier 10 месяцев назад +1

      😂🤣🤣

  • @jimmywilson1388
    @jimmywilson1388 26 дней назад

    Man, please tell me this is all that’s wrong with my escape… Mom literally just gave it to me and I love it… It’s the limited with all the bells and whistles… Thanks for the advice.

    • @ProZacksProjects
      @ProZacksProjects  18 дней назад

      I hope that’s all. Sometimes the yaw rate sensor acts funny and that can cause some similar symptoms

  • @davidr866
    @davidr866 18 дней назад

    I’ll give er a go.
    2011 Enclave after starting engine, ABS Traction Control and Power Steering lights all come on.

  • @keezymoney8546
    @keezymoney8546 3 месяца назад +2

    similar to others in the comment section my car will go into "limp home" mode when driving, immediately throttles my engine and throws on the engine and traction control light...do you suggest trying this and seeing if that clears the issue?

    • @hharder6384
      @hharder6384 3 месяца назад +1

      I had similar problems with 2007 Pontiac was a dirty throttle body and what ever sensor is inside there. Cleaned it up and worked fine after.

    • @dainfinite1co178
      @dainfinite1co178 2 месяца назад

      My truck just starting doing it today. Do I need to clean or replace the sensor

    • @keezymoney8546
      @keezymoney8546 2 месяца назад

      @@dainfinite1co178 I replaced my battery and the issue went away....the low voltage was causing the transmittion to shut down while driving

    • @kevindufur1194
      @kevindufur1194 Месяц назад

      Crankshaft positioning sensor is more likely your issue keezy

  • @tigerconway
    @tigerconway Месяц назад

    i am having this problem will try thanks for posting

  • @christinathomas6283
    @christinathomas6283 27 дней назад +1

    Hi, my Nissan sentra loses power. Cvd randomly comes on, and the car won't go over 10 mph. When this happens, i have to let the car rest before it will drive normally again is this the same thing?

    • @ProZacksProjects
      @ProZacksProjects  17 дней назад

      I think that’s a transmission issue. You might need to get that checked out.

  • @JasonLee-lv7tm
    @JasonLee-lv7tm 3 месяца назад +1

    Did you have an ABS speed sensor code?

  • @user-tz7qi7xj2i
    @user-tz7qi7xj2i 10 месяцев назад +1

    hello my japanese suzuki alto 2015 sometimes randomly apply brakes and accelerator not responding during left turns while driving and even the traction control light does not show on dashboard. today i even tried to take sharp left turn while turning tcs off but still it does the same and when i apply accelerator the engive revs but its like the car itself got into neutral and this behavior is only for 1 or 2 seconds

    • @23_Kamal
      @23_Kamal 3 месяца назад

      Brooooo this happening to me what did u dooooooo

    • @JasonLee-lv7tm
      @JasonLee-lv7tm 3 месяца назад

      Get rid of the Suzuki
      They don’t even make cars anymore

  • @1Prolific
    @1Prolific 5 месяцев назад +2

    Yeah I’m having this problem but with only traction control randomly Turing on and making the car feel funky kinda like not giving full power then when turn off feels normal when I get it off it’s a doge I have to manually turn off by holding traction and power button to get it off

    • @ProZacksProjects
      @ProZacksProjects  4 месяца назад +1

      Often times, it cuts power to reduce the loss of traction or it lightly hits the brakes on certain wheels to try and keep the car straight. There’s a chance it’s the yaw rate sensor.

  • @shannonhawkins5739
    @shannonhawkins5739 Месяц назад

    What vehicle is this for? I have a 2011 Honda pilot that keeps throwing a check brake, check abs and vsa light on and off randomly.

    • @ProZacksProjects
      @ProZacksProjects  Месяц назад +1

      This is for a first gen Toyota Sequoia but the sensor work the same way. They’re magnetic and if anything sticks to them, they won’t work right.

  • @barryrawlings7592
    @barryrawlings7592 2 месяца назад

    this has just happened on my bmw 116 d sport brakes just randomly sticking on

  • @chyloh3558
    @chyloh3558 4 месяца назад

    Hi bud i got a 2010 l200 triton if i leave it running less then a minute the traction control lights both come on check engine light abs then goes into limp mode but if i turn it off then on and drive of straight away its fine

    • @JasonLee-lv7tm
      @JasonLee-lv7tm 3 месяца назад

      Cool, are you gunna ignore it or fix it

  • @beaudil1905
    @beaudil1905 4 месяца назад +1

    My traction control turns off randomly do you have any clue why and how to fix it

  • @alankennedy5759
    @alankennedy5759 23 дня назад +1

    This only happens when I take a sharp corner...then the abs and traction control lights go off again 🤔

    • @ProZacksProjects
      @ProZacksProjects  18 дней назад +1

      That could be the yaw rate sensor. You might look into that.

    • @devbhardwaj6387
      @devbhardwaj6387 6 дней назад

      Always check ur wheel bearings

  • @MatthewLacrette
    @MatthewLacrette 21 день назад +1

    Couldn’t you just vacuum it out?

    • @ProZacksProjects
      @ProZacksProjects  18 дней назад +1

      Not really because it’s a strong magnet and it takes wiping it off to remove the debris.

  • @kamariusepps9079
    @kamariusepps9079 7 месяцев назад

    What car it’s this on

  • @nicholaslandolina
    @nicholaslandolina Месяц назад

    Just vacuum ot

  • @jayjb833
    @jayjb833 9 месяцев назад +2

    Spray the gear off

    • @ProZacksProjects
      @ProZacksProjects  9 месяцев назад

      That would be smart. Thanks for the tip. 👍