365 has had the strangest evolution of a handgun I've ever seen. It started out stuffing as many 9mm rounds possible, in the most thin and compact handgun possible. Now its a full size handgun lol.
Micros were just a fad and people started going back to larger guns that perform better. Sig just followed the trends and many companies are following Sig. But you can stick with your itty bitty 365 if you want to, I like the slim compact and full sized frames better
@@curtismorgan4394 the size if my 220 or 226 makes me feel more at home than these new fruit stand security detail cat sigs. I bought an xl when they first came out and I hated it then hate it now but the aluminum frame helps me feel an itty bit better. Macro is ok but still not my cup of bourbon.
Yep. I think it’s because of the disaster the p320 has been. They want to sell a full size that people will actually buy because they’re worried about 320s going off on their own or when reholstering.
@@RUclipsflakeland if I was gonna guess I would guess that Sigg is going to discontinue the regular 320 lineup and keep theM17/18‘s for the military, that’s the only thing that really makes sense
I have the Arex Delta and I switched to the 365 for a few reasons. 1. The Arex has multiple hard edges, I had to dremel the snot out of it to get rid of multiple hot spots. 2. I broke three strikers already on the Arex. So, I don’t trust it. 3. The trigger shoe itself gives me hot spots (hard edges). 4. The 365 is a little slimmer and lighter. 5. 365 has better aftermarket support. 6. America! the 365 is made here. 7. The 365 optic system is superior to a plate system. I wanted to love the Arex Delta. I purchased 15 mags, two holsters, and even a back up Delta, as to make it my permanent EDC, so it really hurt $$$ to switch, but the 365 is just a better platform with more longevity. Slovenia should have focused more on function over form and stop using MIM firing pins. It’s crazy that 500 rounds breaks the striker consistently. I broke 3!
I can't believe it.. you covered EVERYTHING I was looking for to try and build my icarus precision p365 ace fuse frame! Lol. I couldn't figure out how to order the slide, barrel size etc...is it am xl..or x macro..xl plus..etc?! Lol thank you!!
Did your EPS Carry come with the correct screws for this setup? I recently purchased a 365 Fuse and on my sample the slide has larger M4 screws that were not included with EPS Carry. Awesome review ordering one your holsters for this. My XMACRO has been in one of your holsters for over a year now and I love it
I love your holsters. I am thinking about getting a P365 but don’t know if I want the Fuse or the Tacops. The frames seem the same, and the only difference seems to be a smidgin of barrel length . I like the night sights that come with the Tacops plus the four magazines that come standard. I am not a fan of the fiber optic sight on the Fuse, so although I like the extra barrel length, I don’t want to have to swap out the sights immediately upon buying the pistol.
Naming is strange but what they are doing is undeniable. Legos for grown men. I have 4 of these now and always enjoy building. Best thing is interchangeable mags throughout my system, now with 21s.
I can't wait for the Legion version of the Fuse next year.
Next week* hahaha kidding
Just throw the fuse slide on the 365 AXG Leigon frame and BOOM there is your Fuse Legion
365 has had the strangest evolution of a handgun I've ever seen. It started out stuffing as many 9mm rounds possible, in the most thin and compact handgun possible. Now its a full size handgun lol.
Micros were just a fad and people started going back to larger guns that perform better. Sig just followed the trends and many companies are following Sig. But you can stick with your itty bitty 365 if you want to, I like the slim compact and full sized frames better
@@curtismorgan4394 the size if my 220 or 226 makes me feel more at home than these new fruit stand security detail cat sigs. I bought an xl when they first came out and I hated it then hate it now but the aluminum frame helps me feel an itty bit better. Macro is ok but still not my cup of bourbon.
Yep. I think it’s because of the disaster the p320 has been. They want to sell a full size that people will actually buy because they’re worried about 320s going off on their own or when reholstering.
@@jakem4579 that makes more sense than all of the other sh!t I've heard.
@@RUclipsflakeland if I was gonna guess I would guess that Sigg is going to discontinue the regular 320 lineup and keep theM17/18‘s for the military, that’s the only thing that really makes sense
I have the Arex Delta and I switched to the 365 for a few reasons. 1. The Arex has multiple hard edges, I had to dremel the snot out of it to get rid of multiple hot spots. 2. I broke three strikers already on the Arex. So, I don’t trust it. 3. The trigger shoe itself gives me hot spots (hard edges). 4. The 365 is a little slimmer and lighter. 5. 365 has better aftermarket support. 6. America! the 365 is made here. 7. The 365 optic system is superior to a plate system.
I wanted to love the Arex Delta. I purchased 15 mags, two holsters, and even a back up Delta, as to make it my permanent EDC, so it really hurt $$$ to switch, but the 365 is just a better platform with more longevity.
Slovenia should have focused more on function over form and stop using MIM firing pins. It’s crazy that 500 rounds breaks the striker consistently. I broke 3!
I was referenced at 1:42 ❤
I wish they would have kept the slide you have as it looks way better imo. Thanks for the review! P.S. if you want to sell that slide let me know.
Hahaha nah it's a special one
I can't believe it.. you covered EVERYTHING I was looking for to try and build my icarus precision p365 ace fuse frame! Lol. I couldn't figure out how to order the slide, barrel size etc...is it am xl..or x macro..xl plus..etc?! Lol thank you!!
keep checking gun broker. there was recently a complete slide for the fuse, the same seller has complete lowers including fcu.
Did your EPS Carry come with the correct screws for this setup? I recently purchased a 365 Fuse and on my sample the slide has larger M4 screws that were not included with EPS Carry. Awesome review ordering one your holsters for this. My XMACRO has been in one of your holsters for over a year now and I love it
it did
They can’t call it the xmacro fuse because they will come out with a version that is ported or comped and then they will call it the xmacro fuse
Lol
I love your holsters. I am thinking about getting a P365 but don’t know if I want the Fuse or the Tacops. The frames seem the same, and the only difference seems to be a smidgin of barrel length . I like the night sights that come with the Tacops plus the four magazines that come standard. I am not a fan of the fiber optic sight on the Fuse, so although I like the extra barrel length, I don’t want to have to swap out the sights immediately upon buying the pistol.
FUSE is better
@@ANRDesignLLC Thanks.
Picking one up gonna get a tlr 7 sub or hlx light and my eps carry sitting in my safe
You said to buy a fuse holster for a xmacro for better conceal-ability. Does that also include if I have a tlr7 sub on my macro?
yes
Yeah i 2nd the wanting the slide 😅 😊 i prefer this prototype fuse its just a giant 365xl
Hahaha same slide man! Just less cuts all over ot
Which headset/hearing protection is that he's wearing?
Opscore AMP
Love you alexxxxxxxxxx
I peeped that 16570 E2 before anything else by a mile
Is the recoil spring different than the XL slide?
yes
Why is this fuse slide simple like the 365xl slide without the special maching cuts?
Pre production slide
Any good holster for the fuse?
we make em anrkydexholsters.com
All I want is the slide and barrel 😮💨
Same
What did you use to shave off the thumb ledge?
He said he milled it. So, he probably used a bridgeport style mill with a small helical endmill like .250" or even .125", something like that.
This
Is that broperator behind the camera?
Lol no
Do you have tlr 7hlx and fuse holsters?
Yes
...but it's the SIG P365 Xmacro...I don't understand the argument at the start of this video.
There's no argument. Explanation of what it is. It's a long slide xmacro
Sig has turned into Glock, they’re naming pistols makes no sense, and now they’re just making variations of the same pistol
Facts
At least Glock just throws numbers at a board instead of conflicting names with other products.
Naw that Sig marketing budget is unmatched
I heard it means fu springfield echolan
Naming is strange but what they are doing is undeniable. Legos for grown men. I have 4 of these now and always enjoy building. Best thing is interchangeable mags throughout my system, now with 21s.
Could be worse. They could be naming tips from Springfield.
The frame dictates the name of the gun? Weird logic man.
No I think the xmacro should have been the p365 M
Someone needs to do some weed eating.
Yeahhhhhh waiting for a nice day
@@ANRDesignLLC I know how it is. I have a small kudzu patch that is on the verge of getting out of control if I don't get to it in time. 😂
Sig trying compete with that Glock48 🫡✔️🤣