please make the 226 and 365 in ambi controls.As a lefty I want these guns, but I need a slide release. You graced us with the P320, and the MCX, but do us a solid on the 226 and 365 please. Sure we are less then 15% of shooters, but doesnt mean we should be left out
I'd like to see SIG USA reach German QC standards again. Your Customer Service is exceptional (love the guys really!)l, however, short-cuts in CQ, slide finishing etc. has been concerning. Can we also get a P320 SXG in a "Carry" size, and, the P226 X-Five series in a "Short" version (incl. Legion series).
@@basementality4924 all the 365 do it with the MAG out, always have. all four of mine did & do it. put in a mag & it stops for me. 1k on 2 & little over 400 in other.
Sig Sauer has grown exponentially with the military contracts. QC is a culture; every employee needs to be involved in QC and be able to pull a gun. But they are producing thousands a months in various configurations,
That's exactly what it is.. Did u not know that's literally what every big corporation does? U should watch the Republican National convention, they openly shame poor people and admit they plan on passing legislation to benefit the people in that room exclusively
I'm confused about the difference between 6.8x51 and .277 SIG Fury. SIG is using BOTH nomenclatures on their website. Is this akin to .223 vs 5.56? If so, then any pressure and/or chamber dimension differences need to be published.
It is comparable to 5.56/223. 6.8x51 is the military nomenclature of course. The .277 will not have the pressures of the 6.8x51. In fact, the military won’t even be using the high pressure ammunition in training scenarios to keep wear and tear on the firearms to a minimum.
The Spear should have always been ... a piston bufferless MONOLITHIC AR upper with ambi side charging handle ... for both an AR & Bullpup lower . And this upper has a wide handguard .. with a pistol port ... for 10in barrel with a suppress housed within the guard. And when sign offered the Spear to the Army ..... there would be an option for their AR lower ... and a bare bones or tricked out BULL PUP lower. And for the civilian market they could even offer a Steyr AuG lower for fans.
TOM TAYLOR THIS U.S. MILITARY/MARINE VET has your back and endorse's this vid n content 1 million % cool ! , may god bless our military troops and u.s. vets , thanks > tom !
Might not be possible being hammer fired all the lower internals and still have a decent mag capacity probably go backwards in that sense to like 10ish rounds
They have multiple engineers making 6 figures. Lol, I believe in them. The p226 magazine fits into the g43x mag well. It can be done. They can use titanium for the docker to make it slimmer or redesign the decocker and it's location entirely. They can also take inspiration from the Wilson EDC to redo their grip panels. Making the grip area even slimmer. I've been wanting a da/sa slim compact for over 2 years now and no one has made it yet. I firmly believe this can be done.
@@isaudy I like your way of thinking. I have a p365xl and still eyeballing a p239 or p225. If they could combine the best of both into one gun I’d be all over it.
I use handgunhero to compare these weapons. The CZ p01 will make a better fit than those two platforms. Especially when you use vz thin grips and goon tape. 1.25 inch width. Still a beefy system. Difficult to AIWB carry with a suit on or summer attire. I firmly believe if they give us that platform, a 229 slim, 1.1 inches, 15 round capacity, 3.7-4in barrel, legion interals, it'll sell like crazy.
Excellent video. One small suggestion. Most of the human race has less than perfect eyes and the vast majority of those see green dot reticles better. Talk to a couple eye doctors, you will find that I am correct. Offer your dot sights and illuminated reticle scopes in green as well as red, please.
Green for a lot people based on their astigmatism can cause star bursting and or just disappear. Yes the eye has a larger eye spectrum of green blue being the biggest it can get lost outside with greenback drops. I’m not saying you’re wrong at all. Probably easier for a lot of people. That has just been my experience. Larger dots expanded can do the same for that bursting. I had an eye injury and it really didn’t affect my normal vision to much but at I see big star biters around red lights. But on the day not as much as green.
Cool.. Now make an optic that that cycles through all those reticle options.. i want the circle dot, the 3moa and the 6moa option all in 1.. Until then ill just stick with the Holosun eps carry >
Will they offer the upper or conversion kit for the 277 spear? I've got the 308 version and I'm not buying another full rifle when a simple conversion will work. Also, what is the difference between the 6.8 suppressor and the 308 suppressor?
(Comment removed somehow probably yt censor crap) I enjoy traveling, but being disarmed is not pleasant. California is sad state for edc and self defense. Some states could become like california if we let them. Happy 4th of July and i don't like the corrupt politicians and people tell kids you can identify yourself as a pancake or whatever. I love the 4th of July but not those who try to destroy us. SIG SAUER could use some logic with the magazines cause the 15rd mag is the same length as the 17rd mag and sig could easily do a 13rd or 14rd flush magazine for the p365 xl instead 12rd mag and shorten the 15rd mag to be smaller than the 17rd mag. Why would anyone want an 15rd mag that is the same in height as the 17rd mag? Sig do better work for p365 series especially the xl and the original could squeeze some rounds in and the quality on the mags are not the same as the 17rd x macro mags. Lifes could be saved with these. That's why we need an international 2 amendment right 🦅.
C'mon Sig. You would have worldwide adoption of the 277 Fury .. if it was designed for the Spear LT ( an AR) with the 18 in barrel giving close to 6.5 CM range & BC ... with only a 50% increase in weight. More so ... if the Spear was designed as an bufferless, piston monolithic AR15/10 upper with ambi non reciprocating side charging handle with 9, 13, 16, 20 in barrels ... for both an AR & bullpup lower. The 6.8 CC ... should have been a high pressure, high BC ... AR cartridge that is significantly better than the 5.56 as a DMR or SAW and could replace the 308 for the LMG ad SPR/DMR.
I hate seeing the "Assembled in USA" stamped onto Sig products... It should be MADE in USA. Assembled is a play on words... You have to do almost nothing to the product to make the claim that it's assembled in the USA. Put a battery in it and pack it into a box... "assembled"
You wanna know what you actually “need” to do? Faze out the 320 and use 365 FCU’s in redesigned 320 frames and slides that accommodate the 365 FCU. That lawsuit you just lost isn’t gonna get you a bunch of sales, especially with all of your overpriced options.
@@defilade1066 trust me lol I’m not a Glock fan by any means. Terrible ergonomics and economics plus nothing has changed in 30 years. They’re far behind the pack leaders in my eyes.
@@johnc5330 the P365 has been the highest selling gun for the last two years straight in the United States 🇺🇸 being the same gun since 1992-1993 is the ONLY thing Glock has going for them. If they had came out 5 years ago, they wouldn’t be the “king” of anything except bad triggers and horrible grip angles 🤣 I bet if some of the other newer companies had been around since the early 90’s then people wouldn’t give so much unjust love to Glocks 🤷🏻♂️ that’s just the facts. Government contracts are the only thing that has kept Glock around this long but it’s also what drives up the cost of a very cheap pistol to make. So many better options these days
@Bryan-1980 there's more glocks in circulation hence more chances for an accident was my point. If you can't shoot a glock trigger you just flat out suck as a shooter, let's be honest. I've been there and done that with more sig guns than I can remember owning to be honest. I get a 50% discount. Sig is nothing special. The only 2 things I have left from them is a 365 xmacro and a sr556 qd suppressor.
One day I may try a sig but right now I just have to many bad ass guns that have great warranty and great qc unfortunately sig has had the chance to fix things and make things good with people that have bought there products that they could give shit less about
As a Sig fan and lifelong NH resident, I rate this show a meh out of 10. edit: The MCX is cool but change the color from that ugly bronze/tan. The virtus color was perfect.
take things other companies have been doing for years and call it yours -- gimmicky constant "we changed one thing" new variation rollout -- skimp on quality control and charge double -- the marketing woo is absurd for anyone with a brain
Sig has lost its way……. When Sigg was in Germany, they had awesome products now just plastic junk, and of course they have to sell ammo and Optics and all the other stuff they shouldn’t even be producing. Stick with being a gun company but going back to stuff that is not some junk.
Increased pressure in the ammo for extra performance? 😂😂😂😂. Go look at military arms channel, he literally compares 2 cartridges where the only difference was pressurization. One was a more pressurized version of the other, the difference in performance was less than 1%. AKA False promises
Fudd nonsense. The 6.8x51 cartridge pushes 3000fps out of short 10 inch barrels in the 113 grain load. You 5.56mm fudds think that just because thats what we use now it's what we'll always use. I look forward to the days 5.56 is looked at in the same lense as we view the ancient 30-06 round.
So, the military arms channel was testing the brand newly released sig rounds? Or, are you predicting the performance of the new sig ammo based on their design testing ? Or, is it something else you are expressing, with or without hands on experience ? Don't mind me waiting for sig's performance data before making any claims as to it's accuracy and replication.
Unbelievable the shameful way people dress and groom themselves, if at all. Seems like beards and tattoos is the in thing. Sig Sauer use to have class..... Unfortunately they went the way of the clown's. Stay safe and Pure 🙏👌 Live a life of honor and morality 🙏
So Lizza, what did you think of the products being presented? Just wondering if you are one of those of whom own a firearm. Btw, beards in the military were recommended to those stationed in the mid-east and tattoos have a long standing tradition in the military. In fact, being in the military without getting a tattoo speaks more to the person's job: carrying a weapon often tattoo'd, while doctors, clerks, etc probably not. Just thought you might want to know before questioning their honor because every presentor either works tirelessly to provide the best military fighting tools possible or have served in the military or both. Did you listen to the intro description of these folks ?
@@hitman_s1 Is that a thing? Plenty of people express themselves through dress and appearance. Kind of the point with fashion. I suppose you can make plenty of rational generalizations from it but morality and character are likely not them.
Sig, the only company I know that can remove the hammer from the 250 then turn around and call it a 320 and call it innovative but the engineers were either inept or lazy and managed to make a flaming turd that is so good at self defense it shoots itself, hope your insurance company doesn’t dump over the lawsuit you just lost and tons of others you are probably going to lose.
The P320 kept design similarity to the P250 in many areas to keep the same magazine and grip module capability. Much more efficient that more propriety parts for the P320. How the hell is this a bad thing ? Re drop fire, Glock Smith, Ruger, Taurus, Walther, even Beretta had a drop fire issue with one of their models at some point. Love your double standard.
@@great_deception it wasn’t “many areas” it’s literally the same gun, same frame, same fcu except whoever decided to remove the hammer didn’t think to redesign the the striker, a p320 striker is fully cocked and locked, and with no external safeties like a trigger dingus, that means it’s highly likely to go off with a bump to the trigger or the internals, whereas on other striker fired pistols, pulling the trigger completes the cocking of the striker. And the biggest difference between everyone else’s drop issues and sigs? They all admitted to it and told people what they did to fix it, sig blames everyone else and won’t even tell people the updates they do their pistol. Of course, now they can’t admit in public they fixed a problem they for years denied existed because besides making them look stupid, it would force their insurance company to pay millions in claims.
@@johnhatchel9681 awwww look at you! You thought you be smart and come on here talking trash and don’t even know how firearms work 😂😂😂 To bad “smart” people like you don’t even realize that when teams deploy they ditch their sigs and go with Glock, but I’m sure you knew that? Because I’m crying because sigs got that contract?😂😂😂😂 oh man, wait until you find out what happened with sigs new fancy expensive rifle “got the contract”😂😂😂😂😂😂😂
![KSI - Thick Of It (feat. Trippie Redd) [Official Music Video]](http://i.ytimg.com/vi/At8v_Yc044Y/mqdefault.jpg)
please make the 226 and 365 in ambi controls.As a lefty I want these guns, but I need a slide release. You graced us with the P320, and the MCX, but do us a solid on the 226 and 365 please. Sure we are less then 15% of shooters, but doesnt mean we should be left out
We have firearms keynotes now?!😂
Like I’m watching WWDC
It's ok... not great but st John is cool
Marketing works.... lol
I'd like to see SIG USA reach German QC standards again. Your Customer Service is exceptional (love the guys really!)l, however, short-cuts in CQ, slide finishing etc. has been concerning.
Can we also get a P320 SXG in a "Carry" size, and, the P226 X-Five series in a "Short" version (incl. Legion series).
The play in the slides that develop on the 365 legions are very concerning considering their price.
@@basementality4924let alone the lack of complete finishing of the frame and slide. Unacceptable.
@@basementality4924 all the 365 do it with the MAG out, always have. all four of mine did & do it. put in a mag & it stops for me. 1k on 2 & little over 400 in other.
Be dope to get the gas peddle takedown from the X-five 226 & maybe a "strategic port slide" on the all metal P320, no?
Sig Sauer has grown exponentially with the military contracts. QC is a culture; every employee needs to be involved in QC and be able to pull a gun. But they are producing thousands a months in various configurations,
Professional tip for Sig:
MOAR LENA!
Thanks for attending my ted talk
Yeah, more Lena and Max, less Tucker
Meh, she's Jerry in heels. Kinda gross.
Thank you all for the great work & keep it up 👊🏻🇺🇸
Keep up the good work, Sig ! Many people are counting on you !
This was interesting right up till the part you gave Tim Kennedy the microphone. You guys can do better.
This whole video feels like a bunch of corporate executives patting themselves on the back.
It is
That’s because that’s what it’s intended for…
@@awdobsession717 someone seems upset he wasn’t invited to the company executive suck off session
That's exactly what it is.. Did u not know that's literally what every big corporation does? U should watch the Republican National convention, they openly shame poor people and admit they plan on passing legislation to benefit the people in that room exclusively
Sig Circle jerk
Great job guys thank you!!
Like that little P365 Fuse.
Sig does some amazing things with their gear and firearms.
Why aren’t the Romeo-X Enclosed Compact and Romeo-X Enclosed Pro available in FDE? 51:57 @SigSauerInc
still waiting for a double stack P220 and a P938
They made a double stacked P220 it was the P227
P227 double stack 👍
227. If you have a 220 Super Match, then you have a 10rd double stack long slide 220.
I'm confused about the difference between 6.8x51 and .277 SIG Fury. SIG is using BOTH nomenclatures on their website. Is this akin to .223 vs 5.56? If so, then any pressure and/or chamber dimension differences need to be published.
It is comparable to 5.56/223. 6.8x51 is the military nomenclature of course. The .277 will not have the pressures of the 6.8x51. In fact, the military won’t even be using the high pressure ammunition in training scenarios to keep wear and tear on the firearms to a minimum.
meh Tim Kennedy. Used to be a huge fan since the strikeforce days but sad to see him here
Right! My thoughts exactly! They should've gotten a better ambassador.
I am an Sig fanboy! Keep up the good work!
Nice clean presentation from all the presenters! 😇😄👏
wow, that's awesome way to host an event. great stuff gents
BRING BACK PARTS FOR THE 550/556 RIFLES!
Amazing! I'm excited for absolutely everything
nicely done SIG.
I sure hope they fixed the glass quality on the romeo x. It doesn’t take too much to scratch the front lenses up or crack it from a drop test
I wish I was there!
Great video!!!
I like the 365 Fuse, I kinda want one
Wow!
Great company
I wish Sig would drop/ come out with a “15 Handguard for the spear LT!! An one for the Spear
The Spear should have always been ... a piston bufferless MONOLITHIC AR upper with ambi side charging handle ... for both an AR & Bullpup lower . And this upper has a wide handguard .. with a pistol port ... for 10in barrel with a suppress housed within the guard.
And when sign offered the Spear to the Army ..... there would be an option for their AR lower ... and a bare bones or tricked out BULL PUP lower. And for the civilian market they could even offer a Steyr AuG lower for fans.
good show
TOM TAYLOR THIS U.S. MILITARY/MARINE VET has your back and endorse's this vid n content 1 million % cool ! , may god bless our military troops and u.s. vets , thanks > tom !
Give us a 229 slim model. 1.1 inch width across. It WILL sell like wildfire.
Agreed!
Might not be possible being hammer fired all the lower internals and still have a decent mag capacity probably go backwards in that sense to like 10ish rounds
They have multiple engineers making 6 figures. Lol, I believe in them. The p226 magazine fits into the g43x mag well. It can be done. They can use titanium for the docker to make it slimmer or redesign the decocker and it's location entirely. They can also take inspiration from the Wilson EDC to redo their grip panels. Making the grip area even slimmer. I've been wanting a da/sa slim compact for over 2 years now and no one has made it yet. I firmly believe this can be done.
@@isaudy
I like your way of thinking. I have a p365xl and still eyeballing a p239 or p225. If they could combine the best of both into one gun I’d be all over it.
I use handgunhero to compare these weapons. The CZ p01 will make a better fit than those two platforms. Especially when you use vz thin grips and goon tape. 1.25 inch width. Still a beefy system. Difficult to AIWB carry with a suit on or summer attire. I firmly believe if they give us that platform, a 229 slim, 1.1 inches, 15 round capacity, 3.7-4in barrel, legion interals, it'll sell like crazy.
Love it!
Nice
Nice!
The 226 x5 reserve would look great in chrome and black all steel
Bereli has Ranger 9mm 115gr +P+ currently ON SALE w/FREE SHIPPING.
Thank you for sharing.
With your customers, but not your members. Thanks, Sig.
Cool
nice
Excellent video. One small suggestion. Most of the human race has less than perfect eyes and the vast majority of those see green dot reticles better. Talk to a couple eye doctors, you will find that I am correct. Offer your dot sights and illuminated reticle scopes in green as well as red, please.
Green for a lot people based on their astigmatism can cause star bursting and or just disappear. Yes the eye has a larger eye spectrum of green blue being the biggest it can get lost outside with greenback drops. I’m not saying you’re wrong at all. Probably easier for a lot of people. That has just been my experience. Larger dots expanded can do the same for that bursting. I had an eye injury and it really didn’t affect my normal vision to much but at I see big star biters around red lights. But on the day not as much as green.
They did it's call the Romeo 9T for rifles and the price tag is $4000.
Cool.. Now make an optic that that cycles through all those reticle options.. i want the circle dot, the 3moa and the 6moa option all in 1.. Until then ill just stick with the Holosun eps carry >
How come no one talked about the NG68SPEAR - QD during the presentation? 54:56 @SigSauerInc
It's not a new product for june 2024.
36:53 the Steve Jobs of sig 😂
Hey Sig hear is a idea, how about pricing for the normal person. $4000 for the Romeo 9T for our rifles?
Now they need to put the comp cutouts on the fuse slide
Make a P225 that accepts p365 Magazines, has a milled slide for an optic, and a pic rail......please!
Yes!
Will they offer the upper or conversion kit for the 277 spear? I've got the 308 version and I'm not buying another full rifle when a simple conversion will work. Also, what is the difference between the 6.8 suppressor and the 308 suppressor?
Are you going to make a p320 sxg frame?
Ron Cohen looks like Liam Neeson
Gerard Butler
🇺🇸🇺🇸🇺🇸 Awesome!!
This is like an E3 showcase. Those went away for a reason.
SIG Range Day in Vegas for SHOT Show 2025?
What happen to your mcx spear chambered in 277 sig fury? What is your excuse for permA delay?
6.8 and 277 are the same.
👍
Still waiting for the 10mm 365.
50:30 did guy actually raise his hand and ask a question during the speech. Oh man lol like buddy,
You’re gonna find out tomorrow when you shoot it.
(Comment removed somehow probably yt censor crap) I enjoy traveling, but being disarmed is not pleasant. California is sad state for edc and self defense. Some states could become like california if we let them. Happy 4th of July and i don't like the corrupt politicians and people tell kids you can identify yourself as a pancake or whatever. I love the 4th of July but not those who try to destroy us. SIG SAUER could use some logic with the magazines cause the 15rd mag is the same length as the 17rd mag and sig could easily do a 13rd or 14rd flush magazine for the p365 xl instead 12rd mag and shorten the 15rd mag to be smaller than the 17rd mag. Why would anyone want an 15rd mag that is the same in height as the 17rd mag? Sig do better work for p365 series especially the xl and the original could squeeze some rounds in and the quality on the mags are not the same as the 17rd x macro mags. Lifes could be saved with these. That's why we need an international 2 amendment right 🦅.
C'mon Sig. You would have worldwide adoption of the 277 Fury .. if it was designed for the Spear LT ( an AR) with the 18 in barrel giving close to 6.5 CM range & BC ... with only a 50% increase in weight.
More so ... if the Spear was designed as an bufferless, piston monolithic AR15/10 upper with ambi non reciprocating side charging handle with 9, 13, 16, 20 in barrels ... for both an AR & bullpup lower.
The 6.8 CC ... should have been a high pressure, high BC ... AR cartridge that is significantly better than the 5.56 as a DMR or SAW and could replace the 308 for the LMG ad SPR/DMR.
Tim Kennedy? I guess the product he is introducing will not be sold to folks under the age of 21?
Wow. I wonder how much more money Sig would be making once the NFA gets vacated. 🤔
I do believe 10 rounds in a CCW was smith & wesson in the 80s
UMMM UMMMMM UMMMMM
Should give everyone who bought a x legion a free slide. Not cool you keep doing that to us.
Gods work 🤣
I like the keynote. Don’t like Tim Kennedy
Where’s the jacket that Jack Carr has on?
Probably in his closet. LOL
Seriously, pretty sure they have them in the Experience center at the Academy.
@OfficiaISigSauer No way. What did i win??
Yo yo yegd yo
The only thing worth watching was the 40th anniversary P226 which was as "base" as it gets. Sig blew it.
I hate seeing the "Assembled in USA" stamped onto Sig products... It should be MADE in USA.
Assembled is a play on words... You have to do almost nothing to the product to make the claim that it's assembled in the USA. Put a battery in it and pack it into a box... "assembled"
Made in Germany is good enough for me
@@rudrashakti108
But it's not and they're not suggesting that it is.
@OfficiaISigSauer
Sounds "official" to me.
🤣🤣
You wanna know what you actually “need” to do? Faze out the 320 and use 365 FCU’s in redesigned 320 frames and slides that accommodate the 365 FCU. That lawsuit you just lost isn’t gonna get you a bunch of sales, especially with all of your overpriced options.
More accidents happen with glocks. Fact.
@@defilade1066 trust me lol I’m not a Glock fan by any means. Terrible ergonomics and economics plus nothing has changed in 30 years. They’re far behind the pack leaders in my eyes.
@defilade1066 probably because there's been millions more glocks sold than 320's.
@@johnc5330 the P365 has been the highest selling gun for the last two years straight in the United States 🇺🇸 being the same gun since 1992-1993 is the ONLY thing Glock has going for them. If they had came out 5 years ago, they wouldn’t be the “king” of anything except bad triggers and horrible grip angles 🤣 I bet if some of the other newer companies had been around since the early 90’s then people wouldn’t give so much unjust love to Glocks 🤷🏻♂️ that’s just the facts. Government contracts are the only thing that has kept Glock around this long but it’s also what drives up the cost of a very cheap pistol to make. So many better options these days
@Bryan-1980 there's more glocks in circulation hence more chances for an accident was my point. If you can't shoot a glock trigger you just flat out suck as a shooter, let's be honest. I've been there and done that with more sig guns than I can remember owning to be honest. I get a 50% discount. Sig is nothing special. The only 2 things I have left from them is a 365 xmacro and a sr556 qd suppressor.
One day I may try a sig but right now I just have to many bad ass guns that have great warranty and great qc unfortunately sig has had the chance to fix things and make things good with people that have bought there products that they could give shit less about
As a Sig fan and lifelong NH resident, I rate this show a meh out of 10.
edit: The MCX is cool but change the color from that ugly bronze/tan. The virtus color was perfect.
Shame on you for not liking peanut butter bro
@OfficiaISigSauer I think you guys got hacked =/
take things other companies have been doing for years and call it yours -- gimmicky constant "we changed one thing" new variation rollout -- skimp on quality control and charge double -- the marketing woo is absurd for anyone with a brain
And you have to be rich to buy anything lol
Glock ,hold my beer..G18
Sig has lost its way……. When Sigg was in Germany, they had awesome products now just plastic junk, and of course they have to sell ammo and Optics and all the other stuff they shouldn’t even be producing. Stick with being a gun company but going back to stuff that is not some junk.
SIG is like... the only supplier of small arms for the entire US Military.... and like every allied special forces in the world...
They literally introduced a stainless framed 320 in this video. What are you even talking about?
What a boring presentation
Glock never hot sued for guns shooting their owners.😂.
You would be very very wrong. Why do you think the NY trigger exists?
Lol glock got sued a thousand times when the first generation came out. Quit making stupid statements
Your main source of info must be CNN
Yes Glock has absolutely been sued. More than Sig, in fact.
They actually called it getting Glocked
Lol I like sig. Fix the 320 first before making new stuff
They work fine to me. Are you referring the Glock supplied fake news?
The only problem with the 320 is the operator.
The 320 is fine.
@@Rangergeo85 no it's not
@@MossyOakFreak @Caniksigboy78 must be a cop
Increased pressure in the ammo for extra performance? 😂😂😂😂.
Go look at military arms channel, he literally compares 2 cartridges where the only difference was pressurization. One was a more pressurized version of the other, the difference in performance was less than 1%.
AKA False promises
Fudd nonsense. The 6.8x51 cartridge pushes 3000fps out of short 10 inch barrels in the 113 grain load. You 5.56mm fudds think that just because thats what we use now it's what we'll always use.
I look forward to the days 5.56 is looked at in the same lense as we view the ancient 30-06 round.
How would you design it ?
So, the military arms channel was testing the brand newly released sig rounds? Or, are you predicting the performance of the new sig ammo based on their design testing ? Or, is it something else you are expressing, with or without hands on experience ? Don't mind me waiting for sig's performance data before making any claims as to it's accuracy and replication.
not expecting a literal nazi to show up multiple times in a sig video. or maybe I was
tucker carson is a man who would be receiving a special engraved sauer 38H from himmler if this was the 1930's
Are you drinking your soy. @@ergofoxxxy
Yeah, hannity is fuckin trash. Love Sig but some of these “VIPs” are the scum of the fucking earth.
@@GainAndMaintainEnergyNo it's in his I.V.
Who? tim kennedy?
Great job Sig!👍
Unbelievable the shameful way people dress and groom themselves, if at all.
Seems like beards and tattoos is the in thing.
Sig Sauer use to have class..... Unfortunately they went the way of the clown's.
Stay safe and Pure 🙏👌
Live a life of honor and morality 🙏
Yes dress and facial hair are clues to anyone's character.
So Lizza, what did you think of the products being presented? Just wondering if you are one of those of whom own a firearm. Btw, beards in the military were recommended to those stationed in the mid-east and tattoos have a long standing tradition in the military. In fact, being in the military without getting a tattoo speaks more to the person's job: carrying a weapon often tattoo'd, while doctors, clerks, etc probably not. Just thought you might want to know before questioning their honor because every presentor either works tirelessly to provide the best military fighting tools possible or have served in the military or both. Did you listen to the intro description of these folks ?
"Live a life of honor and morality" while denigrating individuals you have never met based on their appearance and wardrobe. So just.
@@gunguru7020 The cult of "the beard makes the man" would like a word
@@hitman_s1 Is that a thing? Plenty of people express themselves through dress and appearance. Kind of the point with fashion. I suppose you can make plenty of rational generalizations from it but morality and character are likely not them.
Sig, the only company I know that can remove the hammer from the 250 then turn around and call it a 320 and call it innovative but the engineers were either inept or lazy and managed to make a flaming turd that is so good at self defense it shoots itself, hope your insurance company doesn’t dump over the lawsuit you just lost and tons of others you are probably going to lose.
The P320 kept design similarity to the P250 in many areas to keep the same magazine and grip module capability. Much more efficient that more propriety parts for the P320. How the hell is this a bad thing ? Re drop fire, Glock Smith, Ruger, Taurus, Walther, even Beretta had a drop fire issue with one of their models at some point. Love your double standard.
@@great_deception it wasn’t “many areas” it’s literally the same gun, same frame, same fcu except whoever decided to remove the hammer didn’t think to redesign the the striker, a p320 striker is fully cocked and locked, and with no external safeties like a trigger dingus, that means it’s highly likely to go off with a bump to the trigger or the internals, whereas on other striker fired pistols, pulling the trigger completes the cocking of the striker. And the biggest difference between everyone else’s drop issues and sigs? They all admitted to it and told people what they did to fix it, sig blames everyone else and won’t even tell people the updates they do their pistol. Of course, now they can’t admit in public they fixed a problem they for years denied existed because besides making them look stupid, it would force their insurance company to pay millions in claims.
Blah blah blah cry more because Sig got the contract. 😭
@@johnhatchel9681 awwww look at you! You thought you be smart and come on here talking trash and don’t even know how firearms work 😂😂😂 To bad “smart” people like you don’t even realize that when teams deploy they ditch their sigs and go with Glock, but I’m sure you knew that? Because I’m crying because sigs got that contract?😂😂😂😂 oh man, wait until you find out what happened with sigs new fancy expensive rifle “got the contract”😂😂😂😂😂😂😂
@@DirkDiglerSmallPeePeeGang Cry more baby boy. You must've just learned the P365 was the #1 selling pistol of 2023. That probably hurts.....