loving the daily uploads mate, met you in Bendigo and told you about my plans to get a Lancer Ralliart and Ive finally found one and am flying to Adelaide to pick it up on Wednesday. Thanks for the inspiration, you've inspired me to start making videos again.
Where's the plate that houses your push to start from? Would like to find a plate like that for my fg to add some usb ports and custom accessory buttons
Murray Coutte (MCA) do produce some good coil-overs so I hear. Don't make the same mistake and go Teins, as they are terrible from numerous perspectives. I used to have 600 pound springs and Bilstein dampers using Urethane bushings everywhere - which was much better on the mountains and circuit. Teins are not good in real world hard driving for extended periods. Great video, thanks for posting.
Sucks I've already done 99% of the work to my car already before I got a decent cam to document it. Anyway, can still re-visit some stuff just like you are. :)
When are you going to put the matching rear wheels on the car? I look forward to seeing the Perth videos and Australia 🇦🇺 day video. You should also get paddle shifters and Zac baldy sill plates.
@Search OVA720 Don't believe the conspiracy theories and hub shows more power than roller dyno's. Really only need hub dyno for 800rwhp+ I have made comment about this before on Zac's tuning day. It's still a fast car and I'm sure it's tuned well.
Hub dynos are definitely NOT more accurate. Your car is driven on the road WITH wheels not on hubs so it takes more energy to move 2 rear tyres than it does to turn the hub hence the power loss.
I do get your point but at the end of the day the wheels are apart of the car itself so it needs to be measured with the tyres on the car. Otherwise people should be stating that they have x amount of hub wheel kw Hwkw lol anyway I only brought this up because it can mislead people when they see a particular car getting x amount of kw. The truth is the 3576 fg isn't capable of that much power unless it's either on e85 or a happydyno
440hp? Mods? I wouldn't say any... Maybe a cooler and intake, boost turned up? You want falcon mods, look up Maria Passos's RIP-SS BA Falcon. That's a Falcon with mods.
hey man im looking at getting wheels for my xr6 fg, i love these wheels but like u said they crack alot? another other recommendations? Brisbane area :)
anyone in the comments or even baldy, could tell me which should be some of the first parts to get for a turbo fg to increase horsepower majorly or even on my n/a before i get my turbo fg, but for example like is a cold air intake a must? and how much of a difference will that make to power gains, someone help
@@ryan04310 thanks heaps man! planning on keeping my n/a stock besides the straight piped exhust and hot dog rear and my rims, and then selling it to save up for turbo
@@mikehunt8221 no worries. My mate just tuned his NA with those mods and got 181rwkw. Goes alright for an NA. You can also get alot of those mods second hand off Facebook market place
@@ryan04310 far out thats not bad ay considering the n/a makes 195kw (260hp) but thats to the engine not to rear wheels, so 242 hp(181kw) to the wheels isnt too shabby espcially for straight 6 n/a, but yeah ive definetly considered getting the basics done to my n/a like full catback and extrators, air intake and like i heard the ss induction growler kit apparently go hard on fgs but think i might just save for the turbski, cheers mate
Time for a turbo and fuel pump upgrade. 440hp is below rookie numbers!
Rhysk94 Agreed! Needs a bigger turbo upgrade next 💯
Surely thats next, atleast needs 6hundy
Itz_Jack Absolutely, hopefully he puts a GTX 3582 on or something 💪🏽
Nah he wont, too much of a pussy, can tell that measly 400hp scares him already.
Rhysk94 well this comment didn’t hold up now he’s going 600hp aye?
loving the daily uploads mate, met you in Bendigo and told you about my plans to get a Lancer Ralliart and Ive finally found one and am flying to Adelaide to pick it up on Wednesday. Thanks for the inspiration, you've inspired me to start making videos again.
Up the Ralliarts man, great cars hope it treats you well
Jackson Strain thanks , I’m very keen
Love your vids Zac keep going strong.
Yewww, good to see all the mods in one video.
Put a Chev badge on it then when Holden owners complain yell "SEE HOW ANNOYING IT IS!".
😂🤣😂🤣
Ceramic window tint really is mint 👌🏼, got them on my clubby few weeks ago and you can tell it’s much cooler in the car on sunny days
Hasn't this video been made before?
Awesome Zac, answered all my questions at once :D
Hi Zac , what boost are you running on stock valve springs?
Where's the plate that houses your push to start from? Would like to find a plate like that for my fg to add some usb ports and custom accessory buttons
Murray Coutte (MCA) do produce some good coil-overs so I hear. Don't make the same mistake and go Teins, as they are terrible from numerous perspectives. I used to have 600 pound springs and Bilstein dampers using Urethane bushings everywhere - which was much better on the mountains and circuit. Teins are not good in real world hard driving for extended periods. Great video, thanks for posting.
Sucks I've already done 99% of the work to my car already before I got a decent cam to document it. Anyway, can still re-visit some stuff just like you are. :)
Hahahhh when you said your exhaust looks soo clean I was like what??? But then I realised 😂😂
Nice vid man make me wanna but a xr6 turbo so badly
When are you going to put the matching rear wheels on the car? I look forward to seeing the Perth videos and Australia 🇦🇺 day video. You should also get paddle shifters and Zac baldy sill plates.
Jordan’s Car Reviews when they get them back from getting repaired
Flynn Nash thank you and please also subscribe to my channel and tap the notification bell please and please also like and share please.
First but idk what to say.
Correct me if I'm wrong but wasn't that 326rwkw figure from a hub dyno???
300-310 would seem to be a little more appropriate..
#happydyno
@Search OVA720 Exactly they are accurate at the hub... Then you put the wheels back on.
@Search OVA720 Don't believe the conspiracy theories and hub shows more power than roller dyno's. Really only need hub dyno for 800rwhp+ I have made comment about this before on Zac's tuning day. It's still a fast car and I'm sure it's tuned well.
Hub dynos are definitely NOT more accurate. Your car is driven on the road WITH wheels not on hubs so it takes more energy to move 2 rear tyres than it does to turn the hub hence the power loss.
I do get your point but at the end of the day the wheels are apart of the car itself so it needs to be measured with the tyres on the car.
Otherwise people should be stating that they have x amount of hub wheel kw
Hwkw lol anyway I only brought this up because it can mislead people when they see a particular car getting x amount of kw. The truth is the 3576 fg isn't capable of that much power unless it's either on e85 or a happydyno
Dam that engine bay looks mint
Love the vids keep up the good work
1 year yesterday since this video was released.
Yess you listened to me
So basically,only 1000cc injectors and walbro 460 , no head studs or valve springs ?
He’s obviously got no idea about real performance
Sooooooooo, when are you and FGmods doing a video together??? ;)
Waiting for that exhaust mod like🙇♂️
Hey Zac, are you going to be doing an engine rebuild over time for the R33?
So we are not gonna talk bout the debadged grill
Did you sell your tools?
Hey Zac, where did you install your pwr gearbox cooler on the car?
440hp? Mods? I wouldn't say any... Maybe a cooler and intake, boost turned up? You want falcon mods, look up Maria Passos's RIP-SS BA Falcon. That's a Falcon with mods.
Injectors and pump is more of a mod than a bloody intake. It’s not bad really with a stock turbo but I guess you’re just a hero
Was this on 98 or e85?
Need an xr8 bonnet 👌
hey man im looking at getting wheels for my xr6 fg, i love these wheels but like u said they crack alot? another other recommendations? Brisbane area :)
SUH-TOH-TOH-THO-TOH
Put a killer tune on it
Does Antz performance make a turbo side intake for Ba xr6 turbos?
Yes but you need a plenum too because the air intake system in different due to the throttle body position
Have to admit, Flash Detailing at Northlakes are top notch if you’ve got the baggy pants from a wallet swollen enough to afford their excellent work.
Niiice!!!
Next what you need to do is take the ford badge off
1 decent video a week would be better than a crap vid every day
440hp show us a burn out or the wheels spinning. Use the power max use the power
100th like!
Just another old taxi with a hairdryer
Hello
anyone in the comments or even baldy, could tell me which should be some of the first parts to get for a turbo fg to increase horsepower majorly or even on my n/a before i get my turbo fg, but for example like is a cold air intake a must? and how much of a difference will that make to power gains, someone help
Turbo:
Injectors
Intercooler
Highflow Cat
Intercooler piping
Tune
NA:
Extractors
Underdrive kit
Cat back
High flow cat
Tune
Intake/airbox mod
@@ryan04310 thanks heaps man! planning on keeping my n/a stock besides the straight piped exhust and hot dog rear and my rims, and then selling it to save up for turbo
@@mikehunt8221 no worries. My mate just tuned his NA with those mods and got 181rwkw. Goes alright for an NA. You can also get alot of those mods second hand off Facebook market place
@@ryan04310 far out thats not bad ay considering the n/a makes 195kw (260hp) but thats to the engine not to rear wheels, so 242 hp(181kw) to the wheels isnt too shabby espcially for straight 6 n/a, but yeah ive definetly considered getting the basics done to my n/a like full catback and extrators, air intake and like i heard the ss induction growler kit apparently go hard on fgs but think i might just save for the turbski, cheers mate
Its slow...
Sup
I have pink headbolts
better than original
And yet you sold it and got a rx-7 mazda?
You won’t pin this
Deacan GAMING your right 😉
My 1974 Morris Marina is faster than this
Excellent Comment no one gives a fuck
A dash cam is not a mod lmfao
Pin this
U need a holden
Nahhhh.
Sam_And I say that every video and every body says no
I know.