Jaguar s type 2005 3.0 v6 parkbrake fault ,cruise not available
HTML-код
- Опубликовано: 23 окт 2024
- this is my problem -parkbrake fault ,cruise not available
Jaguar
parkbrake
fault
cruise
not
available
facebook: DVS 3D AUDIO
Instagram: DVS 3D AUDIO
/ @dvs3daudio
www.vbox7.com/...
You can turn off the car until all the lights are off on the dash. Put your feet on the brake and pull the brake release lever on the console , start the car and toggle the lever as soon as you see the display characters where you saw the Parkbrake Fault. This will reset the parkbrake. You may have to repeat it until you get a feel for doing it. I have been doing this for approx. 3 yrs now.
Found was happening only when the battery was low, every time was related to low battery. Headlight on without engine, Radio on without engine, even a cold day can effect. MIGHT be that some of the modules don't like low voltages, replaced the battery and have not had issues since, only time will tell............
Curious if you figured out with the issue was. My Jag ('05 S-Type) is doing the same thing😣.
Mine too
Anyone figure it out yet?
Why is there no chime? is that only on the R models?
replaced my battery and it fixed it
👀
how do you switch the controls on your cluster like you're doing?
A-B bottom
Hi, how do you get the car to do these tests?
I've just had this, only had the car 2 weeks n turns out mine is the module in the boot packed in😖
:( tru story
Slm ayni Problem benim araba da basladi neyapacagimi bilemiyorum
I had the same problem it was the throttle position sensor
I’ve replaced my tps twice and still says it and still says THROTTLE POSITION and no other codes idk bs car and a pos
Benim araba da ayni Problem var
Slm jaguar s tpd d ayni Problem var nedenyapar
hold the brake fully and hold the parking brake for 3 seconds and then up, if it does not work, turn off the terminals of the manual module and install
my car is doing the same thing
hold the brake fully and hold the parking brake for 3 seconds and then up, if it does not work, turn off the terminals of the manual module and install