Just tried my first 5 rounds. What a hoot to shoot. Kinda cold out there today, but can't wait to use the 15 rnd mag. Got a feeling that this sucker's gonna cost me a fortune in shells.
The ATI Omni Hybrid is an almost exact copy of the Safir T14. The blocked out areas of the front rail are covering a sleeve style piston which moves two extensions back through the barrel nut/barrel extension to cycle the bolt. The small plate mounted in the upper near the rear pin lug is what actuates the ejector collar inside the bolt to eject the spent round.
I wish they imported these into the UK. Semi-auto rifles are prohibited and 410 seems like it would be the closest to a rifle, and you don't have to have huge mags to house only 5 rounds.
I posted a long winded comment in this video's comments, they should be uk legal with a section 1, but I'm not 100% sure as it would be easy to convert it to 5.56 with straight pull ar parts, and I bet the government wouldn't like that. I have a shotgun certificate but not a section 1, I'm getting one sorted out soon and want a mag fed semi auto (or possibly pump) tactical/military shotgun. I'm on a bit of a budget and would prefer my first 12 gauge (only have a 20) but this ati would be cool as it will be used mostly for pest control. Could do target shooting with .410 slugs though and get the sky rats with birdshot. Can't afford a saiga but was looking for recommendations. I reckon you could probably get a single one of these brought in by a reputable gun dealer. I'm more in the market for a 12 though, the new kel-tec looks promising, but I've never seen a kel-tec product in the uk and would prefer to get something I don't have to try and get by importing it from the states (which may be impossible, but most likely hard, expensive and inconvenient) I've also looked at the Chinese qbz-95 type shotgun, but I've not seen that in the uk either, it's probably easier to get than a American gun though, as I belive some companies import norinco products. Oh and if you give me any recommendations, don't recommend the mossberg 590m I think the magazines are bulky and overpriced and I think it's ugly. Or a Turkish gun, I don't want to buy from a country who's government works with Isis. Oh and my budget is around £600 Edit: thank you to anyone who gives recommendations and God bless. Also as the original commenter said, this would be very similar to an ar for uk guys who don't want a straight pull or a .22. .410 slugs are no joke and you have the option of buckshot too. I like the idea of this gun, but I've heard bad things about ati, and I'd rather get something in 12 too and from a more reputable company, an ar type shotgun would be awesome though, literally this but in 12 gauge. Still wouldn't turn my nose up at this, especially if it's cheap and available.
Mike Mehaffey Took my ATI 410 AR-15 upper out today, & ran 6 Federal #9 shot shells throw it. All 6 shells wet throw as fast as I could pull the trigger, with out a hitch. So squaring up the inside of the extractor did work. I think it may have been bad machining or casting? But filing the inside of the extractor to look like a sharp capitol (L) worked. The outside of the extractor was to thick & would be pushed by the inside of the chamber, into the brass base & rim of the shell, ripping brass off the rim & putting a small dent into the brass case wall. Thinning down the outside of the ejector & tapering the end with a small file, took that problem away. I did take the extractor out with a roll punch & worked on the inside (L). The outside that runs up against the chamber can be done with extractor in place & a fired round to gage it with, until it stops jamming on the inside chamber wall. I hope this cures my problem & helps anyone else out with theirs in the future. Good luck.
This is exactly what I’ve been waiting for. I’m assuming these are already on the market. I know what I’m asking my wife for my birthday. Now they just need a drum for it so I can burn up even more ammo.
Update: I just finely got Federal shotgun shells to chamber in my upper. I had to do some filing & stoning to the bolt. (I think it is the shell holder guide? You can see them in 109 with your finger pointing to the biggest one) The biggest one, that would be on the right side, holding onto the shell base, for ejecting was the biggest problem. The inside that hold the shell base, was WAY to tight. It looks like the part was never even fit to go around the lip of the base of a shell. It would pinch the base & put a rip or gash there. A few min with a small file & it is now fixed. Also the 45 degree angle that the shell slips over, was not smooth as it should have been. I took out the sharp & uneven angles with the stone. Next problem is it was still getting stuck in chamber, so I had to file & stone the excess metal off the outside of the same shell holder guide, as I think it was now jamming up against the inside chamber & being pushed into the shell base & jamming the shell inside the chamber. I also had to stone the opposite shell holder guide to get that side to fit. I did horn the inside of the chamber at first, thinking it might have been burrs in there making it stuck? It did help, but I will never know if it did have burrs, as I don't have a bore scope to look. I think Quality Control is MIA there in Turkey or maybe the 12 year old's just don't know gun making?
I want to say this about that. As a owner of a semi automatic magazine fed shotgun. Always and always insure that the shells are loaded with the rims forward of each other. They will jamb every time if you don't. You will find out quickly if you didn't.
I want this more then the AR 15's everyone else are getting !! Love the Idea of a 15 round clip fill with 00 ought buck or alternate with buckshot and slugs . The serious look of a AR 15 with the easy to find Ammo of 410 shotgun shells its Genius . In an APT. you could load with #4 bird , rabbit shot and not worry about thin wall penetration into the neighbors but still effective stopping power !!
Ordered one 4 days ago. waiting for it to get here. But I will be patient because we are having a heat wave 100 degrees out for the next two days. Yep I can wait.
Bob Wampler I agree plus the fun factor for 410 is off the charts. My older boys can help but laugh every time we shoot the Taurus Judge at a shoot n see targets with #6 birdshot. Plus I saw a Paul Harrell video about 410 birdshot out of a good length barrell at close range is nasty with minimal chance of over penetrating walls
No it wouldn't.you'd be better off with either a regular 556 or a standard 12 gauge pump/ semi auto. That said 410 is the only shot shell that's size effecient for mag feeds systems. Most 12gs and 20gs are limited to 10ish rounds in the size of a 30rd magazine. In 410 bore you get about 20.it is a neat idea but with how anemic 410 is compared to ALL The other options available in the ar15 platform.unless you for some reason cannot use a rifle it just seems like a novelty.
@@MrAutochamber shotgun barrel length after 10" does minimal to increase accuracy. It literally only brings you that much closer to the target.it used to be the thought it somehow kept the patterns tighter but that is incorrect.all you need to do is allow the powder to burn after that a longer barrel is just a p.i.t.a. to shlep through the woods.look at turkey hunting shotguns. A few years ago anything under 28" just was not suitable as a turkey gun. And specialized models had VERY, VERY LONG BARRELS. 30" being the standard and it wasn't impossible to find 36" and longer still.the length that we thought was helping us make those 35-45m shots was actually just getting banged around on branches and rocks all to save us what amounts to 1 good step forward(or calling the bird in a foot or so closer). Newer designs are sporting shorter and shorter barrels. Im pretty sure mossbergs new gobblestopper come with 20" barrels and I know I've seen an 18" gun camo'ed up and ready to go in the hands of a person I've successfully hunted with several times.times they are a changing I guess.
@@thebowtieguy777 not necessarily.... You could always cut straight "rifling" and it would fall into the "firearm" classification without barrel length restrictions. Shotguns are classified by their smooth bore. Rifles by Rifling that causes the bullet to spin.cutting grooves along the long axis avoids both definitions and a " firearm" is born.a couple manufactures have gotten away with this in 12 gauge sbr length ar-15 ish guns.
Willie Greene you mean 5, this way you can leave one at family members house, bury 2 in different locations keep one in the vehicle, one at work (in desk or in the tool box) or both if youre a shop owner.... And one in the house, in the bathroom.... Its polymer somebody's gonna shit regardless.
Graham, I just bought one of these .410's hoping I would be as happy as you are. Mine ,however does not function well at all. The spent rounds do not eject from the bolt and jam in the chamber. I know that is not your issue and so far ATI has been receptive to my concerns. The odd thing is that the detail on your gun looks completely different than mine. My lower has the ATI logo but not the words "Omni Hybrid." The enlarged trigger pin bodies are absent. Your bolt carrier group looks completely different than mine. It's almost as though I have a different gun. Currently, my upper is in a box on it's way to ATI for repair, maybe replacement (I hope).
It's been a few years since we made this video, I wonder what and why parts changed. I also know that over the years there have been completely different .410 uppers imported and sold under a different name. Unfortunately we don't have any connection with ATI so can't help you there. I hope they take care of you.
I really hope i can get this on a FAC in the UK, we can own Saigas and other magazine removable shotguns. They recently banned 3000 GBP (5000 USD) guns with lever release catches near the selector AR's which would allow us to have close to semi auto AR's in the UK as they were scared criminals would get their hands on one of like 20 in the UK 🤨
Did you try the upper on a standard lower? The magazines are way to tight on a Matrix arms lower I planned on using ( also tried the mag on a Anderson lower and 2 billet lowers, way too tight without the mag being loaded even). The magazine notch/ramp thing on the ATI mags make them way too tight of a fit.
I like it. That's a .410 slug, almost a .45, but not, coming out of an AR going 1800 fps. That's 787 ft/lbs of knock down power. Far better than a 1911 in .45 cal. Even better than the 10mm. Almost as fast as the 5.56mm, but not, and shaming the .223/5.56mm to the back of the bus in stopping power.
Well, I had a very, very bad shooting experience with this weapon, it would not feed, and after sending it back twice, and 6 months later, with lots of threats from me, I thankfully got my money back. I am sure some have had better luck.
I've watched two videos on this shotgun and not once did anybody cite mag capacity... I found out in the comments section. Maybe I missed it being mentioned...idk.
I'd be interested in purchasing an upper if there are some ammo / upper combinations that run well with the stock 5.56 buffer and spring? I already switch out uppers for different calibers without making changes to my lower and it would be great to have this convenience with the ATI .410
i asked for this type of gun at gun shows in Canada for at least 15 yrs, i`m 60 and have hunted since i was 9yrs old, this just makes sense, on 5 shot clip with game shot the other with defensive slugs for bear protection. I`m aboriginal, [Metis] and had to kill a bear with my 22 when i was about 14 nearly didnt survive. Used my browning break down 11 shot semi-auto, if it wasn`t a semi-auto i ould have died, but the bear died literally at my feet with the gun barrel touching his forehead lt few shots. Still own that 22 and its a collecter gun now
So, the upper along with OEM magazines and a buffer and buffer spring work with any AR 15 platform; regarded you swap out the buffer and spring? I assume so based on the limitation on shotshell length... Anyway, cool!
Is the barrel rifled? Can a Sabo round from it be made fairly accurate using more powder and a actual proper FMJ? Just curious how worthy this is of my love compared to the m16a2 which I became very intimate with in the corps. Semper fi
What they mean by "short piston" is Basicly the d.I. system we already know in the ar15.more accurately described as "micro or nano piston".the "piston" is on the bolt extending just into the end of the gas tube at the breach- the "gas key" .Calling the ar15 "direct inpingment" is at best a simple misnomer or more sinisterly a marketing ploy by stoner to make the ar15 seem more modern to get away from the piston machine guns of the era it was invented in.true D.I. has gasses venting right into the bolt to push it back.not how the ar's work using the gas key system. 410 is probably the only shotgun worth running in a mag fed shotgun. Size+weight vs capacity is just silly with 12 and 20.
Wanting something like this for my mother as home defence. Does anybody here have any input on recoil? It will be for a 75 yr old woman with arthritis and osteo perossis. Thank you.
Mine keeps Jammin center back for repair it's still jams what a piece of junk they can't seem to get it right what's the point in constantly sending it back
I don't know about using that AR to introduce someone into shotgunning if you want introduce someone into how to use a shotgun you are better off using a pump action shotgun because it takes a completely different skill-set to use a pump action shotgun then it does a semi-automatic shotgun
Did I correctly understand that this weapon is gas operated? I genuinely don't care for the 2&1/2 inch shells. I prefer the 3 inch shells that I carry in my Bond, and would honestly prefer something that is going to give me uniformity of ammunition. This doesn't do it.
Can the bcg and parts be put on a different upper for full custom builds or is the upper machined differently this would be a really cool set up built from a skeletonized receiver set with a Hera cqr stock set
![Chicken P - People's Favorite (Remix) [Feat. 42 Dugg] (Official Video)](http://i.ytimg.com/vi/a6Bn8FEtxmY/mqdefault.jpg)
Oh man nice intro song love megadeth if anyone is curious song name is “dawn patrol”
Just tried my first 5 rounds. What a hoot to shoot. Kinda cold out there today, but can't wait to use the 15 rnd mag. Got a feeling that this sucker's gonna cost me a fortune in shells.
Mick Mcloughlin YEA BUT URE GOING TO HAVE A LOT! OF FUN.
Magazine Warehouse out of Miami Florida has them for $28 a piece just got three last week they receive the new shipment exact type only 15 rounds
late 68 buds gunshop has the 15rd mags for 24$
You could reload them
Awesome, once again you showed me something I didn’t even know I needed. Great table top, thanks for posting!👍🏼
I went with the Genesis Gen-12. My 308 upper fits it perfectly. 2 guns in 1
yup, I want one !! I saw your other video, I liked the way it cycled all the different ammo. Awesome!
The ATI Omni Hybrid is an almost exact copy of the Safir T14. The blocked out areas of the front rail are covering a sleeve style piston which moves two extensions back through the barrel nut/barrel extension to cycle the bolt. The small plate mounted in the upper near the rear pin lug is what actuates the ejector collar inside the bolt to eject the spent round.
jollyranchhand sorry its blowback
This is from the ATI website.
"ATI's Omni Hybrid .410 shotgun is a gas operated, shortstroke, balanced piston system."
So it's not blowback.
Ervin Baker WRONG
After paying off my Ati 1911 military. This may be my next item on my wish list
hey i have the same gun. just got it for Christmas love it.
popular lego ......I see you got it around a year ago. How has the reliability been?
I NEED THIS!!!!!!!!!!!!!! Awesome review my friend.
budgetgunfox 117 WE 2
Back 4 a inspirational video. Been a Big fan of 410 since a NA cub long ago. TY 4 ur fine work
I wish they imported these into the UK. Semi-auto rifles are prohibited and 410 seems like it would be the closest to a rifle, and you don't have to have huge mags to house only 5 rounds.
This is not a rifle. It is a shotgun
I posted a long winded comment in this video's comments, they should be uk legal with a section 1, but I'm not 100% sure as it would be easy to convert it to 5.56 with straight pull ar parts, and I bet the government wouldn't like that.
I have a shotgun certificate but not a section 1, I'm getting one sorted out soon and want a mag fed semi auto (or possibly pump) tactical/military shotgun. I'm on a bit of a budget and would prefer my first 12 gauge (only have a 20) but this ati would be cool as it will be used mostly for pest control. Could do target shooting with .410 slugs though and get the sky rats with birdshot. Can't afford a saiga but was looking for recommendations. I reckon you could probably get a single one of these brought in by a reputable gun dealer.
I'm more in the market for a 12 though, the new kel-tec looks promising, but I've never seen a kel-tec product in the uk and would prefer to get something I don't have to try and get by importing it from the states (which may be impossible, but most likely hard, expensive and inconvenient) I've also looked at the Chinese qbz-95 type shotgun, but I've not seen that in the uk either, it's probably easier to get than a American gun though, as I belive some companies import norinco products.
Oh and if you give me any recommendations, don't recommend the mossberg 590m I think the magazines are bulky and overpriced and I think it's ugly. Or a Turkish gun, I don't want to buy from a country who's government works with Isis.
Oh and my budget is around £600
Edit: thank you to anyone who gives recommendations and God bless.
Also as the original commenter said, this would be very similar to an ar for uk guys who don't want a straight pull or a .22. .410 slugs are no joke and you have the option of buckshot too. I like the idea of this gun, but I've heard bad things about ati, and I'd rather get something in 12 too and from a more reputable company, an ar type shotgun would be awesome though, literally this but in 12 gauge. Still wouldn't turn my nose up at this, especially if it's cheap and available.
Mike Mehaffey
Took my ATI 410 AR-15 upper out today, & ran 6 Federal #9 shot shells throw it. All 6 shells wet throw as fast as I could pull the trigger, with out a hitch. So squaring up the inside of the extractor did work. I think it may have been bad machining or casting? But filing the inside of the extractor to look like a sharp capitol (L) worked. The outside of the extractor was to thick & would be pushed by the inside of the chamber, into the brass base & rim of the shell, ripping brass off the rim & putting a small dent into the brass case wall. Thinning down the outside of the ejector & tapering the end with a small file, took that problem away. I did take the extractor out with a roll punch & worked on the inside (L). The outside that runs up against the chamber can be done with extractor in place & a fired round to gage it with, until it stops jamming on the inside chamber wall. I hope this cures my problem & helps anyone else out with theirs in the future. Good luck.
They should make a "pistol" version of this
This is exactly what I’ve been waiting for. I’m assuming these are already on the market. I know what I’m asking my wife for my birthday. Now they just need a drum for it so I can burn up even more ammo.
They do it a 30rd about 95$
A drum and a bumpfire stock
@@kalokook862 send link cant find one 😞
@@toddmaek5436 i have a lower with binary. I usually use it with a .22 conversion, but shit, a .410? Fun on a bun
Now there’s another gun I need Great video
Update: I just finely got Federal shotgun shells to chamber in my upper. I had to do some filing & stoning to the bolt. (I think it is the shell holder guide? You can see them in 109 with your finger pointing to the biggest one) The biggest one, that would be on the right side, holding onto the shell base, for ejecting was the biggest problem. The inside that hold the shell base, was WAY to tight. It looks like the part was never even fit to go around the lip of the base of a shell. It would pinch the base & put a rip or gash there. A few min with a small file & it is now fixed. Also the 45 degree angle that the shell slips over, was not smooth as it should have been. I took out the sharp & uneven angles with the stone. Next problem is it was still getting stuck in chamber, so I had to file & stone the excess metal off the outside of the same shell holder guide, as I think it was now jamming up against the inside chamber & being pushed into the shell base & jamming the shell inside the chamber. I also had to stone the opposite shell holder guide to get that side to fit. I did horn the inside of the chamber at first, thinking it might have been burrs in there making it stuck? It did help, but I will never know if it did have burrs, as I don't have a bore scope to look. I think Quality Control is MIA there in Turkey or maybe the 12 year old's just don't know gun making?
I want to say this about that. As a owner of a semi automatic magazine fed shotgun. Always and always insure that the shells are loaded with the rims forward of each other. They will jamb every time if you don't. You will find out quickly if you didn't.
I want this more then the AR 15's everyone else are getting !! Love the Idea of a 15 round clip fill with 00 ought buck or alternate with buckshot and slugs . The serious look of a AR 15 with the easy to find Ammo of 410 shotgun shells its Genius . In an APT. you could load with #4 bird , rabbit shot and not worry about thin wall penetration into the neighbors but still effective stopping power !!
Lol, learn the difference between a clip and a mag.
So much for easy to find
@@michellen5704 Yeah that was a yr. ago so now things suck even more ...
@@DeadShred9 it’s hard even finding 20 gauge duck loads let alone 410
Finally a detailed review of this, thanks!
Thank you
Awesome, birthday coming one week!!!
Blowback like 22lr, thanks for the vid!
Ervin Baker wrong
Ordered one 4 days ago. waiting for it to get here. But I will be patient because we are having a heat wave 100 degrees out for the next two days. Yep I can wait.
Haha, yeah not the weather to run out and shoot in if it can be avoided
I JUST WON ONE OF THESE!
Congrats! They're tons of fun! Have you seen our shooting impressions video?
Hey James one year has past. What is your opinion?
Levi Vanzant he still hasn’t gotten out to the range yet
We have and long ago. RUclips deleted our first video, it has been uploaded again.
American Made too!
Wrong. They are imported
That would be a good home defense option, even better in AR pistol format.
Bob Wampler I agree plus the fun factor for 410 is off the charts. My older boys can help but laugh every time we shoot the Taurus Judge at a shoot n see targets with #6 birdshot. Plus I saw a Paul Harrell video about 410 birdshot out of a good length barrell at close range is nasty with minimal chance of over penetrating walls
No it wouldn't.you'd be better off with either a regular 556 or a standard 12 gauge pump/ semi auto. That said 410 is the only shot shell that's size effecient for mag feeds systems. Most 12gs and 20gs are limited to 10ish rounds in the size of a 30rd magazine. In 410 bore you get about 20.it is a neat idea but with how anemic 410 is compared to ALL The other options available in the ar15 platform.unless you for some reason cannot use a rifle it just seems like a novelty.
@@MrAutochamber shotgun barrel length after 10" does minimal to increase accuracy. It literally only brings you that much closer to the target.it used to be the thought it somehow kept the patterns tighter but that is incorrect.all you need to do is allow the powder to burn after that a longer barrel is just a p.i.t.a. to shlep through the woods.look at turkey hunting shotguns. A few years ago anything under 28" just was not suitable as a turkey gun. And specialized models had VERY, VERY LONG BARRELS. 30" being the standard and it wasn't impossible to find 36" and longer still.the length that we thought was helping us make those 35-45m shots was actually just getting banged around on branches and rocks all to save us what amounts to 1 good step forward(or calling the bird in a foot or so closer). Newer designs are sporting shorter and shorter barrels. Im pretty sure mossbergs new gobblestopper come with 20" barrels and I know I've seen an 18" gun camo'ed up and ready to go in the hands of a person I've successfully hunted with several times.times they are a changing I guess.
Youd need a rifled barrel to squeeze into pistol defintion
@@thebowtieguy777 not necessarily.... You could always cut straight "rifling" and it would fall into the "firearm" classification without barrel length restrictions. Shotguns are classified by their smooth bore. Rifles by Rifling that causes the bullet to spin.cutting grooves along the long axis avoids both definitions and a " firearm" is born.a couple manufactures have gotten away with this in 12 gauge sbr length ar-15 ish guns.
There is no point and its borderline useless...I'll take ten 🤣🤣🤣🤣🤣. Cool gun, good vid 👍🏻
This is op buddy best for home defense. Then you have one for long ranch too 😉
It would be nice if ATI would sell the upper separately along with the bolt carrier assembly and buffer/spring
tekteam26 they dont? I have a omni limited 556 n i was thinkin upper buffer n spring but you say no??
Wow, very impressive versatility. I would go with one of these throwing slugs. Lovely tool, time will tell. Nice share. Thanx
Years later it's still a great gun, though with the price of .410 we don't shoot it too often.
@@GBGuns years?, I'm just running into it lol said the blind man.
@@mikecarroll5853 check the video date. We've had this one a while, made a few slightly-newer videos on it too. I'd do more but ammo... :(
Can you shoot 45colt out of these rifles, like the judge or governor?
On the manufacturers site it says you can not.
Oh wish i could get one in the UK nearest we have is hatsan escort types 12 gauge great video
I just saw the AR 410 last week. I’ve been trying to find them to purchase. No luck so far. Appreciate any suggestions on where to shop.
Grabagun just advertised them this morning
Going to get one. I need one or two.
Willie Greene you mean 5, this way you can leave one at family members house, bury 2 in different locations keep one in the vehicle, one at work (in desk or in the tool box) or both if youre a shop owner.... And one in the house, in the bathroom.... Its polymer somebody's gonna shit regardless.
That's Awesome!!!!!!! Can it be made Full auto???????with the proper paperwork of course
Awesomeness!!!!!
I would love to see how the slugs compares to a 458 socom... I just found my reasonably-priced big bore AR (fun/home defense ) I think
While it is a fun/home defense round, .458 is a lot more lead moving a lot faster
.410 slug is close to the .357 in power I believe
Ted Sell
Wow that would be awesome if it is true. The longer barrel gives it some validity to the all important muzzle velocity
Graham, I just bought one of these .410's hoping I would be as happy as you are. Mine ,however does not function well at all. The spent rounds do not eject from the bolt and jam in the chamber. I know that is not your issue and so far ATI has been receptive to my concerns. The odd thing is that the detail on your gun looks completely different than mine. My lower has the ATI logo but not the words "Omni Hybrid." The enlarged trigger pin bodies are absent. Your bolt carrier group looks completely different than mine. It's almost as though I have a different gun. Currently, my upper is in a box on it's way to ATI for repair, maybe replacement (I hope).
It's been a few years since we made this video, I wonder what and why parts changed. I also know that over the years there have been completely different .410 uppers imported and sold under a different name. Unfortunately we don't have any connection with ATI so can't help you there. I hope they take care of you.
Their making AR uppers for everything now.
I really hope i can get this on a FAC in the UK, we can own Saigas and other magazine removable shotguns. They recently banned 3000 GBP (5000 USD) guns with lever release catches near the selector AR's which would allow us to have close to semi auto AR's in the UK as they were scared criminals would get their hands on one of like 20 in the UK 🤨
I love it can't wait to get me one
This is awesome, where I'm at we are not allowed to hunt with rifles. This little invention makes it so I can hunt with an ar-15 if I want to.
seigatron a 410 slug will bring down whitetail sized game better than 223 anyway. A 410 slug will penetrate brush a lot better than a 223 too.
I love it! And I want one!
Smooth bore Bernal made in turkey is all that i see on the upper. Anderson mfg Hebron,NY Multi cal on the lower.
Always wanted one in .410.....
I wonder if i could just swap the upper for the 223 upper that way id have a 410 when i want and a 223 when i want
Yes you can
Sweet!
Did you try the upper on a standard lower? The magazines are way to tight on a Matrix arms lower I planned on using ( also tried the mag on a Anderson lower and 2 billet lowers, way too tight without the mag being loaded even). The magazine notch/ramp thing on the ATI mags make them way too tight of a fit.
Oh yea, someone had to make one, hell yea!
Think I need one!!
Looks like something I could use. Ray
You're telling me I can attach this to a fitelite scr lower? Sold
Cool but can't get that 15rd mag anywhere. Bought this about 4 months ago still waiting on mags.
+Matt Cobretti have you tried ATIs website? I just got one last week
dammit i just bought a shockwave in 12ga and now i need something else now. liked and subbed. nice intro with dawn patrol:}
Be interesting to see a converted Saiga .410 Vs this
I like it. That's a .410 slug, almost a .45, but not, coming out of an AR going 1800 fps. That's 787 ft/lbs of knock down power. Far better than a 1911 in .45 cal. Even better than the 10mm. Almost as fast as the 5.56mm, but not, and shaming the .223/5.56mm to the back of the bus in stopping power.
No not as powerful as a .556 look it up
Yeah, right, the long range .22. Granted it doesn't have the range, but at close range it will put a far bigger hole in the assailant.
Def not as much lbs energy as 556 nato. Do you even rifle smdh
Well that sounds pretty realistic if that is the true muzzle velocity
You never looked at the buffer and spring.
Any chance ATI will be selling just the upper?
Yes they plan to once they get caught up on the complete rifle orders.
No. Enticing if you can put the upper on any ar lower?
Well, I had a very, very bad shooting experience with this weapon, it would not feed, and after sending it back twice, and 6 months later, with lots of threats from me, I thankfully got my money back. I am sure some have had better luck.
I've watched two videos on this shotgun and not once did anybody cite mag capacity... I found out in the comments section. Maybe I missed it being mentioned...idk.
I don't bother with spec numbers, but include links to the manufacturer's site in the articles. Article links are in the video description.
I'm looking for one.
I want one! 😍
This would make a great plinker, varmint gun, and youth hunting gun. How is the recoil with the various 410 rounds compared to an AR15 in 223?.
I'd say about the same. It's there, but negligible.
I want one of these
I'd be interested in purchasing an upper if there are some ammo / upper combinations that run well with the stock 5.56 buffer and spring? I already switch out uppers for different calibers without making changes to my lower and it would be great to have this convenience with the ATI .410
i asked for this type of gun at gun shows in Canada for at least 15 yrs, i`m 60 and have hunted since i was 9yrs old, this just makes sense, on 5 shot clip with game shot the other with defensive slugs for bear protection. I`m aboriginal, [Metis] and had to kill a bear with my 22 when i was about 14 nearly didnt survive. Used my browning break down 11 shot semi-auto, if it wasn`t a semi-auto i ould have died, but the bear died literally at my feet with the gun barrel touching his forehead lt few shots. Still own that 22 and its a collecter gun now
I don't think I've ever seen a store out of 410
come to kentucky
So, the upper along with OEM magazines and a buffer and buffer spring work with any AR 15 platform; regarded you swap out the buffer and spring? I assume so based on the limitation on shotshell length... Anyway, cool!
Yes, it's intended to run on any lower assuming you use their spring and buffer.
I understand it was three years ago, but what was the price of that upper
Will a 45 long colt be available?
Me likey:)
Have you tried shooting .44 rounds through it?
Ive heard some do it in single shot
.410
Only if the barrel is a good solid piece ive cracked my 410 barrel doing that before
Is the barrel rifled? Can a Sabo round from it be made fairly accurate using more powder and a actual proper FMJ? Just curious how worthy this is of my love compared to the m16a2 which I became very intimate with in the corps. Semper fi
Are the lowers milspec? Because these in full auto would be extremely fun.
Yes, in the tabletop I go over those details.
So sweet
My grandmother deer hunted with a bolt action 410 an she got deer
I only watched to see how you remove the bolt carrier and you skipped it. Thanks for wasting my time.
Just like an AR. It's also in your manual.
What they mean by "short piston" is Basicly the d.I. system we already know in the ar15.more accurately described as "micro or nano piston".the "piston" is on the bolt extending just into the end of the gas tube at the breach- the "gas key" .Calling the ar15 "direct inpingment" is at best a simple misnomer or more sinisterly a marketing ploy by stoner to make the ar15 seem more modern to get away from the piston machine guns of the era it was invented in.true D.I. has gasses venting right into the bolt to push it back.not how the ar's work using the gas key system.
410 is probably the only shotgun worth running in a mag fed shotgun. Size+weight vs capacity is just silly with 12 and 20.
I don't know who first assigned the term direct impingement to the AR10 or AR15 but it certainly was not Eugene Stoner. Read his patents.
Will the American Tactical ATI Omni AR 410 Shotgun cycle 1200 fps Winchester AA?
I want one of these so bad, but they are out of stock everywhere I look. Any ideas of where I could find one?
Does anybody know the price? Seems like a fun gun to own!
Wanting something like this for my mother as home defence. Does anybody here have any input on recoil? It will be for a 75 yr old woman with arthritis and osteo perossis. Thank you.
Have you tried .45/70 in it.
Mine keeps Jammin center back for repair it's still jams what a piece of junk they can't seem to get it right what's the point in constantly sending it back
Is it with a specific load type? What is the malfunction?
How has it held up over the years? Any new opinions?
We've done a couple follow up videos.
GREAT VIDEO HOW MUCH IS IT OUT OF THE BX THANK YOU & RANGE
So is the ATI magazine the only magazine that can be use on the ATI 410 rifle?
Why are magazine witness holes always on the wrong side?
One of life's greatest questions
Lol! My 33 round Glock mags have them on the rear of the mag.
You try aksa crossfıre 410.
Can you load 2 1/2 triple 000 shot gun shells on the mag. I have an ATI mag that won't allow the triple 000 ammo to load. What are your suggestion?
You did not explain the different buffer and spring needed
It comes with the gun
Have they done one on full auto yet?
I wonder if it'll shoot .45 colt....
Nice
Can u use a 300 black ops lower with that too
I don't know about using that AR to introduce someone into shotgunning if you want introduce someone into how to use a shotgun you are better off using a pump action shotgun because it takes a completely different skill-set to use a pump action shotgun then it does a semi-automatic shotgun
классно
What does this go for? Would love to own one.
That is not a standard BCG, maybe that had something to do with the good performance
This is what came in mine. The gun may have changed since I made this video, it is a couple of years old.
Graham Baates I thought they treated you to an upgrade, sure looks slick compared to mine
Thank you for responding
I wonder if the magazine will hold and feed 45 long colt..hmmm lol
Did I correctly understand that this weapon is gas operated?
I genuinely don't care for the 2&1/2 inch shells. I prefer the 3 inch shells that I carry in my Bond, and would honestly prefer something that is going to give me uniformity of ammunition. This doesn't do it.
Can the bcg and parts be put on a different upper for full custom builds or is the upper machined differently this would be a really cool set up built from a skeletonized receiver set with a Hera cqr stock set
I too would like to know this. Have you found anything out?