BADGER - Introduction to Airbrushes part1

[@BigAndTall666]

Badger is a excellent brand, i have Models; 150, 100 XFG, 100 side feed (left handed, special edition) and have NEVER experienced any technical problems like split nozzles/tips or bend needles, best value for money!

[@derdom1862]

im lefthanded too and also owner of an 150. I love that thing!

[@aspenk3682]

Do you also have the bent adapter like he does in the photo for the 150? I can't find it anywhere and can't attach my hose to the pen without it.

[@aspenk3682]

​@Der Dom do you have any suggestions for the adapter from the pen to hose hook-up?

[@simpernchong]

My first model was Badger 200... I haven't done airbrushing for decades. This video brings back nice nostalgia.

[@SlumberMachine]

I started airbrushing a few years ago and have a badger 155 Anthem. The thing is a work of art itself and is build like a brick chit house. Plus it is pretty good for beginners. My biggest issue is getting the right consistency with the paint itself.

[@thomasgronek6469]

the first two models can be used as a single action, by using the adjusting knob as a trigger set. by turning the screw in, one can control the spray. if there isn't enough travel, reset the needle to respond with less travel, then when the screw is turned, that will push the trigger back. after the desired amount of paint is attained, just push down on the go button, and you are now using a single action.

[@sydrider6023]

Really informative! tks!

[@BigAndTall666]

@liwiathan if you´re thinking of the "angled piece" on the air hose it is actually just the standard end connection of the hose itself the other end being straight, some of the newer air hoses have straight connections at both ends so look for a slightly "older" (still being manufactured though) version of the air hose. -Check badger.com for parts and equipment!

[@aspenk3682]

Thank you!

[@anthonyleedickinson3491]

Nice video. I just got an airbrush set with compressor. I plan on paint custom consoles with it though.

[@RT1200BIKER]

Superb introduction... thank you very much!

[@liwiathan]

Where did you get the right angle piece?

[@CloodyTube]

good ones are dual(double) action gravity feed airbrushes.cheap acrylic colors are createx.i have a iwata revolution br airbrush and it works perfect for papers and canvas but you can buy a cheaper one too.btw i am a grafiti artist too:)

[@BethWarren-tz4qh]

Can you use the Badger Airbrush 350F-9 just as an Airbrush without paint ?

[@RaiserBlade00]

awesome! Jeff Bridges just taught me a lesson on airbrushes. ;)

[@cyrusgraham292]

Purchased a Badger at Phoenix Art Supply in Phoenix Arizona year 2000

[@elation0x]

"this is what an airbrush is right hmmmere...." 0:46

[@Sturmavk]

It would be nice if the airbrush and compressor industry didnt like to keep the sizes of their compressor connections, hoses and adapters a "trade secret". over 90% of the items I find online totally OMIT the size of their connectors, hoses and adapters. On top of that the adapters you need you simply cannot find online. Seriously is there some secret war raging in the industry, that impels the makers of these items to keep the size of their products a secret from the general public?
I've been trying for 2 straight days to find out what I need to do to connect a California Air Tools 6300 Compressor to a Badger Gravity Airbrush and Gravity Braided hoses. It's a futile endeavor.

[@jamesmiller3292]

The sizes are not trade secrets. They use 1/4 and 1/8 NPT connections. Can also get the connections and adapters at any auto parts house cheaper then going online.

[@saschiver]

No wonder its so dear. I got my badger 200 and compressor today, £200, just need to learn how to use it. Always wanted one.

[@SingleTrack66]

How did you get on ?

[@saschiver]

@SingleTrack66 yea got on great with it actually. In the end I gave up on my 40yr hobby, getting on so this is my time. Great airbrush, very easy to use..

[@mynorroldan9294]

what psi..are you using with the single action

[@JMPhotography91]

It's Chuck Norris.

[@zyechartorisky9879]

JMPhotography91 Bob Norris

[@bernadgunt]

Wkkkk 😂👍

[@eliasreyesarteaga471]

It's your Mom!

[@sashaleefonseca8343]

Thank you

[@BigAndTall666]

@ElCholoMasChulo Look at the end of your needle, how many grooves does it have? -None or one groove means fine, two grooves means medium size, three grooves means large...You need a tip that matches the needle, F, M or L, simple as that. :-)

[@liwiathan]

@BigAndTall666 Ah, will do, thanks.

[@jodymccuiston2654]

What the of air brush uses strictly air?
What type of air brush uses just air?

[@roncasa4042]

👍👍🎈🎈😁😀

[@elouahabisaid6573]

Waw

[@martinlaird4738]

I bought a Badger Model 200 set and its my first airbrush and it only sprays out air, it sprayed paint once but it just exploded everywhere! I need help!!!!

[@MrGeeMan1980]

Check needle adjusting screw. That's what controls the paint flow. Turn the needle outward more paint flow. Turn it in, less paint flow. Another thing, make sure your paint is very well mixed. [paint] Too thick clumps and clogs flow. Hope this helps.

[@jamessteven711]

I have the badger 200 and no matter what I do I can't get the paint to come out....

[@bizzyfingers]

@yameroify did you ever get one?

[@jcots1959]

Can I use pottery glazes in these air rushes ..? Thx

[@sovietrussia2804]

Jules C no I do not believe you can use pottery glazes in a airbrush

[@AngelaLamson]

Help! I have an external siphon feed brush, and I can't get my paint to come out. I have successfully sprayed a cleaning mix, but can't get the paint. I can see the paint going up the tube to the airbrush. I have fully opened and closed the nozzle, but that doesn't help. I don't think the paint is too thick, especially after this video, which says my style airbrush is meant for thicker paints. Any helps?

[@ZoidFile]

+Angela Lamson I have the exact same problem. I can only spray water or very, very diluted paint, so diluted it will only cause droplets and is completely useless.
I also have the feeling that some air is coming out on top of the airbrush, right under the "lever" and I don't think that is normal.

[@AngelaLamson]

+ZoidFile I worked it out. It was completely plugged. I have it a thourough cleaning, and now it's working like a champ.

[@ZoidFile]

Mine never really worked to begin with, It just looks like it does not suck in any paint at all.
I cleaned it anyway, but it look like new,

[@billhall7525]

Gun camo

[@ganstaboii2332]

Same here

[@tranvankhuong2655]

Phải chi có được chỉ dản chỉnh nhiệt độ ap suất gió bao nhiêu mới gọi la chuẩn thì hai biết mấy

[@NeoCarbon77]

@RaiserBlade00 Exactly what I thought. lol This made me want to see him in Ironman again. lol

[@roberth254]

3:38 I have the same type of airbrush seen here. I have this problem that air keeps on blowing back into the jar ever time I try to use it. Dose anyone have any idea what might be wrong? I have cleaned it thoroughly several times and it is still having the same problem.

[@andersonlira5058]

Bommmm

[@stephenhargrave7922]

This fine painting sold for ten thousand yen on a sidewalk in china

[@rhanieroque6797]

my badger airbrush model 17
5-7 is for sale..

[@lupegavia268]

Lo

[@kyaiwalik8467]

who im get free a pen brush bagder????

[@cyrusgraham292]

10227 North 32nd Lane Phoenix Arizona Apartment 235, I did even know this symbol !? Had already had a name ......."interrobang"

[@rhanieroque6797]

my badger airbrush model 17
5-7 is for sale..