Old mechanic, if you ever lose the oil filler cap tool there is a backup, under the pillion seat on the screwdriver, pull out the metal part of the screwdriver and then at the end of the black handle is the same tool that fits the oil cap 👍
You are 100% correct Old Mac. About 10 years ago I asked a motorcycle mechanic why does he use a torque wrench on the bike. He said what you said when I told him I use my hand to tighten the oil filter. I been torquing ever since. I know your a busy mechanic so welcome back. Be safe. Randy
I had the EXACT same problem when removing the old oil filter on my 2014 R1200GS! Whoever had installed the oil filter last time done it up WAY too tight! It was one of the oil filters that used a strap wrench to remove. I ended up having to stab a Philips head screwdriver into it, the oil went everywhere! I always torque oil filters to the correct settings, couldn't give a shite what other people think. Love your vids, by the way!
Thank you Old Mechanic. I liked your torquing of the filter, the manufacurers know more about the bike than some man down the pub... Thank you for the timings as well, makes things easier.
11:05 thanks Old mechanic. You are right, the torque wrench is the best to do the job. Few years ago I damage my motorcycle (the oil filter lid. It was not an external oil filter) doing an oil change. After this bad experience, I never make an oil change or other jobs in my motorcycle without the torque wrench.
What an absolute gentleman. Thank you sir for taking the time and sharing your skills with us. I have a 2011 R1200GS Adventured will sort my oil and filter myself thanks to you. 🙏
Being a short guy, you and me have that in common How do you maneuver your bike? Like to push it onto a trailer. Push it up the driveway Or even picking it up when it is on its side? I am real curious. I just bought a 2011 r1200 GSA Big gas tank. Thank you
just a question. I saw that you use a copper gasket for the oil drain plug. An aluminum gasket is listed in the original spare parts catalogue. Thanks, regards, Argo
From watching your videos I am now able to do most servicing on my 2016 R1200R LC...ie. oil n filter, air filter, final drive oil and lube splines and replace plugs and check valve clearances, bleed brakes and ABS unit using Motoscan App, not game to tackle electronic front forks yet, but can one be certain even maintaining the service requirements listed that the engine is properly tuned or does that require more sophisticated computerised software only available at a BMW service centre?
Looking forward to see the Fork oil change … I have the same bike, it does make a ticking noise on the left cylinder when accelerating, does this model need an upgrade on the chain tensioner?
Hallo old mechanic. Zijn de watergekoelde 1200gs modellen van 2014-2015 goed of kennen ze veel kinderziektes? Of zou u eerder vanaf bouwjaar 2017 (facelift) kijken? Ik hoor graag uw advies.
Old mechanic, if you ever lose the oil filler cap tool there is a backup, under the pillion seat on the screwdriver, pull out the metal part of the screwdriver and then at the end of the black handle is the same tool that fits the oil cap 👍
You are 100% correct Old Mac. About 10 years ago I asked a motorcycle mechanic why does he use a torque wrench on the bike. He said what you said when I told him I use my hand to tighten the oil filter. I been torquing ever since. I know your a busy mechanic so welcome back. Be safe.
Randy
Thanks Randy 👍🏻👍🏻👊🏻
I had the EXACT same problem when removing the old oil filter on my 2014 R1200GS! Whoever had installed the oil filter last time done it up WAY too tight! It was one of the oil filters that used a strap wrench to remove. I ended up having to stab a Philips head screwdriver into it, the oil went everywhere! I always torque oil filters to the correct settings, couldn't give a shite what other people think. Love your vids, by the way!
Thanks 👍🏻👍🏻
Thank you Old Mechanic. I liked your torquing of the filter, the manufacurers know more about the bike than some man down the pub... Thank you for the timings as well, makes things easier.
Glad to help
Great video Old Mechanic! I like how particular you are with the way you do things. Keep the videos coming and keep up the great work!
Thanks, will do! 👍🏻👊🏻
Just bought one of these. Just found your channel. VOILA!!... Great work, thanks.
Welcome aboard!
11:05 thanks Old mechanic. You are right, the torque wrench is the best to do the job. Few years ago I damage my motorcycle (the oil filter lid. It was not an external oil filter) doing an oil change. After this bad experience, I never make an oil change or other jobs in my motorcycle without the torque wrench.
Thats my way of working too mate 👍🏻👍🏻👊🏻😉
What an absolute gentleman. Thank you sir for taking the time and sharing your skills with us. I have a 2011 R1200GS Adventured will sort my oil and filter myself thanks to you. 🙏
Wow thank you 🙏🏻 👊🏻👍🏻😉
Kan jij mer de hand 10 ntm vast draaien vindt ik ech knap voor de torex van de beplanting.
Moet 4 lieter in met olie filter staat in elk boekje.😂
Being a short guy, you and me have that in common
How do you maneuver your bike? Like to push it onto a trailer. Push it up the driveway
Or even picking it up when it is on its side?
I am real curious. I just bought a 2011 r1200 GSA
Big gas tank. Thank you
Tks for your video. The drain plug is a 10mm allen, not torx 55, at least in my GS 1200 LC 2018. Cheers from Mexico.
This is a 2014 😉
Thanks again my friend! You’re great, good atitude.
My pleasure!
Hi
Can any one advise about oil low pressure on r1200 gs 2014.
Red warning with 1.7 bar indications.
even oil changed 10w40.
Thanks
Excellent video many things common between us , like it 👍
Thanks mate
A great video, as always. I do want to ask if and how you reset the computer when you change the oil, or don't you do it at all?
just a question. I saw that you use a copper gasket for the oil drain plug. An aluminum gasket is listed in the original spare parts catalogue. Thanks, regards, Argo
Good evening, my name is Kostas. I own a GS 1200 2008. I want to change what is suggested.
Hello dear friend, I would like to see a video about changing the cam chain of a f800gs motorcycle. greetings from the grullo jalisco mexico
Thanks for the idea!
why not the recommended oil?
Gud video... but why take out 4ltrs and then puor back 3ltrs and faff about?
From watching your videos I am now able to do most servicing on my 2016 R1200R LC...ie. oil n filter, air filter, final drive oil and lube splines and replace plugs and check valve clearances, bleed brakes and ABS unit using Motoscan App, not game to tackle electronic front forks yet, but can one be certain even maintaining the service requirements listed that the engine is properly tuned or does that require more sophisticated computerised software only available at a BMW service centre?
Looking forward to see the Fork oil change … I have the same bike, it does make a ticking noise on the left cylinder when accelerating, does this model need an upgrade on the chain tensioner?
Did you change the oil on a cold engine?
Moet volgens mij tog echt 15 w 50 in of de boxer olie van motor Rex dat zecht iedereen moet ook in de boxer van 2006?
Excellent ❤❤❤
Thanks 😊
Hallo old mechanic. Zijn de watergekoelde 1200gs modellen van 2014-2015 goed of kennen ze veel kinderziektes? Of zou u eerder vanaf bouwjaar 2017 (facelift) kijken? Ik hoor graag uw advies.
wat is een normaal olieverbruik voor de 1200 GS ?
I am sure the sump bolt is a Hex 10, not a T55.
Je kan het ook gewoon in het Nederlands doen. Ze kunnen het ook vertalen.
My R1200GS is completely different, the oil filter being underneath.
Yours probably an older model, what year is it?
@@kamiljadczak3719 2008
It's just shy of 12 newtonmeters
42 Nm for a oil drain plug? Damn. On my super tenere 1200xt its 23 nm 😂
I think he meant 24nm… pronouncing wrong ..👍🏽😊