Это видео недоступно.
Сожалеем об этом.
Polo 6R - Removing, replacing windshield washer spray nozzles
HTML-код
- Опубликовано: 17 авг 2021
- A quick video on how to remove/replace the front windshield wiper spray nozzles on the Polo 6R. No tools required! :)
Part number of the nozzle - 6E0 955 985B
Source - Boodmo
Check out my other DIY videos on the VW Polo 6R:
1. Removing/replacing headlight assembly - • Polo 6R - Removing/rep...
2. Changing bulbs of a single beam headlight assy. - • Polo 6R - Changing hea...
3. Removing/replacing the tail light assembly - • Polo 6R - Removing/rep...
4. Changing bulbs of tail light assy. - • Polo 6R - Changing bul...
5. Replacing headlight switch, range controller unit - • Polo 6R - Replacing he...
6. Automatic headlights & coming home/leaving home lights - • Polo 6R - Automatic he...
7. Removing fog lamp assy., replacing fog lamp bulb - • Polo 6R - Removing fog...
8. Removing number plate light + OEM LED unit upgrade - • Polo 6R - Removing num...
9. Removing rear seat bench - • Polo 6R - Removing rea...
11. Attaching the front tow hook - • Polo 6R - Attaching fr...
12. Removing/replacing side AC vent - • Polo 6R - Removing, re...
13. Removing cabin light, upgrading to better units - • Polo 6R - Removing cab...
14. Removing/replacing interior rear-view mirror - • Polo 6R - Removing, re...
15. The OEM Emergency Warning Triangle - • Polo 6R - OE Emergency...
16. Removing the boot lid/tailgate trim - • Polo 6R - Removing the...
17. Repairing broken headlight mounts - • Polo 6R - Repairing br...
18. Removing interior grab handle - • Polo 6R - Removing int...
19. Replacing rear wiper and wiper arm cap - • Polo 6R - Replacing re...
20. Installing door striker plate covers - • Polo 6R - Installing d...
21. Replacing front windshield wipers - • Polo 6R - Replacing fr...
22. Changing the stock windshield wash reservoir cap - • Polo 6R - Upgrading th...
23. 1.6 TDI service - Part 1 | Intro - Parts and Tools - • Polo 6R 1.6 TDI servic...
24. 1.6 TDI service - Part 2 | Changing cabin air filter - • Polo 6R 1.6 TDI servic...
25. 1.6 TDI service - Part 3 | Changing intake air filter - • Polo 6R 1.6 TDI servic...
26. 1.6 TDI service - Part 4 | Changing fuel filter - • Polo 6R 1.6 TDI servic...
27. 1.6 TDI service - Part 5 | Changing engine oil - • Polo 6R 1.6 TDI servic...
28. 1.6 TDI service - Part 6 | Changing oil filter - • Polo 6R 1.6 TDI servic...
29. 1.6 TDI service - Part 7 | Reset service reminder - • Polo 6R 1.6 TDI servic...
30. 1.6 TDI service - Part 8 | Wrap up - • Video
Great thanks
Thank you! The channel is very helpfull
Thank you for the feedback. 😊👍🏻
Thanks
Tq so much sir your explain is very good
Thank you Sahil. 😊
Thank you
You're welcome! 😊
Nice video. I'm also a proud owner polo gt tdi 1.6 2014 model. Following your team bhp thread since you bought the car. Great upgrades and you teached alot of things.
Thanks a lot Vinayak. Appreciate it. :)
@@GaneshBalan welcome
Thanks Ganesh x
very informative all of your videos
Thank you. Really appreciate the feedback. 🙂👍🏻
excellent.informative
Thank you for sharing 👌☺️
Nice DIY! Heard you sold your polo. Curious to know what you replaced it with.
A Jazz VX CVT.
@@GaneshBalan Cool buddy🙌
Hey! Thank you for the video! I'm a girl from Sweden and Polo is my first car. Unfortunately couple of days ago when I tried to change the nozzle, the locking mechanism (elbow with black locker ) cracked. In the hignsight I should have known better than changing the nozzle on the street at -10, but I was desperate to get some cleaning liquid on my dirty window standing on the curb of the road (nozzle was missbehaiving, got full of crap, I think, so I bought spare, just didn't manage to change). So now the black locker on the elbow is broke. I ordered the new one and waiting for it, but the old one seems to sit super tight in the pipe, how does one remove it? Pure force? And even if I remove it, how can I put new locker in the pipe, is there any tips? Maybe some hot water to expand the pipe end? Thanks for all advices! Girl needs to learn nowadays
Hi Holsheftn (how do you pronounce this? Holshefen?).
The locking mechanism of the nozzles on the Polo are a joke, really. It is a press on type and you have to just unclip it with force. Nothing else.
Do you have some WD40? Spray it around near the clip. Although WD40 is used to loosen hardened fasteners like nuts and bolts, sometimes it works for cases like this too. Try it out.
I did not clearly understand the locker in the pipe part. You mean pushing the hose to fit the nozzle? Are you going for an aftermarket hose?
nice video, was looking for the same..
👍
Can u pls share the link where we can buy best windshield water jets
Hi Vamsi, I just checked Boodmo and it is out of stock.
boodmo.com/catalog/part-washer_fluid_jet_windscreen-5968619/
Please check with your local service centre. They will have a few in stock. Alternately remove the stock ones from your car and immerse them in a tumbler with vinegar for 2-3 hours. It’ll help in removing the scales and deposits inside the nozzle.
@@GaneshBalan Thank you 😊
I was able to remove the nozzle, But unable to push it inside the bonnet slot ever after a lot of force (push). Does the 2 curved hinges on the nozzle suppose to be flexible?
Palash, it takes some effort to push the nozzle back into the bonnet. The hinges have nothing to do with this. Push them with some force at an angle and it should slot right in. You should have figured it out by now I hope.
Same problem with me...i applied all the force in the world but unable to install them back
@shubhambhardwaj1925 Take it to the authorised service centre.
My Polo’s rear windshield nozzle needs to be replaced.. I think the rear one is different from the front ones but I am not sure.
Hi Binod, the rear windshield washer unit is very different from the front units.
@@GaneshBalan Thanks! My rear windshield nozzle was blocked and had to clean it. It's working fine now. However, I tried removing it after removing the rear stop light assembly. The nozzle is attached to the light panel. I tried everything to remove the nozzle but I could not. Nonetheless, merely cleaning the nozzle worked. It was chocked with hard water deposits.
@@binod049 Please use RO water instead of tap water. Tap water contains salts which will get attached to the pipes and the nozzle. Can become a major pain to clean.
The black tab on my pipe broke. Where can I find the replacement sir ?
Hi Gurcharan. Which black tab are you referring to? On the nozzle? Can you send a pic to my mail ID - ganesh.amrita@gmail.com. I can guide you better.
I lost one of those tabs. Do you know from where I buy those?
Which tabs are you referring to?
@@GaneshBalan the black tab sir
How to change the leaky nozel pipe
Gurvinder ji, the tubing can be completely replaced with aftermarket tubing. I have replaced the stock one on my car with Toyota’s tubing. Please check the post here -
www.team-bhp.com/forum/long-term-ownership-reviews/142745-vw-polo-gt-tdi-ownership-log-edit-8-years-170-000-km-update-79.html#post5096017
Are Gannu bhai gaadi chali ..... pum pum pum
Kya hua abhi? 😂
@@GaneshBalan kuch nahi brother ... Read u on teambhp ....
I think u r same Gannu bhai of teambhp .. 👍
Keep it up brother 👍
Hats off to ur love towards VW
M also a proud Polo tdi owner 🙏
Hey man, yeah. Same guy. Thanks a lot. 🙂👍🏻 How’s your Polo keeping up?
@@GaneshBalan Polo is doing great brother... Really love to drive and maintain it 😀.
VW Lovers ❤️ (I always feel that Polo is same like my iphone 5s 😂 - compact and powerful) 🔥
Lovely little car it is. Just wish VW launched the latest model here with the 1.5 TSI engine. Obviously due to the 4m rule limitation, it will go into a different tax bracket and won’t find many takers at the 15-18L price bracket.
Nozzle locking mechanism ( black tab) broken. Nozzle can't be locked properly. Wher to get the new one
Hi, you’ll have to change that nozzle I’m afraid.
@@GaneshBalan does that white colour attachment btw pipe and nozzle...comes with the nozzle itself?
Yep. That’s a part of the nozzle.
@@GaneshBalan ok 👍 thankyou