Props to you on your max bro. I have a 98 Lexus GS 300 and was looking to get a BMW like 530 or 335 but seeing this is making me consider getting a 6th gen max!!!!
Thanks bruh. Great choice man, 6thgen 6spd transmission is very strong and it has a lot of options like power seats, heated steering wheel, heated front and rear seats, and other things. I personally love them because of the luxury and performance it offeres. Good luck finding a good one with low mileage for a decent price.
Looks like you need valve seals on the valves that go to the drivers side of the exhaust. That's what is nice about dual exhaust. Looking good bro keep it up. 👍🏼💯
That's what's up! Shit looks nice. I was tying to Decide on what vehicle to get between maxima 2004 or g35 2004 and Tl. This video helped me make up my mind
I'm still to do a tune and install my intake manifold spacers. The only check engine light I had was the O2 sensor and the MAF sensor from a previous incident. I extended my wires and cleared the codes so everything is all well. But that was my car man, I can't speak for yours.
You have to run an regular foglight harness with a HID kit. It's powered from the ignition and controlled with an on/off switch so that you can turn it off at night because it will shine directly in other motorist eyes. At the time they didn't have the bulb for the housing so it modified a H3 bulb to fit it. I left room for the heat to escape because the first ones melted from the excessive trapped in the housing. Since I've modified it this time for the heat to escape it hasn't melted
Yes if you pull off your 04-06 trunk lip there will be holes that the 07-08 spoiler does not cover and you'll have to pay a bodyshop to cover and paint the trunk over. I've seen guys install the 07-08 on the 04-06 spoiler but that's you're only other option. You can get it colour matched for about $120 shipped off of ebay.
Nice man, 14s in 1/4mile is nice for a 4dr sport sedan, mine is automatic but I love the sound off the vq35de, do you have any tune? you have your check engine on right? the magnaflow cat is not enough? or is because the EGR system delete?
I probably went one week with that set up and went and got a huge as resonator from Magnaflow and not long after a Magnaflow catalytic converter just to show incase I got stopped. I drive my car daily so the excessive noise pollution and smell of gas was just unacceptable. Got nuff codes during the process though and had to change my four O2 sensors and MAF sensor. Got rid of most of them except for the disabled EGR and the one for removing the three cats. The codes came off on its own some how.
I'm not sure what car you have but if you have a VQ35DE you can just get a catback with the magnaflow mufflers and the sound would impress you. I modified my system a whole lot because it was loud,and poluting the air meaning smoke like crazy.I added a magnaflow resonator and catalytic converter and it ruduced the sound a good 40-50% and now i'm happy.The CAI isn't AEM,it's a HPS and I got it from Ebay.My exhaust cost me a ton of money because I wanted it to be soft and perform at the same time.
Yes it is. The Altima's and Maxima's carry the same VQ35DE engines so it bolted up with little to no bending. You can find it on Ebay under the 02-06 VQ35DE Altima headers performance headers. The prices may vary so look for the correct one. Do your homework and inquire before doing this performance mod to your car because when you do the performance headers your car won't pass emissions again and you'll have troubled codes
when u disable it do u get a code r the car burn fuel different ? i have seen that u dont use o2 sensor and the a/f ratio sensor do u relocate them to stop car from burning to rich ?
Thanks man. I think it's a 20% in the rear and 35% in the front. This is an expensive tint and I have black interior so it will give a different effect. If you have a different colour interior then you should tint your car according to the interior, meaning if you have a tan or light colour interior it will appear lighter than it actually is.
With the headers did you feel any loss of torque? (because you dont have the pre-cats) you only have just one cat (the stock one)? btw I love the sound, I want that loud sound for my maxima, thanks
I"m getting 21.7mpg which is pretty good for a modded car with no tune. I'm saving at the moment for a tune so I'll see if the mpg will change Dylan Murphy
Yo Jason I got a question bro I have a 04 Max I notice @ 1st u had that mini rear spoiler which also I have right now but I wanted to replace it with the 6.5Gen (07-08) rear spoiler I was wondering when u exchanged yours did it leave any hole from the mini spoiler? Coz I wana get that spoiler change I like the actual 07-08 rear spoiler makes the Max hotter
What all did you get for it to sound like that? I'm looking to get an exhaust for my 04 Nissan Maxima and I was wondering what all you put into it to sound like that and how much it cost?
Hey jason quick question so i was looking at the ebay mufflers and i see two of them are around $180 and others for $300-$350. they look the same and both say stainless steel. which one should i buy ? both r the same quality arent they ? they just e bay exhaust ? thx let me kno just got a job and want an exhaust for my maxi :) lool thx
Understandable, but if you look at the title it will explain why you see a service engine soon light. The 04 Maxima's comes with three catalytic converters and the performance headers has none for ultimate performance. Also because the O2 sensor inlet is difference from the performance the O2 sensor wires had to be extended. Next is the EGR valve, that was disabled because it was a lot of work to drill the header because the EGR valve is I think brass or copper. So with mods this is normal
If I just want that real low 'vroom' or whatever you call it lol can I put just the mufflers, and replace the resonator? I'm also looking to put a CAI in mine and wondered where you picked up your AEM one. Appreciate any help :) oh and 'service engine soon' haha. BTW that car was ... LOUD!
Were your headers just stock altima's. because i found obx altima 02-06 headers. i just dont want to buy something thats not going to fit. which ones do you have?
I want them on my 05, I have a intake and ebay catback, how much hp will gain? its a 5 speed btw. Other ?, its hard to mount them, i did my timing chains alone, its harder than the chains?
Nice man, sounds aggressive but very loud for daily driving your right lol. Nice though. Good Tune will do wonders for the car. You can easily see 260+ to the wheels with those mods and a good tune. I used the UpRev software because I needed a tune after changing cams, but I was able to get nearly 300 whp/wtq out of an all motor stock shortblock VQ35(2006 VQ35/6-speed with Injen cold air, Cattman Headers, Ypipe, Magnaflow catback, NWP spacers and block plate, JWT S2 cams, Supertech valve springs, Osiris UpRev tuned- 296whp/289wtq) best ET 12.92@ 112. Never had this one on slicks, street tires only.
I made 253whp 255wtq on dynopack which is about a 5-6whp less than dynojet so you're right. I have a 4" maf with 570cc injectors, ported IM to put in and hopefully drop the tranny and replace it with a stg3 Action clutch and lightweight flywheel them retune that bitch. Got big plans for her but it's hard especially now that I have a car with financing. But real shit if I ran 12.9 up here nobody could fuck with me 😂😂😂
You can definitely get it there. Mine was more along the lines of the weight of an Altima though, as I did a rear seat delete, removed a lot of sound deadening material, deleted rear trunk area carpet and paneling etc. 3319lbs with about 1/2 tank of gas track ready. Also, smaller wheels made a huge difference for my ETs. Running on some lightweight 15" wheels was worth 3 tenths (.3) over OEM wheels/tires. Cams were the biggest felt improvement though. Jim Wolf knows his shit bro seriously. Fuckin car SCREAMED from 5000-7750 where my ignition cut was set. The up top was insane on highway pulls, and the switch from stock 06 VQ cams to the JWT cams and associated tuning was worth nearly 35HP and 30 ft lbs.
+Joe Doole bro at this shitty cdn us exchange rate I can't afford any major mods from the US. The stg3 clutch and lightweight flywheel is all I need before I retune then I'm done trying to go faster.
Oh I didn't know you were outside the U.S. That sucks having to pay so much for parts. My ACT clutch kit cost less than $430 shipped here. And as far as the tuning goes, yea I do tune my own vehicles now. Also tune a few from our local clubs. Nistune, UpRev and Hondata are where my expertise lies though. It's not hard to do yourself once you have the software; just get a wideband and start familiarizing yourself with what AFRs do during different loads/speeds and RPMs, then start with fuel maps leaving timing alone. See what changes work and what does not yield power, then adjust accordingly and move your way up. A dyno is helpful, but you can still get just as good a tune from street pulls.
They are The 04 Altima performance headers from Ebay that has no catalytic converters. And no the O2 sensers will need to be extended for it too work. I use old wires from the Saab because it was really long. Try to do it ASAP because the longer you stay without them the more gas you'll be using and the smell will be horrible
i got a question for you my friend. my maxima cant turn on the fogs lights and the high beam, can you tell me how do you do that. the wiring diagram please. sorry for my english.
That's how they design the electrical system bro. Having the hi beam and low beam on at the same time would drain the hell outta your battery. I mean for what reason would you need hi and low beam on the same time? More bright? Upgrade the bulb to a 8K HID bulb or add a HID kit to your fogs.
Hey mr jason lyrics...I have the same car 6 speed....so far I only installed the Intake....I wana put some headers....but im afraid how will that affect my gas milage bad? Good? and how can I erase the codes? How many sensors do I need to fix in order not to get chek engine light
I'm in scarborough. That video was actually taken in brampton off of dixie. I have the ebay N1 catback with the magnaflow mufflers and it was the best sound ever. I'm adding all the bolt on's mods to see what she does on the track so that's why I added the headers. It's so loud that I want to reverse it ASAP and accept my loses. Yo if you're down for some drag at cayuga in the next two week hit me up man. A bunch of altima's do it every so often. Link up
I'm getting a black 04 maxima for 2k with 110k on it . I was only gonna get it tinted and paint the rims. Are these cars naturally quiet. My camry sounds like a fucking race car rn so I want a quiet car atm
It seems that you're right bro. I don't see the one I bought and the ones I see comes in parts. I guess that's your only option other than the overpriced Racingline Pre-Cats
If your car sounds like this then you're obviously going to have performance. The mods that I had was the Ebay N1 catback, Ebay 02 Altima performance headers, CAI, and Magnaflow mufflers 14816. It will cost quite a bit of money to achieve this so my advice to you is if you don't plan to race your car don't do it. Do the Ebay N1 catback, CAI, nwpengineering BOP and the Magnaflow mufflers.
Hellz yeah man. I just gotta get a few weeks at the track and see what's my best time then i'm going back to show mode. The car look aight but when the kit and the 22's are on it's just constant attention. I'll still race with the bodykit just switch out eh rims.
Yes I do have burning too rich codes and I think it's because I had a defective MAF sensor that I neglected and by the time I changed it along with the engine the car started burning rich after. I'm really pissed because I really didn't know if I didn't change my MAF sensor I could mess up my O2 sensors. I extended my two lower sensors and I didn't have any problem but now the car uses fuel like freaking crazy. It never ends. I've had it up to here with replacing shit. FML!!!
It amazes me how many youtube mechanics are telling you that you need valve seals and that you are burning oil 😂😂😂
Props to you on your max bro. I have a 98 Lexus GS 300 and was looking to get a BMW like 530 or 335 but seeing this is making me consider getting a 6th gen max!!!!
Thanks bruh. Great choice man, 6thgen 6spd transmission is very strong and it has a lot of options like power seats, heated steering wheel, heated front and rear seats, and other things. I personally love them because of the luxury and performance it offeres. Good luck finding a good one with low mileage for a decent price.
Thanks man, I appreciate it, you max is clean
I will start my project soon
Looks like you need valve seals on the valves that go to the drivers side of the exhaust. That's what is nice about dual exhaust. Looking good bro keep it up. 👍🏼💯
How u gunna tell if the driver side needs valve seals when there's a Y pipe
love it good job leave it like that it gonna tune in with engine after a while great job....
That's what's up! Shit looks nice. I was tying to Decide on what vehicle to get between maxima 2004 or g35 2004 and Tl. This video helped me make up my mind
sick ride dude!
I'm still to do a tune and install my intake manifold spacers. The only check engine light I had was the O2 sensor and the MAF sensor from a previous incident. I extended my wires and cleared the codes so everything is all well. But that was my car man, I can't speak for yours.
You have to run an regular foglight harness with a HID kit. It's powered from the ignition and controlled with an on/off switch so that you can turn it off at night because it will shine directly in other motorist eyes. At the time they didn't have the bulb for the housing so it modified a H3 bulb to fit it. I left room for the heat to escape because the first ones melted from the excessive trapped in the housing. Since I've modified it this time for the heat to escape it hasn't melted
I have a 07 maxima straight pipe , cold air intake , open headers , 75 mm throttle body , and it sounds amazing
Tariq Zraika where did you get the headers from
Where did you get the headers from
Those are a Satin Black can spray. It came out pretty good for can spray
Looks a lot better without the body kit man. Looks clean.
@MrArconz Appreciate it man. Yeah the best is yet to come. I just hope the cops don't buck me before that. I'll try to get some up soon
thanks trying to get faster but i will keep watching your videos
Yes I did. I used too much but it can easily be buffed
Good luck bro
I love this car it's a beast
Yes if you pull off your 04-06 trunk lip there will be holes that the 07-08 spoiler does not cover and you'll have to pay a bodyshop to cover and paint the trunk over. I've seen guys install the 07-08 on the 04-06 spoiler but that's you're only other option. You can get it colour matched for about $120 shipped off of ebay.
Nice man, 14s in 1/4mile is nice for a 4dr sport sedan, mine is automatic but I love the sound off the vq35de, do you have any tune? you have your check engine on right? the magnaflow cat is not enough? or is because the EGR system delete?
I have the same car but not like yours but I have to say u are the man......
I probably went one week with that set up and went and got a huge as resonator from Magnaflow and not long after a Magnaflow catalytic converter just to show incase I got stopped. I drive my car daily so the excessive noise pollution and smell of gas was just unacceptable. Got nuff codes during the process though and had to change my four O2 sensors and MAF sensor. Got rid of most of them except for the disabled EGR and the one for removing the three cats. The codes came off on its own some how.
I'm not sure what car you have but if you have a VQ35DE you can just get a catback with the magnaflow mufflers and the sound would impress you. I modified my system a whole lot because it was loud,and poluting the air meaning smoke like crazy.I added a magnaflow resonator and catalytic converter and it ruduced the sound a good 40-50% and now i'm happy.The CAI isn't AEM,it's a HPS and I got it from Ebay.My exhaust cost me a ton of money because I wanted it to be soft and perform at the same time.
hmmm sounds good to me....nice look wtg
Yes it is. The Altima's and Maxima's carry the same VQ35DE engines so it bolted up with little to no bending. You can find it on Ebay under the 02-06 VQ35DE Altima headers performance headers. The prices may vary so look for the correct one. Do your homework and inquire before doing this performance mod to your car because when you do the performance headers your car won't pass emissions again and you'll have troubled codes
Sounds pretty good to me. Nice
I'm buy one of those Nissan maxima se/ SL in spring and I want to know what u used to suit it up.
when u disable it do u get a code r the car burn fuel different ?
i have seen that u dont use o2 sensor and the a/f ratio sensor do u relocate them to stop car from burning to rich ?
nice set up man! I have a 5th gen automatic but currently looking for a 6th gen manual. #maximanation
thanks man ima see if i can get it or get another rims
Thanks man. I think it's a 20% in the rear and 35% in the front. This is an expensive tint and I have black interior so it will give a different effect. If you have a different colour interior then you should tint your car according to the interior, meaning if you have a tan or light colour interior it will appear lighter than it actually is.
With the headers did you feel any loss of torque? (because you dont have the pre-cats) you only have just one cat (the stock one)?
btw I love the sound, I want that loud sound for my maxima, thanks
I"m getting 21.7mpg which is pretty good for a modded car with no tune. I'm saving at the moment for a tune so I'll see if the mpg will change Dylan Murphy
Yo I got a 03 with v6 3.5 engine is it possible for those same headers to work on it
Same, I'd like to know
The 6spd's comes with 265 to the crank which is about 229whp.
Hey man love the way your max looks where did you get that grille? I've been tryin to find one like it but have had no luck :(
I just bought obx headers for my 6 speed maxima. Did you get a tune?
that magnaflow got that pop back for ya...lol... I see why you went for the N1 muffler, less noisey
Yo Jason I got a question bro I have a 04 Max I notice @ 1st u had that mini rear spoiler which also I have right now but I wanted to replace it with the 6.5Gen (07-08) rear spoiler I was wondering when u exchanged yours did it leave any hole from the mini spoiler? Coz I wana get that spoiler change I like the actual 07-08 rear spoiler makes the Max hotter
What all did you get for it to sound like that? I'm looking to get an exhaust for my 04 Nissan Maxima and I was wondering what all you put into it to sound like that and how much it cost?
Just picked up a 04 SE-R Altima for parts so the motor will be going into the maxima. Doing a little work so I'll post a video soon. Stay tuned man
hey man I have an 04 max as well.. I am wondering how you got those bottom turn signal lights to remain on the whole time.. thats sick
NICE MAX BRO.... QUESTION WHAT KIND OF PAINT DID U USE FOR UR RIMS???
@MrJasonlyrics, did you blacked out your tail lights with vht or vinyl here?
CLEANNNNNNN!!! i prefer this over a mustang
When i look them up there is a couple of different ones. Is it the one with down pipe combo?
I found a few different style headers for an 04 Altima on Ebay, which do you prefer? Any other suggestions?
Like ya max bro! Nice roar, really loud. What part of Ontario you from? I got a 04 Max as well. I'm happy with my ebay catback lol I'm in Brampton
Hey quick question, does it have to be the se-r headers or just the regular altima v6 will fit? and would the o2 sensors reach? thx
thanks man ima see if i can get it... or get another rims..
I found a few different style headers on Ebay for an 04 Altima, which do you prefer? any other suggestions?
Hey jason quick question so i was looking at the ebay mufflers and i see two of them are around $180 and others for $300-$350. they look the same and both say stainless steel. which one should i buy ? both r the same quality arent they ? they just e bay exhaust ? thx let me kno just got a job and want an exhaust for my maxi :) lool thx
Understandable, but if you look at the title it will explain why you see a service engine soon light. The 04 Maxima's comes with three catalytic converters and the performance headers has none for ultimate performance. Also because the O2 sensor inlet is difference from the performance the O2 sensor wires had to be extended. Next is the EGR valve, that was disabled because it was a lot of work to drill the header because the EGR valve is I think brass or copper. So with mods this is normal
i installed the 07 spoier and the mini is not bolted in,your ok to install!
If I just want that real low 'vroom' or whatever you call it lol can I put just the mufflers, and replace the resonator? I'm also looking to put a CAI in mine and wondered where you picked up your AEM one.
Appreciate any help :)
oh and 'service engine soon' haha. BTW that car was ... LOUD!
Were your headers just stock altima's. because i found obx altima 02-06 headers. i just dont want to buy something thats not going to fit. which ones do you have?
Have you had any issues with authorities due to the loudness of your mufflers? I like the sound, it's pretty awesome and powerful.
Using gasoline or other method? Trying to take off paint off mine
Damn! That sounds so good. Love this ride of yours. I may have to get a matching Max to go with my Alt. Lol
I want them on my 05, I have a intake and ebay catback, how much hp will gain? its a 5 speed btw. Other ?, its hard to mount them, i did my timing chains alone, its harder than the chains?
Do think them headers with fit in my 08 maxima?
im a girl and i blacked out my altima..how did u black out ur tail lights?? i luv it... :) thxs
Nice man, sounds aggressive but very loud for daily driving your right lol. Nice though. Good Tune will do wonders for the car. You can easily see 260+ to the wheels with those mods and a good tune. I used the UpRev software because I needed a tune after changing cams, but I was able to get nearly 300 whp/wtq out of an all motor stock shortblock VQ35(2006 VQ35/6-speed with Injen cold air, Cattman Headers, Ypipe, Magnaflow catback, NWP spacers and block plate, JWT S2 cams, Supertech valve springs, Osiris UpRev tuned- 296whp/289wtq) best ET 12.92@ 112. Never had this one on slicks, street tires only.
I made 253whp 255wtq on dynopack which is about a 5-6whp less than dynojet so you're right. I have a 4" maf with 570cc injectors, ported IM to put in and hopefully drop the tranny and replace it with a stg3 Action clutch and lightweight flywheel them retune that bitch. Got big plans for her but it's hard especially now that I have a car with financing. But real shit if I ran 12.9 up here nobody could fuck with me 😂😂😂
You can definitely get it there. Mine was more along the lines of the weight of an Altima though, as I did a rear seat delete, removed a lot of sound deadening material, deleted rear trunk area carpet and paneling etc. 3319lbs with about 1/2 tank of gas track ready. Also, smaller wheels made a huge difference for my ETs. Running on some lightweight 15" wheels was worth 3 tenths (.3) over OEM wheels/tires. Cams were the biggest felt improvement though. Jim Wolf knows his shit bro seriously. Fuckin car SCREAMED from 5000-7750 where my ignition cut was set. The up top was insane on highway pulls, and the switch from stock 06 VQ cams to the JWT cams and associated tuning was worth nearly 35HP and 30 ft lbs.
+Joe Doole bro at this shitty cdn us exchange rate I can't afford any major mods from the US. The stg3 clutch and lightweight flywheel is all I need before I retune then I'm done trying to go faster.
Oh I didn't know you were outside the U.S. That sucks having to pay so much for parts. My ACT clutch kit cost less than $430 shipped here. And as far as the tuning goes, yea I do tune my own vehicles now. Also tune a few from our local clubs. Nistune, UpRev and Hondata are where my expertise lies though. It's not hard to do yourself once you have the software; just get a wideband and start familiarizing yourself with what AFRs do during different loads/speeds and RPMs, then start with fuel maps leaving timing alone. See what changes work and what does not yield power, then adjust accordingly and move your way up. A dyno is helpful, but you can still get just as good a tune from street pulls.
+Joe Doole do you have any social media? I think you could be of great help to me. If you got fb lmk and I'll send you a request.
They are OEM I just tinted it with nightshades.
your car sounds sick man! I'm getting an maxima soon and i wanna do the same!
They are The 04 Altima performance headers from Ebay that has no catalytic converters. And no the O2 sensers will need to be extended for it too work. I use old wires from the Saab because it was really long. Try to do it ASAP because the longer you stay without them the more gas you'll be using and the smell will be horrible
I have an o7 . Is it still good ?
i want mine to sound just like this!! i don't care about performance..just the sound. how do i achieve this?
where did you get the altima headers
i got a question for you my friend. my maxima cant turn on the fogs lights and the high beam, can you tell me how do you do that. the wiring diagram please. sorry for my english.
That's how they design the electrical system bro. Having the hi beam and low beam on at the same time would drain the hell outta your battery. I mean for what reason would you need hi and low beam on the same time? More bright? Upgrade the bulb to a 8K HID bulb or add a HID kit to your fogs.
How much is this car worth with the upgrades?
Hey mr jason lyrics...I have the same car 6 speed....so far I only installed the Intake....I wana put some headers....but im afraid how will that affect my gas milage bad? Good? and how can I erase the codes? How many sensors do I need to fix in order not to get chek engine light
where did you get it installed? from ont
Hey man which headers did you use and did they bolt up or did you have to do some fabrication
Ebay headers, they bolt up with a little bit of fabrication.
SWEET!!!!!
I'm in scarborough. That video was actually taken in brampton off of dixie. I have the ebay N1 catback with the magnaflow mufflers and it was the best sound ever. I'm adding all the bolt on's mods to see what she does on the track so that's why I added the headers. It's so loud that I want to reverse it ASAP and accept my loses. Yo if you're down for some drag at cayuga in the next two week hit me up man. A bunch of altima's do it every so often. Link up
You selling your header?
@@terryreyes1125 they've been gone years now.
Where did u get those tail lights?
I want my tail lights just like those ! How ?
Did u delete the egr?
Appreciate the comment. Subscribe and stay tuned, more is coming
where did you get the headers from my headers missing the down stream and the af ratio if short by 6 in but they bolt up fine
+Andrew Bennett Ebay altima headers. 02-06 direct bolt-on
You ever dyno?
I'm getting a black 04 maxima for 2k with 110k on it . I was only gonna get it tinted and paint the rims. Are these cars naturally quiet. My camry sounds like a fucking race car rn so I want a quiet car atm
So from Nov 1st, 2011 to the date you uploaded this vid , what all did you change because there's a whole new level of feedback in the last vid.
+Tyler Byers Resonator and high flow cat.
sounds bad ass
It seems that you're right bro. I don't see the one I bought and the ones I see comes in parts. I guess that's your only option other than the overpriced Racingline Pre-Cats
If your car sounds like this then you're obviously going to have performance. The mods that I had was the Ebay N1 catback, Ebay 02 Altima performance headers, CAI, and Magnaflow mufflers 14816. It will cost quite a bit of money to achieve this so my advice to you is if you don't plan to race your car don't do it. Do the Ebay N1 catback, CAI, nwpengineering BOP and the Magnaflow mufflers.
Yes this is Satin Black can spray.
burning rich??
Nice maxima I got a 2000 maxima
Hellz yeah man. I just gotta get a few weeks at the track and see what's my best time then i'm going back to show mode. The car look aight but when the kit and the 22's are on it's just constant attention. I'll still race with the bodykit just switch out eh rims.
Hey what did you do for your tail lights? are those aftermarket or is that like night shade.
also what's the grill
this is night shades. There's tint vinyl now available.
Who installed your headers on there and do you have to make mods to it or is it a detect fit?
A mechanic not me, it was close fit with little alterations.
wow man sounds like a beast! where did you get the headers and catback from?
Rigo Hdz Ebay.
Were did u get the double tips
Magnaflow 14816 mufflers
Yes I do have burning too rich codes and I think it's because I had a defective MAF sensor that I neglected and by the time I changed it along with the engine the car started burning rich after. I'm really pissed because I really didn't know if I didn't change my MAF sensor I could mess up my O2 sensors. I extended my two lower sensors and I didn't have any problem but now the car uses fuel like freaking crazy. It never ends. I've had it up to here with replacing shit. FML!!!
Yowwww that shit sound nice
One day it'll be able to have performance like the r35 Nissan GTR after all you fit it's engine in your car
where do you get the down stream o2 sensor delete from
+Andrew Bennett All my sensors is there. Both oxygen and a/f ratio.
and i was also wanting to ask aboit your lip? where did you find it. i really like your
My lip was custom made from a 07-08 ebay lip. Lots of work to do. And the headers was also from eBay, 02-06 altima per headers.