ACC Delete using vcds, audi SQ5

Поделиться
HTML-код
  • Опубликовано: 19 окт 2024

Комментарии • 21

  • @robnixon9285
    @robnixon9285 8 месяцев назад +1

    Worked a treat on my 2013 Touareg with same >£2k dilemma - what a find. Thank you sir!

  • @quentinleconte6107
    @quentinleconte6107 9 месяцев назад +6

    Hello, I tried these modifications. For those who are wondering, the cruise control no longer works with this coding... I think it's really impossible to deactivate adaptive control

    • @sten6994
      @sten6994 3 месяца назад +1

      It is possible. Just did it. Remove ACC from all the module features.
      Most important is that you remove ACC module Itself from gateway, so it would not know it has it (module nr 13)
      Works like normal cruise control after. Only error with vcds due to stalk stick being detected as 'wrongly programmed' due to it being acc stick, instead of ordinary one.

    • @issakorean
      @issakorean 2 месяца назад

      @@sten6994sorry im very new to this. Is it possible to remove the front distance sensor in the lower grill? It keeps going off when there leaves or dust and its annoying. If i do this am i able to remove that sensor and have no issues/lights coming on the dash? i want to remove it entirely and the bracket as well. also, i dont care about using cruise control, i never use it

    • @sten6994
      @sten6994 2 месяца назад

      @@issakorean just do the calibration at dealer, shouldnt cause such erratic behaviours. Or just disconnect it and sell module to me, il buy it off u :))

    • @CroneHD
      @CroneHD 20 дней назад

      ​@@sten6994 gjorde du præcist som i videoen?

    • @CroneHD
      @CroneHD 3 дня назад

      ​@@sten6994 hej sten. Can I contact you somehow ?

  • @user..Aa..Bb..
    @user..Aa..Bb.. Год назад

    Great vid. Did it work and will it work on vw golf.

  • @BATworkshop
    @BATworkshop 10 месяцев назад +1

    I bet nearly ever view on this video had the same question as many of the commenters here. It would be very helpful if the poster would check the comments.

  • @Aleksander9003
    @Aleksander9003 2 года назад +1

    After removal does the normal cruise work without changing the stalk?

  • @bimmerworks
    @bimmerworks Год назад

    Great video

  • @kevin-gf5wk
    @kevin-gf5wk 4 месяца назад

    Hello, I have just tried on an Audi RS6 C7. I carried out all the operations but at startup. I have the EPC light on, when I reset the entire coding to the original configuration, the light no longer lights up. Do you have a solution?

  • @danielesicilia754
    @danielesicilia754 2 года назад +1

    Hello m8... I have the same problem on my Q5 would you be able to just revert it to normal cruise with out the radar?

  • @woody314636
    @woody314636 2 года назад +1

    So, does normal cruise work now?

  • @josefbjorling6414
    @josefbjorling6414 Год назад

    I wondering, Is it a normal manual Cruise control after this operation?

  • @davecoles9398
    @davecoles9398 Год назад

    Hey mate, Which VCDSS system do you use ?

  • @Dovie170986
    @Dovie170986 3 года назад +1

    Tried this on a3 sline didnt work also when removing the engine module 1 my glow plug light flashes constant 😔

  • @mikeerin5031
    @mikeerin5031 Год назад

    Did anyone ever get an answer if the standard cruise still worked?

  • @nathannell3543
    @nathannell3543 2 года назад

    After deleting the ACC, did the normal cruise control work?

    • @josefbjorling6414
      @josefbjorling6414 Год назад

      I wondering the same.
      Is it a normal manual Cruise control after this operation?

  • @andyguest6543
    @andyguest6543 3 года назад +4

    The owner needs to be careful with this and advise his insurer that it's been removed. If he rear ends someone and the front assist system has been disabled they could refuse to pay out for his vehicle damage.