One of the worst ideas in decades; at least since the ATV, and once you have to make an evasive left or right turn and burying your head and shoulder into asphalt, you'll soon learn why this is a bad idea... there should be a new book, titled, 'Upright Trikes Not Safe At Any Speed'. There's the other part of the spoked wheel collapsing in a tight turn as well. As much as I like the bike, I'd make some changes; lower your center of gravity, reduce the wheel size, or try to build a tilting/leaning wheel turning system.
Greeting from Indonesia...... I saw this as absolutely wesome creativity. Pleased to see a mini trike using bmx frame combined with 100 - 125 cc motorcycle engine. Cheeeeerrrr
Couple of suggestions, you should switch the rear axle for a bigger one and but two pit bike wheels on the back. And for all of your frame supports you welded off of, make sure all the bolts are tight and weld them to your plate and then braze the aluminum to the steel. For a more permanent finish. Awesome build though, I would love to see a Chinese dune buggy build!
Great dirt bike powered granny trike. Even if this does not go that fast, that is something I want. Even putting a snowmobile engine on a granny trike is a great one to do, lad. You are famous with these great creations other manufacturing companies do not give a care.
Hey man love the videos. I’d like to see you build something with parts you find at a junk yard only and without a welder. I almost never buy things online and I don’t have a welder, yet I’ve managed to build different motorized bikes and even a lawn mower go kart. I’d like to see what you can build as well! You’re videos give me great ideas for my channel sometimes
Awesome build. I have used those similar Lifan motors and other clone types like that on my projects. If you have older or original hardware though or want a fab project I would recommend replacing at least the gear change and maybe the kick start too.
(Take with a grain of salt I'm no expert) but I would double check to make sure sure idle and fuel mixture screws are okay on the carb. Otherwise it could be valve gap but I typically don't open up that can of worms unless I really have to on those types of motors because it always feels like you pull at the thread and the sweater comes undone lol. It's just the nature of the beast I suppose. Better just to get it running fine and walk away
A good project would be a dirtbike powered pocket rocket or I don't know if you get snow but A 670 Predator V-Twin engine on a snowmobile or a 1200cc V-twin engine on a snowmobile or little buggy. Great Vid! Cant wait for the next one!
My wife and I go to car shows in Pigeon Forge Tennessee. I have a bad hip and walking alot is hard for me to do...well I've been thinking of this same build!
i lowered mine and put more of a rake on the front so it's not so flip happy. I'm sure it feels whippy with that steep of an angle on the forks. im not talking go chopper with the front end kicked way out there. just about 10-15% more rake. thanks for the video.
BEFORE YOU CONTINUE AT A HIGH SPEED-YOU WANT TO ASK A TIRE MAKER OF WHAT SPEED CAN YOU GO ON THOSE TIRES BEFORE THEY FALL APART SINCE THEY WERE ONLY MADE TO TRAVEL O-TO 10 MPH ON A SIMPLE BIKE-YOU SHOULD INVEST IN RACING TIRES FOR BYCLES
Scary is a great word to describe a motorized trike . Back in the mid 70s my friend and I built a trike with a Kawasaki 90cc enduro engine . The frame bolted together in the middle , so you could put it in a trunk for transport . We used 13" car wheels / tires on the back and an 8" boat trailer wheel / tire on front . Not sure what it weighed , but not much . Solid axle and you could actually smoke the tires . Low speeds were fun except corners , but high speed runs made you think you were going to meet your maker . I have had an idea floating around in my head for years , an off-road four wheeled power bike . Primarily a pedal powered unit with both electric assist and a tiny honda engine from hand held power equipment . The build in my head gets pretty complex , tying the three power sources together along with full floating suspension . Was planning on mountain bike wheels and tires and keeping the center of gravity as low as possible . You are just the guy to make it .
Amazing Job done, you have skills make your Project WELL DONE. I want do something more simple I'm New in this Thanks for Show Us Your Project to Learn and Open Mind Blessings Thanks a Lot. From California.
You’re very talented my friend did a good job I like doing work like that but I’m not as good as you so I enjoyed it very much God bless you have a blessed day amen.
The tyres will self destruct in no time! Looks like fun but it's way over powered with that Lifan (Honda copy) engine. 50cc 2-strole would have been a better choice. Good project all the same, thanks for showing us!
A trip to the junk yard, find some stuff, make it work. You do really cool stuff, keep at it. Oh just an after thought. I've always wanted to try and make a steam powered generator. Maybe convert an old single cylinder engine. Idk could be cool.
build your own little bike frame with steel and mount a 50cc or some small engine to it. make the width as small as possible and you'll have a portable little motor bike that you can take anywhere
You wanted ideas, well here's one, Get a fat wheel mountain bike and motorize it!! Electric should be the easiest way to have some power and be able to mount the motor.. And a tip for this build, I would go with fat tires, they will make it more stable and give more contact to the road so you can safely go faster..
Good build only just found your channel👌👌 how about for your next build, a FatBoy PitTrike. It’s a kids atv/quad back end, pitbike frame and engine and a fatboy pitbike front end. They look bad as.
Be sure to check out the first part! ruclips.net/video/7-gtphJppoE/видео.html
Build suggestion? 1970's two stroke moped engine powered "Green Machine"? 😁 (If you install a damper, steering is a lot more stable)
One of the worst ideas in decades; at least since the ATV, and once you have to make an evasive left or right turn and burying your head and shoulder into asphalt, you'll soon learn why this is a bad idea... there should be a new book, titled, 'Upright Trikes Not Safe At Any Speed'. There's the other part of the spoked wheel collapsing in a tight turn as well. As much as I like the bike, I'd make some changes; lower your center of gravity, reduce the wheel size, or try to build a tilting/leaning wheel turning system.
Is it still for sale ill pay for shipping
oliver is it for sale if so how much i like it
Greeting from Indonesia......
I saw this as absolutely wesome creativity. Pleased to see a mini trike using bmx frame combined with 100 - 125 cc motorcycle engine.
Cheeeeerrrr
Way cool 😎 Oliver, my grandma would have loved it 💞,awesome build always 😀!! Thanks for sharing and as always you know "Howdy from Texas "!!
Thanks again!
That thing is cool
Awesome workmanship
Couple of suggestions, you should switch the rear axle for a bigger one and but two pit bike wheels on the back. And for all of your frame supports you welded off of, make sure all the bolts are tight and weld them to your plate and then braze the aluminum to the steel. For a more permanent finish. Awesome build though, I would love to see a Chinese dune buggy build!
I’d like to see a drift trike or a dune buggy would be really cool and something with IRS!! Great vids!!
Sounds like something great to flip over
Them tires ain’t gonna last long 😂😂😂😂
Was gonna say the same thing. Cool build but they could easily pop or tear at speed and send you flying don't ask me how I know...
@@JustPeachyification I know how you know.
I said it last vid and I'll say it again. MTB tires and offroading awesomeness!
He could put mountain bike tires on it
Blowing a tire would suck, but imagine those wheels blowing apart. They make billet aluminum wheels just for such applications.
Sweet! You flipped the top tube thing around. Thanks for taking my suggestion into consideration. Great vid as always!
sure did! thanks for your input mate
Highlight of my day is when your upload! Please Motorize a bmx bike next.
That is really a cool machine! Whoever buys it is going to have a lot of fun with it
Great dirt bike powered granny trike. Even if this does not go that fast, that is something I want. Even putting a snowmobile engine on a granny trike is a great one to do, lad. You are famous with these great creations other manufacturing companies do not give a care.
This channel is gonna blow up, Im telling you. This is great stuff
Just wanted to mention , it was a good build fabricating it 👌👌👌🤓
Hey man love the videos. I’d like to see you build something with parts you find at a junk yard only and without a welder. I almost never buy things online and I don’t have a welder, yet I’ve managed to build different motorized bikes and even a lawn mower go kart. I’d like to see what you can build as well! You’re videos give me great ideas for my channel sometimes
I like the idea! we'll see :D
That's awesome! I have always wanted to see a granny bike motorized. How am I just now finding this channel? Looks like lots of killer projects
You are a very impressive fabricator, my friend! Good Job!
Awesome build. I have used those similar Lifan motors and other clone types like that on my projects. If you have older or original hardware though or want a fab project I would recommend replacing at least the gear change and maybe the kick start too.
thanks, yeah so far the motor runs great, only issue I have is it tends to back-fire when starting and it pushes up my leg through the kickstarter
(Take with a grain of salt I'm no expert) but I would double check to make sure sure idle and fuel mixture screws are okay on the carb. Otherwise it could be valve gap but I typically don't open up that can of worms unless I really have to on those types of motors because it always feels like you pull at the thread and the sweater comes undone lol. It's just the nature of the beast I suppose. Better just to get it running fine and walk away
A good project would be a dirtbike powered pocket rocket or I don't know if you get snow but A 670 Predator V-Twin engine on a snowmobile or a 1200cc V-twin engine on a snowmobile or little buggy. Great Vid! Cant wait for the next one!
That trike is awesome , great build and amazing video .
Wow 42MPH is fast for that thing!
Thanks for posting 👍
What’s the next project on your list?
stay tuned :D thanks mike
Looks real clean , nicely done
Thank you!
My wife and I go to car shows in Pigeon Forge Tennessee. I have a bad hip and walking alot is hard for me to do...well I've been thinking of this same build!
That gas tank looks absolutely dope! I love it.
Thanks!
Motorized washing machine, that would be awesome.
haha i don't know bout that.
I have a couple motorized trikes. if you chop and rake the front. they handle a lot better. not so tippy. cool project
i lowered mine and put more of a rake on the front so it's not so flip happy. I'm sure it feels whippy with that steep of an angle on the forks. im not talking go chopper with the front end kicked way out there. just about 10-15% more rake. thanks for the video.
BEFORE YOU CONTINUE AT A HIGH SPEED-YOU WANT TO ASK A TIRE MAKER OF WHAT SPEED CAN YOU GO ON THOSE TIRES BEFORE THEY FALL APART SINCE THEY WERE ONLY MADE TO TRAVEL O-TO 10 MPH ON A SIMPLE BIKE-YOU SHOULD INVEST IN RACING TIRES FOR BYCLES
That is a cool build!
Nice problem solving. I would like to have seen the diff welded. It would have given the build more even power.
Keep up the creativity.
Scary is a great word to describe a motorized trike . Back in the mid 70s my friend and I built a trike with a Kawasaki 90cc enduro engine . The frame bolted together in the middle , so you could put it in a trunk for transport . We used 13" car wheels / tires on the back and an 8" boat trailer wheel / tire on front . Not sure what it weighed , but not much . Solid axle and you could actually smoke the tires . Low speeds were fun except corners , but high speed runs made you think you were going to meet your maker . I have had an idea floating around in my head for years , an off-road four wheeled power bike . Primarily a pedal powered unit with both electric assist and a tiny honda engine from hand held power equipment . The build in my head gets pretty complex , tying the three power sources together along with full floating suspension . Was planning on mountain bike wheels and tires and keeping the center of gravity as low as possible . You are just the guy to make it .
that would be cool, like a utility vehicle with a gas generator on it?
It must be nice having a full machine shop at your disposal. You average Joe doesn't have that stuff.
$500 is barely the cost of the bike and motor! Great price and cool project👍🏿👍🏿
Fine job! Highly commendable
Amazing Job done, you have skills make your Project WELL DONE. I want do something more simple I'm New in this Thanks for Show Us Your Project to Learn and Open Mind Blessings Thanks a Lot. From California.
So awesome cool I'm doing my 3 weather next month
me and some friends built a whole frame on a bike like this with doors and windows. Almost like a driving house.
Way Cool Bud !!👍👍
Very cool build bro nice work
You’re very talented my friend did a good job I like doing work like that but I’m not as good as you so I enjoyed it very much God bless you have a blessed day amen.
Good job with the brake.
The part you picked up from the scrap yard was one half of a Cush-Drive that has a 3rd part between made of a Rubber compound.
granny would love it.
Scary fun the best!!🤣
Wow, awesome congratulations
You should fabricate a straight shaft for the rear tires so both of them are spinning
haha yeah I'd do that if I was doing more offroad stuff
Mikey likey very much, if you were over here in the uk 🇬🇧, I would happily buy it lol 😂. Awesome build man.
Man im loving your videos
my grandma wants this
I just might watch em all♥️
Another awesome build this is sweet
Thanks again!
Great stuff!
Its awesome dude,nice project
I'm glad you like it
Thats sick af! Ima have to make a similar build with a trike 🤘🏻
You are talented
I'd like some kind of pusher type trailer build that could be used for any bicycle..
Watch out for the wheels exploding 😂
lol I'm not to hard on her
500$? Sold!
Haha really?
One Wheel Peel!
The tyres will self destruct in no time! Looks like fun but it's way over powered with that Lifan (Honda copy) engine. 50cc 2-strole would have been a better choice. Good project all the same, thanks for showing us!
Good job 👏
Build a Philippines tricycle. That would be Incredible!
Yes pal cool build
I dig it man. But best part of both videos was the end. “ if ya ever up in CA I’ll sell it for $500 “.
keep up the goodwork
cheers, thanks.
Very nice bro
Actually nice job 👍
I think you should build a racing garden tractor. That's going to be cool
Build a adult size doddle bug style mini bike (big enough to put like a 440 motor on). And great build.
Just take a go kart rear axel and put it on on a pit bike. I did it and it works very good and is SUPER FUN. PLEASE MAKE ONE
A trip to the junk yard, find some stuff, make it work. You do really cool stuff, keep at it.
Oh just an after thought. I've always wanted to try and make a steam powered generator. Maybe convert an old single cylinder engine. Idk could be cool.
I know nothing of steam powered engines but could be a fun project!
What you should build next is a respect for the elderly!
Shhhh the tear section is outside
Need a Differential or a straight shaft for good traction!!! Lets build that next!!!
Imma tell you a big proyect, a bike (or trike) with a car engine (could be an old 4 banger)
It'd be cool, but it'd probably break the bike in half.
@@NinetySix_95 doubt it, those old 4 bangers barely reached 100 hp, some bike engines nowadays do way more than that.
@@ganceann4457 Oh, like a dirt bike, not a peddle bike. Gotcha.
build your own little bike frame with steel and mount a 50cc or some small engine to it. make the width as small as possible and you'll have a portable little motor bike that you can take anywhere
Its called a pocket bike and they already exist for 200$
Yeah but they’re like stupidly small. I’m saying to build a frame that fits him and just add an engine like maybe 70cc bc that’s pretty small
You wanted ideas, well here's one, Get a fat wheel mountain bike and motorize it!! Electric should be the easiest way to have some power and be able to mount the motor..
And a tip for this build, I would go with fat tires, they will make it more stable and give more contact to the road so you can safely go faster..
sweet! just needs some fat ol tready mountain bike tires to help it hook up
yes!
It seems very funny jajaja greetings, always having new amazing ideas.
Awsum build man! Love the ally to steel aspect. How about a powerwheels build! 🔥👍
thanks mate, ha we'll see!
I agree with the majority id like to see pretty much anything with IRS.
you can use the pedals if are out of fuel?
Your best Butcher out there 😂😁😁😂
You should put dirt bike tires on it, i think it would look cool
*Muy divertido y excelentes materiales*
Love it.
Yo,get that thing a proper fuel tank!
What kind? Lol
@@OliverMotorized i didn't think we'd get this far
Ive always wanted to build a vintage pedal car with a 50cc 2 stroke tucked inside... no suspension, keep the tires under the body... "sleeper"
Good build only just found your channel👌👌 how about for your next build, a FatBoy PitTrike. It’s a kids atv/quad back end, pitbike frame and engine and a fatboy pitbike front end. They look bad as.
Very Good!..
thats dope wish I can do mine like that looks lkike a lot of work tho don't have all that tools
Build a motorized unicycle next.
A locking diff
yeah it needs 2wd
Sweet, now just a set of fatter, lower profile slicks and you'll get it to launch like a dragster.
Great video. Now use alternator make it one electric
This will have over a million views in a week.
Souped up peewee Herman bike!👍
I think you just need to send it and make a shifter kart man.
Awesome lol 👍
Fantastic