I have this exact same system. I took my upgrade a bit further. 32 GB memory, 4790 CPU, delete DVD and HDD. This BIOS does not support NVMe boot device natively but I installed a PCI-e NVMe adapter and a 1TB NVMe drive. I was able to add NVMe boot support via the method presented in several more recent YT videos. The key was the Service Mode jumper near the white PCI-e slot. The jumper enables writing to the BIOS and when finished removing the jumper again makes the BIOS read only. Making this mod also enables booting in UEFI mode for the NVMe eventhough the BIOS is not fully NVMe. For a basic office PC it is pretty fast on Windows 10 Pro. It won't need to go in the landfill for quite some time.
I bought mine used at Fry's electronics a good 10 years ago for maybe $130. Thought of replacing the disc drive at the time as it had 60,000 hours but I've just let it run and the things run without problem until now for another 10 years. Just have to replace the CD drive Pretty amazing and well-built unit
I just transferred my HP Elitedesk 800 G1 to an old HP Pavilion case, added a gtx 1650 and I'm playing Forespoken right now. Extra things I had to do: 1.) Remove the power switch and lights from the front cover button, insert into the from cover of the Pavilion. 2.) To use my Elite desk cooling fan, I had to find some nuts that fit on the bolts in the fan too attach it to the mother board. The Elit desk mother does not have built in nuts. The fan bolts into the case. It ain't pretty but works like a champ.
Was the power supply compatible with this motherboard? I know HP is using this type of connections more often but not sure if I have seen those in a Pavilion case. The GTX 1650 is a good choice to upgrade an older PC to something capable of playing recent games (about to release a video with the same in a few days :))
@@jensdbe No, it requires an adapter cable. I'd share the link if I knew how, but you can find it, look up cobuman youtube channel. He has a link to Amazon in his description. It works for G1 for sure, but I think it works for G2 and G3 as well. It was about $14
this is amazing, thank you for making this -- i needed to learn how to disassemble this so I can repaint the case (turning this into a hand-me-down for my 8yo daughter, who loves pink)
Have a similar machine here for which I plan to do something similar but with a GTX 1650. Need to find some time to record all of this and edit the video though. Still going strong these machines, despite their age.
thanks, I'm currently working on upgrading a similar one (though more recent, it's the 800 G2 SFF, with a 6th gen i5 and DDR4 RAM). Too bad you didn't add a GPU though, that's challenging since the back panel has some annoying metal bars that I'm gonna need to remove if I want to fit my low profile GPU.
I didn't think it would be near as powerful, at least until I saw usb3)! Also, I hear you can put an nvme drive into Pci-E with an adaptor and make it bootable with a bootloader that has nvme drivers.
NVME with a PCIe card would indeed be a large increase in disk performance. Not sure if the BIOS is able to boot from it. I guess it also depends on the PCIe card you use.
Thank you for the video. HP's layout sure makes it easy to work on that PC. I'll definitively consider this model myself. 👍 BTW: what did you end up using to mount the SSD?
does this bios version that I have is L01 V02.78, does it have the ability to have TPM 2.0? and how about secure boot? Amazing how you tore down this desktop. Thanks
every vid on this G1 upgrade, the host forgets to DC the speaker/MB connector......at first NOTE, if you case swap, a 2 slot GPU will cover front panel USB 3.0 port, 2+ and sata gets tight too.
Making 5 beeps and does not boot. Been researching and it made me think the motherboard might have a problem. Do you agree? BTW, this was most helpful video I came to in terms of working on pc as a novice. Thank you so much for your kind work!!!
The SSD is a 120GB 840 EVO Samsung The RAM is Kingston HyperX DDR3, not sure about the exact type. I noticed that these line of HPs are not very picky with memory.
hey man i have the same computer as you but i have a problem with my cpu fan staying on every time i push the button to turn it on the fan starts spinning then immediately turns of and keeps doing it till you unplug it any suggestions please.❤
If no beep codes appear, I would suspect an issue with either CPU or Motherboard. Easiest way to test if you could swap either of those with a know working one.
Learned some new stuff thanks my guy !! well if u can get me know with what is the difference in 2 ram challens and 2 ram slots i know like 4 slots in 2 challens but why not in 1 challen only or on 4 seperate challens ?
Typically desktop CPUs have two channels supported in the CPU architecture. It can be a lot higher for server CPUs (like Xeon). The best is to have at least one DIMM in each channel of the same type (speed, size,...). The amount of slots is normally a budget choice. Cheaper motherboards would have 2 slots (one per channel) and more expensive/luxury boards have 4 (2 per channel). As far as I know this is just a budget choice.
@@jensdbe Thank you sir !! another thing I just have the hp elitedesk 800 G1 SFF and as per the hp website there are some low graphics cards listed for this pc( around only 4 models ) like of 1, 2gb but can I connect a higher end graphics card upto 4gb in my pc ?? As I want to game for eSports on it. It would mean a lot if you help your fellow subscriber 😀
@@shivrajdangi3926 the problem is that the power supply is not that powerful and you are limited to low profile cards. A 1050ti should be a good match. You can easily find these with 4GB and in low profile.
Dear write which processor should I buy hp prodesk 600 g1 twr motherboard 18e7 processor 4130 I want to install Intel Core i7-4770 or Intel E3-1240 V3 sorry google transmitter
Seem to be the PSU custom as well, so is it possible to use normal size psu in case has psu problem, the psu connector also look different than normal psu?
There are adapter cables that would allow you to connect a standard ATX power supply to the motherboard but it most likely won't physically fit in the enclosure.
I have the same PC. I am facing one problem! Doesn't organize long cable USB 10 meters or even 5 meters. I heard because there is not enough power to read them in long USB cable. But I have weak laptop and still reads them like a charm but this HP elitedesk doesn't 😔
Greetings, I have a question. When I added an Nvidia Quadro video card, it does not show me the boot options. When I want to enter the BIOS or flash disk, the Windows screen appears directly to me. Is it possible to help? Thank you.
Could it be that the primary display is set different in the BIOS? If I remember correct, you can choose between auto, on-board or PCIe. You would need that last option in order to display the BIOS on the PCIe card.
hello , i have a same model but when i start my pc i cannot get any screen. windows 11 already installed. i dont know what is the reason. can you help me ?
Not having anything on the screen can have a lot of causes. Assuming that the monitor still works, Is there still power? Lights on/fans spinning? If there is, try with only one DIMM or a know good one. If that didn't help, there is probably something wrong with your motherboard or CPU.
Question, I have that same HP 800G1, I am going to install a Geforce GTX1650, I know the power comes from the PCI-E rail thru this 240 watt power supply. Nividia recommends at least 300 watt power supply. Will the GPU still work and will it work properly? If I upgrade the PSU, the watt at the rail would not increase anyway right?
a GTX1650 is rated at 75W maximum, so the recommendation of 300W includes all other components. If you have just that card and maybe an SSD as devices that draw power (plus your motherboard, CPU and memory), you should be fine with the 240W power supply. The PCIe slot can provide maximum 75W so that will not chance by upgrading the PSU but if your total consumption would be over that 240W (due to additional cards and drives for example), a more powerful PSU could help there.
i have the 800 G2 sff with 200w psu, the rear 4x 3.0 USB are acting up, i use one for an external HDD with its own ps and a usb wifi dongle and it wont connect or connects but has hard time with little speed its an RTL8811AU and it works fine on the front ports 2.0 or 3.0 but the rear 3.0 it has issues why? i checked the bios settings and all seems okay set to default settings. anyone else have similar issues ?
hello is it possible to upgrade one of these to an aftermarket motherboard? as long as it is the right size do you think the pins will all be compatible? i know these have a proprietary connector for the power supply but not sure about the others
It would be really hard. Better to get another (cheap) case and power supply. The board is completely custom, so mounting holes, back panel layout, power supply,...
There is no M.2 slot for an SSD on the motherboard so you would need a PCIe card for that. The GT640 should work just fine as long as it is a low profile card.
Hi how much is your ram frequency is it 2 1600mhz of ram because on the bios setting of elitedesk 800 g1 sff there's no overclocking option(im not sure if there is overclocking) but does it automatically detect your 2 1600 mhz of ram or it will stick to it's default ram speed (example: my old ram speed is 1333mhz but cpu z numbers says it's 2 665mhz so it sums up) thanks for your answer friend.
It is 1600Mhz and that's the maximum supported by the board/CPU in this machine. As far as I know there is no way to force it, it's just what is detected. Out of experience I know that is not always going properly. CPU-z does tell the real speed, which is half with DDR
The DVD drive is a slim model. It's about the same height of a SATA SSD. The SATA data cable would also fit but not power. For that you could use a splitter from the other power connector.
Good Morning I have a machine of the same model. Please I would like a tip I want to run games on it and for that I need a video card. In this case which one would be compatible with this machine model. thanks for your video. BRASIL
AMD RX560 or NVIDIA 1050Ti should still work and are more or less ok with the rest of the hardware. The limit is the power supply and the fact that the card has to be mainly slot powered.
The board is pretty custom for this case. A standard power supply or standard board would also not fit in here. The board can't be powered by a normal power supply either (or you'd need conversion cables).
Hi yes. Does this computer support 1333mhz ram? Although the cpus supported for the computer all support the ram but I've never seen anyone try it before
@@jensdbe tysm for replying! I recently bought a RAM for my computer but the RAM doesn't fit so I've been researching. Hopefully it fit this time.. Thanks again!!
@@Немања-ф3ф you could buy a gtx 1050 low profile ist is really cheap if you can find one for around 50-80 USD or Euro it would be much better then the hd graphics :) or of you can afford it a 1050 ti would be perfect or a 1650 super of course both in low profile
OMG the hard drive bays on these are absoltue aweful. I don't know how you can scr33w up a 5.25 and a 3" drive bay but HP found a way. You can forget the traditional mounting via 4 side or bottom screws.There is no way to mount either drive in here without them flopping around. I finally just shoved a drive in there floating around and used foam to keep it from rattling. And opening the case was infuriating as well. Instead of two screws on the back, there is a handle you have to pull up and yank on the top cover of the case. WTF. seriously. WTF HP. PC techs do not appreciate change. Or non proprietary connectors. I would say, avoid these machines, even if theyseem like great buys. You can't put a ful height GPU in them, and the power supply is propreitary and only 250 watt. They are not as awful as Dells or Macs, but they are not much better either.
You do need to special mounting screws indeed, which can be a pain as they are not so easy to find. Without them it indeed feels pretty clumsy. Agree on using proprietary connectors. Moving the motherboard or PSU to another case is near impossible so you can only use HP-specific replacement parts. About the GPU, I guess this is simply not targetted at users that want a decent GPU. The tower version would be a better match in that case.
@@Irishkiwi No, that requires both an 8-pin and 6-pin power connector and the PCs power supply has no GPU cables, so only lower power (75 watts or less) cards can work
![Lethal Company Music Video 🎵 "Follow The Orders" [VERSION A]](http://i.ytimg.com/vi/QeooZB4Z7RA/mqdefault.jpg)
Picked one up for $40 usd with 2 monitors and a gaming mouse. I don't think I'll ever find another deal this good in my lifetime.
Sounds like a very good deal indeed. Sometimes you just need to be a bit lucky
i just want to say, this guy tore down this PC absolutely amazingly.
This is literally the video that I've been looking for, thanks a lot
I have this exact same system. I took my upgrade a bit further. 32 GB memory, 4790 CPU, delete DVD and HDD. This BIOS does not support NVMe boot device natively but I installed a PCI-e NVMe adapter and a 1TB NVMe drive. I was able to add NVMe boot support via the method presented in several more recent YT videos. The key was the Service Mode jumper near the white PCI-e slot. The jumper enables writing to the BIOS and when finished removing the jumper again makes the BIOS read only. Making this mod also enables booting in UEFI mode for the NVMe eventhough the BIOS is not fully NVMe. For a basic office PC it is pretty fast on Windows 10 Pro. It won't need to go in the landfill for quite some time.
That's interesting information, might give this a try. Thanks!
Thank you I really needed this. I'm planning to buy a computer of this type and I wanted to add a new HDD to it and now I know it will go in.
great video ! .. Those HP's are very good value for money too if you want a general purpose PC
I bought mine used at Fry's electronics a good 10 years ago for maybe $130. Thought of replacing the disc drive at the time as it had 60,000 hours but I've just let it run and the things run without problem until now for another 10 years. Just have to replace the CD drive
Pretty amazing and well-built unit
Literally the PC I have right now and upgraded for gaming
Does it connect to the WiFi wirelessly?
no
@@PeakHumanAdvice
Thanks for the video. Very good pc’s for emulating video games. I want to add a little more memory to mine though it goes quick.
I just transferred my HP Elitedesk 800 G1 to an old HP Pavilion case, added a gtx 1650 and I'm playing Forespoken right now. Extra things I had to do: 1.) Remove the power switch and lights from the front cover button, insert into the from cover of the Pavilion. 2.) To use my Elite desk cooling fan, I had to find some nuts that fit on the bolts in the fan too attach it to the mother board. The Elit desk mother does not have built in nuts. The fan bolts into the case. It ain't pretty but works like a champ.
Was the power supply compatible with this motherboard? I know HP is using this type of connections more often but not sure if I have seen those in a Pavilion case. The GTX 1650 is a good choice to upgrade an older PC to something capable of playing recent games (about to release a video with the same in a few days :))
@@jensdbe No, it requires an adapter cable. I'd share the link if I knew how, but you can find it, look up cobuman youtube channel. He has a link to Amazon in his description. It works for G1 for sure, but I think it works for G2 and G3 as well. It was about $14
Good job you doing there 👍🏻
Great video dude thank you
Thank you, very helpful. I bought two HP Elite Desk 800 G1 SFF, for my household.
Thanks for the nice feedback, good choice :)
this is amazing, thank you for making this -- i needed to learn how to disassemble this so I can repaint the case (turning this into a hand-me-down for my 8yo daughter, who loves pink)
Pretty good video. The only thing I would add is changing the CR2032 CMOS battery while you have the motherboard out.
Excellent work.
Awesome man! Thank you 😁
Thanks.
This video helped me a lot.
I have the same one I put a 4790k in it 16g of ram a500watt power supply and a 1050ti and put the motherboard into a bigger case and it works great
Have a similar machine here for which I plan to do something similar but with a GTX 1650. Need to find some time to record all of this and edit the video though. Still going strong these machines, despite their age.
I am so confined as Google says that it doesn’t have a pcie slot but in this video it has one.
Superb
thanks, I'm currently working on upgrading a similar one (though more recent, it's the 800 G2 SFF, with a 6th gen i5 and DDR4 RAM). Too bad you didn't add a GPU though, that's challenging since the back panel has some annoying metal bars that I'm gonna need to remove if I want to fit my low profile GPU.
See my similar video of the G3, where I have a 1050Ti installed :)
@@jensdbe link?
Thank you. This video helps me.
Great Job!
great review and teardown. i have the same unit but no ssd. where can I get the mounting screws for the ssd under the hard drive?
Salut je voulais savoir si il y avait moyen de mettre un boîtier gamer le MC-X7 merci pour ta vidéo
Great Video, Thanks for sharing! I have the same model, can I install a WIFI adaptor in this PC, or have to choose a USB wifi?
Sure. Any low profile PCIe wifi adapter should work. USB as well.
I didn't think it would be near as powerful, at least until I saw usb3)! Also, I hear you can put an nvme drive into Pci-E with an adaptor and make it bootable with a bootloader that has nvme drivers.
NVME with a PCIe card would indeed be a large increase in disk performance. Not sure if the BIOS is able to boot from it. I guess it also depends on the PCIe card you use.
Injecting the bootloader into h-p factory BIOS would be an learning project, with someone who's done it before.
very good
below the 3.5 driver support has a 2.5 support. I could take the screws left over from one of the 3.5 drivers and fix it on this bracket
The srews I had left camenfrom a 3,5" drive and had a different thread (wider) than what the SSD had, so couldn't use them.
Use the black screws with blue rubber..black is 2.5mm, those silver SAE 6-32
@@bryanminugh9680 Where do you get black with rubber? All I have even seen are the blue with rubber! Hmmmmm....
@@peakslayer1 same black-dip metric screw has been in all HP/Compaq for years. Thousands left over from every seller that tears apart old PCs
wondering if there is room to add a second hard driver under the first, under the casing.
How did you manage to mount the SSD finally?
I just used a standard 2,5" to 3,5" bracket to fix the SSD.
you have to enable uefi boot not legacy to get your usb drive to boot into installing windows
Why don't you install the sdd 2.5i in the correct slot under the hdd drive?
Thank you for the video. Can I use PC3 DDR3 1600Mhz 8G Ram one pcs?
Thank you. This is the video I was looking for. Can you please suggest the max RAM and what Graphics Card can we have for this?
Thanks to you sir, like (y)
Good video but for anyone watching you can do all these upgrades without taking it completely apart
Thank you for the video. HP's layout sure makes it easy to work on that PC. I'll definitively consider this model myself. 👍
BTW: what did you end up using to mount the SSD?
I moved the SSD to a 2,5" to 3,5" bracket and fixed it using the additional screws I had.
@@jensdbe 3M "Dual Lock" tape is very handy for mounting things like SSDs. Very secure.
@@jensdbe hi would another mother board fit in here -to the old mounting screw holes, eg a new ryzen mobo
I have EliteDesk 800 G1 what should be the max CPU i could replace to it ? I plan to edit video using premiere pro. any recommendation please?
does this bios version that I have is L01 V02.78, does it have the ability to have TPM 2.0? and how about secure boot? Amazing how you tore down this desktop. Thanks
every vid on this G1 upgrade, the host forgets to DC the speaker/MB connector......at first
NOTE, if you case swap, a 2 slot GPU will cover front panel USB 3.0 port, 2+ and sata gets tight too.
Making 5 beeps and does not boot. Been researching and it made me think the motherboard might have a problem. Do you agree? BTW, this was most helpful video I came to in terms of working on pc as a novice. Thank you so much for your kind work!!!
5 beeps points to an issue with the memory. If you have multiple DIMMs in there, try to boot with only one or move it to a different slot.
It worked. Thank you so much!!!
Hi, what are the ram and SSD references? Any link? Thank you.
The SSD is a 120GB 840 EVO Samsung
The RAM is Kingston HyperX DDR3, not sure about the exact type. I noticed that these line of HPs are not very picky with memory.
Need to find a cpu cooler for this. Any suggestion!! Is there a generic specification that I can use. Thanks
If I wanted to change the processor to an i7, could it be done?
This shouldn't be a problem. THe i7 4770 or 4790 seems to be a popular option
I just swapped mine to i7-4790k,which i bought seconhand,new ones might be hard to get,if not impossible.Original was same as in this video.
How's the airflow?
hey man i have the same computer as you but i have a problem with my cpu fan staying on every time i push the button to turn it on the fan starts spinning then immediately turns of and keeps doing it till you unplug it any suggestions please.❤
If no beep codes appear, I would suspect an issue with either CPU or Motherboard. Easiest way to test if you could swap either of those with a know working one.
What kind of graphics card can we use?
What size of dvd rom? Because i want to change to ssd caddy.. Thx
DO YOU HAVE A VIDEO TO CONNECT THE 22-IN-1 MEDIA CARD TO THE ELITEDESK 800 G1?
I want to know if hp compaq pro 6200 sff can use i7 4790 cpu.
Learned some new stuff thanks my guy !! well if u can get me know with what is the difference in 2 ram challens and 2 ram slots i know like 4 slots in 2 challens but why not in 1 challen only or on 4 seperate challens ?
Typically desktop CPUs have two channels supported in the CPU architecture. It can be a lot higher for server CPUs (like Xeon). The best is to have at least one DIMM in each channel of the same type (speed, size,...). The amount of slots is normally a budget choice. Cheaper motherboards would have 2 slots (one per channel) and more expensive/luxury boards have 4 (2 per channel). As far as I know this is just a budget choice.
@@jensdbe Thank you sir !! another thing I just have the hp elitedesk 800 G1 SFF and as per the hp website there are some low graphics cards listed for this pc( around only 4 models ) like of 1, 2gb but can I connect a higher end graphics card upto 4gb in my pc ?? As I want to game for eSports on it. It would mean a lot if you help your fellow subscriber 😀
@@shivrajdangi3926 the problem is that the power supply is not that powerful and you are limited to low profile cards. A 1050ti should be a good match. You can easily find these with 4GB and in low profile.
@@jensdbe power supplies are not much costly by just upgrading it I can plug a good graphics card that you mean 🧐
Any rtx card ?? As rtx offers high fps and is good for gaming
what type of power supply is that one ?
Dear write which processor should I buy hp prodesk 600 g1 twr motherboard 18e7 processor 4130 I want to install Intel Core i7-4770 or Intel E3-1240 V3
sorry google transmitter
Seem to be the PSU custom as well, so is it possible to use normal size psu in case has psu problem, the psu connector also look different than normal psu?
There are adapter cables that would allow you to connect a standard ATX power supply to the motherboard but it most likely won't physically fit in the enclosure.
I have the same PC. I am facing one problem! Doesn't organize long cable USB 10 meters or even 5 meters. I heard because there is not enough power to read them in long USB cable. But I have weak laptop and still reads them like a charm but this HP elitedesk doesn't 😔
Would you happen to know where the p12 cord goes the pc won’t turn on for me and that is the only thing unplugged
Do you mean the 4 pin square connector? This one goes near the CPU: ruclips.net/video/Adi187EwEZU/видео.html
Greetings, I have a question. When I added an Nvidia Quadro video card, it does not show me the boot options. When I want to enter the BIOS or flash disk, the Windows screen appears directly to me. Is it possible to help? Thank you.
Could it be that the primary display is set different in the BIOS? If I remember correct, you can choose between auto, on-board or PCIe. You would need that last option in order to display the BIOS on the PCIe card.
@@jensdbe thanks
Can I use 2 hdd and 1 ssd on this hp model?
hello , i have a same model but when i start my pc i cannot get any screen. windows 11 already installed. i dont know what is the reason. can you help me ?
Not having anything on the screen can have a lot of causes. Assuming that the monitor still works, Is there still power? Lights on/fans spinning? If there is, try with only one DIMM or a know good one. If that didn't help, there is probably something wrong with your motherboard or CPU.
does xeon 1271 v3 work ?
i want to ask a question, im no stranger to taking apart computers but i always forget where which cable goes
Thqt can be a problem I guess :)
@@jensdbe can i add an extra fan to the case? i dont see any spart ports on the power supply for power
Question, I have that same HP 800G1, I am going to install a Geforce GTX1650, I know the power comes from the PCI-E rail thru this 240 watt power supply. Nividia recommends at least 300 watt power supply. Will the GPU still work and will it work properly? If I upgrade the PSU, the watt at the rail would not increase anyway right?
a GTX1650 is rated at 75W maximum, so the recommendation of 300W includes all other components. If you have just that card and maybe an SSD as devices that draw power (plus your motherboard, CPU and memory), you should be fine with the 240W power supply. The PCIe slot can provide maximum 75W so that will not chance by upgrading the PSU but if your total consumption would be over that 240W (due to additional cards and drives for example), a more powerful PSU could help there.
i have the 800 G2 sff with 200w psu, the rear 4x 3.0 USB are acting up, i use one for an external HDD with its own ps and a usb wifi dongle and it wont connect or connects but has hard time with little speed its an RTL8811AU and it works fine on the front ports 2.0 or 3.0 but the rear 3.0 it has issues why? i checked the bios settings and all seems okay set to default settings. anyone else have similar issues ?
Could you tell me antyhing about the work-culture of this device, please? I wanna know if it isn't too noisy to comfortable use.
By the way very good job.
It's pretty quiet. Not silent but far from disturbing. Changing the CPU fan with a better (more quiet) model migjt even make it unbearable :)
@@jensdbe Thanks, have a good day!
hello is it possible to upgrade one of these to an aftermarket motherboard? as long as it is the right size do you think the pins will all be compatible? i know these have a proprietary connector for the power supply but not sure about the others
It would be really hard. Better to get another (cheap) case and power supply. The board is completely custom, so mounting holes, back panel layout, power supply,...
Will the M.2 fit in this PC ? also a NVIDIA GeForce GT 640 video card ?
There is no M.2 slot for an SSD on the motherboard so you would need a PCIe card for that. The GT640 should work just fine as long as it is a low profile card.
Hi how much is your ram frequency is it 2 1600mhz of ram because on the bios setting of elitedesk 800 g1 sff there's no overclocking option(im not sure if there is overclocking) but does it automatically detect your 2 1600 mhz of ram or it will stick to it's default ram speed (example: my old ram speed is 1333mhz but cpu z numbers says it's 2 665mhz so it sums up) thanks for your answer friend.
It is 1600Mhz and that's the maximum supported by the board/CPU in this machine. As far as I know there is no way to force it, it's just what is detected. Out of experience I know that is not always going properly. CPU-z does tell the real speed, which is half with DDR
Can i remove the disk Reader and install another disk?
The DVD drive is a slim model. It's about the same height of a SATA SSD. The SATA data cable would also fit but not power. For that you could use a splitter from the other power connector.
when do use coms press in matherbored
Not sure if I understand your question...
Good Morning I have a machine of the same model. Please I would like a tip I want to run games on it and for that I need a video card. In this case which one would be compatible with this machine model. thanks for your video. BRASIL
AMD RX560 or NVIDIA 1050Ti should still work and are more or less ok with the rest of the hardware. The limit is the power supply and the fact that the card has to be mainly slot powered.
I have 4 beeps with mine?
How do I remove the back panel where the io shield
The back panel/IO shield is fixed to the case. The back is rivetted to the rest of the case so you would need to drill that out to remove it.
Can this PC be expanded to 16GB of RAM?
Can you put an integrated graphics card like the GeForce GT630?
16GB of RAM is no problem. A GT630 should work as well as long as it's a low profile card. Otherwise it doesn't fit in the case.
@@jensdbe I have read that it can also support 32gb of ram quietly since it has 4 slots
@@jensdbe Thank you very much for answering
Hello I’m currently trying to upgrade my pc case and I wanted to know what mm the motherboard is so I don’t get the wrong Pc case.
The board is pretty custom for this case. A standard power supply or standard board would also not fit in here. The board can't be powered by a normal power supply either (or you'd need conversion cables).
@@jensdbe So it doesn’t matter what mm the board is for any pc case like the Antec NX400.
which ram stick are they?
DDR3 1333Mhz should be fine
What is that cpu looking square on the left side of the sata
That is probably the chipset
@@jensdbe thank you sir i bought computer like that im just curious 🙂
What do 3 beeps mean when plugged into the power?
As far as I can find, it means processor not installed. So try to re-seat it maybe or test with another if that's an option.
@@jensdbe thanks✨
Mine is a prodesk but in the bios it says elitedesk does any1 know why
Hi I wanted to know for the Hyperx ram was it DDR3 or DDR4 just wondering which one you used?
Only DDR3 is supported
Now i am facing a error FRONT USB 1 AND 2 NOT CONNECTED😢😢
Hi yes. Does this computer support 1333mhz ram? Although the cpus supported for the computer all support the ram but I've never seen anyone try it before
As far as I know it supports up to 1600Mhz RAM. In any case it should work but might be running at a lower speed.
@@jensdbe alright thank you
@@jensdbe its just showing 1600mhz ram even though all cpus supported on the computer supports 1333mhz ram
@@jensdbe if its alright with you could you try testing it out if 1333mhz ram works with the system?
Subbed btw. You provide Great information about computers
Can i put in a bigger powersupply?
It's a custom power supply so a generic ATX one will not fit and not be possible to connect.
So I'm afraid the answer is no.
@@jensdbe okay thanks!
And it's original powersupply enough for an a8-6500b
14gb ram and a gt 1030 oc edition?
I want to run windows on an SSD. Is the Hard Disk Required?
SSD is fine and works well.
would these play beam ng drive effectively?
It will be on the limit and will required a video card upgrade as far as I can see.
Is it HDMI compatible?
With a DisplayPort to HDMI cable, you can connect the PC to HDMI, yes. This works fine.
@@jensdbe awesome, thanks!
What type of RAM did you use?
The RAM is Kingston HyperX DDR3, not sure about the exact type. I noticed that these line of HPs are not very picky with memory.
@@jensdbe tysm for replying! I recently bought a RAM for my computer but the RAM doesn't fit so I've been researching. Hopefully it fit this time.. Thanks again!!
Can it fit i5 6500?
No, I don't think it is supported. Only 4th generation Intel Core.
Hello,would i be able to upgrade graphics to GTX 550 ti ddr5 (hp 800 g1)
I have a similar question. I have the same pc with also 240W power supply. Would I be able to install a 1050 ti low profile without Power problems?
To your question. I think no you can't because you need a low profile gpu and the 550 ti isn't one as I know :)
@@bekirgencer4464 yeah I saw it I guess I'll play with Intel hd 4600 😅
@@Немања-ф3ф you could buy a gtx 1050 low profile ist is really cheap if you can find one for around 50-80 USD or Euro it would be much better then the hd graphics :) or of you can afford it a 1050 ti would be perfect or a 1650 super of course both in low profile
I have gtx 1650 super,works fine.
Hey I need your help I have a mac pro 5,1 and its stuck in target mode disk I cant reset neither do anything do you know how to fix ?
cpu made in VIETNAM
So?
This must be cooler temperature than the Dell optiplex Sff
OMG the hard drive bays on these are absoltue aweful. I don't know how you can scr33w up a 5.25 and a 3" drive bay but HP found a way. You can forget the traditional mounting via 4 side or bottom screws.There is no way to mount either drive in here without them flopping around. I finally just shoved a drive in there floating around and used foam to keep it from rattling.
And opening the case was infuriating as well. Instead of two screws on the back, there is a handle you have to pull up and yank on the top cover of the case. WTF. seriously. WTF HP. PC techs do not appreciate change. Or non proprietary connectors.
I would say, avoid these machines, even if theyseem like great buys. You can't put a ful height GPU in them, and the power supply is propreitary and only 250 watt. They are not as awful as Dells or Macs, but they are not much better either.
You do need to special mounting screws indeed, which can be a pain as they are not so easy to find. Without them it indeed feels pretty clumsy.
Agree on using proprietary connectors. Moving the motherboard or PSU to another case is near impossible so you can only use HP-specific replacement parts.
About the GPU, I guess this is simply not targetted at users that want a decent GPU. The tower version would be a better match in that case.
You shouldn't touch the CPU after cleaning it, you don't want that skin oil all over it ;)
Too late :)
I don't think it has that of a negative influence, especially compared to the old thermal paste.
How about the cpu thermal paste? Base on your video you didn't put one.
I do put that, see at 7:29 :)
where tf is the graphics card
The video card is onboard
Can you add a graphics card?
Sure, most low profile cards that do not require external power (like a 1050Ti or 1650) should work.
@@jensdbe would an rx580 nitro 8gb work?
@@Irishkiwi No, that requires both an 8-pin and 6-pin power connector and the PCs power supply has no GPU cables, so only lower power (75 watts or less) cards can work
@@paulbedford-holt6755 what if I bought a new psu