Chris, never belittle the tinkering we have no businessman here in our area in Western Pennsylvania that always said look after the pennies and the dollars will take care of themselves I think he had it right you catch up stuff on small fix it before it breaks something else your money ahead and the time as well spent
My buddy just bought a John Deere 2755 with less than 7000 hours on it. It is an AWD tractor, with a cab, 3 pt and pto. The old owner claims the A/C still works as well.
Hell, Chris you have climbed Mt. Everest in a year without a guide. Using your tenacios attitude, Yenko, and some true friends! 👍 This old man would be proud to call you Son!
See you at half century next week we are taking our John Deere a make sure you got a golf cart or side by side and if your going to the pull out your chairs out early to get a good stop
I’d just keep it R12 as long as there isn’t any leaks. Glad you had time to figure out the charging issue. I sure do miss your old videos that where longer. But your not really doing a long project with the tools or AG stuff your in a holding pattern to let it grow
I have heard you mention several times that corn needs "heat." Yes, except for one stage of its growth. When corn is in the tassel stage and pollination is happening, the upper 60's & low 70's is best. Until and after tasselling, corn does need heat.
Do you have a squeeze shoot for the cave's. We're you think trying to start your own herd ? Once their manhood is removed the only thing that can be done is sell for beef. If you could get famail cow, in the heard an start from there do $$ its going to take in the future going to be more costly. R.S.V.
Dear Duffy, with this type JD series , sometimes the problem lies in a bad connection ( or loose) cirquit board in the dashboard. If you notice that 4 wheel drive is just kicking in and and battery light is turning on, probably this could also be the failure not charging the battery.
R-12 cools better then r-134. Just buy the adapter fittings to go to r134. Change the dryer ,vac it down look for leaks and recharge with 134. Add some dye to the system
Please buy or fabricate a safety hydraulic cylinder lock for when you have the bucket in the air working on it. I knew two guys who aren't here anymore from dozer blades falling on them
That's a great idea. It's only 860 miles to Rantoul for Chris to have the tractor hauled there. With trucking $4-$5 a mile, it would only cost a minimum of $7000 to do that. And what a great opportunity for some fantastic video content.
4640 have 18.4 x 38 ? On Waterloo iowa craigslist there's a set of duals, 9 bolt hubs. For $600... don't know if hubs are right? Not to far from Rantoul.....
I guessed wanted to only selling for beaf or only grow feed and bedding. If I was only feed and bedding sell all three cow's and buying an bat Wing mower after you sold the cow's as bulls and stear or as all stears which one would give you the most money for a bat wing mower. The other options would be selling one bull and stear then buying one female cow and start from there with the heard. In any way you choose your the best! R.S.V.
Chris, never belittle the tinkering we have no businessman here in our area in Western Pennsylvania that always said look after the pennies and the dollars will take care of themselves I think he had it right you catch up stuff on small fix it before it breaks something else your money ahead and the time as well spent
My buddy just bought a John Deere 2755 with less than 7000 hours on it. It is an AWD tractor, with a cab, 3 pt and pto. The old owner claims the A/C still works as well.
Hell, Chris you have climbed Mt. Everest in a year without a guide. Using your tenacios attitude, Yenko, and some true friends! 👍
This old man would be proud to call you Son!
,keep trying to stay ahead of the seasons 🤛 👊 🤜
Progress wrenching👍. Corn comparison 👍👍👍
Great video Chris thank you for sharing and your time was really great never miss a video and can't wait for next video thank you.
It’s a beautiful view from over the corn back to the farm.👍
See you at HCOP.
See you at half century next week we are taking our John Deere a make sure you got a golf cart or side by side and if your going to the pull out your chairs out early to get a good stop
Corn is looking very good
All you is the little box regulator on alternator. 2 small screws, had one for 25 yr, put one in every 5 yrs or so
I’d just keep it R12 as long as there isn’t any leaks. Glad you had time to figure out the charging issue.
I sure do miss your old videos that where longer. But your not really doing a long project with the tools or AG stuff your in a holding pattern to let it grow
He can do longer videos from time to time. But he wants to keep doing daily uploads.
It makes the channel stand out
Cris you are doing a great job farm looks good
Best way to repair is tinker
First haha finally able to watch the next Duffy ag video right when it comes out great to see what you have been up to.
O ow my list has you second sorry
its harder than people think to be duffys first lol
@@tomrob64 dang one guy 2min before me oh well better luck next time
I have heard you mention several times that corn needs "heat." Yes, except for one stage of its growth. When corn is in the tassel stage and pollination is happening, the upper 60's & low 70's is best. Until and after tasselling, corn does need heat.
At least your are able keep going that's the main thing tinkering with stuff just means less to fix later on
Keep up the good work
if that is leaf lettus then it's ready for cutting as it will regrow and if left too long it becomes bitter.
Chris you can mix r22 with 135a we have done a
Do you have a squeeze shoot for the cave's.
We're you think trying to start your own herd ?
Once their manhood is removed the only thing that can be done is sell for beef.
If you could get famail cow, in the heard an start from there do $$ its going to take in the future going to be more costly.
R.S.V.
How Much does a Hereford or angus Calf Steers cost? I might be willing to invest in a couple with you.
Beefs at an all time high, tough time to get in.
That Channel has some beefy stalks!
Relay wont turn on ulness it has pressure in the system.
You do that don't forget to change your officerube on low side going into dryer too...
I had to do the alternator on my 2355 recently It was a lot cheaper to get it rebuilt.
You would be surprised what you can get done just tinkering around
Dear Duffy, with this type JD series , sometimes the problem lies in a bad connection ( or loose) cirquit board in the dashboard.
If you notice that 4 wheel drive is just kicking in and and battery light is turning on, probably this could also be the failure not charging the battery.
Xcel Auto Electric in Schenectady is great for starters and alternator rebuilds. Way cheaper than Napa.
R-12 cools better then r-134. Just buy the adapter fittings to go to r134. Change the dryer ,vac it down look for leaks and recharge with 134. Add some dye to the system
that also requires the change of the oil in the compressor
Please buy or fabricate a safety hydraulic cylinder lock for when you have the bucket in the air working on it. I knew two guys who aren't here anymore from dozer blades falling on them
Are you taking the 7520 to half century of progress
That's a great idea. It's only 860 miles to Rantoul for Chris to have the tractor hauled there. With trucking $4-$5 a mile, it would only cost a minimum of $7000 to do that. And what a great opportunity for some fantastic video content.
The heat has burn the corn up down south Louisiana. No rain
keep it r12
When the oppertunity presents itself. Disconnect the loader and never seaze the snot out of everything.
4640 have 18.4 x 38 ? On Waterloo iowa craigslist there's a set of duals, 9 bolt hubs. For $600... don't know if hubs are right? Not to far from Rantoul.....
If you buy ac parts I recommend ap air
Why not drop the bucket frame off? Looks like a quick disconnect.
the loader is a quick disconnect takes bout a minute to take off
That belt is very cheap to do now!!!
I guessed wanted to only selling for beaf or only grow feed and bedding.
If I was only feed and bedding sell all three cow's and buying an bat Wing mower after you sold the cow's as bulls and stear or as all stears which one would give you the most money for a bat wing mower.
The other options would be selling one bull and stear then buying one female cow and start from there with the heard.
In any way you choose your the best!
R.S.V.
Napa can probably get you a new or reman one cheaper than deere
Don't spray your lane up there by your signs it will wash out