My 96 I just slapped a ball bearing in my line just big enough to stop the fluid for the rear brakes.No more leaks I just keep it in 4x4 in winter stops good with just the fronts cheap fix.😁
If you're going to put a new master in get a NBS one. I put a NBS one in my Turbo LS OBS chev and it made the brakes feel way better. All you need is the new master and a 9/16-18 female to 1/2-20 male adapter.
I need a replacement engine for my 05 it says 05 and 06 only was the Gen 4 lh6 anything before was lm4 sure I could use an lm4 but then I got to change the cam gear and this and that wish I knew what year that was
Man that artic blast we got last week was awful here in TN!!!! I fell for you guys up there with neck deep of snow!!!
Shoulda picked up a cheap 99-06 rust free Silverado when you were in Vegas, I heard they come pre-LS Swapped.
Hell yeah Junk yard trip... Oooowee
Clayton should get dual citizenship with that hoodie 💪👍🤘
Keep up the awesome video’s this winter!
My 96 I just slapped a ball bearing in my line just big enough to stop the fluid for the rear brakes.No more leaks I just keep it in 4x4 in winter stops good with just the fronts cheap fix.😁
4x4 is key! Lol
That blazer would be a good frame up build series
Cold and hard bushings will make the same noise. Nice to see you guys again
Great video guys
Unless the frame rails go keep running that old pick up 👍
Just do the nbs master cylinder swap. Direct bolt on just neednto get a fitting for the brake line on the master
White lithium grease starts spraying down all your bushings
Fuckn amazing guitar licks Mike 🤘
If you're going to put a new master in get a NBS one. I put a NBS one in my Turbo LS OBS chev and it made the brakes feel way better. All you need is the new master and a 9/16-18 female to 1/2-20 male adapter.
fresh riff
Envoy had a lh6 gen3/4. Gen 4 rods, 799 heads, good intake, afm, 3-bolt cam. Lots of good parts
I need a replacement engine for my 05 it says 05 and 06 only was the Gen 4 lh6 anything before was lm4 sure I could use an lm4 but then I got to change the cam gear and this and that wish I knew what year that was
these are great trucks just fix things as they go she will last a long time yet
BROTHERS
Nice crew jealous my crew retired
That squeaking noise might be the ball joints! Come on Rob Dawn dish soap is the best for washing clothes!
Have you ever greased the ball joints? That's what that squeak sounds like
Grease whats that??!!!🤣🤣🤣🤷♂️🤷♂️🤷♂️
The squeaking is going to be dry ball joints
First comment keep up the good work boys
Why would any car guy buy a master cylinder from a wrecker when a new one is only $70 from rockauto ?
Because they’re probably less than 20 from the junkyard.
@@mcfero1 you don’t chance it with brake components
You should buy him one.
@@rd95stang if you can’t afford a $70 brake part you should ride the bus until you can. You gotta get your priorities straight.
@@MrLangleyladdo you happen to have a list of what parts are acceptable to recycle and which parts aren’t?
Thanks!