How to install Ninebot Max External 48V Battery Upgrade
HTML-код
- Опубликовано: 2 авг 2024
- How to install 48V battery upgrade on your Ninebot Max. I have been waiting a little while to get the finds to be able to do this. Finally, I have managed to save enough to get this brilliant mod for my scooter.
Install software videos
iPhone • How to HACK your Nineb...
Windows laptop • How to Hack and Reset ...
You can get this upgrade here. mymaxmods.com/ 
Наука
Hi! when you install the second battery are they connected together ? i mean they work at the same time ? Can you fry your engine while using 2 battery ? I need an upgrade because now i do like 40km with my own battery so i need to double it. what do you recommand ?
Does this allow you to use both the internal and external battery at the same time? I'm not sure what this actually does. Does it go any faster? Thanks.
Thanks for alll the videos! Just got my max
I got mine used but it didn’t come with charger for 48v battery and when I ordered the battery it still not powering the scooter after charging so do I need to flash it or is it possible that the battery is damaged?
Will this work with a g30p? Xiaoflasher doesn't want to seem to work with it other than the brake lights flashing and it says that I need to use it in order for it to work. Any help would be truly appreciated!
What setting do I need in Xiaodash for the 48V mod?
It appears to me that my existing battery cable comes straight from the battery directly to the controller.
Does this mean I have the new 1.1 AT-based controller?
And will I still be able to flash with this?
Nice video, can you explain the Safety wire connector? What is it exactly? Just a wire that loops itself to close the circuit when not using the external 12 volts so you're able to ride with 36 volts?
where did you get those front and rear shocks from? i have an upgraded suspension system already, but really like those ones you have!!
What suspension system did you buy for your max? I don't see those anywhere
will it work on ninebot f2
Hi, the video was fantastic. By any chance do you know if the current Battery Pack needs the firmware?
will that fit on a aovo pro mate because i have been thinking of gettin one
Where did you end up getting your replacement bottom panel? My overzealous electric screwdriver has made a mess of mine. Preordered the rear sharkset, so I hope you make an install video for that because your one on the front was invaluable. Would also like to see the Fat Max motor tested in the future, because that looks like a meaty performance upgrade.
What’s the scooter companion app? I can’t find a link?
Hi, where did you get your tires at?
How much more riding did it add by putting that battery on?
You can’t run the battery pack on the latest firmware ? That be a specific one ?
is this compatible to F25? I want something that can make the F25 better cause I cant find anything for it
Is this compatible with the F65 ? Also my F65 only limits me to a 22km/h in sports mode. How do I increase the speed performance.
Do i need to flash my scooter for the extra battery to work?
Hi ist das maximale Drehmoment Spitzenwert von g30 max 750 Watt?
Und das kann aus G30 Doppelmotor hergestellt werden
hi i have the aovo pro 2 and it does 20mph and i have bought the battery box how much was it to buy i really could do with that to knock the speed up abit is it possible to send us a link so i can get one thanx and great video how fast does it go now in mph
I have placed a 48v battery on my e scooter, but now I have the problem that when I accelerate and then brake, the scooter continues to drive via the brake, what could be the problem?
Got my 48v battery and plugged it in. Once i got it running, it will turn off after about 30 seconds of riding. Do you know a fix?
where you got the y cable
would this work from other brand scooters?
Brilliant video presentation, saved me a lot of messing about
Is 12 gauge good enough to not melt my cables?
Hey, what did you use to close the cable insert after install? I followed your video it's great but I am a little worried about leaving that bit open
only compicate thing is softwer..instaling batery ic nothing...if i instol dis on e.u controller does it vork?its limitted on 25kmh!
Can i do with ninebot f40d ?
Where I can buy that kit ???
great to see you back bud.I am ordering this unit next week
😸
Thanks dude. Videos will be slower. Winter is now here. And less mods currently haha
@@ScootLetsGo Did you buy this direct from MaxMods? there is so little info on his site.Is shipping included?
Yeah I did. And the shipping is added on separate unfortunately. To the UK it was about $50-60usd
@@ScootLetsGo Thanks bud , good to know. His website is next to useless for any concrete info.
@@974 Yes it is. Great little kit well worth the upgrade
do you need to unplug the ext battery to charge both batteries or I can plug both at the same time while being still connected in parallels?
Highly recommended that you charge separately and unplugged from the scooter
Is there any anti theft housing?
Will this work with a 36v battery as well or no?
Thank you for this tutorial!
What breaking system replacement would you recommend? I've been using the original for over 4k miles now and seems to be wearing out. I also tried to take the break pad off and it's given me a headache so I left it alone.
Hey. I would continue using the brake system in place now. Just get new brake pads. I’m currently looking at other options
@@ScootLetsGo Could i use this for g30lp
@@ScootLetsGodoes the external accu work with max g2 segway ninebot?
Where did you get those shocks / suspension? Are they an add-on? Also, what model Ninebot is that?
Its shark suspension, the model is ninebox max g30
Great video man. Keep it up. btw do you have any solution for the rear suspension fenders? I installed the same rear suspension that you have on my ninebot max but I keep getting splashed by the rain/mud all over my back/pants. Also did you preorder your sharkset rear suspension yet? I don't know how good it would be but looks cool though in that 3d design. cheers!
Unfortunately, I get a little mud and water come up my legs too with this suspension. I think best thing you can do for now is to create an extension fender maybe.
I am patiently waiting for the Sharkset rear suspension ;)
@@ScootLetsGo Thanks for the suggestion man. I actually did end up adding an extension fender, basically the front one that was lying spare after installing front suspension. I drilled a hole through the back fender and put the the spare fender screw through it with few washers. Doesn't look pretty but its kind of working.
Can you do a video installing the 20 ah
How much further can the scooter travel on one of these batteries? Over moderately hilly terrain, the regular battery gets about 20 miles.
This battery is more designed for extra speed. So wouldn’t get much more range from it. If you want more range. There are batteries that are designed for it. And my max mods sells both types
My kids have several F35 scooters that are 36v. I have a pile of 48v batteries for my ebikes. Would drilling a hole and popping the Xt60 out of the scooter and plugging in my 48v batteries be a plug n play solution?
Charging them externally with the ebike charger.
Or is the controller, motor all sized for 36v and will be ruined by feeding them 48v does anyone know?
Can it also for es2
Informative video and well filmed. I wonder, could this battery pack be altered to fit the F40e?
I came for the same😢
You have a link for the battery pack thanks
Hey, great video! Finally someone who shows you how to install the 48V system!
Could you possibly make a ride video? And with the maximum speed and range ??
Would be nice!
Thank you.
There will be more videos coming up when I get some time :)
@@ScootLetsGo ❤thx
sharkset says their rear suspension will start shipping out next january, are you going to have it before then? I'd like to see a video about it before i buy. thanks
I hope that I will have the rear suspension to review. But there are no guarantees
Black black red for series not red red black so I'm totally confused I'm trying to wire it up from scratch with 12 awg wire
You connected the batteries on serie? The adapter isnt a parallel one
The batteries are supposed to be connected in series. Internal is 36V, external is 12v. In case you're getting any ideas, I once tried to use an ebike parallel battery device to connect another 36V battery in parallel and somehow it fried multiple controllers as I kept trying, and no, it wasn't my technique because I made it work on an ebike doing the same thing. Each time I tried, the scooter would work until I used the brake (activating regen) and then it would die. The controllers all had a blown chip afterwards.
I feel like if you're gonna open it up may as well just upgrade the internal battery to 48v then sell the original one or keep it for back up.
The external battery doesn’t interfere with the dashboard
two questions!
does this work on g30lp and if so is it the same process?
will my scooter still be water resistant after installation?
great vid!
also do i lose any range? if so how much?
How much range does this battery adds?
I think it adds 30 km more distance
Is the battery lighter than the main? If it is lighter...what happens if you remove the main and use 2 external packs?
It’s lighter. But you wouldn’t get very far with it. As it needs a bms and it’s only 12 volts.
@@ScootLetsGo it's sold out???? How do I get one
Will it work for f40 ?
Where did u get suspension set up ?
This is from sharkset. You can see my other videos :)
I see you have proper tires with Sharkset. Did you manage to fit 11" tires with sharkset? Thanks for your videos!
Hi, these tires are non offcial off road ones. Which are slightly larger. You can checkout the video when I put them on. However, I would probably recommend that you stick with the factory tires.
Wowww I like to install alsa like that battery to my scooter is it possible to install to MS ENERGY M10 Bro????
Would this kit work on a hover-1 Alpha?
You would need to have a word with MyMaxMods on that one buddy.
Where did you buy a external batery?
I got mine from mymaxmods.com
Ninebot wiring is pretty much The simplest to trace and add to if you wanted.
Now my curiosity;
Could i do this on my F30? I dont doubt it. Then again, I'm no electrician
as well as those tires!!
Is this done for a range increase or speed increase?
Will be for both.
What are the specifications of this additional battery?
Volt, Ampere, Ah and Watt???
I want to know too
I want to know too
@@mrdouadi1105 it is not on the website.
It's a 3s6p 12-volt 15.6AH pack.
@@mikiggs isn't it a little pricey for around 300$?
Does anyone have a link for the extra battery?
Link in description
someone has been putting kaabo 10 wheels onto them Segway ninebot g30 and it's looks way better then stock wheels and best way to installing alarm kit to scare most thieves during day/night it's helps saves own scooter without getting stolen without any hassles and I would say Segway ninebot is too notch for having so many good features setup for streets only
I wanna make a custome police scooter with lights and everything do you maybe have any tips or a vid
Stickers would be simplest way with adding rgb with a custom light sequence :)
nice video,for the ninebot max g30 parts whole pls let me know,wish i can help with our 300+ parts
Nice vid keep it going💯
Thanks dude 😝
@@ScootLetsGo I wanna make a custome police scooter with lights and everything do you maybe have any tips or a vid
Nice video mate, you explain really well!
Do you have a gen 1 or gen 2 motor?
I have a gen 1 motor on my g30 max, if I install this kit will I get some speed boost too? Thank you!
Hey. Thank you.
I have the gen 1 motor. So you should get the same boost as I do. :)
@@ScootLetsGo great thank you!!
What is the true width of those off-road tires when inflated? Could you measure it? I would appreciate it! :)
Sure, I will take the front wheel off in the next couple of days to take out the RGB, so I can show you then.
Did you know? scooter tires with the 10x2.75-6.5" dimension fits perfectly on these bikes. it's a match made in heaven, I use it on mine and it raised the bike 1" off the ground. I had to use a tube with these tires though but since I changed from stock I haven't had a single flat
ohh by the way, 10x2.75-6.5" fits inside the stock fenders of the ninebot max, you don't need to modify or remove them when you use this tire size for the ninebot. it cost me about $40 with shipping on aliexpress and you can get both city and off-road tires in this dimension. Must have upgrade :)
How i can find online for buy it
mymaxmods.com/ you can buy here
Does this work on the blue ninebot max?
Did you get more range. And how was uphill climb??
I actually haven’t had a chance to range test with this on. However it’s not really going to add more range as it’s more of a power upgrade. You can get range extender batteries from my max mods.
@@ScootLetsGo I'm trying to decide. I need more range. I might just get the external battery. 36v.
21 mph top speed with both batteries?
I have the Gen1 motor. So I will not get much more speed without upgrading the motor
Threadlock on aluminium?
The orginial screws that came out had thread lock on them, it also adds a little more protection from them coming out.
My 48v battery came with two 3d printed brackets for solid mounting to the stem of the scooter.
You must have purchased mine after I did. Unfortunately, I didn't get these.
@@ScootLetsGo we just recently added them, we had no idea you ordered a kit 😅🤣 well send you a message to get you the mounts :)
@@Mymaxmods I popped you a message a while ago, but not to worry, you’re a busy guy hahah. Thank you 😊
@@Mymaxmods Hi Max, just browsing here I have a segway ninebot F30 and would like to extend range and speed slightly what battery would I need for this and would the one in the video work?
Does this also work with 2nd gen?
Do you mean 2nd gen motor?
@@ScootLetsGo yes
@@ScootLetsGoand how much does the external battery increase the range in your scooter?
@@theslavemotivator3571 yes it will work.
@@theslavemotivator3571 this one isn’t really a range extender. This is to increase speed.
You can get a range extender though
Can you do a video on how to hack ur ninebot max on apple again
You realise that Ginger on Wheels bricked his Ninebot after installing this unit. It toasted his controller. You need to upgrade the connectors. . .
No not aware. But this will be something I will look into
@@ScootLetsGo He took the scoot to a pro mechanic and they discovered that the connectors from motor had melted. Suggests replacing with M60 connector (heavy 3 wire connector).
Ginger did a ride test in 100 degree weather and melted the stock phase connectors. We did the video with him and upgraded his phase connectors afterwards. But it was due to the stock plastic connectors & even happens stock.
@@Mymaxmods It does happen stock which is why I have MR60 connectors ready for when my kit from you arrives.
As for the temps...they ride all year round in Aus and 100deg. is nada down there LOL
Indeed, even stock connectors melt mostly when you adapt the firmware already a little bit , so for sure do an upgrade of those when you go 48v … plenty of options.
Will this work with kka A,3 max clone
If only it has the same controller and core software. If I had one to test I would.
So if you do decide to try. Please do it with caution.
put on a monorim back suspension
I don’t want to drill holes on my scooter
@@ScootLetsGo I still don’t regret I placed the monorim … as you asked me those days if I wouldn’t 😉 . But if I in future can switch to Sharkset and it is not a problem with the drill I did, then I do that without a doubt. Just I noticed that it is not that easy to get a Sharkset ordered without “ inbetween sellers” and the extra costs that brings…
I believe that Max 30 have 36v battery...
Your basic battery was stock 48v or you upgrade..
I had the stock battery
@@ScootLetsGo the stock is also 48v?
36v
it s a 12v battery. 36+12=48
Much better to mount the new battery on the handlebar stem, otherwise it takes up too much room at your feet.
I will be playing around with the placement to see what best suits me. :)
I dont understand why you did not show at what point you flash the scooter. You just say it needs done and then mention that you already have a video showing it but the one you link is for a windows laptop?? You also never actually hook the whole system up as you end the video with only the main battery hooked up.
Very disappointed bud. This is only half an install video , not a "how to" as the tile suggests. Are you going to make a follow up explaining what you left out and with the job actually completed? All of your other how to videos are very detailed and some of the best on the internet. Really too bad this one is done so casually without concern for accuracy.
I appreciate your feedback. I will be doing a follow up video and will address any concerns. I should have waited a little longer to do this video and put a little more effort into it. I did have covid at this time and it drained the life out of me.
As for showing the wiring. I did show this at 10:00 minutes in.
The firmware can be updated at any time as it will not mess with the scooter if the battery is not installed.
Forgive me on this one. Better content will come :).
@@ScootLetsGo I do apologize bud. I had no idea you had the C. You look better when your sick than I do on my best day LOL. I really like your videos ,watch and leave a like on them all. My kit is on the way from MaxMods so I look forward to any more info you have to show in a new video.
take care and stay safe bud.
Thanks dude. No one’s expected to k no w that I’m Ill. I didn’t say I’m the video.
I should have waited till after it had gone. But I used it as an opportunity install as I couldn’t leave the house haha.
Hopefully I can get back to some quality videos in the near future :)
thread lock is not a sealant, those battery cover screws are already a goddamn pain in the ass no reason to make them a bigger pain in the ass. that little 12v battery was a big waste of money and time.
Apple sucks say Android 🤡
All that red cable wrap makes it look so tatty, it's so cheap it's basically clear. Should of spent a bit more. My autistic brother could have done a better job
please send him round :)
I can't stand the noise your face is making(while you pretend to speak the Human language) so I checked the description and still faikex to find the key point:
*HOW MUCH IS THE IMPROVED RANGE OF THE SCOOTER... so much useless rambling.*
I want to do this soooo bad but I'm afraid I'd screw it up lol
It's pretty easy. If you go ahead and bite the bullet and buy this, you'll be able to followe my video. :)