I already have this in blue... I'm going to have a look at this in SS on Monday... it needs a new home!! My Blue one only came with One Mag.. Thank you
WD-40 is pretty terrible as a gun oil. Get yourself a can of Breakfree CLP. Stands for Clean, Lubricate, and Protect (from rust). It is probably the single best product for doing all three at once, as.long as you shake it well before use. (Incidentally, that is three things WD-40 is comparatively useless for.) Or if you want a snazzy alternative, get yourself a can of Ballistol. Those are probably the best two on the market. Wd40 would be toears the bottom. Lucky your 1911 is stainless so there is no bluing for the wd40 to ruin but it is still a sweet piece of machinery deserving of the best
I agree. WD-40 has solvents that are stronger than you need for firearm maintenance and lubrication. Even common synthetic motor oil is better for your gun than WD-40.
Thanks for the detailed vid. I just ordered one. I usually mess with them and do beavertail grip safeties and modern hammers but because this one is stainless I want to keep it the way it is old school looking.
The COLT 1911 is the only 1911 people should buy. All other non-1911 pistols are counterfeits. it is beautiful ! .....but, is reliable enough to fire 150 rounds without malfunctioning?
@@unitedstatesirie7431 So, the most valuable M1911A1 pistols, which were manufactured by the Singer Mfg. Company (the sewing machine company) with no Colt-manufactured parts worth as much as $414,000.00, are counterfeits? Your comment is an interesting way to announce your ignorance of the subject to the internet.
It's too bad they use laser etching for the roll marks instead of stamping on some of their guns. Also, I hate it when the roll marks are crooked (right side seems a little crooked, not too bad, my lady friend had a Gold Cup that was much worse). A pet peeve I guess.
@@apptituder that COLT 1911 is functional jewelry. Beautiful art ! 💎 The only thing I would change on that pistol is to replace the silver screws on the grip panels with black screws.
@@apptituder but they fell off back in the day like 80s 90s and early 2000s I had 3 different colts but they were al series 80 and had plastic parts on them.at the times I didn't know cause I had just gotten into 1911s and was under the impression that colts were still the best. Until a gunsmith pointed out how colt came out with the series 80 and started cutting cost and corners and went out cheap as a result of that there quality and quality control plummeted it was so bad that it even spilled over to their revolvers and people stop buying colts and that's why they file for bankruptcy several times.
![NoCap - Maliboo [Official Music Video]](http://i.ytimg.com/vi/FUV7E0QyniU/mqdefault.jpg)
Hell yea sprang for it and got the real Colt! That's a dream pistol right there for most.
🥰
I already have this in blue... I'm going to have a look at this in SS on Monday... it needs a new home!! My Blue one only came with One Mag..
Thank you
Absolute Beauty❤️
WD-40 is pretty terrible as a gun oil. Get yourself a can of Breakfree CLP. Stands for Clean, Lubricate, and Protect (from rust). It is probably the single best product for doing all three at once, as.long as you shake it well before use. (Incidentally, that is three things WD-40 is comparatively useless for.) Or if you want a snazzy alternative, get yourself a can of Ballistol. Those are probably the best two on the market. Wd40 would be toears the bottom. Lucky your 1911 is stainless so there is no bluing for the wd40 to ruin but it is still a sweet piece of machinery deserving of the best
I agree. WD-40 has solvents that are stronger than you need for firearm maintenance and lubrication. Even common synthetic motor oil is better for your gun than WD-40.
some ATF transmission fluid works good
Beautiful Colt.
Just got a Series 70 myself. Are the Slides, frame and barrel forged by Colt still?
Thanks for the detailed vid. I just ordered one. I usually mess with them and do beavertail grip safeties and modern hammers but because this one is stainless I want to keep it the way it is old school looking.
How much did you pay ? Is it the exact same one as in the video. Which model was it that you got.
I got this same model O1911C-SS. Was able to get it for just under $1K.
Beautiful.
Beautiful handgun ❤
Will this fire hollow points with no issue
Nice choice. A legend.
Thanks bro! 👍
i remember opening that blue case for my commander years ago.
Lovely firearm 🇺🇸🇺🇸🇺🇸👍
Vเยี่ยม
👍
Slide and frame fit any good? Does the trigger rattle?
The fitting assembly is tight, the trigger is quite sharp.
Amazing firearm❤
Thanks bro! 😊🙏
The COLT 1911 is the only 1911 people should buy. All other non-1911 pistols are counterfeits.
it is beautiful ! .....but, is reliable enough to fire 150 rounds without malfunctioning?
@@unitedstatesirie7431 So, the most valuable M1911A1 pistols, which were manufactured by the Singer Mfg. Company (the sewing machine company) with no Colt-manufactured parts worth as much as $414,000.00, are counterfeits? Your comment is an interesting way to announce your ignorance of the subject to the internet.
@@enscroggs no, the Singer manufacture company produced clones of the COLT 1911 pistols. The EMPIRE STRIKES BACK with .45 acp "Storm Trooper" clones.
Handsome gun
Sure is purrdy!
😁👍
Linda!
😊
Don't use wd40,. You want lithium grease. Wd40 accelerates rusting.
Thank you for your advice 😊👍
It's too bad they use laser etching for the roll marks instead of stamping on some of their guns. Also, I hate it when the roll marks are crooked (right side seems a little crooked, not too bad, my lady friend had a Gold Cup that was much worse). A pet peeve I guess.
Where in the phillipines to buy that?
I have no idea 😄
Beautiful Gun what more can I say
😊👍
@@apptituder that COLT 1911 is functional jewelry. Beautiful art ! 💎 The only thing I would change on that pistol is to replace the silver screws on the grip panels with black screws.
Gorgeous! How much? Is it 9mm or .45?
That guns about $900 It looks like 45 ACP
Yes it is 😊
ซื้อจากร้านไหนครับ
ได้มากี่คะแนนค่ะ แนะนำร้านให้หน่อยค่ะ
How much did you pay for this gun?
The one I bought embarrassed me. DDR Makarov were superior
ถึงไม่มีโอกาสได้เป็นเจ้าของ แต่ก็มีใจรักครับ
😊👍
That must be your first gun bro because you keep dry fire in it and everything 😬
This is my fourth gun already 😆😊 Thanks a lot bro 😊👍
@@apptituder Well it’s your gun you can do whatever you want with it but you were raping that thing with your fingers as soon as you got it 😂
Sidhu Moosewala k pass bhi yahi thi 😌
😊👍
สีเงินหาไก้ที่ไหนครับ
ตัวนี้เป็นล็อตสุดท้ายก่อนโรงงานโคล์ทจะโดนเทคโอเวอร์ไปครับ ร้านแถงวังบูรพาครับผม
bro dont use WD40 on your firearm lol
I totally agree with you!
Are you tung tied!!
Assalam o alaikum kis se mang wai hy mere ko uska Link bataon
😊👍
I thought colt only sent one magazine these days
I was surprised when I saw that...mine came with one.
how much is this
In Thailand, guns are very expensive.
La cartilage
Like I don't like
Like I don't like her black eyes only
Flashlight holy cup
Cant believe you dropped the slide on empty chamber
It’s OK 😊
Esa no es una serie 70
👍
Not a good unboxing! Please next time take out the manual and turn the pages… and also focus on minutes for no reason on the lock! Thanks!!
Thanks for your advice. 🙏👍
All I know is that if that Colt was mine, I wouldn’t be slamming my slide on an empty chamber. I consider that abuse. Like I said that is not my Colt.
The Springfield Mil-spc is better
Agree with you, colt is not perfect but it is a legend. 😊
@@apptituder but they fell off back in the day like 80s 90s and early 2000s I had 3 different colts but they were al series 80 and had plastic parts on them.at the times I didn't know cause I had just gotten into 1911s and was under the impression that colts were still the best. Until a gunsmith pointed out how colt came out with the series 80 and started cutting cost and corners and went out cheap as a result of that there quality and quality control plummeted it was so bad that it even spilled over to their revolvers and people stop buying colts and that's why they file for bankruptcy several times.
@@TheRealZJE313 BS, the only plastic parts might be the grips.
@@jpascaln no no the main spring housing and few others. But like I said this was back in the day. So it might have changed cents CZ BOUGHT COLT
Can’t hit a thing with the Springfield