Several years ago, I had bought one of these old service station island oil racks. I did the same rustoleum paint jobs on it, and got the same results. after a week or so,it has dulled out. I then went and scuffed it down I think with 1000 grit, and used rustoleum clear on it, and got a nice shine that lasted. My issues was more with my prep. After a year I started getting bubble from under the paint. It appears that product you used on the fender dried harder than say rustoleum or other rattle can paints? I have a older car which I am planning on painting in a year or two. But I recently had a shop do some engine work on for me, and they used that sticky clear plastic fender cover on. they stuck it on the inner fender they left it on for for like 3 weeks when they pulled it off it took the paint on the inner fender off. Is this UPOL system something I can use to to mask off this area of and do a spot repair?
@paintucation could you link the cleaner, shop towels, and all the equipment you use in this video? I want to begin tackling some automotive painting in my garage.
@@NorthO-i9c It is just paint, there is a difference in someone wanting yo just spray painting, and some one doing the job correctly. I have seen quite a few rattle can paint jobs that looked good.
Ive said it many times. Kevin is a phenomenal teacher and has no problems showing mistakes, alternate ways to do things, or telling you when he finds another avenue that may be benefical to you. This is what makes him different as a teacher AND more importantly......a person. With him helping on these videos, staying in the comments here and on his social media, just inagine what you're missing with his actual training through Paintucation. Check it out folks.
About 4 years ago I did a rattle can paint job on an old Honda. Everyone is familiar with with 90s Hondas peeling clear coat. We used Aircraft paint remover and carefully removed all the paint. Used a rattle can of light grey primer, 6 pack of red sunrise rattle cans, waited 2 weeks and keyed the paint with 400 grit. Used 2K clear rattle can over the top. Brother, it was perfect... This many years later it still looks like new.
So glad to have just found Kevin on RUclips. It was a Paintucation DVD I bought probably 20 years ago started me off painting, I’ve lost count on how many paint jobs I’ve now done. A big thanks Kevin from the UK and look forward to watching your videos 👍
That is amazing! Thank you so much for sharing this with me, that warms up my heart and makes me want to keep on pushing. :-) seriously, thank you for sharing this!
The wife's T-Bird was the absolute clincher for me. I have a few minor scratches in my wife's and I believe it might be the same color ! I've been dreading a full on pro-paint for the scratches but they do drive me nuts. I see a trip to Auto Zone in my future before winter sets in, Thanks so much for pursuing this series on rattle cans, "You the Boss"
I watched you paint the motorcycle tank and, in that video, you made the comment, "I don't know why I'm talking so much". I retired from the floor coverings installation trade and, in the course of my career, trained several installers. The constant talking, as you're working, is a very good teaching tool. As your students are watching you work, they are hearing what they are seeing, making understanding much easier. I'm in the final stages of restoring a 1981 Corvette and will soon begin the paint process. I've been surfing U-Tube videos for someone who explains the paint process in a language I can understand and finally found that with your videos. I've never painted a car before, but am confident I'll get the idea from your videos. Thank you for the detailed explanations.
Thanks!!! I'll certainly do some paint projects here on RUclips, but I have several instructional videos available that show detailed paint training. Let me know how I can help!!
I noticed you used a small screwdriver with the pad for the crevices …I was waiting for it to poke through and scratch the painted surface 😬. My thought was a wood dowel. You can grind the point to fit and have much less risk of creating more work by scratching the surface you are painting. Just sharing my thoughts…I love your content and the fact that you explain processes thoroughly 😁
"I'm going to be using the same exact type of stand..." These are the jokes/attitude some of us are here for, and why Kevin gets along with Derek so well. Professionalism isn't found in the products, people. It's found in the people.
I literally watch both part 1 and 2. No skipping or fast forwarding. I enjoy the chat while working because that's when useful tips often come. I like that you made mistakes, explained them and showed how to fix them. I've definitely learned a lot and look forward to trying this out and seeing more videos.
Upol is the king of coatings, they have an entire line of diy products that actually last. They are far superior than Rust-Oleum and duplicolor, I've been using upol for almost everything and can't beat the quality sure that brand is a bit pricey but man is it worth it lol. Great job Kevin 👍🏼
Those are some amazing results!!! I have to give you kudos for not editing out the dreaded paint glove drip. It truly shows that hiccup’s like those happen even to the pros. It gives us wanna be’s the will to push on and work through it. Thank you for the Great Vids Kevin and keep them coming….
I'm been in the automotive repair business for 45 years I've seen some of the hacks for the spray can paint shaking next time try using two hose clamps it works better. Be safe and keep on doing what you do.
Great tutorial video! Here’s another tip, keep a paper towel in your back pocket, and every so often wipe the spray can nozzle. They have a tendency to build up blobs that can end up dripping into the finish coat.
That finish is amazing. That's perfect for a DIY job on a motorcycle or a 4-wheeler. Hell, if you can get these cans with a variety paint codes, you can blend panels for rust repair/replacement/repair. Very cool. Paint technology has come a long way.
I use Upol a lot and am very happy with it in certain circumstances, kind of like what you are doing in this video. I've had the same issue with my fingertip interfering with the spray. I stopped wearing a glove 🙂. I learned a lot watching this video. Thanks very much!
Kevin, I just like watching your videos. You’re an amazing talent & teacher. I have painted A LOT of stuff over the years. Both with a paint gun & with rattle cans. Nothing professional. Just raised kids that liked to wreck cars etc. Yet I’m always willing to learn & I like how you educate but don’t talk down. I wish for your channel to take off & grow beyond your own imagination. I feel like when I’m watching you, that we could do a class & drink a beer after while we wait on paint to dry. Keep it up. I’ll spread the word.
Hack? no lets not call it a hack. Everyone seems to over used that word for anything that makes things easier or gets a job done. Tip or trick should be the right word. Thanks for all you do Kevin.
Watched this and the tank too, I might be discovering that I have an inner painter emerging! Have to thank you for these videos as they have really helped me finish a piece of furniture that must go out the door like now and the paint was a really cause for pause, this essentially got me through. Now I want to learn the art , cheers
Its so refreshing to see a professional who's not an absolutist, its annoying to see guys die on swords just because they dont have the skill or experience. Well done brother!
The excitement you get talking about the two stage breakdown is amazing. Passion makes for a great teacher. Loved watching you even back in the Trucks days.
Wife backed into a friends car, hit right in the fender. I was able to use the color match camera at O'Reilly auto for a perfect paint match and then the 2k aerosol clear on it. Turned out amazing, I will freely admit I am a paint rookie, I have only used a spray gun one time in my whole life. I can completely vouch for what Kevin is saying here. You can get an amazing finish on small areas using spray cans. Nice work Kevin, thanks for all of the great content!
Sometimes expletive potty mouth words are the best descriptions. I really enjoyed this and learned from a mistake I've made several times. I will now always clean up my over spray !
I have had very good luck with upol products in the past and I love them. They have terrific products in my opinion. So glad you did this video. You are a fantastic painter and an amazing teacher. I still enjoy watching your paintucation videos. Still picking up things each time I watch them.
Going to try this rattle can method on the motor cover of my outboard motor. Paint faded from the sun. Still will use the 2k clear but you got me motivated with this method. Never did it but want to try it. Still cannot wait until you start working on Ziablo! Thanks again for another great video Kevin!
Thanks! I have done a lot of rattle can detailing on daily drivers. Love that you followed up. Hope to see more small do it at home projects like this as you come across new products and techniques.
This video came at a perfect time for a project I am working on. Thank you so much for laying out the steps. Yes its a lot of work and many steps, but it does work and you proved it out for us. Thanks.
It just goes to show everyone that you can get great results with the right preparation, tools and techniques. Looks fantastic. Have a small rust spot on my driver side rear wheel opening near the top. Have watched your videos for a long time, but just wondering how to repair it properly. Have all the supplies to get started. Going to use 2 stage system. Your input would be greatly appreciated. Say hi to Derek next time you see him. Great job 👍🏻👍🏻👍🏻
This is a fantastic series. So cool to see how each step up in DIY level, compares. Next up, 2k rattle cans? I know you said that was a diferent PPE setup, would be nice to see DIY versions of that too!
I'm into high power rocketry and I've painted rockets with both automotive type paints (2 stage) and rattle cans. The rattle cans give a decent finish and like the tank you did, too many coats causes them to crackle. With rattle cans I found if I need more than 1 coat I let it off gas for a week or two, sand it down smooth and hit it with another coat. Most times I will not have an issue with cracking or delaminating paint. I have sprayed out a rocket with rattle can paint and followed it up with an automotive clear with decent results. I do get delamination of the clear if I don't allow everything to cure for about a month (our launches are 1 a month in good weather). The last rocket I sprayed with rattle can paint and automotive clear delaminated on the 2nd launch but on the first launch the nosecone hit the body tube and scuffed the paint and clear. The clear peeled off on the second flight. Painting with rattle cans is always a crapshoot but with 2 stage I always get really good results. I'm definitely going to try the Upol lineup.
@@paintucation copied from first video: @perryj20 2 months ago Kevin; Thanks for this video. It answered many questions I had regarding using Rustoleum paint for automotive use. I think the main point of the video was made near the end when you mentioned it's inherent lack of robustness to UV and gasoline. So naturally I was wondering if it was an acceptable process to apply a 2K urethane based clear over the dried Rustoleum; If that product was compatible with Rustoleum then you would have a paint job which would be durable w.r.t UV and other chemical solvents. I expect the answer is that it won't bond well but many are claiming to have success with this approach (even in the comments here). Your thoughts? Thanks again!
one panel at a time on a low stakes vehicle must be a great way to learn. my only paint experience so far is a small repair on a metallic silver Lincoln Town Car. I used the Duplicolor system that is the color matched paint, primer, and clear. it turned out ok, definitely was not in a prime area for blending so is noticable if you are looking, but doesn't catch the eye in the parking lot. Excited for the next time I do a paint thing after picking up so many bits of knowledge I can apply. Thanks!
Really enjoying your content today's video was very helpful. A lot of really cool tips for using a rattle can including the finger tip. I was wondered for those drips came from this will help everything I ever spray paint. Thank you.
Awesome video. Awesome channel. I’ve already learned a whole bunch, and I appreciate that. It’ll help me with my own projects. Keep up the great content.
Fan-friggin'-tastic, mate! Like you, I could use a plethora of what my kids used to call "Daddy Words" to describe the result, but the proof is sitting there looking right at me and really needs no further embellishment than that.... ....except for maybe the word "WOW" in about 144pt with a dozen exclamation marks! I thought the tank came out well, but as you say, it's now showing its limitations. Looks like it's one of those things you either get right in the application and then let it harden up to look its best, or you miss out and with the knowledge that any form of correction will mean you need to add a finisher every few weeks. The second system looks to be the way to go - and that's great, because I have a car that I need to repair a couple of small panels on and would rather not spend umpty-thousand dollars on the gear, the PPE and the paint etc to do them. Even how it finished up before you sanded and polished the guard looked pretty damn good and to me, would have been good enough.....but wow! Now it will be interesting to see how they keep their gloss over time. Many thanks for showing us this product and how it can be used. It's been an eye-opener for sure! One quick thought - I have another vehicle where the clear coat has left the entire panel and the colour is all that remains. Have you ever tried just prepping that sort of panel and re-clearing it without respraying the colour as well? Because I started thinking that maybe even with a couple of cans of that 'clear coat in a can' it might look better than it does....but I'd hate to make the car look worse! All the best
Nice finish on fender, looks like Ford blue. Liked the tips on finger location & repairing drip. You are exacting on the times, before you go to next stage. Good info.
So funny Kevin. One plus to a PPE full bunny suit is that it keeps YOU off the paint surface, you know hair and other body schmutz. Thanks for the great info, Kevin.
You can 100% spray, spray max 2k clear over rustoleum. Painted a whole truck with it. It sands and buffs out great too. Painted my truck 6 months ago and no issues. Looks as wet as the day I sprayed it
@@paintucation I've been a fan of yours since you were on trucks. I watched you every weekend with my daughter back then. Thank you for being a part of something that I bonded with her over. I'm subscribed to the channel. I wish you success.
Thanks for spray bomb education. That product turned out great with your expert installation. thanks for sharing, I really enjoy watching your videos. learned alot with this one Thanks
Great video! The over the counter spray cans are getting so much better. As for shaking the can, your sawsall shaker does work, check out Puddin's fab shop on using it.
They do make a can holder for shaking paint on the old salz-all. Also seen them for cordless drill. I have been using the Upol primer for several years now and it is my go to for rattle cans and the nozzles are pretty good, very similar to the ones on the Clearmax products. The Clearmax 2K cans are awesome by the way, they lay down and absolutely gorgeous coat with little orange peel. I know the PPE is needed but I just use a 3M respirator in a well ventilated area. The Autozones around me do not carry the professional cans of color or clear at all, just primers.
My Truck is ugly but im still scared to death to knock down the clearcoat. Long time Fan love finding you again through VGG I Woke up Every weekend to Watch TNN and all the shows IM Not a Morning Person But We Didnt have DVR"s
I don't have anything metal needing paint... but I wanna go find something metal just to do this. That blue was gorgeous... from a pair of rattle cans!
It makes sense that companies started putting adjustable nozzles on their cans. It's a lot easier to control when you get a nice pattern. I really like that color of blue. BTW, you have to be a genuine Okie for the paint can shaker saw to work correctly LOL... Just curious, what does "holy snappin bungholes" mean ? I caught that when you were looking at the fender after you buffed it.. 🤔
I just looked again at the fender.... it still looks amazing!!! I'm actually blown away with how nice the (1k) clear looks....
So awesome.. how about blending panels with aerosol paint and clear? That would be very helpful right now.
Several years ago, I had bought one of these old service station island oil racks. I did the same rustoleum paint jobs on it, and got the same results. after a week or so,it has dulled out. I then went and scuffed it down I think with 1000 grit, and used rustoleum clear on it, and got a nice shine that lasted. My issues was more with my prep. After a year I started getting bubble from under the paint.
It appears that product you used on the fender dried harder than say rustoleum or other rattle can paints? I have a older car which I am planning on painting in a year or two. But I recently had a shop do some engine work on for me, and they used that sticky clear plastic fender cover on. they stuck it on the inner fender they left it on for for like 3 weeks when they pulled it off it took the paint on the inner fender off. Is this UPOL system something I can use to to mask off this area of and do a spot repair?
Rattle canning vehicles should be illegal. Got a 83 f150 to clean up that someone rattle canned. Grow up its not a BMX petal bike.
@paintucation could you link the cleaner, shop towels, and all the equipment you use in this video? I want to begin tackling some automotive painting in my garage.
@@NorthO-i9c It is just paint, there is a difference in someone wanting yo just spray painting, and some one doing the job correctly. I have seen quite a few rattle can paint jobs that looked good.
Ive said it many times. Kevin is a phenomenal teacher and has no problems showing mistakes, alternate ways to do things, or telling you when he finds another avenue that may be benefical to you.
This is what makes him different as a teacher AND more importantly......a person. With him helping on these videos, staying in the comments here and on his social media, just inagine what you're missing with his actual training through Paintucation.
Check it out folks.
You're awesome. That is all.
About 4 years ago I did a rattle can paint job on an old Honda. Everyone is familiar with with 90s Hondas peeling clear coat. We used Aircraft paint remover and carefully removed all the paint. Used a rattle can of light grey primer, 6 pack of red sunrise rattle cans, waited 2 weeks and keyed the paint with 400 grit. Used 2K clear rattle can over the top. Brother, it was perfect... This many years later it still looks like new.
Boo-boo’s are the best way to learn. Thanks for showing how to fix. Nice job.
So glad to have just found Kevin on RUclips. It was a Paintucation DVD I bought probably 20 years ago started me off painting, I’ve lost count on how many paint jobs I’ve now done. A big thanks Kevin from the UK and look forward to watching your videos 👍
That is amazing! Thank you so much for sharing this with me, that warms up my heart and makes me want to keep on pushing. :-) seriously, thank you for sharing this!
The wife's T-Bird was the absolute clincher for me. I have a few minor scratches in my wife's and I believe it might be the same color ! I've been dreading a full on pro-paint for the scratches but they do drive me nuts. I see a trip to Auto Zone in my future before winter sets in, Thanks so much for pursuing this series on rattle cans, "You the Boss"
AutoZone is phasing this product in.... check locally first... my understanding is that they'll soon be in ALL STORES... Good luck!! KT
I watched you paint the motorcycle tank and, in that video, you made the comment, "I don't know why I'm talking so much". I retired from the floor coverings installation trade and, in the course of my career, trained several installers. The constant talking, as you're working, is a very good teaching tool. As your students are watching you work, they are hearing what they are seeing, making understanding much easier. I'm in the final stages of restoring a 1981 Corvette and will soon begin the paint process. I've been surfing U-Tube videos for someone who explains the paint process in a language I can understand and finally found that with your videos. I've never painted a car before, but am confident I'll get the idea from your videos. Thank you for the detailed explanations.
Thanks!!! I'll certainly do some paint projects here on RUclips, but I have several instructional videos available that show detailed paint training. Let me know how I can help!!
Absolutely stunning results from a rattle can. Amazed at how nice that stuff cleans up!
I noticed you used a small screwdriver with the pad for the crevices …I was waiting for it to poke through and scratch the painted surface 😬. My thought was a wood dowel. You can grind the point to fit and have much less risk of creating more work by scratching the surface you are painting. Just sharing my thoughts…I love your content and the fact that you explain processes thoroughly 😁
Thanks! I have some plastic windshield tools as well, they're rounded on the end, they work well. Wooden dowels would be a good tool!
Ive watched countless of these exact videos. This is #1 for me. Thank You
"I'm going to be using the same exact type of stand..." These are the jokes/attitude some of us are here for, and why Kevin gets along with Derek so well. Professionalism isn't found in the products, people. It's found in the people.
Sometimes I can't help myself. We gotta laugh sometimes! especially these days!
I literally watch both part 1 and 2. No skipping or fast forwarding. I enjoy the chat while working because that's when useful tips often come. I like that you made mistakes, explained them and showed how to fix them. I've definitely learned a lot and look forward to trying this out and seeing more videos.
Glad you enjoy it!
Upol is the king of coatings, they have an entire line of diy products that actually last. They are far superior than Rust-Oleum and duplicolor, I've been using upol for almost everything and can't beat the quality sure that brand is a bit pricey but man is it worth it lol. Great job Kevin 👍🏼
Those are some amazing results!!! I have to give you kudos for not editing out the dreaded paint glove drip. It truly shows that hiccup’s like those happen even to the pros. It gives us wanna be’s the will to push on and work through it. Thank you for the Great Vids Kevin and keep them coming….
Your videos are very inspiring. You do a great job teaching and please keep the content coming.
I need to try this paint on a model kit
Turned out fantastic
I'm been in the automotive repair business for 45 years I've seen some of the hacks for the spray can paint shaking next time try using two hose clamps it works better. Be safe and keep on doing what you do.
Great tutorial video!
Here’s another tip, keep a paper towel in your back pocket, and every so often wipe the spray can nozzle. They have a tendency to build up blobs that can end up dripping into the finish coat.
To say that I'm impressed would be an understatement. WOW!
That finish is amazing. That's perfect for a DIY job on a motorcycle or a 4-wheeler. Hell, if you can get these cans with a variety paint codes, you can blend panels for rust repair/replacement/repair. Very cool. Paint technology has come a long way.
Same process I used in the 80’s and 90’s on GM lacquer paint spot blending. I had great results!
Awesome!! thanks 👍
Can't stop watching all your shows, I've been binge-watching for hours 👋
I use Upol a lot and am very happy with it in certain circumstances, kind of like what you are doing in this video. I've had the same issue with my fingertip interfering with the spray. I stopped wearing a glove 🙂. I learned a lot watching this video. Thanks very much!
Thanks for watching! I'm learning too! No matter how many times I spray, there's always something that comes up. :)
@@paintucation That’s for sure. I’m going to use your masking tape trick in drips and runs. Thanks for that tip 👍
It’s good he keeps making common mistakes, it shows what to avoid and how to come back from it.
Kevin, I just like watching your videos. You’re an amazing talent & teacher. I have painted A LOT of stuff over the years. Both with a paint gun & with rattle cans. Nothing professional. Just raised kids that liked to wreck cars etc. Yet I’m always willing to learn & I like how you educate but don’t talk down. I wish for your channel to take off & grow beyond your own imagination. I feel like when I’m watching you, that we could do a class & drink a beer after while we wait on paint to dry. Keep it up. I’ll spread the word.
Hack? no lets not call it a hack. Everyone seems to over used that word for anything that makes things easier or gets a job done. Tip or trick should be the right word. Thanks for all you do Kevin.
Man i love your channel, used to watch you on TV , miss those shows , now i can see these great tutorials, god bless.
Glad you like them!
I learned a lot watching this. Thank you. This is going to help me immensely.
Watched this and the tank too, I might be discovering that I have an inner painter emerging! Have to thank you for these videos as they have really helped me finish a piece of furniture that must go out the door like now and the paint was a really cause for pause, this essentially got me through. Now I want to learn the art , cheers
I always learn watching these videos. Thank you Kevin
this was great. I honestly didn't know 2K was a catalyst clear coat, so that does help to know!
Love this, I did my doors on my can am x3 max doors, thank you. All I need is for it to last till I roll it again :)
Its so refreshing to see a professional who's not an absolutist, its annoying to see guys die on swords just because they dont have the skill or experience. Well done brother!
So awesome and will be applying what I've learned here, thank you!!
The excitement you get talking about the two stage breakdown is amazing. Passion makes for a great teacher. Loved watching you even back in the Trucks days.
Awesome! Technique is king. Kevin ... you rock!
Great content I'm so glad you have this channel so we can all learn with you
Wife backed into a friends car, hit right in the fender. I was able to use the color match camera at O'Reilly auto for a perfect paint match and then the 2k aerosol clear on it. Turned out amazing, I will freely admit I am a paint rookie, I have only used a spray gun one time in my whole life. I can completely vouch for what Kevin is saying here. You can get an amazing finish on small areas using spray cans. Nice work Kevin, thanks for all of the great content!
Sometimes expletive potty mouth words are the best descriptions. I really enjoyed this and learned from a mistake I've made several times. I will now always clean up my over spray !
You are an amazing teacher. Thanks for sharing you knowledge about things you know
I appreciate that!
I have had very good luck with upol products in the past and I love them. They have terrific products in my opinion. So glad you did this video. You are a fantastic painter and an amazing teacher. I still enjoy watching your paintucation videos. Still picking up things each time I watch them.
That came out much better then I ever expected!
Me too!
Going to try this rattle can method on the motor cover of my outboard motor. Paint faded from the sun. Still will use the 2k clear but you got me motivated with this method. Never did it but want to try it. Still cannot wait until you start working on Ziablo! Thanks again for another great video Kevin!
Thanks! I have done a lot of rattle can detailing on daily drivers. Love that you followed up. Hope to see more small do it at home projects like this as you come across new products and techniques.
This video came at a perfect time for a project I am working on. Thank you so much for laying out the steps. Yes its a lot of work and many steps, but it does work and you proved it out for us. Thanks.
You're such a goofball. But I love your technical information and guidance. Looking forward to fighting against the "patina" paint work out there.
Patina paint in most situations means neglected.
It just goes to show everyone that you can get great results with the right preparation, tools and techniques. Looks fantastic. Have a small rust spot on my driver side rear wheel opening near the top. Have watched your videos for a long time, but just wondering how to repair it properly. Have all the supplies to get started. Going to use 2 stage system. Your input would be greatly appreciated. Say hi to Derek next time you see him. Great job 👍🏻👍🏻👍🏻
Wow, that looks great, Kevin Upol, who would have known outta of a spray can, could look so good. Thank you for sharing this
This is a fantastic series. So cool to see how each step up in DIY level, compares. Next up, 2k rattle cans? I know you said that was a diferent PPE setup, would be nice to see DIY versions of that too!
Can't imagine how much over spray that fuel tank has now. Good job, fender came out really nice.
I'm into high power rocketry and I've painted rockets with both automotive type paints (2 stage) and rattle cans. The rattle cans give a decent finish and like the tank you did, too many coats causes them to crackle. With rattle cans I found if I need more than 1 coat I let it off gas for a week or two, sand it down smooth and hit it with another coat. Most times I will not have an issue with cracking or delaminating paint. I have sprayed out a rocket with rattle can paint and followed it up with an automotive clear with decent results. I do get delamination of the clear if I don't allow everything to cure for about a month (our launches are 1 a month in good weather). The last rocket I sprayed with rattle can paint and automotive clear delaminated on the 2nd launch but on the first launch the nosecone hit the body tube and scuffed the paint and clear. The clear peeled off on the second flight. Painting with rattle cans is always a crapshoot but with 2 stage I always get really good results. I'm definitely going to try the Upol lineup.
Thanks! You answered my question from the first video with this one.
What was the question?
@@paintucation copied from first video:
@perryj20
2 months ago
Kevin; Thanks for this video. It answered many questions I had regarding using Rustoleum paint for automotive use. I think the main point of the video was made near the end when you mentioned it's inherent lack of robustness to UV and gasoline. So naturally I was wondering if it was an acceptable process to apply a 2K urethane based clear over the dried Rustoleum; If that product was compatible with Rustoleum then you would have a paint job which would be durable w.r.t UV and other chemical solvents. I expect the answer is that it won't bond well but many are claiming to have success with this approach (even in the comments here). Your thoughts? Thanks again!
I'm sold!
I’m a better petter painter and have started a pretty good reputation around my town thanks to Kevin!
That's awesome!!! 👍
This is awesome! What a wealth of information for us rattlecan weekend warriors!
one panel at a time on a low stakes vehicle must be a great way to learn.
my only paint experience so far is a small repair on a metallic silver Lincoln Town Car. I used the Duplicolor system that is the color matched paint, primer, and clear.
it turned out ok, definitely was not in a prime area for blending so is noticable if you are looking, but doesn't catch the eye in the parking lot.
Excited for the next time I do a paint thing after picking up so many bits of knowledge I can apply. Thanks!
This was great! Thanks for trying the Upol products, ive been curious. Love the channel!
Really loved the video and I think this would be a great way to do an engine bay. At least for a amateur like my self
Glad it was helpful!
Loved this, I’ve always wondered if this was possible, I’ve done similar with furniture with pretty good results, but this looks great, Thanks
Really enjoying your content today's video was very helpful. A lot of really cool tips for using a rattle can including the finger tip. I was wondered for those drips came from this will help everything I ever spray paint. Thank you.
Glad it was helpful!
Superb result and an entertaining and educational video too.
LOL. Funny education. You are very good and the result are amazing. 👏👍😆🇸🇪
Awesome video. Awesome channel. I’ve already learned a whole bunch, and I appreciate that. It’ll help me with my own projects. Keep up the great content.
I love using rattle cans for guitars they are cool looking and wont see the outdoors much so its a great option for that
That clear looks good! I was trying to decide between Dupli color clear or upol but this looks way better than Dupli color others review on RUclips
Fan-friggin'-tastic, mate! Like you, I could use a plethora of what my kids used to call "Daddy Words" to describe the result, but the proof is sitting there looking right at me and really needs no further embellishment than that....
....except for maybe the word "WOW" in about 144pt with a dozen exclamation marks!
I thought the tank came out well, but as you say, it's now showing its limitations. Looks like it's one of those things you either get right in the application and then let it harden up to look its best, or you miss out and with the knowledge that any form of correction will mean you need to add a finisher every few weeks.
The second system looks to be the way to go - and that's great, because I have a car that I need to repair a couple of small panels on and would rather not spend umpty-thousand dollars on the gear, the PPE and the paint etc to do them. Even how it finished up before you sanded and polished the guard looked pretty damn good and to me, would have been good enough.....but wow! Now it will be interesting to see how they keep their gloss over time.
Many thanks for showing us this product and how it can be used. It's been an eye-opener for sure!
One quick thought - I have another vehicle where the clear coat has left the entire panel and the colour is all that remains. Have you ever tried just prepping that sort of panel and re-clearing it without respraying the colour as well? Because I started thinking that maybe even with a couple of cans of that 'clear coat in a can' it might look better than it does....but I'd hate to make the car look worse!
All the best
This is the first RUclips video where I've learned how to finger. Neat
Nice finish on fender, looks like Ford blue. Liked the tips on finger location & repairing drip. You are exacting on the times, before you go to next stage. Good info.
Flash time is pretty important..... Thanks for watching!
I would have stopped with the first try..... outstanding job!!!😅
So funny Kevin. One plus to a PPE full bunny suit is that it keeps YOU off the paint surface, you know hair and other body schmutz. Thanks for the great info, Kevin.
Thank you for this wonderful information
You can 100% spray, spray max 2k clear over rustoleum. Painted a whole truck with it. It sands and buffs out great too. Painted my truck 6 months ago and no issues. Looks as wet as the day I sprayed it
Yup,. I wanted to show a 1K alternative. 😊
@@paintucation I've been a fan of yours since you were on trucks. I watched you every weekend with my daughter back then. Thank you for being a part of something that I bonded with her over. I'm subscribed to the channel. I wish you success.
How many cans needed to do your truck?
@@sputnik4216 I have no idea.... I would never spray a whole truck with cans.
The rattle can paints and rattle can clear coats have definitely stepped up in quality in the last couple of years.
Thanks for spray bomb education. That product turned out great with your expert installation. thanks for sharing, I really enjoy watching your videos. learned alot with this one Thanks
You have the same alarm ringer i do and i keep thinking i have an alarm going off 😂
Yeah, I think the steaks need to be flipped when I watch this video back! LOL!
Thanks for the excellent instructions!!!
Great video! The over the counter spray cans are getting so much better. As for shaking the can, your sawsall shaker does work, check out Puddin's fab shop on using it.
👌 wow,I think I would go back to the store and get more products and match all the tins😊
If I actually had the rest of the bike I definitely would. I just got the tins.
Very entertaining! I need to paint the roof rack on a 1994 Land Cruiser….any suggestions on which paint to use?
They do make a can holder for shaking paint on the old salz-all. Also seen them for cordless drill. I have been using the Upol primer for several years now and it is my go to for rattle cans and the nozzles are pretty good, very similar to the ones on the Clearmax products. The Clearmax 2K cans are awesome by the way, they lay down and absolutely gorgeous coat with little orange peel. I know the PPE is needed but I just use a 3M respirator in a well ventilated area. The Autozones around me do not carry the professional cans of color or clear at all, just primers.
Looks good. Love the color
Amazing! Thanks for the video!
Good trick with the wax and grease remover wet sanding
Another banger video from Kevin!
Appreciate it!
The look on ur face is priceless!
Another great 1K product, if your near an ACE hardware, the store brand paint is actually pretty good, just make sure you prep accordingly.
Prep is king!!! 👑
My Truck is ugly but im still scared to death to knock down the clearcoat. Long time Fan love finding you again through VGG I Woke up Every weekend to Watch TNN and all the shows IM Not a Morning Person But We Didnt have DVR"s
Kevin was in a WEIRD mood in this video, but I learned some stuff. Thanks!
I make no apologies! Lol! I'm just weird.😁
"Holy Snappin' bungholes" Solid.
nice...thx Kevin
You looked so impressed with the two minutes of shaking....... isn't that what camera guy is for?? LOL.
REALLY impressive - especially and on top? Out of a rattle can. Just shows you how paint technology advanced.
I don't have anything metal needing paint... but I wanna go find something metal just to do this. That blue was gorgeous... from a pair of rattle cans!
Great video bud thanks for your time
Really good show Kev, but I miss the egg timer, A fellow painter In UK.
Put the rattle can in a bowl of warm water prior to spaying to raise the pressure in the can to smooth out the fan.
Looks great man 👍
That was a great and informative video. Thank you sir!
You just changed Derek’s (vgg) life forever 🤣🤣
😂
By the way Derek has an ugly road bike. No hint for an episode 😎👍🏼
It makes sense that companies started putting adjustable nozzles on their cans. It's a lot easier to control
when you get a nice pattern. I really like that color of blue.
BTW, you have to be a genuine Okie for the paint can shaker saw to work correctly LOL...
Just curious, what does "holy snappin bungholes" mean ? I caught that when you were looking at the fender
after you buffed it.. 🤔