Thank you so much for doing this. I was almost about to buy a used Zeus for 6500 when someone told me about the Topdon. Never heard of it before. Amazing to get everything you do for 3800 with a scope!
A lot of people hate on snap-on, especially the scanner. I own all 3 brands, same top don the ultra from autel and the snap on verus edge. The verus edge is my go to. It's easier to navigate understand pids the scope is my second favorite other then the pico. On top of that built in to the tool you have trouble shooter and component test. Yes I can look it up but it takes more time.
Great review! Snapy has been pushing an upgrade of my "obsolete" Modis Ultra. The Snap-On Zeus Plus, with trade-in of my Modis Ultra ($2000) and $1600 instant rebate, is $9k. Unfortunately, this is still a bit rich for my blood -especially with Snap-On's interest rate. It does start way faster than the older Zeus. Matco has let me test drive their Maximus 4.0 (Launch) for a few weeks. It has some quirks, is rather big and bulky, but is easy to use. "If" I went with something the size of the Launch or TopDon, I'd just get a laptop carry case.
I just replaced two of my shop scanners with topdon scanners. So majority of the scanners in my shop are now topdon besides my dedicated scanner I use for indepth programming for coding, deleting dpf, egr and addblue etc. Bang for the buck the topdon is probably the best scanner on the market. For majority of what most shops are going to use the scanner for, the topdon is going to take care of all your needs.
I'm 90% retired after 40+ years in the trade. Unless you specialize in just one make and use a factory scan tool with current updates and a subscription to down load updates, it's impossible to own just one scan tool. I own three different scan tools; SO Solus Ultra (now considered "vintage", a no name "pro consumer" level tool and, yes, a Vintage OTC Genisys with updates to 2013. Each scan tool has its good/bad points; believe it or not, the Genisys can connect with older vehicle (prior to 2000) which other units have trouble with. The costs of equipment today is going up faster than the government CPI, which is another reason I chose to retire (more or less). The costs of continuous updates runs from 350 to 1200 USD yearly for each scan tool not to mention that in many cases a scan tool becomes obsolete between 5 - 8 years. SO is imho, a great tool for US makes + Toyota & Honda, weak everywhere else. So, you need another scan tool for the Asian makes and/or European stuff. My question to you is, why not purchase a Pico 4 channel scope rather than use the SO unit?
True but a $800 scanner today can do what alot of $2500 scanners 15 years ago could do. Back in 2015 I got the original x431 and it was $800,the $800 x431 today makes it seem like a antique $100 scanner. The big difference is the bi directional functions
i purchased a Topdon Phoenix Plus (the $800 model) and am extremely happy with it. I probably does 85% to 90% of the functions of the Phoenix Elite, enough for this home mechanic. I am pretty impressed with it. A Topdon Max is pretty nice but overkill in my situation...
I own a repair shop I have a snapon tritan d10 it was around 5500 bucks its not a bad scanner and the guided tests is nice because you can scope a sensor super fast and it tells you specs and where to backprobe the sensors so you dont need tojump on ur service manual. However what is SUPER frusterating is when I have a car with a misfire like this infinity recently and the snap on scanner has no misfire data but I grab my AUTEL TPMS Tablet I paid like 500 bucks for and it has misfire data. I have had a few cars that the snapon didnt have bi-directional control of something or didnt have a test but my autel tpms tablet did. Were talking about aftermarket scanners ur never gonna get everything I get that I just dont like how expensive snap on is and having to pull out a 500 buck tablet to check a misfire on a car like an infinity that it should do
Not sure why but on the Snapon scanners the misfire data on Nissan/Infiniti is not on the Scanner function but on the Generic OBD2 function under the Mode 06$ Tests. Had an issue like that on a Versa and found the info there.
It’s in special function or active test somewhere I know it’s weird but it is there. Cheap tool shows you because misfire data itself, it is part of OBD protocol
As for the dongle, the Snappy is Bluetooth and the Topdon WiFi/BT. The Topdon J3425 had more capabilities being a J3425 device and transmits data to the scan tool via WiFi much faster. Bluetooth is a big negative regardless of size having a slower transmission rate. Same as the Throttle 3, communicates with the scan tool via WiFi.
My old Solus Edge is pretty fast, but it doesn't have all the bells and whistles as the Zeus. It really depends on the car, some cars my snappy seems to talk better with than my topdon and vice versa
There is no way I could work on modern cars. I just changed the spark plugs in my 2018 Outback and while the hardest part was a stuck bolt on the battery tray, I made the decision that as soon as I don’t need a reliable car to get me tj work and back I’m buying a 67 Chevy pickup and I’m never going to have to shove my hands down in an engine and cut them all up ever again. All the electronic components I simply don’t need. No scan tool needed for a 67 Chevy. 😂
Depends on the level of depth you need to go into just want to read and clear codes those are fine full on systems diag on something beyond the check engine light or a tricky check engine light you might need something more extensive.
I really enjoyed your breakdown of both tools. One thing I would like to see is the data graphing of the topdon compared to snap on. I feel like this is another area that snap on shines at particularly when you combine it with shop stream connect. Could you do a follow up video comparing these features of both tools?
@@isorozco511 ?? I love my Pico but if you want to graph multiple pids on a test drive the first tool you should be using is your scanner. Then you dig deeper with the scope afterwards.
I buy the next model down snap on at discount used once they stop supporting ie my og verus gets me to 2017. usually not working on any thing newer have all the keys from previous and ill by the top don in case i run into something newer the trouble shooter and component test is awesome a lot of people dont want to admit it though cant wait for verus edge no keys !
Hello,once i trye to scan Mercedes s500 2020-2023 ,and Ople vivaro dont remember witch year its was,but In Opel it show first dpf oxygen sensor but in real life it was second one,than i work with Mercedes and i show same falt code for another falt,after this i will never spend so mutch money for snap on,never use topdon(loks like lauch pad 7)and price more interesting for it,sorry for mistakes my english not super well
Xtool A30M....bidirectional scanner for under $200 that does basically everything these two do......free updates for life. I am a Snap On addict but after the last S.O. scanner I had stopped working I tried the XTool A30M and it does more than the 10 times more expensive Snap On scanner. I got a Samsung tablet for the A30M and I'm not looking back. So happy I didn't waste 10k.
These are professional level tools for everyday use by people using them to make their living. There are less expensive tools available for occasional use.
So i would like to see a video on comparing the Phoenix max vs the elite. I dont see much of a reason getting the max and not just save the money and get the elite
TopDon just told me I can use the phoenix scope with any phoenix series scanners even the $600ish lite 2. I emailed asking because of the scope. I was gonna get autel for scope but I’m getting a top Don. I am leaning towards the phoenix smart or the remote, but after watching this idk I definitely like topdon!
Even if the cpu,memory and storage were identical the difference in operating systems android vs windows hopefully windows ce configured to be efficient still android is optimized and designed for mobile devices so windows is going take longer. Also I may have missed but release date is important to fairly judge each scan tool but the processing power required for windows is higher so newer hardware with more efficient OS equals faster
I have, todon , Autel , and Snap on ,but I have the snap on triton 10 and I have tried the snap on zeus and for me its 2x better than the triton 10 than the zeus the triton 10 has better prices and is faster than the zeus I recommend to buy the triton 10 than the zeus.
I use the max daily in my shop along with the scope. But it's a shop tool I'm looking to invest in my own. Not sure if autel or top don or zues will serve my needs best
My coworker has the autel ultra and a really good feature with it is when you update it every year (I think it's about 1k) the updates also act as a warranty on the device and they will fix any issues you have with it
Hey bud I am a mechanic I am SERIOUSLY going to buy one of these for the shop quick question is it " bidirectional"? Please 🙏 someone let me know ....love ur videos !
@@MrSubaru1387 oh my God Mr Subaru answered my actual question the guys at the shop will never believe this man thank you so much long time follower keep up the good work your master at your craft sir!
The Phoenix Max is like the Smart but bigger. These Chinese tools can do a lot of things for the money, best bang for your buck compare to snapon. Problem is the Chinese do not test their tools long enough before they release them. They rely on the consumers to use them and then report problems so that they can work on a fix. Basically, make your paying customer your beta tester. These tools are extremely buggy compared to snapon, but I would never pay the inflated prices of snapon. The cumbersome brick that connects to the car is also advertised as a j2534 interface for programming but it doesn't work. Some functions make no sense or are non existent. Try history function and find out that it doesn't let you get access to a vehicle like any other scanner on the market. The history shows you data history but no real access to the vehicle. So if you have to work on the same vehicle multiple times, you have to scan for the vin every single time. That's not efficient. All these types of review flatter the tool and push viewers into spending their money for a tool that's not ready. This tool came out a year or 2 too early. With time it will become a great tool as the hardware seems strong. I remember Autel were like this in the beginning but now are one of the top scan tools on the market. I'd like to see you make another video in a couple of months and tells us how the tool is doing.
This is very true. I have a Topdon Phoenix Elite and it has been less than a year and certain functions are spotty. I was able to program blind spot modules on fords one day and the next the function constantly failed. My secure gateway access I pay autoauth for was working and now fails and says my tool is not registered to my autoauth account which it is. Had to do some digging and found that Topdon fell out of compliance with auto manufacturers and thus a lot of functions that are security locked by the manufacturer stopped working. They are currently still not in compliance and it has been months. Luckily I also have a Snap-on scanner. Don't get me wrong. I really like the Topdon and it does things my Snap-on fails at but it is very frustrating to have functions you need that worked yesterday stop working all of a sudden.
Does anyone know if the Topdon Phoenix Elite does the electronic parking brake on 2015+ Subaru’s? And how much bi-directional testing does the elite do vs the max? Asking because I’m tired of paying for someone else to do the work when I’m capable, but don’t have the “scan tool” that has that functionality.
Great video.. the Topdon does programming and coding I don’t think you made a fair assessment of that tool I owned the Phoenix plus and I have to tell you it has done many things that my triton has not been able to be even close like security and bidirectional features… specially on Subarus… you can also clone GM modules with their optional ninja box if I were Snapon I’d watch out with their overpriced products and always falling short with their products… I can’t wait to get me a phoenix Max and cancel my subscription with Snapon is just too damn expensive.
Jeesh. I bought a 2005 legacy gt, ej255, timing kit, turbo, and intercooler for less than those scanners. Lol. Granted if your a tech for living I understand owning it.
Snap on it’s not good anymore 😢😢😢 very expensive and it doesn't do much The program is bad, it freezes all the time when I use it 😢 everybody what’s going on?
I like xtool. Best bang for buck. I have there A30M, most powerful entry level scanner with bidirectional controls. I just love it. When i have the money I'll get there D9 pro. Topdon max is great. I would love to have that in some other lifetime 😂. But trust me folks xtool is where it's at.
@@iam1smiley1 The Xtool D9s pro is the latest version. There is no Launch that comes close to the D9s at the moment. They still have to catch up with Xtool. The x431 pro is a bit better than the old D9 but price to performance and features the xtool always comes up tops. I have a friend that has the D9s. I played with it a few times. It's really nice. But I'd go for the d9 because it'll be cheaper now.
do you get any english speaking support with the topdon when you have problems or are you on your own once they get your money??? Maybe you can call China 😂😂😂
It’s obvious TOPDON paid you ,,,, how much can you say it’s faster ? Once would do it Not a great comparison, want to know which one is better for solving problems ! Snap-on trouble shooter is HUGE but you barely mention that ,,,, Would love a good comparison by some one
![Felix "Unfair" | [Stray Kids : SKZ-PLAYER]](http://i.ytimg.com/vi/Oswujxm2Ag0/mqdefault.jpg)
Thank you so much for doing this. I was almost about to buy a used Zeus for 6500 when someone told me about the Topdon. Never heard of it before. Amazing to get everything you do for 3800 with a scope!
good point on the information of how the snapon tool can walk you thru most diangnosis of your sensors on vehicles.
A lot of people hate on snap-on, especially the scanner. I own all 3 brands, same top don the ultra from autel and the snap on verus edge. The verus edge is my go to. It's easier to navigate understand pids the scope is my second favorite other then the pico. On top of that built in to the tool you have trouble shooter and component test. Yes I can look it up but it takes more time.
Well damn,topdon wants to make their next scanner on a 42 inch flat screen.
Yes 😂
We're in 2024, 60+ inch or nothing
I have been looking and for the price you can't beat topdon. Thanks man 👍
Great review! Snapy has been pushing an upgrade of my "obsolete" Modis Ultra. The Snap-On Zeus Plus, with trade-in of my Modis Ultra ($2000) and $1600 instant rebate, is $9k. Unfortunately, this is still a bit rich for my blood -especially with Snap-On's interest rate. It does start way faster than the older Zeus. Matco has let me test drive their Maximus 4.0 (Launch) for a few weeks. It has some quirks, is rather big and bulky, but is easy to use. "If" I went with something the size of the Launch or TopDon, I'd just get a laptop carry case.
I just replaced two of my shop scanners with topdon scanners. So majority of the scanners in my shop are now topdon besides my dedicated scanner I use for indepth programming for coding, deleting dpf, egr and addblue etc. Bang for the buck the topdon is probably the best scanner on the market. For majority of what most shops are going to use the scanner for, the topdon is going to take care of all your needs.
What scanner do you use to delete erg adblue ?
I'm 90% retired after 40+ years in the trade. Unless you specialize in just one make and use a factory scan tool with current updates and a subscription to down load updates, it's impossible to own just one scan tool.
I own three different scan tools; SO Solus Ultra (now considered "vintage", a no name "pro consumer" level tool and, yes, a Vintage OTC Genisys with updates to 2013.
Each scan tool has its good/bad points; believe it or not, the Genisys can connect with older vehicle (prior to 2000) which other units have trouble with.
The costs of equipment today is going up faster than the government CPI, which is another reason I chose to retire (more or less). The costs of continuous updates runs from 350 to 1200 USD yearly for each scan tool not to mention that in many cases a scan tool becomes obsolete between 5 - 8 years.
SO is imho, a great tool for US makes + Toyota & Honda, weak everywhere else. So, you need another scan tool for the Asian makes and/or European stuff.
My question to you is, why not purchase a Pico 4 channel scope rather than use the SO unit?
True but a $800 scanner today can do what alot of $2500 scanners 15 years ago could do.
Back in 2015 I got the original x431 and it was $800,the $800 x431 today makes it seem like a antique $100 scanner.
The big difference is the bi directional functions
Topdon and matco and other scanners have or are provided their software is from launch 🚀
i purchased a Topdon Phoenix Plus (the $800 model) and am extremely happy with it. I probably does 85% to 90% of the functions of the Phoenix Elite, enough for this home mechanic. I am pretty impressed with it. A Topdon Max is pretty nice but overkill in my situation...
Will it do keys/ignition switch for ford focus by chance?
Your scan tool cost more than my Subaru 😮😮
Just change the head gasket 😮
I own a repair shop I have a snapon tritan d10 it was around 5500 bucks its not a bad scanner and the guided tests is nice because you can scope a sensor super fast and it tells you specs and where to backprobe the sensors so you dont need tojump on ur service manual. However what is SUPER frusterating is when I have a car with a misfire like this infinity recently and the snap on scanner has no misfire data but I grab my AUTEL TPMS Tablet I paid like 500 bucks for and it has misfire data. I have had a few cars that the snapon didnt have bi-directional control of something or didnt have a test but my autel tpms tablet did. Were talking about aftermarket scanners ur never gonna get everything I get that I just dont like how expensive snap on is and having to pull out a 500 buck tablet to check a misfire on a car like an infinity that it should do
Not sure why but on the Snapon scanners the misfire data on Nissan/Infiniti is not on the Scanner function but on the Generic OBD2 function under the Mode 06$ Tests. Had an issue like that on a Versa and found the info there.
It’s in special function or active test somewhere I know it’s weird but it is there. Cheap tool shows you because misfire data itself, it is part of OBD protocol
What model autel?
Ahh yes I’m watching gadgets that I can never afford
That is amazing after spending $10,000 they insult you by charging another $450 for the dock. Brilliant.
As for the dongle, the Snappy is Bluetooth and the Topdon WiFi/BT. The Topdon J3425 had more capabilities being a J3425 device and transmits data to the scan tool via WiFi much faster. Bluetooth is a big negative regardless of size having a slower transmission rate. Same as the Throttle 3, communicates with the scan tool via WiFi.
Wow ! Super helpful !! Extraordinary detail !!!
My old Solus Edge is pretty fast, but it doesn't have all the bells and whistles as the Zeus. It really depends on the car, some cars my snappy seems to talk better with than my topdon and vice versa
There is no way I could work on modern cars. I just changed the spark plugs in my 2018 Outback and while the hardest part was a stuck bolt on the battery tray, I made the decision that as soon as I don’t need a reliable car to get me tj work and back I’m buying a 67 Chevy pickup and I’m never going to have to shove my hands down in an engine and cut them all up ever again. All the electronic components I simply don’t need. No scan tool needed for a 67 Chevy. 😂
It’s funny when you said that you’re pushing 40 that you enjoy the bigger screen, because I think the same thing to myself lol 😅
You should see me trying to read the part numbers on parts
Man I was gonna get a launch x431 but all the positive topdon reviews got me thinking twice
It looks like the same SW
And here I thought I was doing ok with my $12 Bluetooth OBDII code reader and the Torque Pro app on my phone.😂
Depends on the level of depth you need to go into just want to read and clear codes those are fine full on systems diag on something beyond the check engine light or a tricky check engine light you might need something more extensive.
thank you being a beginner Subaru specialist I was wondering what a good scan tool for Subaru would be
I really enjoyed your breakdown of both tools. One thing I would like to see is the data graphing of the topdon compared to snap on. I feel like this is another area that snap on shines at particularly when you combine it with shop stream connect. Could you do a follow up video comparing these features of both tools?
If you want graphing then i think the pico is the way to go
@@isorozco511 ?? I love my Pico but if you want to graph multiple pids on a test drive the first tool you should be using is your scanner. Then you dig deeper with the scope afterwards.
I buy the next model down snap on at discount used once they stop supporting ie my og verus gets me to 2017.
usually not working on any thing newer have all the keys from previous and
ill by the top don in case i run into something newer the trouble shooter and component test is awesome a lot of people dont want to admit it though cant wait for verus edge no keys !
Hello,once i trye to scan Mercedes s500 2020-2023 ,and Ople vivaro dont remember witch year its was,but In Opel it show first dpf oxygen sensor but in real life it was second one,than i work with Mercedes and i show same falt code for another falt,after this i will never spend so mutch money for snap on,never use topdon(loks like lauch pad 7)and price more interesting for it,sorry for mistakes my english not super well
Xtool A30M....bidirectional scanner for under $200 that does basically everything these two do......free updates for life. I am a Snap On addict but after the last S.O. scanner I had stopped working I tried the XTool A30M and it does more than the 10 times more expensive Snap On scanner. I got a Samsung tablet for the A30M and I'm not looking back. So happy I didn't waste 10k.
It’s like the rivals in the uk of Tesco and Asda vs Aldi and Lidl make way for the new brands
Never knew scan tools were this expensive
They don’t need to be; it’s gouging.
Don’t forget the annual subscription can be easy 4 figures as well.
There’s sometime a reason mechanics time is so $$ these days.
These are professional level tools for everyday use by people using them to make their living. There are less expensive tools available for occasional use.
These are both amazing tools but damn... Why not just go with a more budget one like xtool they make great tools for a fraction of the cost
So i would like to see a video on comparing the Phoenix max vs the elite. I dont see much of a reason getting the max and not just save the money and get the elite
I have NEVER heard of topDon only Launch and Inv and Autel..I'ma have to do some research
topdon uses launch software
TopDon just told me I can use the phoenix scope with any phoenix series scanners even the $600ish lite 2. I emailed asking because of the scope. I was gonna get autel for scope but I’m getting a top Don. I am leaning towards the phoenix smart or the remote, but after watching this idk I definitely like topdon!
Whats your opinion on the Autel Maxisys series. The only scanner i have experience with is the nissan Consult system which is slower than dirt.
Never used an Autel to have an opinion on it.
You can use the topdon scope on your phoenix plus scan tool
Yup! Pretty awesome.
I don’t think you can. Because the top of the plus is only a usb and type C. That’s it
@@ageedtahir3128 the scope 100% works on the Phoenix Elite.
Snap-on work good only us automative.
That TOPDON looks just like the launch throttle 3. Even down to the scope
Topdon uses launch software
Yeah there's a lot of Chinese Panasonic softbook scan tools using various names
Can either unit be used to clone my intermittent 2013 WRX sti ECM to my replacement ECM including VIN number to make the vehicle operable?
might want to take a peak at the topdon vs matco maximus line. you might fing some OS similarities ;)
Even if the cpu,memory and storage were identical the difference in operating systems android vs windows hopefully windows ce configured to be efficient still android is optimized and designed for mobile devices so windows is going take longer. Also I may have missed but release date is important to fairly judge each scan tool but the processing power required for windows is higher so newer hardware with more efficient OS equals faster
I have, todon , Autel , and Snap on ,but I have the snap on triton 10 and I have tried the snap on zeus and for me its 2x better than the triton 10 than the zeus the triton 10 has better prices and is faster than the zeus I recommend to buy the triton 10 than the zeus.
Holy crap for those prices those things should fix the car for ya I guess it sort of does actually..
I wish it would fix the car! Lol It would save on some time😂
Wish you did a scope comparison
I use the max daily in my shop along with the scope. But it's a shop tool I'm looking to invest in my own. Not sure if autel or top don or zues will serve my needs best
Did you do more Research?
I really cant decide between Phoenix Max and Launch throttle 3/Pad 7
Autel Ultra is also in my mind
@@alexandrumardare828 is there any other tools in your shop? I guess another thing to think about is where your working
My coworker has the autel ultra and a really good feature with it is when you update it every year (I think it's about 1k) the updates also act as a warranty on the device and they will fix any issues you have with it
Hi,would you try topdon phoenix smart or phoenix max vs im608 pro 2 Autel . Services and diagnostics
What is the name of this device and the name of the large-sized device model?
Is the trouble shooter on the Triton D10? I’m not seeing it or maybe I am looking in the wrong place
Hey bud I am a mechanic I am SERIOUSLY going to buy one of these for the shop quick question is it " bidirectional"? Please 🙏 someone let me know ....love ur videos !
Yes it is bidirectional.
@@MrSubaru1387 oh my God Mr Subaru answered my actual question the guys at the shop will never believe this man thank you so much long time follower keep up the good work your master at your craft sir!
my SO Verus has the same size dongle as the topdon
You should upgrade your snap on Zeus then compared to different
How when this video is pre recorded will you see us in the next one. Hmmmm ....?
The Zeus also is 5 years out of date. Though I agree it is way overpriced and only has biannual renewal at a substantial cost
What are you all using for Hyundai vehicles?
Can you do a 2016 fa20 timing chain in vehicle?
How does the snap on compare to the autel elite 2 pro
The Phoenix Max is like the Smart but bigger. These Chinese tools can do a lot of things for the money, best bang for your buck compare to snapon. Problem is the Chinese do not test their tools long enough before they release them. They rely on the consumers to use them and then report problems so that they can work on a fix. Basically, make your paying customer your beta tester. These tools are extremely buggy compared to snapon, but I would never pay the inflated prices of snapon. The cumbersome brick that connects to the car is also advertised as a j2534 interface for programming but it doesn't work. Some functions make no sense or are non existent. Try history function and find out that it doesn't let you get access to a vehicle like any other scanner on the market. The history shows you data history but no real access to the vehicle. So if you have to work on the same vehicle multiple times, you have to scan for the vin every single time. That's not efficient. All these types of review flatter the tool and push viewers into spending their money for a tool that's not ready. This tool came out a year or 2 too early. With time it will become a great tool as the hardware seems strong. I remember Autel were like this in the beginning but now are one of the top scan tools on the market.
I'd like to see you make another video in a couple of months and tells us how the tool is doing.
This is very true. I have a Topdon Phoenix Elite and it has been less than a year and certain functions are spotty. I was able to program blind spot modules on fords one day and the next the function constantly failed. My secure gateway access I pay autoauth for was working and now fails and says my tool is not registered to my autoauth account which it is. Had to do some digging and found that Topdon fell out of compliance with auto manufacturers and thus a lot of functions that are security locked by the manufacturer stopped working. They are currently still not in compliance and it has been months. Luckily I also have a Snap-on scanner. Don't get me wrong. I really like the Topdon and it does things my Snap-on fails at but it is very frustrating to have functions you need that worked yesterday stop working all of a sudden.
sell me the Elite ? Im in Savannah
Basically a good tech wants both these days
Topdon is the best.
what do you think of topdon phoenix max is it better than snap on?
Does anyone know if the Topdon Phoenix Elite does the electronic parking brake on 2015+ Subaru’s? And how much bi-directional testing does the elite do vs the max? Asking because I’m tired of paying for someone else to do the work when I’m capable, but don’t have the “scan tool” that has that functionality.
It does, but so does the Snap ON
Thankz man ....
exselentes escaner topdon mui bueno master
Does it have FCA Gateway accesses?
Does the Top Don max do Key Programming
Snap on is made with unitanium
Great video.. the Topdon does programming and coding I don’t think you made a fair assessment of that tool I owned the Phoenix plus and I have to tell you it has done many things that my triton has not been able to be even close like security and bidirectional features… specially on Subarus… you can also clone GM modules with their optional ninja box if I were Snapon I’d watch out with their overpriced products and always falling short with their products… I can’t wait to get me a phoenix Max and cancel my subscription with Snapon is just too damn expensive.
Can clone a ACDelco E92? Thanks.
Commentando en el vídeo para el algoritmo
Does the topdon work with obd1 cars?
Jeesh. I bought a 2005 legacy gt, ej255, timing kit, turbo, and intercooler for less than those scanners. Lol. Granted if your a tech for living I understand owning it.
Does It have play Store?
would the topdon work with Chrysler and their security gate way system?
I haven’t tried it on a an FCA vehicle to know.
It will as long as you have an active Auto Auth subscription and register the tool to it the same as you would for the Snap-On.
@@PatrickHakes How topdon is not listed as a manufacturer in the add tool section. I tried with the Phoenix Pro
It's really disheartening how all of this stuff is unobtanium for myself.
Does the max really scan all the modules that fast? That WAs crazy fast.
on some high speed can networks or flex ray networks yes it can
The TopDon seems to be running the same software as the ThonkTool ProS. Any advantage of
one .vs. the other?
they are both launch software based
Anyone want to buy a snap on Apollo D9? Brand new only been hooked up to a handful of vehicles.
But can it permanently turn off the “auto start/stop” feature?
No. Need to buy a start/stop eliminator
Or leave your ac on. The auto start/stop is disabled when you have your ac on
Not true. My wife's 22 Forester does shut off, even with the A/C on. Unless you override it with the button under the steering wheel.
Snap on it’s not good anymore 😢😢😢 very expensive and it doesn't do much The program is bad, it freezes all the time when I use it 😢 everybody what’s going on?
$4,500... budget scan tool
😢
Sure that's not Linux based?
I like xtool. Best bang for buck. I have there A30M, most powerful entry level scanner with bidirectional controls. I just love it. When i have the money I'll get there D9 pro. Topdon max is great. I would love to have that in some other lifetime 😂. But trust me folks xtool is where it's at.
I have a D9 pro, it's ok but I like our Launch X431 at work better.
@@iam1smiley1 The Xtool D9s pro is the latest version. There is no Launch that comes close to the D9s at the moment. They still have to catch up with Xtool. The x431 pro is a bit better than the old D9 but price to performance and features the xtool always comes up tops. I have a friend that has the D9s. I played with it a few times. It's really nice. But I'd go for the d9 because it'll be cheaper now.
SNAP-on for its price repair your car by itself....
The Topdon is a real disappointment I’m returning mine for a Zeus or an autel. This took over advertises its capabilities
That's an expensive scope 😳
do you get any english speaking support with the topdon when you have problems or are you on your own once they get your money???
Maybe you can call China 😂😂😂
Your software is out of date
It’s obvious TOPDON paid you ,,,, how much can you say it’s faster ? Once would do it
Not a great comparison, want to know which one is better for solving problems !
Snap-on trouble shooter is HUGE but you barely mention that ,,,,
Would love a good comparison by some one
Topdon didn’t pay me a dime! 🤣😂🤣