How to set you tv cable dodge Cummins 47rh/47re /48re
HTML-код
- Опубликовано: 11 сен 2024
- How to set you tv cable dodge Cummins.
This work for all dodge transmissions with a tv cable on them. Just make sure you have you transmission side lever pulled all the way at full throttle and your ready to go.
WANT to be a patreon ------------ / cutteruprob
also check out my amazon store ----------- www.amazon.com...
DISCLAIMER: Links included in this description might be affiliate links. If you purchase a product or service with the links that I provide I may receive a small commission. There is no additional charge to you!
Thanks for the video man, glad you did the video out of the truck. Going to go set my tv cable now.
I appreciate the videos..that throttle cable is very important . My dad first Gen which had no lock up and no overdrive had a very tall gear ..a recipe for a lot of heat and failure
Thank you for this video i was able to applythis and the the results were instant thanks again
👍👍 right on man...my 97 is alright... recently had to verify TV operation after I rebuilt my 02 trans this spring..not exactly the same but similar..👍👍👊
Good video man thanks for the info!!!
When i burnt out my 47re i got a 5 speed swap basically for free so i didnt bother looking into it. When i was doing the swap i found the TV cable was completely disconnected. Wish i kept the swap now so i could build it and sell the 5 speed swap. Autos are just better these days.
Great video..thank you !!
Thanks that helps.
Glad it helped
Hey Rob, another excellent to the point video, well done👍👍🍻 Out of curiosity can I adjust the cable while its full throttle?
Not running🤣
Yep that how I do it
I adjust my tv cable by throwing it on the junk pile and bolting in a 5 speed.
I did a 5spd delete and put the tv cable in lol
Hey bud, I have a 98 12 valve automatic transmission. I hooked up a scanner and I’m only getting 59% out of my TPS at wot. So I removed it and checked again with a screwdriver and I got 99% at wot. Do I need to adjust the rod or what? Thanks man!
if your talking throttle cable , i would check to see if you pedal is bent , i have had to fix mine couple times
@@CUTTERUPROB well with everything put together it only reads 59% at WOT. It's not hitting the stop, its way off. Must be something binding. I can't seem to figure it out lol
@@ThrockRocket the bushing could be worn that rides inside of the TPS?
@throckrocket is your cable stretched?
I just bought a 04 dodge cummins 2500 with a rebuild 48re and its been downshifting pretty hard around 1st and second gear and also not knowing whether to be in 3rd or 4th gear around 20 to 30mph. I replaced the trans output speed sensor and that fixed the hectic shifting from 3rd to 4th gear but its still down shifting pretty hard. I'm just now learning about diesels and trans so any help would be lovely, thanks!
Could be the way the trans was built.
Would be best to talk to a trany guy and say what they think.
Thanks brother for the advice I appreciate it now if you have a shift kit does it still get Set up the same way
Did you ever find the answer?
Is there a part number for the TV cable spring 🤔 ???? And are the cables still being made ? Incase it needs to be replaced
I just use the same one that is on the throttle link for the 12v ppump
Would a kinked tv cable cause gear hunting? I’m having a hell of a time taking it down, freshly built unit and it started about 300 miles after
it shouldn't
thank you i needed this video bad my 981/2 will not down shift on a step grade with a load it will go to 2000 rpm and not down shift
I’m actually looking for the new cable and I’m having help finding one does anybody know where I can get one for my 93?
I am not sure to be honest. Some of that stuff is getting hard to find
Gino’s garage they sell a lot of coming parts their quality and they always get you the right part
Probably the cause of my burned out 3 speed on my 1st gen
Is this the same for a518 TV cable with a low stall converter
It is yes
I hooked up surround sound to my TV. But my truck still won’t shift. 😂
Checked the TV cable on my 02. It's good but still got a harsh shift between first n second and in overdrive only 10000 miles on the transmission. Any ideas?
Sounds like it’s in the valve body. But I am not a trans expert
Is it the same process for a 2001?
Yep
@@CUTTERUPROB thank you 🙏🏼
Any suggestions on a first gen replacement cable?
I am not sure if they make a new one. Maybe just geno’s garage
@@CUTTERUPROB didn’t see much on their site either, just 94-98.
I understand how to set them up but i dont understand how to diagnose a bad cable by myself.
Just did a tranny swap and dont want to burn it. Cable should be good but cable itself is questionable so im not positive its working properly.
If it questionable I would replace it for sure
@@CUTTERUPROB Ya ill try to find one again after xmas.
Getting hard to find parts for these now for some reason. Couldnt get the right lines in for my life and had to reject 2 flexplates before they got right one. Made my own lines, came out pretty damn close to original.
I usually set mine up using a full manual valve body 😂😂
well that's a tv cable delete lol
So what you guys are saying is that it’s not needed for a FMVB. I just swapped a 47re in to my first gen and I’m trying to figure out if it needs to be connected or do I lock it in all the way open. Thx buddy for the content and keep the good work!