Это видео недоступно.
Сожалеем об этом.
1978 Hallett Jet Boat - Supercharged BB Chevy with Als Blowers/Garlits Carb Scoop
HTML-код
- Опубликовано: 8 окт 2017
- This is the Shadwick family 1978 Hallet 'Jet Sprint' Jet boat with original metalflake and Berkeley 12JG Jet unit. It has a 410 ci Big Block Chevy motor with an 8-71 Blower Shop Supercharger and our own SC500pb-hl enclosed carb 6-71 blower scoop manufactured by Als Blower Drives in New Zealand. These products can be seen at 11.00.
The scoops are primarily directed toward supercharged carburated engines. They are hand built by Als Blower Drives in New Zealand by agreement between Alan Shadwick and Don Garlits. This arrangement was made in 1987 and the product line has increased in application and quality resulting in the finest street scoops manufactured anywhere in the world.
![[Paris Olympics] Performance by Australia's Olympic Break-dancer Rachael Gunn breaks the internet](http://i.ytimg.com/vi/i1rl1KhKIjE/mqdefault.jpg)
side note........kid memories you are creating are not replaceable 👍
Don't know what's better, the boat the tunes or the scenery. Great stuff. Engine height is perfectly proportioned for that boat. Layout is awesome too.
Much respect for the fact that you guys built your engine instead of just buying one! Very nice video!
I used to watch you race the Blue Jeep at Meremere and the Red Chevy lifted up in the Air. Good to see you still at it, must be close to 40 years! .
What a wonderful way to spend time with your family. I see they pretty much all drive it too. I especially like the RFC sticker.
Thanks Mark sorry for late reply, I don't check YT as much as I should thanks on the RFC Sticker.
búy jet uaght czabin crisrt with jet driçr
This boat was more versatile than I thought, great video
destroked big block with that custom 6-71 job.... in a nice boat with great kids.. your a blessed man! good job!!!
Beautiful Hallet. Not a fan of the fake injection setup but it does look awesome and could fool a lot of people that don't know any better. Very clean setup!
Love the classic Metalflake - Wish they would go back to it. Man I Miss the 70's when the Summer water literally sparkled from the metalflaked rainbow of colours sported by those sleek Low profile/high horsepower SKs
Now what happened ?
@@dimmacommunication Boats today tend to be in solid colours with various stripes.
That’s a beautiful boat and great set up. I have a 78 Spectre that is all original with less then 150 hours. I appreciate your clean work . 👍👍
Beautiful lake beautiful boat!
This is a 19 ft Hallett Bubble Deck Jet Boat. I used 2 build them many yrs ago. 17 ft Hustler & 18 mini cruiser. All fabulous jet boats
It’s actually a 19’6” Hallett Sprint Deck, not a bubble deck. You’re right, they were the best of them all. Quality style and ride
@@sammendoza7168
I used 2 build the 19 ft "mini cruiser" & 17.6ft hustler both by Hallet .
The mini cruiser is a sensational jet boat ... a few here in Australia were fitted out as V-drives . And the hustler spun on a dime & danced on top of the water . ❤'ed 'em both .
gód fór yoú
Beautiful classic Hallet and a beautiful lake - looks like everyone is happy!
Very nice.mines a sleekcraft with 454 berkeley pump it's a blast at lake of the woods southern oregon
Awesome boat, beautiful scenery too. Thanks for sharing! Keep Spinning and Winning...Cheers
That's class! And I never knew tarawera was so big! Thanks for the video
Beautiful boat, beautiful lake, view, rock on y'all!!
AWESOME---boat/vid edit/pics 👍☠☠👍would make a great calendar for next year cheers
Oh wow are those Bassett headers ?? I had exactly your same boat, oh tears in my eyes, the exact set up, my boat was called and registered in California under the name FOR PLAY.
Thank you Alan, love 'my' 79 Hallett and yours is the "BOMB'. Great video, everyone is safe and responsible. Post more!!
Perfect with rear blower belt ! this boat makes it's own music ..
That water is so clear.
Beautiful. Had no idea there was such a selection of amazing lakes in New Zealand.
Thanks for the share!
Would love to take my 79 Tahiti Super Cruiser w 454 Berkeley 12F jet there someday! 🤙🏻
ßearaíde f14 betè 9⁰ hp spírt jet 6 ñóg 16 galoñg ⁹6 mióé rànhgé
Awesome boat! You all look very proud of it, as you should!
Very nice. Brings back memories. I had a 20' Eliminator for 8 years. 454 Chevy and Berkley Jet, Jetovator, all the stuff. No blower though. Pulled up 5 skiers on slalom once. No problem but keeping the ropes strait. Had many good times.
great looking lakes but didn't recognize the names. Where?
I love how its driven from the pump as I have a fortune in my upholstery and no room for a front snout on my 440
SICK BOAT!!!!
that metalflake is soooo 70's ... thumbs up
The only way to do a boat! Very sweet!
Amazing...great boat 🚣♀️
Beautiful scenery in New Zealand, I'd love to visit there. How ya like that Detroit u.s.a. muscle motor mate ?
Great job on the boat 👍😎
Thats n interesting blower drive! Drive pulley on flywheel? A crank trigger and just low cap n rotor? Mr Shadwick please fill us in😃😃😃😃
Great vid but the music was messing up everything 😬😬😬🤘🤘
Very ,very nice , 410 BB , Supercharger, wow,, Thank you for the video.
Gorgeous float!
KaiIwi Lakes are where a lot of my Ancestors roamed ,been there on holidays in the 60's.
Beautiful boat sir
Beautiful boat and it sounds great. I wish you didn't feel the need for that awful, distracting music backing track though.
the jet drive is interesting on that power... beautiful boat.
I love you crazy friggin' Kiwi's!!!!! I got a 4 bbl 350 in my old glastron!!
I love metallic sparkle on things that go fast.
Cool setup.
Absolutely stunning Hallett you have there. Can you give a little detail on the blower drive setup? That is very unique and seems much safer in an open engine boat
Hi i made the rear blower drive myself, made a small flywheel then skimmed centre out oof flex plate and bolted half a flex plate to the flywheel for the starter, then made a hollow blower pulley and bolted it to the flywheel and then the u Joint in thru the blower pulley. ran a small bore 871 so i could keep the top pulley smaller, runs 7psi. alan
Hallett built beautifull jet boats
Beautiful boat.
Nicely done!
dads got some hidden shit here lol
What camera did you use for this? Amazing quality. Great boat too!
Good video keep up
@6:00 oh no .... the bane of jet boat owners ..... good times tho👍
Simply sweet
I bet that's a rare boat in NZ
BEAUTIFUL!!!!
Hell ya im trying to bring mine back to life sure could use some help got money but no lines to a good motor Builder
That think is got a bad ass rooster tail
Thats one stunning machine! And involving the family like you have is just fantastic! Blown big block baby! Sounds nasty with that big cam! Very very impressive! Great build what condition was it in before you bought it back to life? Thanks for great video i enjoyed it alot!!
Where did you get those seats and what would you call them
I want one!
Nice colors ,,, wish I had one 🌅
90mph roughly
@@alanshadwick8780 holy shit thats got some balls 90mph!
I’m very interested in your blower drive set up...reversing the blower to the drive end
beautiful boat, just sucking up every rock from the bottom and putting it through your pump. Ouch
He's on a volcanic crater lake. Max depth is 287ft. Long way to suck up rocks, besides which jet units have screens on the intake.
The manufacturer of my boat was Sanger.
Dad had a sanger. Uncle has a Hondo. I ended up with a Cole
Very cool
Was it a 396?
this looks like the same boat Mike finnigan bought not long ago
Mike got a placecraft built by tom peterson, while similar, it is different as finnegan's boat had a raised section in the middle of the deck on the dash to accomodate gauges, although mike has opted to use a Holley EFI digital dash
Sorry,i didnt read thru to your replys,now i see the rest of the vid,duh duh🤦♂️🤦♂️🤦♂️
Just don't turn sharp, words to live by literally.
I rode in the same set up in the mid 90's on Lake Tapps Washington USA it was a thrilling experience.
Very nice. But where is the hearing protection....??
Wouter ke get a life
Water injection quietens it down a lot
do you still have it
what pitch you running I want a rooster booster more than anything
Place diverter
I dont know I contra'd a stainless impellor off a friend here who had raced jet boats here in NZ, all i know is it had 116mph on the impellor and he said it would be better, if i didnt have the blower I know it would be harder to turn it,The old impellor was a B and it had a tunnel rammed 468 when i got the boat. it has a droop snoot and otherwise a std berkely, alan
They need a new band...
Well, there went the college fund
Exactly (smile)
5:50 annnnnd there goes your impeller and wear ring clearance.... wtf is he doing? You can see the mud and sand coming out the jet
4:10 Beautiful.
Lil piapoah. Love yous
that's not American fuel
Nice boat, horrible annoying music.
All Bark, No Bite! If this was a prop boat it would be fast, being it’s a jet boat , 500 wasted horse power! I could out run this boat with my Bullet Bass boat 225 mercury racing engine! Easily! That’s why when you see and here a jet boat it’s only doing 55 to 70 Mph! It sounds like it’s doing 85 to 110, but it’s not, people that know boats know this!
Jimmy Cline chill jimmy just a hobby 😂😂😂
Jimmy Cline jet boat will get to 70 mph before your bass boat starts to plane
Jimmy Cline what a prick. Always at least one expert out there with a opinion on something they don’t know shit about. Nice boat sir. Glad to see you including your boys on the build. Future jetters
I guess you didn't notice the fact that the butterfly wasn't opened very far? or that Al built that engine himself? Post a vid of your toy going over 40 mph...I dare you!.
You are absolutely correct! BUT, I have built a big block for a jet boat and the customer knew full well that it's all sound and no pound! It was all about the awe effect and the raw sound and torque
Nice boat. Boring video
That too much boat for those kids. A disaster waiting to happen.
@westbender 820 You made it my business when you put your dumbass boat on youtube asso.
Not really. No. Its called proper parenting.
Hate that surging
It's a lumpy cam..
@@dieselpower5303 No it isn't, it is blower surge, a lumpy cam lopes. The cam is pretty mild. Stick with your diesel cam specs.
Weak it should have had a Hemi
That is so irresponsible bringing all of those people on that.