Dude, time for a new oil pump! The good news is you can get the pump cheap from boat dealers in FLA, and while your fixing the front cover leak you can getRdone. Wern't you in the mountains for the older vids?
brother this truck is long gone! but i do appreciate the advice... and yes i was in the Colorado mountains but we've moved back to florida! been here for a while now
Thanks for sharing this video. Was helpful and encouraging. Spent the last six months slowly bring back to life my 94 Dodge 12 Valve 5.9. With 47re Automatic. (pretty much the same truck, I think)
Probably already figured it out but I had my problem with my throttle valve cable and it roasted my forward clutches and a whole bunch of other things can be changed to make it better trans is the weak point sadly
Awww man I’m so sorry to hear that, gotta be super frustrating to figure that out. And as far as the tail lights go, they were on the truck when i bought it. Seems like eBay/amazon lights
@@TheDogHousetv yeah they're a pain I know what needs to be changed out and modified to actually work the manual is alot easier but im going for a racing application so automatic is the way to go
I have the twin lol. I have a 94 2x4 5sp with air bags on the rear. She had 330K whenever I pick her up last year. I drive it everyday. For $1,500 I’m not complaining.
If you have no lockup and overdrive from the computer your TPS is probably bad. You can apply ground to the OD circuit just like you did for lockup to enable OD. You can look online to test the TPS too.
Just to let you know I had to clean the ground connections for my dash in my 01 ram because I lost my gauges I also cleaned where it mounted to the body and it cleared up my issue. So go over all the ground connections and you might not even need the switch.
What size tires? I almost want to say you're not even going into overdrive, rpms seem way high, with 235/85/16 tires, 4.10s and a 47rh you should be right about 1950 rpm at 65
my dually has 4.10 rear gears 2wd and at 60mph im at 1900 rpm at 70 mph im at 2300 rpm...it has Lt 215/85 r16 tires...what size tires are on your truck?
eric buck my work truck has 4.10 also it’s 2wd with 12 ft stake bed When I do at 65 mph at 1800 rpm or 80 mph at 2500 rpm I put oversized tires on its 235/80
yeah i was gonna try taller tires to try and get my rpms at 2000 rpm when im going 70 mph towing on the interstate...my brother is running 265 85 r16 on his dually and his rpms are even lower...
Buddys has a 94 12 valve and found out his brake light switch or something was causing that before he five speed swapped it look something up with that .
I would say buy watching the rpms the lockup is not working when it goes into lock up the rpms should drop 300rpm or more. I would drop the pan put new senors in it. Also the tps is probably shot. You can buy a tps delete kit or make your own. Also I would adjust ur bands to. You can also try and adjust the tv cable also
Landon Schad would look clean on this truck it’s cheap would last and he said he not trying to put the money in it to paint so it’s a good clean looking option that hides marks easy and last long unlike a wrap would
I painted my whole jeep that was originally blue. I painted it black with 2 gallons covered the mirrors and the roof rack and the door handles. Only $275 invested with sandpaper and everything!! I love it.
Monstaliner the entire thing red. It actually would look really good. And then throw some 22x10 fuel wheels in the front with the matching dually wheels out back.
Dude, time for a new oil pump! The good news is you can get the pump cheap from boat dealers in FLA, and while your fixing the front cover leak you can getRdone. Wern't you in the mountains for the older vids?
brother this truck is long gone! but i do appreciate the advice... and yes i was in the Colorado mountains but we've moved back to florida! been here for a while now
That oil pressure is slightly concerning
So was the transmission, LOL!
You could've another toggle for OD? Or pull the pan n valve body n swap the solenoids n gov pressure switch.
Does the size, gauge or caliber of the wire you get matter for this. I got some wire but its kinda big
DODGE- Drips Oil Drops Grease Everywhere. Lol. My 12valve says it all. Lol
1:40 Travis “shhhh not while I’m pouring” 😂
Henrick Henry when did he say that
xTGx Phyzix he didn’t say tht I jus though b funny if he did seemed to fit well lol
Henrick Henry ohhhh I see lol
I don’t believe your overdrive is engaging. Seems way to high for 4:10s.
I agree!
Ground problems can make your overdrive shift funky or not shift at all so check all your grounds
Thanks for sharing this video. Was helpful and encouraging. Spent the last six months slowly bring back to life my 94 Dodge 12 Valve 5.9. With 47re Automatic. (pretty much the same truck, I think)
Where did you get those brake lights
Probably already figured it out but I had my problem with my throttle valve cable and it roasted my forward clutches and a whole bunch of other things can be changed to make it better trans is the weak point sadly
Awww man I’m so sorry to hear that, gotta be super frustrating to figure that out.
And as far as the tail lights go, they were on the truck when i bought it. Seems like eBay/amazon lights
@@TheDogHousetv they look good did you figure out the overdrive issue?
I did not, i believe it ended up being a trans issue overall. I ended up selling it to one of my subscribers who i believe still has it today.
@@TheDogHousetv yeah they're a pain I know what needs to be changed out and modified to actually work the manual is alot easier but im going for a racing application so automatic is the way to go
I have the twin lol. I have a 94 2x4 5sp with air bags on the rear. She had 330K whenever I pick her up last year. I drive it everyday. For $1,500 I’m not complaining.
I know this is an old vid but I heard you say that’s 240 money and I instantly subbed lol 😂
Gabriel Cortez yeah i went full 240 😂😂 there’s a playlist of it
If you have no lockup and overdrive from the computer your TPS is probably bad. You can apply ground to the OD circuit just like you did for lockup to enable OD. You can look online to test the TPS too.
That 12v ufff I’m a Chevy die hard but them 12v Cummins Motors are the best Diesel engine in any pick truck
mine just started going in and out today
Chunky Boy Customs damn it really?!/: i haven’t even messed with mine lately. Lol
Just to let you know I had to clean the ground connections for my dash in my 01 ram because I lost my gauges I also cleaned where it mounted to the body and it cleared up my issue. So go over all the ground connections and you might not even need the switch.
How much does a rig like this run you?
4-5k
What size tires? I almost want to say you're not even going into overdrive, rpms seem way high, with 235/85/16 tires, 4.10s and a 47rh you should be right about 1950 rpm at 65
Dean Wissmann shes definitely not going into OD /:
Make sure the ground for your overdrive off switch is good and verify it’s not stuck on. I suppose this is going to be a tow rig?
Check all your ground wires from battery to body and frame and engine make sure they clean had same issue with a 98 cummins
Also clean the terminals really good and clean every ground on the truck.
Hey man that thing that clamps on your steering wheel for use when backing up, where do you get one? Would love to have on on my 99 Cummins
Converter clutch , probably burnt out.
I'm almost positive I have a brand new set of drop shackles for that truck just sitting around..
Dylan Hamilton forrrreallllls
The Dog House I'll message you on insta
Dylan Hamilton okay brother!
I don't think you have od. Could be a trans temp sensor and look up how to adjust your tps. It's really easy, you just need a multimeter.
my dually has 4.10 rear gears 2wd and at 60mph im at 1900 rpm at 70 mph im at 2300 rpm...it has Lt 215/85 r16 tires...what size tires are on your truck?
eric buck my work truck has 4.10 also it’s 2wd with 12 ft stake bed When I do at 65 mph at 1800 rpm or 80 mph at 2500 rpm I put oversized tires on its 235/80
yeah i was gonna try taller tires to try and get my rpms at 2000 rpm when im going 70 mph towing on the interstate...my brother is running 265 85 r16 on his dually and his rpms are even lower...
Yep, no OD. You have a 3 speed. Check tps, trans temp switch, tv valve, and OD solenoid.
Im at 1600 rpms a 65 not sure
What exatcly does the lock up do? Do u need a built trans?
Beeline the whole truck then paint wheels mirrors and bumpers gloss black. Will look good
That's a great truck bro can't wait to seethe hole rig up with big booty Judy towing the 240 to events lol
What rear do you have? Probably have a bad ecm or it’s on it’s way
Mines 410 rear end and at 60 miles per hour with torque converter locked up it runs at 1900 rpm you may have an overdrive issue
Buddys has a 94 12 valve and found out his brake light switch or something was causing that before he five speed swapped it look something up with that .
He did the solenoids and and all the sensors and shit too
Tps sensor
I would put a set of 4k gov springs in it also there cheap easy to do and is one of the best upgrades u can do.
Yes plasti-dip all the wheels Black 👏👏 and wrap red. Btw she sounds so good. But the paint would be better. Naw no gold.... Something new
I would say buy watching the rpms the lockup is not working when it goes into lock up the rpms should drop 300rpm or more. I would drop the pan put new senors in it. Also the tps is probably shot. You can buy a tps delete kit or make your own. Also I would adjust ur bands to. You can also try and adjust the tv cable also
I have a 96 regular cab dually 👍
You didn't get into overdrive
If you were in overdrive you'd be at like 16 to 1700 rpm at 65 to 70. Your at almost 2500 at 60, that's way to high
Put 10 lug adapters on and run semi truck wheels
Wtf why is every second gen rattle canned 😂
Turn down the throttle plug. Love the new dually though 😍👌🏼
My buddy bought the same drone for 190 bucks
yeah, talon won it hahah some raffle i believe.
The Dog House it’s like a $400 drone tho
Solenoids i would guess
65mph at 2500rpm is insane if ur going into OD u got prlly 456 gears not 410
Bags 🤔😬
Man that gearing sucks. Redline at 70 mph. Wtf
Slam that dually 100%
I think that’s 2 different wheels man
Bedline it! raptor liner
Landon Schad would look clean on this truck it’s cheap would last and he said he not trying to put the money in it to paint so it’s a good clean looking option that hides marks easy and last long unlike a wrap would
I painted my whole jeep that was originally blue. I painted it black with 2 gallons covered the mirrors and the roof rack and the door handles. Only $275 invested with sandpaper and everything!! I love it.
Monstaliner the entire thing red. It actually would look really good. And then throw some 22x10 fuel wheels in the front with the matching dually wheels out back.
Build the truck a lil atleast
Murk it out lol !
Good grief! I had to quit watching after all the initial BS. Did you ever get to the lock up?