80's Power Ratchet Lithium Conversion Black & Decker Snap On
HTML-код
- Опубликовано: 8 апр 2024
- Snap On model 1050
Black & Decker model 9050
Craftsman model 900.111430
Stuff I used in the video:
USB C lithium charging boards: amzn.to/3UkzNyN
USB C charging Boards: They run off a t4056 chip that charges lithium cells at 1amp. Some of the boards also have an output where you would power your device and it would shut off power when it got too low. You CAN'T use this function for power tools as they draw way too much and you will cook the board in 1 second. Wire it like I show in the video. There is no low voltage cutoff, so you will have to be smart and know when the tool is low on power. This will be your last sign to charge before you ruin the cells. Honestly you would have to be pretty oblivious to keep pushing it though.
Buy New batteries: If buying new, I would buy a single 21700 cell like the "Samsung 40T" . These are around $6 plus ship from various suppliers online. I wouldn't worry about using 2 18650 cells like I did as it is very tight.
Soldering on Lithium cells: I've done easily 500 cells now and never had a single issue. I have tried to damage them and haven't been able too. I mainly deal with Hi Discharge cells though that are rated to handle high heat. Steps: sand the cell top; soldering iron as hot as possible; rosin flux works fine but takes 2-3 seconds longer; Acid flux(plumbing flux) is super fast but wipe off surface after tinning; use rosin core solder to tin the contact and wire/nickel strip; Solder away. If it takes over 5 seconds to see solder melting/flowing, stop and check your setup.
After Thoughts about the Video: The great thing is Lithium doesn't care when you charge it..... What a fantastic little ratchet. I used it this afternoon on my 1952 Ferguson tractor to remove a starter switch and it was great. I'm happy with the $20 purchase combine with the $2 charging chip and free battery cells.
SUPPORT THE CHANNEL or support the SHOP DOG's treat addiction:
Buy Ginger a new bone: www.paypal.com/donate/?hosted...
sixtyfiveford
sixtyfiveford/
Ginger Birthday wish list www.amazon.com/registries/bir...
65 Ford 65Ford SFF 
Хобби
Those screwdrivers and the rechargeable lights were the go to father's day gift for the eighties andties and nineties
the led upgrade for the lights is a thing too
that screwdriver and a snake light. lol
I remember all that stuff.... I can't even express in words how excited I was to get a Makita 7.2 volt ni-cad cordless power drill..... Heh heh heh!!! Batteries slammed in the handle like the mags on a 1911..... Heh heh heh!!!
Ohhh yeah.... That is a trip down memory lane right there... You're not wrong, all the cool guys had the charging base thing screwed into the wall of their garage....
Those makitas were probably the coolest thing around at the time, you're not the first person I've heard/read say something similar. I think those old drills would be great to do a battery retrofit on, because the internals on those drills are actually really really nice.
There's a flashback. My Dad had both of those. When I bought my Husky 12V ratchet, I was expecting it to be waaaay better than the old B&D. Turns out, the battery is about the only technology that got better. It just lasts longer now. Not much more (noticeable) power. Great stuff, my friend!
I have the Husky too. Too big for a lot of jobs I find.
@@StrokeMyLovePump yes! I've had to reverse it at times because I backed it into a bad spot.
Not sure why somebody hasn't come out with a skinny handled one with three of these cells stacked end to end. If they did that, it wouldn't be much bigger than a regular ratchet.
@@sixtyfiveford yes, that's a great idea! I'd be all over that.
I have both of those in my garage, had them since new and yes they were birthday and father’s day presents decades ago, I run across them every once in a while and sigh and say I’ll get to it. I think i’ll dig them out tomorrow now that i’m retired. Thanks for the video, subbed.
Son of a. I literally tossed one of these the other day after it sitting in my toolbox dead for 5 years. Keep up the videos!
Seeing the Black and Decker screw driver triggered some great memories with my dad from the 80s/90s. Cool vid
Talk about a trip down memory lane. My father had both of those and every weekend they'd come out for projects
I miss getting these old Christmas gifts!
Wow I had forgotten about the revolutionary power screwdriver we had when I was a kid. Well done on that retrofit!
Sweet, I am doing this ! I have a Craftsmen 3/8" ratchet like yours that my grandma gave me in the 80's. Much quieter than my air ratchet.
That is awesome!
Modern high drain 18650 and 26650 batteries have tons of practical applications.
I'm going to be searching for a power ratchet at estate sales & garage sales. Thanks Moe for the upload
I have the B&D screwdriver and a 3/8in Skilwrench which is all metal body. Thanks for the video, I have been pondering replacing the dead batteries with new lithium cells.
Very cool. I remember my dad having those as I was a kid. I would use them to work on my bikes.
Awesome channel, most underrated. This is how you fight climate change, do not buy new junk, but repair stuff. Not by exchanging plastic straws by paper ones....
Great point!
yeah, instead of stupid energy efficiency standards for appliances they need minimum ten-year warranties and parts readily available for everything instead of disposable Chinese garbage.
Those were excellent cordless screwdrivers!
I had one for many years i used everyday.
I got rid of it many years ago when i moved, no longer using it, and battery was dead.
"You get us unstuck. I'm going to eat snowflakes."
What a life
@@sixtyfivefordbro i support your video but please add a undervoltage protection for the battery or else the battery could die
I’ve got both and have actually kept them hoping I could eventually replace the batteries. This is a video I’m definitely keeping bookmarked 😁
Awesome! Thanks for covering doing this. I made a video, I think the Hypertough and Nextec battery comparison and noted I am planning to do the same or similar. Neat to see performed already. Thank you sir! Kind work!
Always a pleasure to watch your videos thank you.
Hey thanks
Well done, what an awesome project. I’ve seen plenty of the screwdrivers but never the ratchet. It just so happens I ordered a DeWalt battery adapter for our Dyson yesterday so you know what I’ll be doing with the old battery, I’ll just have to find the ratchet now😂. I love your dog chasing snowflakes, that’s so adorable. Thanks for another valuable lesson, Stuart 🇦🇺
B&D also made a rechargeable blender in that time period. Made me popular at the boys annual golf weekend. Lots of good memories with 20 guys and a bar closing for the season, and not wanting any stock left to store over the winter.
Didn't know they had a blender! That would be fun.
I've got one of those somewhere, I might dig it out and upgrade it. Great tip on using an old vape for a charging part
Wow, this tool brings back bad memories from the 90s, of an under powered tool, with a battery that never lasted.
Where you put the charging port, I think that’s the best spot.
I have the same ratchet! I was planning to do the same! Thanks for the motivation to do it!
Go for it!
I love the up grade !
I have always learned something from every one of your videos that I didn't know before. 😎👌 I do kind of the same stuff as you in my garage so your videos fit me perfect. When I saw your Leatherman on the bench I thought that I would love to see a video on which multitool you find to be the best for all around. If there is enough content for that kind of thing. I have the Gerber center drive but i am kind of curious on upgrading to a Leatherman.
Just an FYI. You can buy those TP4056 charging boards with protection circuits build in. They will prevent over discharging the battery. They are slightly more expensive and slightly larger.
The only issue is the pass through low voltage current they are able to supply is really small. I think around 1 amp which is too small for any tool application. I would guesstimate that this ratchet or even screwdriver version stalls out around 10amps. The chip would work fine for a flashlight or similar low current application.
@@sixtyfiveford Yeah, I never thought about that.
@@sixtyfivefordthe biggest issue with those boards is not the missing over current protection its the missing under voltage protection which can and will damage the cells
Great job re-powering it. I had one back in the day, my friend wanted one I wanted one. Then got it for a gift I was so excited. My friend got one too. I remember being a little disappointed with its torque. Meanwhile I did come across my old B&D power screw driver which I thought was gone, dead as a door nail of course. Half of me wants to re-power it, the other half of me is like 'I don't know, I have to buy more 18650 cells'. I always end up using any 18650 cells I have in my flashlights. I will investigate if I can get battery packs from the recyclable places.
I have the previous model, the all steel one. I've been meaning to convert it for ages
Somewhere in my tool collection is the B&D Screwdriver. It was always my Go To in the house. Awesome to see you convert them to Li!! Cheers Moe! Zip~
Hey Thanks.
Glad you can keep track of all this stuff. I'd be with Ginger eating snow. Bless Yall
That sounds like a much better life
@@sixtyfiveford It'd suit old geezerish me!
You're a genius mang.
I had two of the drills I gave my grandpa one of them new he loved it
My dad's still got the book 0:42 you showed. Growing up i used it for reference a few times.
That's cool
My dad had these too, wish I still had them, I didn't buy another cordless tool until lithium tools came out.
Moe, you are one talented guy.. love your Channel...
I appreciate that!
Once again, you're a good man, my brother. Nice work on this video. I do stuff like this too.
Awesome
Awesome how compact that ratchet is. One way to supercharge it would be to switch to an RC/airsoft style LiPo battery pack instead of the cylindrical cells. Find a 3S or 4S pack that fits within the constraints and get some speed outta that little beast.
Great rebuild, was thinking about the vape boards right as you mentioned them and have been wondering about using them as I find a lot lying around the road
I've been collecting vape batteries/boards. Haven't found a use for them yet... Soon.
Nice job. I converted my Versa Pack batteries to 18650 cells, but your way is much better.👍
By catching the snowflakes Ginger is trying to keep the snow from getting too deep. She is such thoughtful sweetheart. 😘
She's was doing a great job. I was so preoccupied I didn't even notice until I rewatched the video clip.
the snowflakes , is Ginger self-taught?
Nice Video. Really enjoyed it.
Gonna try this with my Makita 3/8 impact I bought many years ago when I was an auto tech. Super handy to have when working on small engines, but the battery life is garbage. Used to be decent for auto repair, but those days are long past. I also looked into getting a more powerful motor installed in it. Ain’t technology wonderful nowadays?!?
Great upgrade to make the classic battery powered tools from the 80s work again there sixty five Ford
It seems that many of the older Black & Decker tools were really great, but then they seemed to just stop making worthy tools, or at least started making consumer stuff. I'll bet you could educate us on what's what with B&D, and what vintages to buy and what not to buy. That was an extremely slick power upgrade. You're the Wizard of Fixit--along with your trusty sidekick, Ginger.
Anything that has the "professional" nameplate on it in gray or yellow lettering is good. Anything with "industrial" in red lettering is also really good. The best would be the tools they made from the 60's to the early 80's in aluminum housings with orange badging. They had a distinctive era where the tools were better than even milwaukee back then. I buy them for next to nothing because everyone thinks black and decker is all homeowner junk like toaster ovens and hedge trimmers 😂😂😂
Look up B&D 1065 "shorty" drill and its more modern cousin the 1165. Anything that looks like these will be pretty good. Look up model number 1321 as well. 2 examples of very good tools from B&D
@@machineman8388 Thank you very much for that explanation. That really is valuable information. When I started my first carpenter's apprentice job in the early 70's, it seemed like Black & Decker was one of the most coveted names in circular saws and drills and stuff. Right up there with Porter-Cable and Milwaukee and such. Thanks again.
@@jbj27406 so you're roughly the same age as my father, he graduated high school in 1973. Its interesting you mention that being a coveted name because that's what I figure when I see some of these tools. Some of the old B&D stuff I have is unrivaled in terms of quality. But when I ask my dad, who never necessarily worked on the trades but has always fixed his own cars, built his own cabinets and decks, etc. He says he can't remember them being anything other than homeowner grade tools. I think much of their higher-end tools were only marketed to professionals and industries in certain channels, and as such they were beat out by milwaukee who also targeted professionals and DIYers alike but in big box stores like home depot. Thats just my guess at least from what I've gathered. Almost all my stuff is older than I am.
@@machineman8388 Pretty close. Class of '68 for me. I still have my 13 amp Milwaukee #6365 7 1/4 inch circular saw that I bought brand new in 1976. I built a deck as one of my first side jobs and every nickel that I made bought that saw for me. I still use it all the time.
Another winner!!!! 🏁🏁🏁
I'm gonna need a cordless ratchet for a little job I have to do sometime. This is a neat little project, if I can find an old B&D ratchet on ebay I'll be giving it a go. Thanks!!!!
I like the compact size for sure.
That's really funny I just did the same thing today. I got two old Makita 7.2 volt drills from the mid 80s I believe. I used two 3 amp hour 18650s from a vape I had laying around and got some BMS boards and a lithium charger that plugs right into the original barrel plug on the drill from eBay around $10. Works good as new now going to do the other drill probably tomorrow.
Snap-On divas have been triggered.
We can only hope
Awesome fix. Hay does it hurt to be that smart. Ha ha thanks again and yes i had that screwdriver
Hey thanks. Weren't the screwdrivers only around $19.99? I guess even if they were, that's probably $80 in today's money with the way things are going.
I got it from my sister for Christmas so l don't know what it cost ,about 40 miles away in reno we had a JC PENNeys OUTLET AND I use to get lots of B AND D TOOLS AT SUPER PRICES and there tools LIKE THERE $ 3000 + AIR COMPRESSOR WITH A DENT IN THE BELT GAURD FOR $ 800.00. OH THE GOOD DAYS WHERE DID THEY GO .?
i used vape batteries and put 2 or 3 of them into the vape case along with the stock vape charger and used it to run a battery powered floor sweeper. I also built other things using vape batteries and use my rc battery charger to charge up the batteries since i can do all sorts of different types of batteries and set the charge caps and rates. They are inexpensive and some can even be used as a light duty power source.
Awesome
I have the cordless screw driver. I have thought about this for a while now, but I never found time.
Great video! I have a secret source for lithium ion batteries with the charging board included. It is a retail outlet that used to sell them to hobbyists but won't anymore because it is considered legally liable. I wish that recycling centers, Lowes, HD, Ace Hardware, etc. in my area would allow me to pick up lithium ion batteries used. I don't know why they won't, but universally, they refuse. Probably the same reason. The good news is that good, high drain ones are not expensive online . Is that a recent video of you in the snow with Ginger? Wow!
Yeah that was me and Ginger last week in the snow. Got stuck for a few hours. Recorded a bunch of video but not sure if I have enough to put together a cohesive video.
@sixtyfiveford Wow, that snow is something, this late in the season! Here in WA, we'll be lucky if we have any snowpack left.
@@waltschannel7465 I had to go pretty high up the mountain to get this snow and it was soft mush. As far as Lowe's Home Depot; I've only had one Lowe's tell me no. But then again I don't ask; I just grab. I've had a few times where they asked what I was doing and I just say I'm doing experiments/projects with these garbage batteries and they say ok.
@sixtyfiveford The stores here put hasps and padlocks on the battery disposal bins. They used to put the bins near the entrance next to the shopping cart bays; out of sight out of mind. But now the bins are on the exit side of the registers, carefully watched. Some won't even let the consumer deposit batteries without employee assistance.
Dang just trew myn out a few month's ago wish I seen this back then
Love seeing a Dyson pack in the 'kiosk' They have a turd BMS that tanks the whole pack if one bank goes a bit out of balance. Out of 15 or so i found they all had perfect cells. Nice Sony and Molicell and 6 of em great for a 2p 12v build. Pain to pry apart the clamshell though
When I first started collecting battery packs, I actually did not give the Dysons a second thought. Even left some. Then I started prying them apart. Finding that virtually all the cells are good. A lot of them have a magnetic sensor at the front that would just go out causing the pack to brick like you said. Now they're my favorite packs.
Gotta love it !!! Tater Tot says Hello to Ginger !!
Nice I have both of them !
Nice 👍
Very Cool
Huh, that’s cool. Kinda want one
You could try fitting a stronger brushless motor the same size would be another awesome upgrade to get some more power out of it and as they are using metal gears in the production I think you wont have any issues regarding strength
That would be cool
Bro can you do this to my old gimbals this would be a perfect mod to use usbc as my charge ports are warn out
Interesting video. Too bad I threw my cordless screwdriver away years ago.
Was that a Ryobi power source I saw in the background? Do you have a model number or info on it?
That's the Ryobi soldering iron station.
I would pay to have this done
MM77 Approved 👍🏻👍🏻………………………………………Years ago, when my dad passed away, my siblings put me in charge of going through the tools he had. He kept tools no matter if they worked or not. I threw away a couple of those ratchets and four of the screw drivers. The batteries were dead and the tools didn’t work. If I knew then what I learned today, I would have kept them and fixed them just because they were his.
a bms would be a good idea, i know its not likely to overheat but running lithium low on voltage then charging them can cause them to short internally and catch fire, i know, ive done it.
plus theyre literaly $2 on amazon
There is a charging BMS. That's the USB C device. There is not a low voltage shut off though. Because you cannot find ones that will run these tools. They all have to have pass-through power and there are none that will supply the 10 to 20 amps required. They are all for low drain devices around 1 amps. The charging BMS will not allow it to overcharge and catch fire. All of these cells also have a thermal fuse and if they get too hot it'll simply blow the thermal fuse.
Now, I just have to upgrade my old Versapack batteries.
*SIXTYFIVEFORD:* He knows this technology so well he makes original videos
*ME:* "What do you mean $125 plus parts?"
Nice video as always, what leatherman tool was in the video?
Thanks. For the past year I've been using one Leatherman Free P4. Mainly just because I can open and close it with one hand.
8:50 Big Clive does a thing on vape batteries. Interesting that these things just get thrown away. I've never seen one, guess I don't live in the right areas. Gunna start looking. Lotsa stuff needs batts.
I've only found them a few times. Out in the forest/woods of all places.
i sat like 1 or more minutes on cells with an iron but those cells were low power and somewhat old. Worked just fine. Would not do it with high output ones. Unless i can manage it within like 5 seconds :D
Hi Moe. I Got My Dad One Of Those Screwdriver Ones . He Killed It. Then I Got Him A Skil Powered Ratchet . Nice But It Eventually Broke . He
Used To Break Everything! Especially if He Tried To Fix It !😂😂😂 ! Anyways Nice Job.
In love it. I couldn't find a print ad for the price of those screwdrivers originally. I recall they were something like $19.99 or $39.99.
What happened to the Skil version?
What about upgrading the motor and speed control? Would it be possible with a rc car motor?
I don't see why not. You'd just need a motor small enough, as it's pretty tight in there.
I saw your comment on a video about the Snap-On version Moe! About it being build by Black & Decker. Can't remember the channel name at the moment.
Found it, it was a short from @Bang4BuckRacing
Yep, that's it. I think he said he bought every single one up on eBay. At least the snap-on ones.
The B&D ratchet must of been USA only because i have never seen it here in the UK, we got the screwdriver but not the ratchet!
I think even here they sold very few.
One thing you have to be aware of it's bad to take Li-ion battery down to below 3V, so don't run it until flat. Better is to fit a small management board inside that will turn off motor when cell voltage gets too low
Info on that hammer? It looks like it would be handy for some body work.
It's a vintage tack hammer.
What screwdriver is that? It looks like the Vessel Megadora but mine has a knurled shaft and no hex bolster.
Vessel! You know your stuff.
It's a Vessel Magadora I bought in 2018. There is no hex on the shaft. It's just knurled.
👍👍
I'd actually get one of those and convert the batteries in it if they didn't keep all the battery recycling bins behind the customer service counter here. If I have to buy batteries, it's not worth doing conversions like this, but I guess the experts that run the box stores know more about recycling and how recycling them is "better" for the environment that just re-using the good cells!
I have both of those found the ratchet to be pretty useless you had to loosen everything manually might work for running long bolts down hardly used it when it was new.
You're supposed to tighten and loosen everything manually with a cordless ratchet. I've used DeWalt, Makita, Milwaukee, husky, Ryobi and every single one is this way. If you want something that breaks nuts free, you need a right angle impact.
Does that chip have over charge protection?
Yes, it protects the cell from over charge. So you could leave it plugged in for weeks or months.
excellent.. this is what i call recycling.
Torque test!
Lol. Not sure it would even register on a scale. I would guesstimate somewhere around 15 foot pounds.
@@sixtyfiveford diy
weld a rod with an eyelet to a socket, so the eyelet is 12" from the socket's drive square. Then hang weights from the rod's socket, and see how many lbs the ratchet will lift.
Average girth is 4.6 inches, so that is bigger than most.
i'm convinced this guy could even fix the nation's economy . now , if only we could get him elected .
People wouldn't like how cheap I am.
Save up to 10.000$ ? Jeez how much did those ratchets cost back in the day ?
Snap-on is gonna make you take down that thumbnail no doubt lol
Waaaaaay too confusing!!!! What are the little boards called and where do you get them???
link in the description
@@TheKajunkat Thanks....Bud Missed it
I don't know what it is about the ratchets but their so loud that I hate using them would rather use a impact driver.
So true.
Please do a revision with a bms ppls houses are gonna burn down.
The charger board is the BMS.
you gotta get a spot welder and some proper ventilation my dude....sketch city.
I would duck tape the charging port, dust off
But it's going to get filthy with dirt grease n stuff next to the power button😮
It's not a concern of mine. However, if it was they sell little USB C plugs/covers.
Or you could have used a 26650...
Yes you can use the Ni-Cad charger, just gut it and wire the lithium charger so you can use the plastic lol. Nice clickbait thumbnail...
The older I get the more I hate Snap On tools
Why tho?
That makita ratchet is absolute 🐶💩. The ratchet mechanism fails after like 5 hours of use.
I don't even know how many hours I have on that Makita. Has to be well over 100. Hasn't let me down nor have I ever heard of anyone else having issues with it.
To be a simple going man when these were new I’d do anything🥲
I did a similar conversion to the Black & Decker Versapak battery. I gutted out the battery pack and installed a 18650 that's removable for charging. Works great, more torque and power for all my tools.
👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍
Awesome