Would the 3.5” knuckle kit for a 2011 Silverado hurt any of my suspension components? I don’t do much off-roading just wanting to get more clearance, looking to see the best option. Thanks!
Any kits over 3" we recommend to get with differential drop brackets to be able to avoid the nasty cv angles. But you shouldnt see any issues with this kit inparticular!
I have an 09 Silverado LTZ white diamond edition with sunroof, navigation, factory entertainment, and power sliding rear mirror. I've never seen another one with all the options mine came with. Love it though!
Custom Offsets thanks. Also how big of a wheel/tire can I go without rubbing or trimming? (full lock turning into steep driveway) I'm think of going with 20x9 +18 on 285/65/20
I have the same setup on my truck, Same year and model. The only difference is I'm running 35s on my stock 20s any idea if I can run 20x10 on 35s with just a 3.5 lift. I'm ok with some rubbing
I just got a 2013 silverado 4wd. I’m looking to do setup similar to this. How much did this setup cost, so I can get a ball park pricing when I go to build.
Is it possible to run a size smaller but about a half inch wider than the wheels and tires shown in vid? Im looking at a 2010 and am going to put something similar on it.
Depends on the truck, but check our gallery out here for fitment help David! www.customwheeloffset.com/wheel-offset-gallery?wheel_diameter_from=20&wheel_width_from=9.0&tire_height_from=33q&sort=date
Got an 08 Avalanche LTZ with a 3.5" RC lift. Is fitting a 305/55R20/33x12.5R20 mounted on 20x8.5 going to work? Or should I go with 295's?? Any advice would be appreciated. Thx
They come with 3" fabricated blocks for the rear. You can check out this lift kit here! www.customwheeloffset.com/store/7795/rough-country-35-gm-suspension-lift-kit-w-upper-control-arms-4wd?year=2013&make=Chevrolet&model=1500
Custom Offsets it seems that when I go over a number/dip and the suspension is able to flex out fully there is a rattle in the front end, sorry if the terminology is off
I miss seeing ole Shawn do the videos! Lesssgo!
Crazy seeing a 4 year old truck with rust spots.
Would the 3.5” knuckle kit for a 2011 Silverado hurt any of my suspension components? I don’t do much off-roading just wanting to get more clearance, looking to see the best option. Thanks!
Any kits over 3" we recommend to get with differential drop brackets to be able to avoid the nasty cv angles. But you shouldnt see any issues with this kit inparticular!
Rough Country's 3.5" Lift Kit comes with fabricated rear blocks to bring it level with the front. Why add the rear block kit from ProRide?
Different sizes
It’s really rare to see that body style of Silverado with a sunroof
I have an 09 Silverado LTZ white diamond edition with sunroof, navigation, factory entertainment, and power sliding rear mirror. I've never seen another one with all the options mine came with. Love it though!
Have a 2010 crew cab ltz with leather sunroof and full console
@@JB88- I've got the exact same color and year also with the ltz z71 package sadly it doesn't have 4x4
Yeah, I think it’s only on the LTZ models. I’m grabbing one myself soon and it’s a nice little plus.
Can you give me your honest opinion about rough country lifts? I hear alot of bad things from people but i like how affordable they are ! Thanks
Puchito, they're a stellar entry level lift kit for trucks/SUV's! But they do ride a little rougher then a stock truck would
Custom Offsets thanks !! Zone or mcgaughy ?
I have a 2wd and I'm thinking about getting this, how will I benefit from the kit with new upper CA, as opposed to the one w/o? Is it better angles?
You can do with out, but its always nice knowing theres stuff with better angles in there!
Custom Offsets thanks. Also how big of a wheel/tire can I go without rubbing or trimming? (full lock turning into steep driveway) I'm think of going with 20x9 +18 on 285/65/20
Where did you find the LED lights for the truck, ive been looking everywhere and i cant find them
That norcal mod looked a little rough
I have the same setup on my truck, Same year and model. The only difference is I'm running 35s on my stock 20s any idea if I can run 20x10 on 35s with just a 3.5 lift. I'm ok with some rubbing
AJ, check our gallery out for fitment help this is what everyone else did to get 20x10's and 35's to fit- bit.ly/2eL7EMM
I just got a 2013 silverado 4wd. I’m looking to do setup similar to this. How much did this setup cost, so I can get a ball park pricing when I go to build.
Daniel, check the links out in the description!
I just ordered the same set up it ran about $3k
A 2” inch block in the rear would have it sitting the same as in the video minus the weight in the bed.
Did you have some video about chevys 2wd lifted just to give idea what setup is perfect for that trucks great videos.
Fernando, we actually rarely see 2wd chevy's up here in Wisconsin! But check our gallery out for some ideas! - bit.ly/2FpbYzV
Is it possible to run a size smaller but about a half inch wider than the wheels and tires shown in vid? Im looking at a 2010 and am going to put something similar on it.
Check our gallery out for fitment help Robert! - bit.ly/2DgLW0N
aye the topper strikes again.
Tri Fade as much as I hate it thats what it seems like, theres a lot of people with them
I like the bed of my truck plain and simple lol
How much more would this cost than just the regular RC 3.5
Link tagged in description 🤙🏼
Will I need to do a NorCal with a 3.5 inch lift, 20x9 wrapped in 33x12.50 20’s?
Depends on the truck, but check our gallery out here for fitment help David! www.customwheeloffset.com/wheel-offset-gallery?wheel_diameter_from=20&wheel_width_from=9.0&tire_height_from=33q&sort=date
Do those wheels come in gloss black?
Custom Offsets thank you
Im guessing the D610 are the gloss black
Got an 08 Avalanche LTZ with a 3.5" RC lift. Is fitting a 305/55R20/33x12.5R20 mounted on 20x8.5 going to work? Or should I go with 295's?? Any advice would be appreciated. Thx
Jesse, check our gallery out here for fitment help- bit.ly/2jM2OQ1
How much did all this cost?
What were the size of the rear blocks that come with the 3.5” kit?
They come with 3" fabricated blocks for the rear. You can check out this lift kit here!
www.customwheeloffset.com/store/7795/rough-country-35-gm-suspension-lift-kit-w-upper-control-arms-4wd?year=2013&make=Chevrolet&model=1500
So question? I see a lot of people put this kit on and it still looks like it’s nose diving. What size block would get it fully level no nose diving?
@@jusincraze9527 Usually we see the 3.5" leveling kits come with 1" rear blocks. That usually makes them sit pretty level!
Alright thanks!
I did the 3.5 rough country with the lifted shocks and I am having an issue with cv angels any insight on this ?
You shouldn't have any issues!
Custom Offsets it seems that when I go over a number/dip and the suspension is able to flex out fully there is a rattle in the front end, sorry if the terminology is off
Am I safe to run 305/65/17 on my stock 2014 silverado rims I am running a 3" levelling kit
Check our gallery out for fitment help Jordan! customoffsets.com/gallery !
would this lift fit 20x12 on 33s -44 offset
What grille is that?
Where in Wisconsin are you located
Wrightstown!
Does the tires make noise on the highway
They are fairly quiet!
Where can I buy that grill for my 2011 Chevy Silverado?
Rudy Perez that’s the stock grill that came with the Ltz trim level
@@cohenrobinson804 2012 and 2013 years only
What size is the spacer
sound ???
???
Custom Offsets 0:41
@@CustomOffsetsTV What instrumental beat is that? (Artist/producer) Sick truck btw!
Dumbest video where you pull out money to do a measurement on tires and wheels
Its meant so people can imagine how much of a lip there will be. Everyone in the U.S. knows how big a bill is.
He's gotta flex his benjamins
The bill is the signature of the house
Haters gonna hate