How To Change Dial Safe Lock To Electronic Keypad Safe Lock
HTML-код
- Опубликовано: 3 окт 2024
- How To Change Dial Safe Lock To Electronic Keypad Safe Lock. If you find your dial lock difficult to use a dial safe lock than you can swap it for a Electronic Safe Lock. Amsecurity ESL 10 - 20.
Please Click The Subscribe Button Below And Share Video With G+, Facebook, Twitter and all Your Favorite Social Media!
Comments and questions are encouraged but please be respectful.
Visit wayneslockshop.... For More tips and tricks for the Locksmith Industry
tricountylocksm...
All views and opinions are the alleged interaction with any product shown and not a fact stated by Wayne Winton and or Tri County Locksmith Service. The information shown in any video is 100% opinion of Wayne Winton and protected by the 1st amendment, the freedom of speech. Some products may be provided by the company being reviewed and others are purchased independently by Wayne Winton, Tri County Locksmith Service. Either way it does not reflect the content of the review. All products are given a fair equal chance to perform. All videos are property of Wayne Winton and all rights are reserved. If you would like to post any video please contact Wayne Winton at: Tricountylocksmithservice@gmail.com for permission.
Disclaimer: Do not try this at home! Any content seen here is for entertainment only! Do Not try anything seen here yourself or there may be danger of bodily harm or legal consequences for your actions! Any illegal activity is prohibited and Wayne Winton and or Tri County Locksmith Service are not responsible for your actions!
Wayne Winton, © 2014. All rights reserved. Publication, reproduction or distribution of this film by any means whatsoever - including without limitation electronic transmission via internet or e-mail, or re-uploading existing videos & re-uploading such material on any website anywhere in the world - is strictly prohibited without the prior written consent of Wayne Winton. Please note that Wayne Winton, Tri County Locksmith Service does not state any confirmed facts only personal opinions. Wayne Winton, Tri County Locksmith Service is not liable for any damage or loss through the use of products or techniques shown - Use at your own risk! This film and the Wayne Winton, Tri County Locksmith Service film series broadcast on RUclips is intended for entertainment purposes only.
Tri County Locksmith Service
![NOSFERATU - Official Trailer [HD] - Only In Theaters December 25](http://i.ytimg.com/vi/nulvWqYUM8k/mqdefault.jpg)
As a professional Locksmith and contractor of over 30 years with 100,000 jobs completed, I must say Wayne did an excellent job! Thank you Wayne, Danny From La Jolla Locksmith in San Diego.
I'm in San Diego. I may need your services. What's your company name? Or email? Number?
Hello
Thanks a ton for making this video, this video convinced me to do the swap myself instead of paying a locksmith $150, and I can now get into my safe in 3 seconds flat.. so much better than the combo lock that came on the safe. Thanks man!!
Literally the only video out there walking through this change out. Thank you so much! Gave me the confidence to tackle this and saved me $$
Thanks Wayne. I had problems with my Browning safe right out of the box, but it was a small fix. The electronic lock was screwed in too tight from inside the door and it was preventing the catch from locking. I came back off on the screws a tiny tad and it worked fine. I wasn't sure how that secondary dead bolt mechanism was suppose to fire to operate, but your video explained it all, plus showed me how to replace or upgrade my digital key pad. Thanks again. JD
Thank you for this video!! Im very hands on with things. My grandparents gun safe is the old spin dial lock and they want to upgrade to electronic. I started to look into some info online and found your channel. Your video has helped me tremendously!
DUDE! That info at 25:55 in the video is SUPER IMPORTANT as that is what was causing my problems. I actually had to take a Dremel tool with a circular diamond blade and cut the metal an opening around it to get it to work finally. WOW!!! THANK YOU!!!!!!!
Great video, Wayne! Thanks a bunch!!! I just installed an ESL20 on my Champion Medalist and replaced the S&G dial lock within 20 minutes. Didn't even have to redrill the relocker plate.
Thank you for your time you took to make the video. It will be a big help when I change mine over. Ty
Could you show how the relook works , thanks
I have a Winchester 24 gun safe I keep having issues with the elec. Digital locks I am going to switch it to a manual mech. Lock so I won't have anymore issues with digital issues. I am thinking on getting a canon or liberty safe next but have to be broken in with this Winchester safe presently. This video showed me I can transition from digital to mechanical. Thank you, thank you for this video. will R.
Thanks for your help!!! I got stuck at removing the key and unscrewing the dial. New lock is in place now.
Thank you! I have a gun safe that I purchased that needs the lock replaced. The bolt is missing from the inside, and I was wondering how it operated. Your video made it as clear as day.
Wayne, Thank you for your time and effort in producing this video. It was just what I needed to step through the entire process before attempting the change on my FatBoy. It was interesting to see a comment about the quality. I have a masters and a career in educational and training television and totally liked your production. It was real and not designed to be slick. It was a welcome gift from someone who had the knowledge and willingness to share. THANKS! If you are in the Denver area, I would buy you a beer!
+Bob Ingram Great to here! thanks1
Thanks! followed you step by step. As they say "easy-peasy"!!!
Still helpful in 2023 Thanks Wayne!
Really like your tutorials Wayne. Keep up the excellent work.
thx
great video, I like how you pointed out the little things that people overlook, I have a dial that didn't always work.
Great and very nice step by step direction .Supper help full ,thanks for the info .You made it so easy to understand !!!
Dude you are a life saver, thanks for the video!
Thanks Wayne, i was able to skip the locksmith and do it myself.
With the recent Liberty events, I need to go from digital to dial ( mechanical)
Can you change a field and stream 1871 the other way??? .. from a digital to a manual dial??
Great video you made it look easy have a nice holiday and thanks for sharing👍🏻
What's preventing a thief from showing up with his own keypad and wiring it in place of yours. It looks to be only 2 or 3 wires.
I have a few questions, is there any way to reach out and send you photo of a latch
I notice some locks have a rectangle/ridged bolt and some have a tapered/curved bolt. Do you know if the secuRAM electronic lock is compatible with any of the better rated S&G mechanical locks? Thank you for the great video. You seem to know exactly what you’re doing.
Will this work for a stack on safe?
Hey will that lock system work on my red head safe i got from basspro
Hey Wayne, I love your video and thanks for the great informative help. I want to ask you if I can change my Sturdy Safe mechanical S&G combo lock to digital like in this video? I am worried since it has a relocker behind the lock inside the safe as well as one on the side like in your video. Thanks again. -Alex
How did you get a hold of that spline key to pull it out they are supposed to be driven in until they are flush?
Thanks for taking the time to walk me through this. Great job.
I received an upgraded opener handle from my safe manufacturer. From the looks of the safe door, once the inside cover is off, it looks like just one nut has to come off in order to change out the opener handle for a hub/spoke handle. Is that something a layman can handle or are special skills required? It is a dial lock. Thanks
What happens if (when) the batteries die?
Great video Wayne.
Good video man!
Thanks
In the case of an Emp your electronic block is going to fail and you're not gonna be able to access your safe. Switching mine to mechanical.
Outstanding video.; very well done!!
+Thomas Gibson thx!
Winchester TS12-30? I want to change the electronics out for a mechanical lock.
How old was that safe that you replaced the lock on?
Hello I have a sentry dial safe but does not have a box in the inside like the one in the video you are replacing. Do you have a site I can use to find what I need to purchase?
Good video, thanks. Is it possible to buy a second electronic lock, set it with the combo of the original digital lock and keep the new one in reserve for when the original digital face breaks, quits working? Then could I just plug the new face in and open the safe?
Great question I would like to hear an answer
wayne, very helpful- I have one --its an SG- and I want to change it out like you did- but when I open the electronic lock, it automatically closes by itself in a few seconds. Theoretically the bolts would be open so the hole would be blocked, I am assuming it does that so that when you close the bolts it will lock by itself. Some of the bolts on the locks have one side radiused,---what does that accomplish? My lock/safe is right hand closing or whatever, and that concerns me that it might be an issue with this electronic lock automatically closing after a few seconds. Every time I have seen one installed, even on yours, its a down locking. I'm just concerned I might need that radiused kind of bolt on the electronic lock. Do you know what I am talking about? Thanks Wayne.
Nice video what electronic lock would interchange on a 45 gun Winchester safe .I'm taking dial pad out to put electronic? Thanks
nice step by step direction were is your reverse video
Play it backwards. You're welcome.
Wayne: Just out of curiosity, what happens down the line if the solenoid goes bad? How do we get into our safe? Drill into the internal lock and inset a magnet? :)
One of my ket pads went bad. The lock dude tried another one but it has some kind of failsafe and it locked down. He ended up picking it with some kind of electronic device that took awhile. I had all of mine changed to dials because electronics are a serious pain in the ass, not to mention expensive. Not much to go wrong with a dial. I can unlock it almost as fast as a keypad and its EMP proof!
Just a question I bought a Fort Knox safe from BJ’s. It has a electronic lock. I need to put a bio metric key pad to be able to get a pistol permit. What I am asking can a liberty scan logic key pad be installed.
Wayne, great video. Do you know what electronic keypad I would need to replace the manual dial on a Cannon Model 12 Fire-beater safe? Thanks
found it, thanks for all your time
thanks for watching!
Would I be able to take a picture and send it to you and you tell me if the lock is replaceacle?
I have an old sears group 2 lock. Would it work to switch it?
I have a Stackon fire and waterproof safe its from a big box store... any chance i could put a ESL lock on it? Thanks
Is there any biometric locks you would recommend?
lost conbenation any chance in getting it open
Thanks for the vid!
+Brady ss share and subscribe!
what kind of failures do you see out of these electronic locks? I use one of those AMSEC locks at work everyday, multiple times a day, and haven't had any failures in 8 years. I'm surprised it has been so reliable.
Amsec is the best one and the only one I recommend
How about showing from ELECTRONIC to DIAL?
I have a big safe with a Seargent & Greenleaf dial lock and its hard for me to see and open so Im looking at replacing it with a keypad. Is that the best brand to buy?
Did you ever figure it out? I have an old Treadlock safe with a dial lock that's aggravating to see in my basement.
good guide. The anxiety of watching you push on that door after telling us to be careful and not close the door was agonizing.....
Nice. if relocker is giving a person a hard time can you just disable it/take it out ?(understanding you have lessened the security of course.) Also, roughly how long /many Cycles does the solenoid last for before you become locked out with digital locks?
Removing the relocker can be done but it is highly NOT advised. As far as cycles go theya re all diffrent. a good estomate is 25,000 to 50,000 or 5 years depending on use.
I want to change my keypad to a spin dial because I am concerned it will break and leave me locked out, and the spin dial i believe is MUCH more reliable. I cant figure out how to take sheet rock off inside of Champion door without breaking it.
You have the right idea. I had all of mine changed to spin dials and have never regretted it.
Visit wayneslockshop.com/ For More tips and tricks for the Locksmith Industry
Thanks...
Great video!! I have a field and stream model: HEH00354. Do you know if I can swap the manual dial for a electronic keypad? I wasnt sure if field and stream sold the electronic keypad or I could buy any electronic keypad from greenlee or someone.
Thanks for the video and any assistance.
Curt Smith email me pictures
Did you ever change it on your field and stream?
should any safe with a electronic lock system also have a backup key option?
SecuRam makes one with a mechinical back up. It's not a key but there is a regular mechanical dial back up option. SecuRam extrem mechinical redundant safe locks
After the 5th “uh” I exited the video
I have an older stack-on safe with a dial, can this be upgraded to take a keypad?
@Gregg Sinini Thanks for *NOT* answering his question.
Anyone know the answer?
What are your thoughts on the durability and functionality of the S&G Titan and Spartan D-drive and Pivot electronic locks? How do they compare to the S&G 6120 series?
Anything is better than 6120. Spartans have been pretty good to me
Thank you.
Wayne Winton Great video, but when I tried I found out the factory broke off the 12 o'clock screw, not sure what to do, so I put the dial lock back on for now, any ideas?
My Winchester digital pad locked me out. Winchester customer service number says hi call volume email customer service. Meanwhile I'm locked out of my safe with no way to get in. Next safe will be a dial and not a Winchester.
In future videos, please don’t rush your camera movements, make sure the camera catches what you are wanting to catch, and ensure your lighting lights the area focused on. Your video was terribly frustrating to follow along.
Will that keypad work on my cannon p40 patriot and cannon sh5540 safe both have the touch electronic keypads now.
it should. The bolt pattern should be the same. Just check clearance on bolt wotk touching the lock bolt.
Cool except backwards 😎
Wayne, I have a Winchester safe ('09) and the zero key stopped working. Fortunately the safe is open and I have ordered a replacement from Winchester. Is it very hard to change electronic keypad/electronic keypad.? Thanks........Glenn
this video shows the motions. It's the same thing to replace a direct replacment. For me it's not to bad but you have to make the final desition. If this video look complicated don't try it just hire a professional locksmith. Find one on the ALOA "find a locksmith web page : Here: findalocksmith.com/
Wayne. the electronic lock I'm replacing is a GSP, an '09 model with the three lights. If I want to replace it with a combination mechanical lock what would be a good replacement and where is the source to purchase it. Thanks.
An interesting modification might be to leave the dial lock in the original place and mount the keypad lock to the left of it (as viewed from the outside). There looks to be enough room there to do it, but you would need to cut a slot in the bar for the mechanism's dead bolt to go through and possibly a mounting pad that attached to the inside of the door like is already used in the existing lock. This would allow you to just lock the safe with the keypad when you are home so that you could gain access to your firearm quickly, but to lock it with both locks when you are going to be away from home for any length of time and fast access to your firearms is not a concern...
It looks like you have that safe in your garage though... Even if it is bolted down, that's not that great of an idea... You are putting the safe in a place where they can use a vehicle to pull it from the concrete and just drag it onto a truck or trailer, plus you are putting it in a location where you are likely providing them with all the tools they might need to gain access to your safe, just in case they didn't bring the necessary tools with them... Of course, there's also the issue of it not being a climate controlled environment...
Or have an actual safe like a tl30 not this crap you can break into and carry with 4 teenagers
One thing to be concerned about with keypad locks is whether the logic board is located inside the lock with the locking mechanism or if it is located outside the unit under the keypad. Locating it outside the unit under the keypad is a VERY POOR DESIGN since it most likely means that the wires feeding through the face of the door are just providing power to move the solenoid and if you remove the keypad, you could provide power to the appropriate conductors and the solenoid would activate even without entering the combination... It's a pretty basic concept, but there are still some cheap safe manufacturers out there that make this mistake...
Small vise grips and screwdriver to remove the spline key. When your E Lock fails remember the orientation VD when you reinstall the mechanical lock. And don't forget, now you have made your safe so much faster to drill by installing a digital lock, less than 30 minutes depending on the hardplate. Just for fun, if you call Amsec and get the drill point for that particular safe, the final step shows using scissors.
Why would anyone change a dial to an electronic anything? Thats silly. I had all of mine changed to dials. When the keypad went bad on one it was almost impossible to open. Some crazy electronic thing got it open in about an hour and $300 later.
Hi... my brother killed my father and then "pulled the pins" on his fortress combination safe... how do you even pull pins?? He then paid someone to weld them back together...
Help me to understand please
I can send videos and pictures
Do you happen to know if the Liberty Revolution series is able to be changed from a Dial to Digital?
They can be changed. I don't know if you can buy them with a digital lock though.
the freakin music is 50 times louder than the voice...turn that crap down
Your video demonstration on the relocker is not the best and hard to understand what you did and the purpose of the relocker
Prison undies 😂😂😂
Good video. But it really looks like none of these locks are really secure.
American Security Amsec big red safe locks like this one are pretty good. These safe locks are pretty secure it's the safes job to protect the lock from attack.
Also remember that these are not "safes". They are "residential security containers". That steel on the door is too thin to be classified as a "safe". You would pay a lot more for a true safe and it would start out being rated at a UL TL-15 rating. That's 1" of steel in the door and body. For the size of "safe" that he has here, that would probably mean a starting price of around $4K.
I can barely hear you
Not very prepared are you.
You need to go back to Locksmith School..
I lost the conbenation for my S&G 360-321 safe and also lost the original one to
Take that darn relocker out it can be expensive if it trips pretty much means new safe.
So any idiot can punch the lock and open the safe. He’s a real locksmith we are in business to provide security not remove it. And it doesn’t mean a new safe. It means you call one of us to open it.
@@josephneece17 if “one of us” can open it, what’s to keep “one of them” (thieves) from using your same techniques?
can i get that 29 minutes back
I'm leaving a comment because I really wanted to have ur knowlege but the poor sound quality, ur work in very poor lighting & the camera jostling back & forth forced me to call it quits.
I have made many professional training videos, a few tips as folllows: cut the camera movement by 90%, draw into a medium shot, leave it there, no ones is intersted in seeing a good pic of ur left shoulder or ur hands working in a shadow,(2) set ur lights so the point of interest is lit at all times, do not cross in front of lights or camera ( 3 wear a wireless mic, ur sound rose as u drew the camera in, then fell off dramatically when drawn back, also sound was further complicated by noise on the video (4 ) Most important, sit down with a pen & paper & make a storyboard script, detail camera position, lighting position, ur position & script the entire video from fade in to fade out finish, script the subject & what u will say, coordinate ur words with individual cameos, for instance, make a shot of u pulling the main pin showing ur hands & the parts, pair it down to the info only, that's what people want not pics of ur smiling face, hands, shadows or shoulders. Writing a script is thoughtful planning for the best product, it forces u to give it ur best thoughts, isn't that what "quality" is about?
Thanks for the feedb but You just don't get my style. It's rough and raw and also real. It is intentionally not to be designed of production quality studio unscripted. and yes video person that must be annoying but to the average person who simply looking for something to tell them how to do what it is they need to accomplish it works well.
Make your own video then. I dont see anything wrong.
This aint hollywood.
He is a locksmith not a movie director.