Auto-resizing video and images in Adobe Premiere Pro
HTML-код
- Опубликовано: 5 сен 2024
- Auto-resizing video and images in Adobe Premiere Pro
This tutorial shows you the three different settings for resizing imported media and how some settings may make your export look soft or slightly blurry.
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
QUESTIONS?
► videorevealed....
Visit NVIDIA RTX Studio
► www.nvidia.com...
Check out BELECO photo backgrounds
► www.amazon.com...
Artlist Music
bit.ly/vidreva...
Artgrid Stock Video
bit.ly/vidreva...
Motion Array
bit.ly/vidrevm...
FXhome
bit.ly/vidrfev...
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
THANKS!
😃 To all the wonderful people who have supported VideoRevealed 😃
Once I learned "Set to frame size," I never went back to "Scale…" You just never know when you may want to zoom an image in a little closer, even if only to better center a person that's supposed to be in the middle. Choosing "Set" allows you to do this without losing that little bit of quality, which is always nice.
Yep, I never use Scale.
Hands down most respectable instructor on RUclips. Thanks again for another detailed and easy to follow tutorial.
- Subbed!
AND again fixing an everyday thing for me. I'm going to have to start mowing your lawn!
Thanks Peter, you're welcome to anytime. 😅
If you really want to notice the difference, put a "scaled" 4K video into a 1080 sequence, and then, copy and paste the scaled a video from the timeline into a 4K sequence. The scaled video will be smaller than the 4K dimensions, and if you increase the scale of that video back to the original 4K dimensions, the pixelation will be prominently noticeable - the equivalent of scaling a 540p video to fill in a 1080p sequence.
Yeah, that's going to make it look bad for sure.
Thanks Colin! This used to confuse me but now I embrace it. I am working on my second documentary; working in a 1080 world but shooting 4K. It is great to bring in the media at "set to frame size" so that if I shot a medium shot I can if I need to, bring it up from 50% to 100% - get a close up and not lose any resolution!
Absolutely that's the best way to work.
Let's say we take a 45MP image. Import it into Premiere. Where will there be less load on the computer? If to do scale to frame size or set to frame size?
Technically yes, but depending on your computer, you may not see any performance gains.
So if I shot at 4K, knowing I wanted just a portion of that frame to keep higher resolution for an eventual 1080p export, (a close up section of the original 4K frame, scaled up to fill the frame of 1080p), then "Set to frame" is the way to go? I hope I am explaining this properly if the whole point is hoping to have a close up section fill the screen but retain more detail then if I had just scaled up an original 1080p shoot? And the key would also be to start off making sure the sequence is 1080p even if I drag 4K clips into it? Just want to be sure my brain is understanding. thank you.
I think I watched an older version of this topic on your channel just last week!
Yes, I thought it needed an update.
Found a bug (I think).. two clips, different sizes. Create MultiCam - doesn't work.
thank you for your videos every day, Mr Smith.
Glad you like them!
@@VideoRevealed yes i do.
Sir, Can yo help me? I am trying to import a video in to pro from my trial cams. The format is MP4, ratio is 1080x1920, I have no other problems playing htese videos on my phone or on any other platform on my computer. When I import them into adobe, they show up as a large green screen with the video in a very small impossible to see square in the upper left hand corner of that selected section. It only does this to the videos from my trail cams. I'm at a complete loss of what to do. If you can help me, I'd greatly appreciate it, there seems to be no logical reason why this is happening.
As usual you explained a confusing thing in Premiere Pro , very clear ,very simple to understand and use!
thank you!
Also the quality of this video is amazing and very sharp crispy! well done!
Thanks so much.
Thanks dude wanted to make something like a slideshow with some 16:9 images I had made on Photoshop and I was too bored to resize everything manually in premiere pro since they came in the timeline bigger than 16:9
Thank you.Mathis is very helpful
Glad it was helpful!
Mr. Colin thank you for all the information you have shared, I've learned so much from you about using premier pro over the last few years.
Great to hear!
Thanks, almost had a panic attack on the jpeg quality after import, but this helped.
Wow this saved me hours HOURS!!! Thank you for the detailed explanation!
Glad it helped!
amazing video, but I hope you can possibly help me out with something similar. the zoom in this video was super crispI have a 1080p video that i cropped and scaled for a zoom effect, but the text is blurry and washy. i couldn't quite find something that could fix that, so what did you do for the crisp zoomed text?
*[QUESTION]* Could you record tutorial how to edit video's for tik tok and instagram reels and insta video as well?
Maybe I'm missing something but the only thing that's different is the frame size and duration?
@@VideoRevealed you're right!
Thank you for this....I am new to creating YT content and I messed up my first video with a simple misspelling of a name and had to go back to the original Photoshop background image and correct it but when I brought the corrected background image into Premiere everything was completely messed up. So I am starting from scratch sort of.....You mentioned setting PhotoShop files to proper size but you didn't say what those sizes should be. Could you please elaborate? I also have another question about importing PhotoShop files without flattening the layers. I know PhotoShop files can be imported into Premiere without flattening the layers but can that file be used with the layers intact in the timeline in Premiere? I ask this because if that can be done then if I ever have to make a correction to something in a PhotoShop file in the future it would be handy to have those layers left intact so I can just right from Premiere use the feature that lets you "edit in PhotoShop". If you use that feature and make and save the changes to the PS file, close out of the file in PS and return to Premiere will the changes show up on the file in PP? I am hoping the answer is yes because that would be really useful.
Thanks that was something I did not know
Thanks for watching.
Excelente. Thank you. If i have a shoot film in HD video, and i want to export for a projection room film, (digital cinema projector), what have to do ? What should I do to preserve the aspect, and the image quality when enlarging it?
There are no special settings for increasing the scale. It's going to look the same no matter how you increase that number.
Hello! Can you help me please? How can I zoom in the picture with keyframes without changing the frame size?
I'm not sure exactly what you're asking but try this:
ruclips.net/video/tYMo9Aw3u7s/видео.html
@@VideoRevealed This is exactly what I needed, thank you so much!
just noted that the lighting is enhanced, thanks colin
You're welcome.
Thank you
Thanks man...!
This really saved me a ton of time! Thanks a million! :-)
so what is classed as pretty powerful computer nowadays?
tiny.cc/dm1suz
hi, may i ask? Do you mean that as a default "scale to frame size" will be better than " set to frame size" since bigger size footage will be automatically scale down as shown in your video from 100% to 50%?
They both resize your media. Scale to frame size is best used if you won't resize your media again after the initial resize. I never use that setting and do just fine.
I always set to frame size.
Me too. But usually just do stuff manually.
Very helpful! Thanks!
You're welcome.
15:20 That's not necessarily true. I've been wrestling with a fill frame effect with pictures since I started working on premiere about half a year ago despite using scale and set to frame size. I came to this video precisely to see how I can hopefully fix this issue I've been having. I never knew about the media setting so I'll check that one out today
There is no fill frame anywhere in Premiere Pro.
@@VideoRevealed That's true, there's no fill frame feature or effect, but prior to this video (huge THANK YOU to helping me finally conquer this headache of mine!) I wrestled with certain images being scaled to fit the width of the screen (but not the height) and became severely distorted. I wish I could link to external sites, because I have an example...not that it's completely necessary anymore because again, this video FINALLY solved that issue for me. So again, a huge thank you!
Wow... I've played around with these settings for quite some time now. Never knew the essential differences. But those details are so, so important!
So if set to frame size is usually the best option between the two, when is scale to frame size more preferable than set? Also, is it best to set the default media scaling at none?
Thanks for this Colin. You're one of the few that can very well unveil the enigma that is Adobe haha.
I leave it up to you to decide but for me, I leave it off and scale manually in the Effects Control Panel. But, I don't deal with a lot of images so maybe a documentary editor might choose Scale to Frame Size.
@@VideoRevealed got it thank you!
@@VideoRevealed ¿tal vez sea porque se utilizan muchos formatos diferentes en un mismo documental?
Thanks
Thanks so much.
THANKS !!!
You're welcome.
thankkk youuuuuuuu
ty good sir
Might have been better to summarize up-top that for 99.999999% of pro users, Set to Frame Size is the only thing to use, never Scale to Frame Size.
Well, I'd consider the editors at ABC Hollywood professionals and they use Scale to Frame Size.
Have you tested this on export to make sure it isn't just happening in the editor?
There's no need to test. The display is the same as the output.
@@VideoRevealed Well that's not always the case. Like for example, there's the "maximum render quality" setting which changes the scaling algorithms, there's the high quality playback checkmark that changes how the preview window looks, there are proxies, and I expect there are probably other optimizations that make preview quick that are turned off during encode for a more accurate export. I may have to test this on export because I'm curious if the scale to frame size is only an optimization for performance reasons during live playback, similar to a proxy, or setting the preview monitor to a lower resolution, rather than something that necessarily affects export.
@@AndyGilleand I think you are comparing a one-to-one where an image that is scaled to 1080p looks the same as an image that is set to 1080p. The difference, however, is in the flexibility when editing these files. For instance, when I am editing music videos, I will use the "Set" option when dropping 4K video into my 1080p project. This allows me to zoom in on different areas of the video without losing any quality, as I could just increase the scale to, say, 80% of the original video size.
If I imported the 4K video using the "Scale" option; however, I would not be able to zoom in the video without losing quality, particularly if I want to increase a certain area by, say, 50% or more - everything starts to get blurry using the scale option.
When I encode the projects, there is a noticeable difference in clarity between a segment that was zoomed in from a "scaled" video as opposed to a "set" video.
I accidentally clicked out of the window and lost your screen.
Don't ever do that to me again hah.
I'm really struggling with this.. Comprehension is a rea- oh look a butterfl