Ford 1.0 P4JD P4JA P4JB P4JC Timing guide WITHOUT TORQUE MULTIPLIER!!
HTML-код
- Опубликовано: 29 авг 2024
- Hey there and thanks for watching my video :) A viewer told me that he does the belt without the torque multiplier which is a very expensive tool. So I will be doing it with a normal and a heavy torque wrench. First 70NM with the locking pin, and 300NM without the locking pin, and finish it off with a 90degree turn.
I can confirm this works with the SFJA, SFJB, SFJC, P4JD, P4JA, P4JB, P4JC engines.
Click this link to see the full video WITH the torque multiplier: • FORD 1.0 EcoBoost SFJA...
Part numbers:
Crankshaft bolt part number: Ford 1791421
Crankshaft seal: Ford 1812510
Valve cover seal gasket: Ford 1761118
Oil plug seal: Ford 1005593
Exhaust gasket: Ford 6642511
Turbo exhaust gasket: Ford 1762273
Crankshaft pulley washer: Ford 1870533
Timingbelt set with pump: KP1T359HOB - Gates
Engine oil: 65612 - Champion
Oil filter: F026407203 - Bosch
You can contact me at futyi95@gmail.com
Like, share & subscribe :D
Well done, this works, you don't need to buy the multiplier. I personally only rely on the flywheel locking tool for the final torque/angle, I remove all other tools, but for sure this method is a solid alternative for the torque multiplier.
👍
Great job Nicholas, and thanks for sharing. Hey, in my view, a breaker bar with a pipe on the end counts as a 'torque multiplier'... ;-)
Technically it is xD
Sacré travail respect
I’ve recently replaced the wet belt on my 1.2 PSA engine, I also relied on the locking pin to hold the crank, I was so worried it might of caused the cast aluminium bell housing to crack though under the stress
Same xD I was anxious hahaha
Can you undo the crankbolt without the multipler?
Yes.